1106 - PDF

Document Sample
1106 - PDF Powered By Docstoc
					EC-214
3606 - 6 Avenue North; Lethbridge, AB; T1H 5C4 Toll Free: 1-800-248-1195; Phone: (403) 328-9730 Fax: (403) 327-4375; E-Mail: ewt@enerconwt.com Visit our website at: www.enercon.ca

ENERCON WATER TREATMENT LTD.

FLASH POINT & METHOD: None. (TCC) FLAMMABILITY LIMITS: (v/v in air) Upper: Not Applicable. Lower: Not Applicable. AUTO IGNITION TEMPERATURE: (° C) No data Available. HAZARDOUS COMBUSTION PRODUCTS: Oxides of sulphur, and sodium sulfide may be liberated on thermal decomposition.

MATERIAL SAFETY DATA SHEET Emergency Telephone No. (613) 996-6666 (Canutec) W.H.M.I.S. CLASSIFICATION: (D2b)

EXPLOSION DATA: Sensitivity to impact: None. Sensitivity to static discharge: None.

SECTION (V) REACTIVITY DATA: SECTION (I) PRODUCT IDENTIFICATION AND USE: CHEMICAL STABILITY: Normally Stable PRODUCT NAME: EC-214 PRODUCT USE: BOILER WATER TREATMENT. If no: under what conditions? INCOMPATIBILITY WITH OTHER SUBSTANCES: Yes If yes, which ones: Avoid contact with Acids or strong alkalis. SECTION (II) HAZARDOUS INGREDIENTS: Hazardous Ing. % Concentrate TLV PPM C.A.S. U.N. No. LD 50 Oral, Rabbit Sodium Sulfite 10 – 30 Not Available 7757-83-7 2825 mg/kg REACTIVITY DATA: Stable If unstable: under which conditions? HAZARDOUS DECOMPOSITION PRODUCTS: Sodium Sulphide or Sulphur Dioxide at high temperatures. Acids may liberate sulphur dioxide.

SECTION (VI) TOXICOLOGICAL PROPERTIES: SECTION (III) PHYSICAL DATA: PHYSICAL STATE: Liquid. APPEARANCE: Colorless. ODOUR: Almost Odorless. ODOUR THRESHOLD: (ppm) No Data Available. VAPOUR PRESSURE: (mm Hg) No Data Available. VAPOUR DENSITY: (Air=1) No Data Available. EVAPORATION RATE: (Water=1) < 1 BOILING POINT: 100° Approx. C FREEZING POINT: -25° C pH: 9.64 SPECIFIC GRAVITY: 1.092 WATER/OIL DISTRIBUTION COEFFICIENT: No Data Available. ROUTE OF ENTRY: Skin contact: ........................................................ Yes Skin absorption: .....................................................N/A Eye contact: .......................................................... Yes Inhalation: ............................................................. Yes Ingestion: .............................................................. Yes EFFECTS OF ACUTE EXPOSURE TO PRODUCT: Skin Contact: Prolonged contact may cause irritation. Eye Contact: May cause irritation. Inhalation: Mist may be irritating to the respiratory tract. Ingestion: May be irritating to the digestive system. EFFECTS OF CHRONIC EXPOSURE TO PRODUCT: No data available. EXPOSURE LIMITS: No data available. SECTION (IV) FIRE & EXPLOSION DATA: FLAMMABILITY: Non-Flammable If yes: under what conditions? MEANS OF EXTINCTION: N/A IRRITANCY OF PRODUCT: May be an irritant to any part of the body. SENSITIZATION TO PRODUCT: No data available. SYNERGISTIC PRODUCTS: No data available. TERATOGENICITY: No data available. REPRODUCTIVE TOXICITY: No data available. MUTAGENICITY: Sodium Sulfite has caused

Page 1

EC-214
mutagenicity in animal studies. CARCINOGENICITY: The ingredients of this product are not considered to be carcinogens by the National Toxicity Program, the International Agency for Research on Cancer or the Occupational Safety and Health Administration. SPECIAL SHIPPING INFORMATION: None. SECTION (VII) PREVENTIVE MEASURES: PERSONAL PROTECTIVE EQUIPMENT: Gloves: Preferred types are: Neoprene, Nitrile Rubber or Polyvinyl Chloride. Respiratory: Under normal conditions no respiratory protection is required. If concentration level exceeds 350 ppm use approved organic type respirator. Eye: Chemical splash goggles or safety glasses with side shields should be worn in compliance with OSHA regulations. Footwear: No special requirements. Clothing: Long sleeves should be worn. Other: Do not eat, drink or smoke in work area. Thoroughly wash hands after handling. ENGINEERING: Ventilation: General ventilation normally adequate. Use sufficient mechanical and/or local exhaust ventilation to maintain exposure below TLV(s). LEAK AND SPILL PROCEDURE: Small Spills: Flush to sewer with large volumes of water. Large Spills: Dyke area and contain spill. Pump to container for recovery or disposal. Neutralize remaining material and flush to sewer with large volumes of water. WASTE DISPOSAL: Consult federal, municipal and local disposal authorities for approved procedures. STOREAGE REQUIREMENTS: Store in tightly sealed containers in cool, dry, well-ventilated area. INFORMATION CONTAINED HEREIN IS COMPILED FROM SOURCES BELIEVED TO BE RELIABLE. THE MANNER AND CONDITIONS OF USE AND HANDLING MAY INVOLVE OTHER AND ADDITIONAL CONSIDERATIONS. WE ACCEPT NO RESPONSIBILITY FOR ACCURACY, SUFFICIENCY, AND RELIABILITY OR FOR ANY LOSS OR INJURY RESULTING FROM THE USE OF THIS INFORMATION. SECTION (X) PREPARATION DATA: PREPARED BY: Technical Services Department PHONE: (403) 328-9730 PREPARATION DATE: March 1, 2007 EXPIRY DATE: March 1, 2010 transport to a medical facility. Do not induce vomiting.

SECTION (IX) - TDG SHIPPING INFORMATION

SECTION (VIII) FIRST AID MEASURES; Skin Contact: Wash well with plenty of soap and water. If irritation develops contact a physician. Eye Contact: Immediately flush eyes with plenty of running water for 15 minutes lifting eyelids occasionally. Get medical attention at once. Inhalation: Remove patient to fresh air. Consult a physician. Ingestion: If awake, give plenty of water to drink and

Page 2


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:24
posted:5/10/2009
language:English
pages:2