Index MDSGritec-C
Classification C4 Nickel alloys General description Type GRINI S/T-209 GRINI S/T-NCF 9 Shielding gases (acc. EN 439) GRINI S/T-NiCu GRINI S/T-Nickel Approvals Paginanr. 218 219 220 221
Chemical composition (w%), typical, wire Mechanical properties, typical, all weld metal
Condition As welded Typical values Yield strength (N/mm2) Tensile strength (N/mm2) Elongation (%) Impact ISO-V(J)
Materials to be welded
Packaging
Process Unit Sizes (mm)
other sizes and packaging on request
Liability:
All information in this data sheet is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.
217
GRINI S/T-209
Classification
AWS A5.14/A5.14M-97 : ER NiCrMo-3 ISO 18274-01 : S Ni6625 (NiCr22Mo9Nb)
General description Solid wire for welding of nickel alloys Extreme resistance to various corrosion forms High chromium and molybdenum content Shielding gases (acc. EN 439)
GTAW/GMAW I1 I3 Inert gas Ar(100%) Inert gas Ar+ >0-95% He
Approvals
GTAW GMAW C 0.02 TÜV + + Mn 0.06 UDT + + Si 0.07 Ni 64 Cr 21.9 Mo 9 Nb 3.5
Elongation (%) 35 34 W.Nr. 1.4876 2.4605 2.4816 2.4856 2.4858 1.4529 2.4951 2.4952 1.4539 1.4558 1.4859 1.5680 1.5681 1.5662 1.5637
Chemical composition (w%), typical, wire
Fe 1.7
Impact ISO-V(J) +20°C -196°C 130 100 80 60 UNS N08800/-10 N06600 N06625 N08825 N06075 N07080 N07750 N08800
Mechanical properties, typical, all weld metal
Condition Yield strength As welded (N/mm2) 520 Typical values GTAW (I1) GMAW (I1) 520 Tensile strength (N/mm2) 800 770
Materials to be welded
Steel grades NiCrMo-steel type 625 and welding dissimilar high NiCrMo-steels for corrosion and heat resisting purposes BS 1501 DIN 17444/17465 3076 SEW 595/680 NA 15 X10NiCrAlTi32 20 NiCr22Mo NA 14 NiCr15Fe NiCr22Mo9Nb NA 16 NiCr21Mo X1NiCrMoCuN25 20 6 NiCr20Ti NiCr20TiA1 X1NiCrMoCu25 20 5 X2NiCrAlTi32 20 G-X10NiCrNb32 20 12Ni9 GS-10Ni19 G-X8Ni9 10Ni14 Special advice: see NiCro 31/27 ASTM / ACI Alloy800/800H B168-Alloy 600 B443-Alloy 625 B424-Alloy 825 Alloy 75 Alloy 80A Alloy X750 Alloy 800L A333-5%Ni 5%Ni cast A353-9%Ni cast
Low alloyed steel
K81340
Packaging
Process Unit Sizes (mm) GTAW 10 kg tube GMAW 15 kg spool B300 Liability: 1.0 X 1.2 X
other sizes and packaging on request
2.0 X
2.4 X
All information in this data sheet is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. MDS Grini S/T-209
3
218
GRINI S/T-NCF 9
Classification
AWS A5.14/A5.14M-97 : ER NiCr3 ISO 18274-01 : S Ni6082 (NiCr20Mn3Nb)
General description Solid wire for welding nickel based alloys, dissimilar metals and cladding High resistance to oxidation and high impact toughness at low temperature
Shielding gases (acc. EN 439)
GTAW/GMAW I1 I3 Inert gas Ar (100%) Inert gas Ar+ >0-95% He
Approvals
GTAW GMAW C 0.03 TÜV + + Mn 3.1 UDT + + Si 0.08 Ni 72.5 Cr 20.5 Nb 2.6 Fe 0.8
Elongation (%) 40 35 W.Nr.
Chemical composition (w%), typical, wire
Cu 0.01
Impact ISO-V(J) +20°C -196°C 150 120 150 50 UNS
Mechanical properties, typical, all weld metal
Condition Yield strength As welded (N/mm2) Typical values GTAW (I1) 400 GMAW (I1) 390 Tensile strength (N/mm2) 680 640
Materials to be welded
Steel grades Ni-base high Cr alloyed steel for low and high corrosion searching application BS3076 DIN 17744/17465 SEW 595 Na 14 NiCr15Fe LC-NiCr15Fe NiCr20Ti NiCr20TiA1 X10NiCrAITi32 20 NiCr23Fe X12NiCrSi36 16 G-X40NiCrNb35 25 G-X40NiCrSi35 25 ASTM/ACI B366 B168-Alloy 600 Alloy 600L Alloy 75 Alloy 80A Alloy 800/800H Alloy 601(H) 330 HP
Na 15 Na 17
2.4816 2.4817 2.4951 2.4952 1.4876 2.4851 1.4864 1.4852 1.4857
N06600 N06600 N07080 N0800/10 N06601 N08330
Un- and low alloyed heat and creep resisting steel to stainless steel Special advice: Limit heat-input (HI<1,5KJ/mm) and interpass temperature (Ti<150°C)
Packaging
Process Unit Sizes (mm) GTAW 10 kg tube GMAW 15 kg spool BS300 Liability: 1.0 X 1.2 X
other sizes and packaging on request
2.0 X
2.4 X
All information in this data sheet is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. MDS Grini T-NCF 9
2
219
GRINI S/T-NiCu
Classification
AWS A5.14/A5.14M-97 : ER NiCu-7 ISO 18274-01 : S Ni4060 (NiCu30Mn3Ti)
General description Solid wire for welding Monel and NiCu-alloys to mild and low-alloyed steels High resistance to seawater corrosion
Shielding gases (acc. EN 439)
GTAW/GMAW I1 I3 Inert gas Ar (100%) Inert gas Ar+ >0-95% He
Approvals
GMAW GTAW C 0.10 TUV + + Mn 3.3 Si 0.6 UDT + + Ni 64 Cu 29 Fe 1.5 Ti 2.4
Elongation (%) 40 35 Impact ISO-V(J) +20°C -196°C 160 140 150
Chemical composition (w%), typical, wire rod Mechanical properties, typical, all weld metal
Condition Yield strength As welded (N/mm2) Typical values GTAW (I1) 350 GMAW (I1) 300 Tensile strength (N/mm2) 550 500
Materials to be welded
Steel grades BS3076 DIN 17743 NA 13 NiCu30Fe G-NiCu30Nb NA 18 NiCu30Al W.Nr. 2.4360 2.4365 2.4375 ASTM/ACI Monel 400 Monel K500 UNS N04400 N05500
- The GRINI T/S-NiCu is also applicable for welding carbon steels to CuNi and NiCu alloys
Special advice
Limit heat-input (HI< 1,5KJ/mm) and interpass temperature(Ti<150°C)
Packaging
Process Unit Sizes (mm) GTAW 10 kg tube GMAW 15 kg spool B300 Liability: 1.2 X
other sizes and packaging on request
2.4 X
All information in this data sheet is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. MDS Grini S/T-NiCu
2
220
GRINI S/T-NICKEL
Classification
AWS A5.14/A5.14M-97 : ER Ni1 ISO 18274-01 : S Ni2061(NiTi3)
General description Solid wire for welding pure nickel and nickel alloys and joining these materials with unalloyed/low-alloyed steels Suitable for surfacing carbon steels
Shielding gases (acc. EN 439)
GTAW/GMAW I1 I3 Inert gas Ar (100%) Inert gas Ar+ >0-95% He
Approvals
GTAW GMAW C 0.02 TÜV + + Mn 0.4 Si 0.2 UDT + + Ni bal. Ti 3.1 Fe 0.06
Elongation (%) 30 30 Impact ISO-V(J) +20°C 120 120
Chemical composition (w%), typical, wire Mechanical properties, typical, all weld metal
Condition Yield strength As welded (N/mm2) Typical values GTAW (I1) 250 GMAW(I1) 250 Tensile strength (N/mm2) 460 460
Materials to be welded
DIN-classification Ni 99.6 Ni 99.8 Ni 99.6Si Ni 99.4Fe Ni 99.2 LC-Ni 99 LC-Ni 99.6 NiMn 10 NiMn 5 W.Nr. 2.4060 2.4050 2.4056 2.4062 2.4066 2.4068 2.4061 2.4108 2.4116 ASTM/ACI
Alloy 200 Alloy 201 Alloy 205
Packaging
Process Unit Sizes (mm) GTAW 10 kg tube GMAW 15 kg spool B300 Liability: 1.2 X
other sizes and packaging on request
2.4 X
All information in this data sheet is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. MDS GRINI S/T-NICKEL
2
221