MATERIAL SAFETY DATA SHEET
1335 Dust Absorber
For MSDS update: 1-800-361-7691 By the criteria of the CONTROLLED PRODUCTS REGULATION this material is a CONTROLLED PRODUCT I MATERIAL IDENTIFICATION AND USE Supplier Identifier: Wood Wyant Inc., 2345 Autoroute des Laurentides, Bureau 100, Laval, Quebec H7S 1Z7 Trade Name: 1335 Dust Absorber WHMIS Class: D2B Recommended Use: As a water based dust absorber treatment for dust mops and cloths Health Rating: 0 = Insignificant 2 = Moderate 4 = Extreme Health:0 Flammability: 0 Special Warning: None II 1 = Slight 3 = High Reactivity: 0
VI TOXICITY DATA Primary Route of (Entry) Exposure:
Inhalation: Eyes: Skin: Inhalation of spray mists may cause irritation to nose and throat. Will cause irritation of eye on contact. Prolonged contact with product may cause drying of skin; may cause skin irritation to individuals with sensitive skin. Will cause irritation of mouth and throat; may cause nausea, vomiting, cramps and diarrhea. As above None known
VII FIRST AID Inhalation: Remove to fresh air.
Eyes: Immediately flush with cool water. Remove contact lenses, continue flushing for 15 minutes, holding eyelids apart to ensure rinsing of the entire eye. Contact a physician. Rinse affected area with water. If irritation persists, contact a physician. DO NOT INDUCE VOMITING. If victim is conscious, rinse mouth and give 1-2 glasses of water. Consult a physician immediately. Never give anything by mouth to an unconscious person.
T.L.V. LD50/ 4090 mg/Kg (oral-rat) LC/50 CAS % 0.1-1.0 N. Av. 1200 mg/Kg 497-19-8 (mouse – 2 hr)
III PHYSICAL DATA Physical State: Liquid Vapour Density: N.Av. Odour: Floral bouguet % Non Volatile: 1 - 2 pH: 10.4 – 10.6 Colour: Blue/green Clarity: clear Density: 1.02-1.025 Boiling point: 1000C Viscosity: Water thin Solubility in Water: 100% IV FIRE and EXPLOSION DATA Flash Point (ºC TCC): None Hazardous Combustion Products: None Extinguishing Media: As for surrounding fire. Unusual Fire and Explosive Hazards: None Special Procedures: None
VIII PREVENTATIVE MEASURES
Gloves: Eye Protection: Other Protective Equipment: Wear rubber or plastic gloves for prolonged or repeated contact. Wear safety glasses. None normally required.
Local Exhaust: Not required. Small spills can be flushed down drain with plenty of water. Large spills should be absorbed with absorbent material and placed in suitable containers for disposal. Review Federal, Provincial and Local government regulations for disposal. In accordance with Municipal, Provincial and Federal Regulations.
Leak and Spill Procedures:
Handling Procedures and Equipment: Remove and launder contaminated clothing. Do
not breath spray mists. Wash skin after contact. Avoid prolonged and repeated skin contact.
V REACTIVITY DATA Stability: Materials to Avoid: Hazardous Decomposition Products:
Stable None Oxides of carbon
KEEP OUT OF REACH OF CHILDREN. Keep containers closed. Keep from freezing.
N. Ap. = Not applicable N. Av. = Not Available
IX ADDITIONAL INFORMATION TDG Shipping Name: Not dangerous by classification Prepared by: Technical Department Date: August 2005 Revision based on updated data from Suppliers