Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White
Batteries Included: 1
Binding: Tools & Hardware
Item Dimensions: 575575150
Number Of Items: 1
Features Product :
l Dual sensor contains both a photoelectric and ionization sensor
providing dual sensor protection in your home
l Hush feature temporarily silences nuisance alarms
l Battery backup provides protection even during a power outage
l Red LED flashes every 30-40 seconds to indicate that the
smoke alarm is operating properly
l Test/Reset button tests units electronic circuitry and horn
Read More Features »
Kidde 120V AC Dual Sensor Smoke Alarm with Battery Backup The Kidde PI2010 Battery-Operated Dual Sensor Smoke Alarm
combines photoelectric and ionization sensing technologies into one unit to offer broad detection against smoldering and flaming fires.
Experts recommend that for optimal protection you have both types of sensing technology in your home. This smoke alarm's trademarked
Hush feature allows you to silence nuisance alarms, while an indicator LED and test feature let you easily confirm that the alarm is
Dual-Sensor Technology for Improved Safety
Experts divide home fires into two groups: flaming and
smoldering. Flaming fires result from flammable liquids and
cooking accidents, while smoldering fires most often occur
when smoking materials, such as cigarettes, are left
unattended. Ionization smoke sensors may detect smaller,
less visible fire particles, like those produced by flaming fires,
sooner than photoelectric sensors. However, photoelectric The Kidde PI2010 Smoke Alarm:
sensors are may detect larger, more visible fire particles, such
as those produced by smoldering fires, sooner than ionization l Employs both photoelectric
sensors. Each must pass identical performance standards to and ionization sensors.
obtain third-party approval and meet Underwriters l Features a hush button to
Laboratories (UL) 217, the independent standard to which silence the alarm for non-
alarms are listed. Because you don't know what type of fire emergency situations like a
With two different sensors, you'll get you will have in your home, experts recommend installing smoky dinner.
warnings sooner no matter the kind of fire.
View larger. both types of technology for optimal protection. l Compact design blends in
seamlessly with your home
l Wire-in smoke alarm with 9V
Experts Recommend Protection from Both Types of battery backup.
Virtually every recognized fire authority recommends the
installation of both ionization and photoelectric alarms in
order to maximize protection from either flaming or
smoldering fires. Kidde offers photoelectric smoke alarms, ionization smoke alarms, and dual
sensor alarms, which combine both technologies in one unit. Regardless of the technology, the most
important thing is to ensure that you have working smoke alarms on every floor of your home,
inside each bedroom and outside sleeping areas. Studies show placing alarms in both bedrooms and
hallways could increase a family's escape time by up to 15 minutes.
Be assured of your home's safety with the
PI2010 smoke alarm. View larger.
Fire Authorities recommending both smoke alarm technologies:
l National Fire Protection Association (NFPA)
l International Association of Fire Chiefs (IAFC)
l U.S. Fire Administration (USFA), the National Institute of Standards and Technology (NIST)
l Consumer Product Safety Commission (CPSC)
l Consumer Reports
l National Association of State Fire Marshals (NASFM)
l Underwriters Laboratory (UL)
Trademarked Hush Feature for Convenience
By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked
This feature desensitizes the alarm for approximately seven minutes. During this time, the alarm chirps every 30 to 40 seconds. If the
smoke is too dense, the Hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven
minutes. This convenient safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe situation.
Wire-in Smoke Alarm with Reliable 9-Volt Battery Backup, Indicator LED, and Test Feature
Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate
that it is operating correctly. For additional peace of mind, the alarm contains a test/reset button that enables you to periodically test its
circuitry and horn.
The PI2010 is a wire-in smoke alarm with 9V battery backup, which provides continuous protection against smoke and fire hazards even
during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before
losing power, letting you know it's time to change the battery.
The unit measures just 5.75 inches in diameter and 1.8 inches deep, and it features a neutral, white finish. It features tamper resist features
to deter vandalism or theft.
This dual-sensor smoke alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty.
About Kidde: A UTC Fire & Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to
advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to
the development of the world's first wireless networked smoke detectors in 2004.
What's in the Box
Dual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, 10-year limited warranty,
and bilingual user's manual.
The Kidde PI2010 is a breeze to operate and has a hush feature to temporarily silence alarms.
Read More Details about Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White