Post College Treatise Study by Gary E. Kilpatrick, P.E., NSPE
Treatise Study: Forensic Engineering
Introduction To Forensic Engineering – Course Taught by Dr. David T. Young, PE, UNC Charlotte.
Forensic Engineering – by Kenneth L. Carper.
Introduction To Forensic Engineering – by Randal Noon.
National Academy of Forensic Engineers – Journals.
Treatise Study: Traffic Accident Reconstuction
Traffic Accident Investigation Manual and Traffic Accident Reconstruction manual – by Northwestern
University Center For Public Safety.
Linear and Rotational Motion Analysis in Traccid Crash Reconstruction – Orion Keifer, Richard Conte &
Lamp Examination for Traffic Accident Investigators – by Tony L. Becker
Insurance Fraud and Motor Vehicle Collisions – by Robert A. DuBots
Occupant Seating Positions From Physical Evidence and Injury Patterns – by Joseph N. Cofone
Photography and Digital Imaging in Law Enforcement – by Kevin Mello
Photographing Vehicles for Litigation – by Jack Murry CLI, CFE
Seat Belt and Air Bag Systesm Manual – by R.W. Rivers
Modern Accident Investigation and Analysis – by Ted S. Ferry.
Rollover Crashes of Motor Vehicles and Heavy Trucks – by Joseph N. Cofone
The Investigators Guide To Tire Failures – by R. J. Grogan
Commercial Motor Vehicle Crash Investigation – by Bavid E. Brill.
Reconstruction of Truck Accidents From Tire Marks – by Frank Navin.
Trailer Underride Conspicuity, Human Factors and Rear Bumpers – by Joseph E. Badger.
Low Speed Automotive Accidents, Occupant Kinematics, Dynamics and Biomechanics – by Lawyers and
Motorcycle Accident Reconstruction and Litigation – by Kenneth S. Obenski& Paul F. Hill.
Motorcycle Accident Reconstruction – by Albert Baxter.
Inspection of Motorcycles After Impact – by Neal F. Robar.
Bicycle Accident Reconstruction For The Forensic Engineer – by James M. Green.
Forensic Engineering of Accidents – by John Fiske, Kenneth S. Obenski and Thomas R. Osborn.
Engineering Analysis of Vehicular Accidents – by Randal K. Noon.
Motor Vehicle Accident Reconstruction and Cause Analysis – by Rudolf Limpert.
Accident Reconstruction Technology and Animation – by Terry D. Day.
Accident Reconstruction Journals.
Collision Journals, The International Compendum For Crash Research.
The Four-Way-Stop Intersection Illusion – by Peter S. Parsonson, Phd, PE.
Treatise Study: Federal Motor Carriers Safety
Federal Motor Carrier Safety Regulations – CFR Title 49.
Federal Motor Carrier Safety Regulations Handbook Parts 40, 325, 350-399.
North Carolina Commerical Drivers Manual – by NCDOT.
Treatise Study: Federal Highways Regulations
Manual of Uniform Traffic Control Devices – by AASHTO.
Highways – by AASHTO CFR 23.
Highways and Streets – by AASHTO.
Treatise Study: Human Factors
Forensic Aspects of Driver Perception and Response – by Paul L. Olson and Eugene Farber.
Forensic Vision With Appications To Highway Safety – by Marc Green & Merril J. Allen.
Human Factors in Traffic Safety – by Robert Dewar and Paul Olson.
Treatise Study: Motorcycle Riding
Experienced Rider Course – by Motorcycle Safety Foundation.
Big Bear Choppers: How To Build a Custom Motorcycle.
Treatise Study: All Terrain Vehicles
ATV Rider Course Handbook – ATV Safety Institute.
ANSI/SVIA 1-1990 Four Wheel AllTerrain Vehicles.
ANSI/SVIA 1-2001 Four Wheel All Terrain Vehicles – Equipment, Configuration and Performance
ANSI/SVIA 1-2007 Four Wheel All Terrain Vehicles – Equipment, Configuration and Performance
Treatise Study: Motor Vehicle Maintenance
Motor Heavy Truck Repair Manual.
How To Hot Rod Small Block Chevys – HP Books.
Clutch & Flywheel Handbook – HP Books.
Pertersen’s Basic Clutches & Transmissions.
Holley Carburators & Manifolds – HP Books.
Rochester Carburators – HP Books.
Petersen’s Basic Ignition and Electrical Systems – Petersen Publishing Company.
Haynes Automotive Heating & Air Conditioning Manual.
Treatise Study: Occupational Safety and Health Standards
OSHA 29 CFR 1910 General Industry Regulations.
OSHA 29 CFR 1926 Construction Industry Regulations.
OSHA Construction Industry Requirements.
OSHA 29 CFR 1928 Agriculture Regulations.
OSHA Health Hazard Communication Standard.
OSHA Hazardous Chemicals Right To Know.
OSHA Forklift Training.
OSHA Guide To Machine Safeguarding.
OSHA Guide To Emergency Action Planning.
OSHA Safety In Confined Spaces.
OSHA Crane Safety.
OSHA Safe Scaffolding.
OSHA Guide To Personal Protective Equipment.
OSHA Fall Prevention in Industry.
OSHA Guide To The Control of Hazardous Energy (Lockout/Tagout).
OSHA Farm Safety.
Industrial Accident Prevention – by H.W. Heinrick, Dan Peterson and Nestor Roos.
Safety Auditing A Management Tool – by Donald W. Kase and Kay J. Wiese.
Treatise Study: Machine Design
Industrial Hydraulics Manual – by Vickers.
Cincinnati Milacron Gringing Wheel Application Guide.
IPT’s Pipe Trades Handbook – by Robert A. Lee.
The Pipe Fitters Blue Book – by W.V. Graves.
Machinery’s Handbook - by Industrial Press Inc.
Mark’s Handbook For Mechanical Engineers.
Mechanical Engineering Reference Manual for the PE Exam – by Michael R. Lindeburg, PE.
AISC Manual of Steel Construcion.
Flow of Fluids Through Valves, Fittings and Pipe – Crane Valves.
Dwyer Engineering and Applications Handbook – by Dwyer Instruments, Inc.
Mechanisms & Mechanical Device Sourcebook – by Nicholas P. Chironis.
Roark’s Formulas For Stress and Strain – by Warren C. Young.
Standard Handbook of Machine Design – by Joseph E. Shigley & Charles R. Mischke.
Pump Handbook – by Igor J. Karassik, Joseph P. Messina, Paul Cooper and Charles C. Heald.
Principles of Turbo Machinery – by D.C. Shepard.
Thermodynamic Properties of Water Including Vapor, Liquid and Solid Phases – by Joseph G. Keenan,
Philip G. Hill & Joan G. Moore.
Cameron Hydraulic Data – by Ingersoll-Dresser Pumps.
Know and Understand Centrifigal Pumps – Larry Bachus & Angel Custodio.
Measuring and Improving Boiler Efficiency.
Modern Geometric Dimensioning – by Lowell W. Foster.
Product Liability and Inovation – by National Academy Press.
Treatise Study: Manufacturing and Process Engineering
Chesapeake Consulting Constraint Management Applications.
Mesa Consulting Group Incorporated - Six Sigma.
Six Sigma – by American Society of Quality (ASQ).
ISO 9001: 2000 Internal Quality Auditing – Course Offered by North Carolina State University.
ISO 9001:2000 Quality System Requirements Outline.
Introduction To Statisical Quality Control – by Douglas C. Montgomery.
Design and Analysis of Experiments – by Douglas C. Montgomery.
Toyota Production System – by Yasuhiro Monden.
Failure Mode and Effects Analysis (FEMA) – by Robin E. McDermott, Raymond J. Mikulak & Michael R.
Failure Mode and Effects Analysis (FEMA) – by Automotive Industry Action Group (AIAG).
Advanced Product Quality Planning (APQP) – by Automotive Industry Action Group (AIAG).
Measurement System Analysis (MSA) – by Automotive Industry Action Group (AIAG).
Energy Savings in Preventtive Maintenance.
Fundamentals of Machining and Machine Tools – by Geoffrey Boothroyd & Winston A. Knight.
Fundamentals of Presswork – by Society of Manufacturing Engineers and David Smith.
Machine Shop Operations and Setups – by Lascoe, Nelson & Porter.
Programmable Logic Controllers Priniples and Applications – by Jogn W. Webb & Ronald A. Reis.
Computer Numerical Control For Machining – by Mike Lynch.
Machining Data Handbook – by Institute of Advanced Manufacturing Sciences.
Productive Metal Cutting – by Sandvik.
Tool Wear Optimizing Tool Performance Through Insert Wear Analysis – by Sandvik.
Tool Design – by Cyril Donaldson, George H. LeCain & V.C. Goold.
Modular Fixturing Handbook –Carr Lane Manufacturing Co.
Jig and Fixture Design – by Edward G. Hoffman.
Human factors in Industrial Design – by John H. Burgess.
Designing For Humans: The Human Factor in Engineering – by John H. Burgess.
Treatise Study: USDA and FDA
9 CFR 381 Poultry Products Inspection Regulations – by FDA.
9 CFR 416 Poultry Sanitary Regulations – by FDA.
USDA Guidelines For The Evaluation and Certification of The Sanitary Design and Fabrication of Meat
and Poultry Processing Equipment.
NSF/ANSI 3-A 14159-1 Hygiene Requirements For The Design of Meat and Poultry Processing
Equipment – by USDA.
The FDA Worldwide Quality System Requirements Guidebook for Medical Devices – by ASQ.
Quality Systems and GMP Regulations for Medical Device Manufactures – by Steven S. Kuwahara.
Treatise Study: Fire Investigation
Practical Fire and Arson Investigation – by John J. O’Connor.
Automotive Fire Analysis An Engineering Approach – by Gregory J. Barnett.
ATF Arson Investigation – by The Department of The Treasury US Government.
Treatise Study: Metalurgical Examination and Materials Engineering
An Atlas of Metal Damage – by Lothar Engel & Hermann Klingele
ASM Handbook Volume 12 Fractography
SAE Handbook Suppliment HS 30 Standards Recommended Practices Information Reports.
Metallurgical Theory and Practice – by Dell K. Allen.