690

Document Sample
690 Powered By Docstoc
					IPAC
PRODUCT NAME
EFFECTIVE DATE

MATERIAL SAFETY DATA SHEET
IPAC LWT D-15
January 1, 2007 SECTION 1 - PRODUCT IDENTIFICATION AND USE PAGE 1 OF 3

PRODUCT NAME IPAC LWT D-15 PRODUCT USE Scale inhibitor MANUFACTURER IPAC CHEMICALS LTD. 1620 West 75th Avenue Vancouver, B.C. V6P 6G2

TDG SHIPPING NAME Corrosive Liquids, N.O.S. (sodium hydroxide) TDG CLASS 8 II UN/PIN NUMBER 1760

HMIS RATINGS Health Flammability Reactivity Personal Protection WHMIS CLASS D2B E

2 0 0 X

EMERGENCY TELEPHONE NUMBER (CANUTEC 24 HOURS) (613) 996-6666

SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS Sodium hydroxide Sodium salt of acrylic terpolymer APPROX. CONC % 1-5 7 - 13 C.A.S. NUMBER 1310-73-2
Unavailable

EXPOSURE LIMITS 2 mg/m3 TWA Not established

LD50/LC50 - SPECIES AND ROUTE LD50 (oral, rat) = 140 - 340 mg/kg Not available

SECTION 3 - PHYSICAL DATA
PHYSICAL STATE Liquid ODOUR THRESHOLD (ppm) Not available BOILING POINT (EC) 100 pH 13.3 APPEARANCE Clear yellow-orange fluid VAPOUR PRESSURE (mm Hg) Not available FREEZING POINT (EC) 0 DENSITY (g/mL) (20EC) 1.09 VAPOUR DENSITY (Air =1) Not available SOLUBILITY IN WATER (20EC) Miscible ODOUR Odourless EVAPORATION RATE Slow % VOLATILE (by weight) Approximately 86

COEFFICIENT OF WATER/OIL DISTRIBUTION >1

SECTION 4 - REACTIVITY DATA
CHEMICAL STABILITY Stable INCOMPATIBILITY WITH OTHER SUBSTANCES Avoid contact with strong acids and metals such as aluminum, tin, galvanized zinc, brass, and bronze. HAZARDOUS DECOMPOSITION PRODUCTS Contact with amphoteric metals such as aluminum may release flammable hydrogen gas.

IPAC
PRODUCT NAME
EFFECTIVE DATE

MATERIAL SAFETY DATA SHEET
IPAC LWT D-15
January 1, 2007 SECTION 5 - FIRE AND EXPLOSION HAZARDS PAGE 2 OF 3

FLAMMABILITY/COMBUSTIBILITY This product is not classified as flammable or combustible according to WHMIS. MEANS OF EXTINCTION As required for surrounding fire. SPECIAL FIRE-FIGHTING PROCEDURES Wear self-contained breathing apparatus and full protective clothing. HAZARDOUS COMBUSTION PRODUCTS Not available FLASH POINT (EC) & METHOD None AUTO IGNITION TEMP. (EC) Not available UPPER EXPLOSION LIMIT (% BY VOLUME) Not applicable TDG FLAMMABILITY CLASS Not applicable LOWER EXPLOSION LIMIT (% BY VOLUME) Not applicable SENSITIVITY TO MECHANICAL IMPACT Not sensitive

SENSITIVITY TO STATIC DISCHARGE Not sensitive

SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY Skin [X] Skin [ ] Contact Absorption Eye [X] Contact Inhalation [ ] Acute Inhalation [ Chronic ] Ingestion [ ]

EFFECTS OF ACUTE EXPOSURE TO PRODUCT Contact with eyes or skin will cause irritation and may cause burns. Inhalation of aerosol mists can cause irritation to nose, throat, and respiratory tract. EFFECTS OF CHRONIC EXPOSURE TO PRODUCT No chronic effects expected. LD50 Not available Carcinogen [ ] Reproductive [ Effects ] LC50 Not available Teratogen [ ] Mutagen [ ] EXPOSURE LIMITS Not available Irritant [X] Sensitizer [ ]

SECTION 7 - PREVENTIVE MEASURES
PROTECTIVE GLOVES Rubber gloves essential. EYE PROTECTION Chemical goggles or safety glasses essential. PROTECTIVE CLOTHING Alkali-resistant clothing recommended. RESPIRATORY PROTECTION If mists are generated, wear NIOSH-approved air-purifying respirator. PROTECTIVE FOOTWEAR Rubber footwear recommended. OTHER PROTECTIVE EQUIPMENT As required to prevent skin contact.

IPAC
PRODUCT NAME
EFFECTIVE DATE

MATERIAL SAFETY DATA SHEET
IPAC LWT D-15
January 1, 2007 SECTION 7 - PREVENTIVE MEASURES (Continued) PAGE 3 OF 3

ENGINEERING CONTROLS General ventilation usually adequate. LEAK AND SPILL PROCEDURES Do not flush to sewer. Dike or contain. Absorb onto inert material, package, and label for legal disposal. WASTE DISPOSAL Dispose of in accordance with Federal, Provincial, and Municipal regulations. Do not flush to sewer. HANDLING PROCEDURES AND EQUIPMENT Handle in accordance with good industrial hygiene practice. Wash thoroughly after handling. STORAGE REQUIREMENTS Keep containers closed and away from incompatible materials. Do not use aluminum, tin, galvanized zinc, brass, or bronze with this product. SPECIAL SHIPPING INFORMATION

SECTION 8 - FIRST AID MEASURES
SKIN Immediately and thoroughly flush affected area with water. Get medical attention if irritation persists. EYE Immediately and thoroughly flush eyes, holding the eyelids open, with lukewarm, gently flowing water for at least 20 minutes, then seek immediate medical attention. INHALATION Remove victim from hazard. Apply artificial respiration if indicated. Get immediate medical help. INGESTION Do not induce vomiting. Give conscious patients fluids. Call a physician and/or transport victim to an emergency medical facility. Note: If victim is unconscious never induce vomiting or give fluids. Place victim in a stable side position and keep warm. GENERAL ADVICE

SECTION 9 - PREPARATION OF M.S.D.S.
PREPARED BY Regulatory Affairs Department ADDITIONAL INFORMATION AND COMMENTS PHONE NUMBER (604) 261-3019 DATE January 1, 2007

Every effort is made to ensure that the data presented herein is current and factual; however, no warranty nor any other legal responsibility is to be construed from this document. Numerical values reported represent nominal and/or typical properties and do not constitute specifications. Any use of the information presented herein must be determined by the user to be in accordance with applicable Federal, Provincial and local laws and regulations.


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:7
posted:5/13/2009
language:English
pages:3