Boilers and Waterheating

Document Sample
Boilers and Waterheating Powered By Docstoc
					Boilers and Water Heating
Rebate Catalog
Saving energy for a brighter future.
                       Pacific Gas and Electric Company
                       Energy Efficiency Rebates for Your Business
What’s Inside
Boilers and Water Heating
Rebate Catalog
Energy Efficiency Rebates for Your Business




Process Heating


Hot Water Heating



Space Heating
   Process Boiler.......................................................... 1




Steam Traps
   Direct Contact Water Heater.................................... 1




Pool Heating
   Large Domestic Hot Water Boiler ............................ 1
   Electric Storage Water Heater ................................ 2




Insulation
   Ozone Laundry System ............................................ 2


   Space Heating Boiler .............................................. 3




Definitions
   Steam Traps ............................................................ 3


   Commercial Pool and Spa Heater............................ 4


   Pipe Insulation ........................................................ 4
   Tank Insulation ........................................................ 4



   Definitions .............................................................. 5
Process Heating
Process Boiler
Carefully read the specifications below to determine that you
are installing a qualifying product(s). Customer must have
natural gas distributed by Pacific Gas and Electric Company
(PG&E) to the installation address unless otherwise noted. All
installations must be new and replace a previously installed




                                                                 Application Process:
product unless otherwise noted.




Requirements:




Hot Water Heating
                                                                 • Must include the manufacturer name and equipment
                                                                   model.




Direct Contact Water Heater
Exclusions:
• Only available to industrial end-use customers who             • A flue gas analysis measured under full load conditions is
  manufacture a saleable product (NAICS codes 31-33).              required after installation is complete to document
• Must meet a minimum combustion efficiency of 82% once            combustion efficiency.
  installed (see under Application Process).


  Boilers primarily used for domestic hot water, space




Requirements:
  conditioning, pool or spa use do not qualify.
                                                                  Rebate               Description                                Rebate/Unit
                                                                  Code                                                            Measure

                                                                   H15                 Steam Process Boiler                       $2.00/MBtuh




Exclusions:
• Only direct contact water heaters for process end-uses
                                                                   H11                 Water Process Boiler                       $2.00/MBtuh




  (NAICS codes 31-33).




Large Domestic Hot Water Boiler
• Must meet efficiency requirements based on input ratings
                                                                 Table 1




  shown in Table 1.
                                                                   Input Rating                                     Required Efficiency

                                                                   ≤ 300 MBtuh                                      AFUE ≥ 88%




  Water heaters primarily used for domestic hot water,
                                                                   > 300 MBtuh                                      Thermal Efficiency > 90%




                                                                 Exclusions:
  space conditioning, pool or spa use does not qualify.




Requirements:
                                                                 All required efficiencies, as prescribed above, exceed Title 20 and 24 standards.



                                                                  Rebate                                                          Rebate/Unit




                                                                 Application Process:
                                                                                       Description
                                                                  Code                                                            Measure

                                                                   H16                 Direct Contact Water Heater                $2.00/MBtuh




                                                                 • Cannot be used for space conditioning.
                                                                 • Cannot be used for industrial (process) end-use.
• Must be a commercial end-use customer.
• Only boilers with an input rating greater than 75,000 Btuh
  qualify.                                                         Must include a manufacturer’s specification sheet
• Must meet a minimum thermal efficiency of 84% or higher.         documenting input rating and efficiency.


                                                                  Rebate               Description                                Rebate/Unit
                                                                  Code                                                            Measure

                                                                   H105                Large Domestic Hot Water Boiler            $1.50/MBtuh




Apply or check the status of your rebate online through eRebates at www.pge.com/mybusiness/erebates.
Visit www.pge.com/businessrebates for more information or call the Business Customer Service Center at 1-800-468-4743.                               1
Hot Water Heating, continued
Electric Storage Water Heater
Requirements:
                                                                 Exclusions:
                                                                 Go to www.ahridirectory.org for a list of qualifying
                                                                 residential water heaters and the corresponding EF.




Ozone Laundry System
• Customer must have electricity distributed by PG&E to the
  installation address.                                            No instantaneous or tankless water heaters.
• Must be new and replace a previously installed product.
• Must have an Energy Factor (EF) of 0.93 or greater.
• Capacity must be 40 gallons or more.
• Only residential-style electric storage water heaters
  qualify for this rebate.


                                                                 • The ozone laundry system(s) must be a new purchased
                                                                  Rebate                                          Rebate/Unit
                                                                                Description
                                                                  Code                                            Measure




                                                                   product and added-on to a new or existing commercial
The ozone laundry system(s) is a piece of equipment that is        washing machine(s).
                                                                  H154          Electric Storage Water Heater —




added-on to new or existing commercial washing                   • The ozone laundry system(s) must transfer ozone into the
                                                                                EF ≥ 0.93                         $30.00/unit




                                                                 Application Process:
machine(s). The system generates ozone (O3), a naturally           water through:
occurring molecule, which helps clean fabrics by chemically
                                                                   – Venturi Injection
reacting with soils in cold water. Adding an ozone laundry
system(s) will reduce the amount of chemicals, detergents,           or
and hot water needed to wash linens. Using ozone also              – Bubble Diffusion




Requirements:
reduces the total amount of water consumed, saving even
more in energy.
                                                                 • For hotel customers: The total number of guest rooms
Purchase and install ozone laundry system(s) on or after           must be included on the invoice.
November 1, 2009 to be eligible for this rebate.                 • Must include a manufacturer’s specification sheet
                                                                   documenting manufacturer name, equipment model, and
                                                                   ozone laundry system’s serial number(s).
• Customer must have a natural gas-fired boiler or natural
                                                                 • Must include total washer capacity in pounds for operating
  gas water heater that supplies hot water to the on-premise
                                                                   washer units with ozone laundry system(s) connected.
  laundry equipment.
• This incentive only applies to the following facilities with
  on-premise laundry operations:
  – Hotels/motels with fewer than 250 guest rooms.
    or
  – Fitness and recreational sports centers.
                                                                  Rebate                                Rebate/Unit
                                                                                Description
                                                                  Code                                  Measure

                                                                  B85           Ozone Laundry System    $39.00/lb Washing Machine
                                                                                                        Capacity (Connected to
                                                                                                        Ozone Laundry System)




Apply or check the status of your rebate online through eRebates at www.pge.com/mybusiness/erebates.
Visit www.pge.com/businessrebates for more information or call the Business Customer Service Center at 1-800-468-4743.              2
Space Heating
Space Heating Boiler




Steam Traps
Requirements:
• Must be used for space heating to induce human comfort




Application Process:
  (as defined by the California Energy Commission (CEC)
  Titles 20 and 24 standards).
                                                               Table 2




• Must meet efficiency requirements based on input ratings
                                                                Type                 Input Rating                  Required Efficiency




  and types shown in Table 2.




Steam Traps
                                                                 Steam               < 300 MBtuh                   AFUE ≥ 77%
                                                                 Small Water         < 300 MBtuh                   AFUE ≥ 82%




 Must include a manufacturer’s specification sheet
                                                                 Large               ≥ 300 MBtuh but




 documenting type, input rating and efficiency.
                                                                                     ≤ 5,000 MBtuh                 Thermal Efficiency ≥ 84%




                                                               Exclusions:
                                                               All required efficiencies, as prescribed above, exceed Title 20 and 24 standards.




Requirements:
                                                                Rebate               Description                                Rebate/Unit
                                                                Code                                                            Measure




                                                               Application Process:
                                                                 H111                Water Space Heating Boiler                 $1.00/MBtuh
                                                                 H112                Large Space Heating Boiler                 $1.00/MBtuh
                                                                 H113                Steam Space Heating Boiler                 $1.00/MBtuh




                                                                 New construction is not eligible.

• Industrial steam traps are for end-use customers who
  manufacture a saleable product.                                Must include a manufacturer’s specification sheet for the
• Commercial steam traps are for end-use customers in            steam trap that is replacing the existing trap.
  commercial and institutional facilities (such as dry
  cleaners, greenhouses or hospitals).
• New industrial steam traps must replace, one-for-one,
  existing failed steam traps.
• New commercial steam traps must replace, one-for-one,
  existing failed or older steam traps.
                                                                Rebate               Description                                Rebate/Unit
                                                                Code                                                            Measure

                                                                 H221                Commercial Steam Traps —
                                                                                     any pressure                               $50.00/unit
                                                                 H201                Industrial Low Pressure
                                                                                     Steam Traps (≤ 15 PSIG)                    $100.00/unit
                                                                 H202                Industrial High Pressure
                                                                                     Steam Traps (> 15 PSIG)                    $200.00/unit




Apply or check the status of your rebate online through eRebates at www.pge.com/mybusiness/erebates.
Visit www.pge.com/businessrebates for more information or call the Business Customer Service Center at 1-800-468-4743.                             3
Pool Heating




Insulation
Commercial Pool and Spa Heater                                   Exclusions:
Requirements:
                                                                 Application Process:
                                                                  No Single Family accounts.

• Must replace existing pool heater.
• Must be certified to meet the following requirements:           Please apply through Energy Efficiency Rebates for




Pipe Insulation
  1. Must be equal to or greater than 84% thermal efficiency      Multifamily Properties if purchasing this product for an
                                                                  existing Multifamily account.
     and
  2. Must have an “on/off” switch and have no pilot light.
Go to www.energy.ca.gov/appliances/database/ for a list of
qualifying products with thermal efficiency of 84% or greater.




Requirements:
                                                                  Rebate       Description                            Rebate/Unit
                                                                  Code                                                Measure




                                                                 • Must include the manufacturer’s name, insulation material
                                                                  H103         Commercial Pool and Spa Heater         $2.00/MBtuh




                                                                   type and material k-value rating.

• One or two inches of fiberglass, foam, or calcium silicate
  insulation must be added to existing, nonresidential bare




Tank Insulation
Application Process:
  pipe systems.
• The pipes must transfer fluid directly from gas-fired
  equipment.
• Minimum qualifying pipe diameter is one inch.
                                                                  Rebate       Description                         Rebate/Unit
                                                                  Code                                             Measure




• Insulation thickness and liquid or steam temperature will




Requirements:
                                                                  H106         1” Pipe Insulation; Hot Water




  determine the rebate amount.
                                                                               (120 – 200° F)                      $2.00/linear foot
                                                                  H107         2” Pipe Insulation; Hot Water
                                                                               (120 – 200° F)                      $3.00/linear foot




                                                                 • Must include manufacturer’s name, insulation material
                                                                  H108         1” Pipe Insulation; Low Pressure




                                                                   type and the material k-value rating.
                                                                               (< 15 PSIG) Steam (200 – 250° F)    $3.00/linear foot
                                                                  H109         2” Pipe Insulation; Low Pressure




• One or two inches of fiberglass or foam insulation must be
                                                                               (< 15 PSIG) Steam (200 – 250° F)    $4.00/linear foot




  added to existing bare liquid, solution storage or transfer




Application Process:
  tanks.
• The tanks must be coupled to gas-fired commercial or
  industrial equipment that transfers heat to the contained
  liquid or solution.
                                                                  Rebate       Description                        Rebate/Unit
                                                                  Code                                            Measure




• The insulation thickness and tank solution temperature
                                                                  H115         1” Tank Insulation, Low Temp




  will determine the rebate amount.
                                                                               Solution (120 – 170° F)            $2.00/square foot
                                                                  H114         1” Tank Insulation, High Temp
                                                                               Solution (170 – 200° F)            $3.00/square foot
                                                                  H13          2” Tank Insulation, Low Temp




Apply or check the status of your rebate online through eRebates at www.pge.com/mybusiness/erebates.
                                                                               Solution (120 – 170° F)            $3.00/square foot




Visit www.pge.com/businessrebates for more information or call the Business Customer Service Center at 1-800-468-4743.
                                                                  H18          2” Tank Insulation, High Temp
                                                                               Solution (170 – 200° F)            $4.00/square foot




                                                                                                                                       4
              Definitions
              AFUE: Annual Fuel Utilization Efficiency.
              Btu: British Thermal Unit, the amount of heat required to raise the temperature of
              one pound of water by one degree Fahrenheit.
                Btuh: British Thermal Units per Hour.
                MBtu: 1000 British Thermal Units.
                MBtuh: 1000 British Thermal Units per Hour.
              Bubble Diffusion: A method of inserting ozone into water by continuously bubbling
              ozone directly into the sump of the washer throughout the wash cycle.
              Direct Contact Water Heater Systems: Heat from a flame comes into direct contact
              with small droplets of cold water which run through a stainless steel heat exchange
              media. Droplets composed from the process come into direct contact with rising heat
              from the flame and the water is heated directly.
              End-Use Customer: A customer who acquires energy for their own consumption.
              Energy Factor (EF): Water Heater: the measure of a water heater’s efficiency. EF is
              based on recovery efficiency, standby losses and cycling losses. The higher the EF,
              the more efficient the water heater is.
              K-value: refers to thermal conductivity and has a unit of Btu-inch per hour per square
              foot per °F.
              Manufacture: To mechanically or chemically transform materials or substances into a
              new product which is neither a structure nor any other fixed improvement.
              NAICS: North American Industry Classification System identifies new, emerging and
              advanced technology industries. NAICS defines industries according to a consistent
              principle: businesses that use similar production process are grouped together.
              Please visit www.census.gov/eos/www/naics/ for a list of NAICS Codes and Titles.
              PSIG: Pounds of steam pressure per square inch (gauge). The steam system should
              have a steam pressure gauge attached which reads the pressure of the steam in the
              pipes. The pressure gauge will read out in pounds of pressure per square inch (psig).
              Total Washer Capacity: Refers to rated capacity of installed and operating washing
              machine units that will be connected to the ozone laundry system.
              Venturi Injection: A method of inserting ozone into water using very high pressure
              directly into the cold water supply line leading to the washer.




Apply or check the status of your rebate online through eRebates at www.pge.com/mybusiness/erebates.
Visit www.pge.com/businessrebates for more information or call the Business Customer Service Center at 1-800-468-4743.   5
More ways for your business to save money.
Looking for more information on Pacific Gas and Electric Company’s (PG&E) rebates
and incentives for your business? Visit www.pge.com/businessrebates to access the
latest rebate information, catalogs, and guidance for your next energy efficiency upgrade.
If you’re ready to apply for a rebate, you can download an application at
www.pge.com/businessrebates or apply online through eRebates at
www.pge.com/mybusiness/erebates . With PG&E’s eRebates, you can also check the
status of your rebate application.
In addition to rebates, you can find a wide range of tools and resources at
www.pge.com/mybusiness/energysavingsrebates that can help your business save
energy, money and help the environment.
• Sign up for PG&E's Automated Benchmarking Service at www.pge.com/benchmarking.
  Use ENERGY STAR® Portfolio Manager to track and compare your facility's energy
  performance over time.
• Use PG&E’s audit tools to identify options for saving energy and money at your facility,
  and get started on developing a comprehensive energy management plan.
• Find a suite of customized incentives for retrofitting outdated, inefficient equipment,
  as well as incentives to optimize existing equipment through retrocommissioning.
• Explore PG&E's demand response programs that offer incentives for managing your
  energy use during times of peak demand.
• Check out PG&E’s incentives for solar, wind and fuel cell self-generation equipment,
  if you’re considering generating your own electricity.
Learn more about these programs, tools and offers at www.pge.com/businessrebates
or contact the Business Customer Service Center at 1-800-468-4743 with questions.
Ready to get started with your next project, and need the help of a contractor? Find local
vendors who participate in PG&E's Energy Efficiency Rebates for Your Business Program
www.pge.com/tradeprodirectory.




"PG&E" refers to Pacific Gas and Electric Company, a subsidiary of PG&E Corporation. ©2010 Pacific Gas and Electric Company.
All rights reserved. These offerings are funded by California utility customers and administered by PG&E under the auspices of
the California Public Utilities Commission.
PG&E prints its materials with soy based inks     on recycled paper.                             January 2010 CMM-1010-0190
        ®           Pacific Gas and Electric Company
                    Energy Efficiency Rebates for Your Business



                    2010 - 2012
                    Business Rebate Application

                          About this Application
                          Pacific Gas and Electric Company (PG&E) offers rebates on hundreds of energy efficient products and
                          improvements for your business. When you purchase and install these products, you can save energy
                          and money while reducing your impact on the environment.
                          This application will guide you through the steps you need to take to apply for a rebate. Please review the
                          Business Rebate Catalogs and Terms and Conditions before purchase to determine eligibility requirements.
                          Thank you for applying for a rebate. If you need assistance, please contact PG&E’s Business Customer
                          Service Center at 1-800-468-4743.


                          How to Apply
Mail completed            1. Read the Terms and Conditions in Section 8 to determine if you are eligible for a rebate.
forms and required        2. Read the Product Specifications for the item(s) for which you are applying in the corresponding
documentation with           Business Rebate Catalogs (also available online at www.pge.com/businessrebates). The catalogs
Proof of Purchase to:        detail the requirements for qualifying products, including eligibility dates, if applicable.
PG&E Business Rebates     3. Purchase and Install qualifying product(s) between January 1, 2010 and December 31, 2012.
Integrated Processing        These dates may change based on availability of program funds. For products purchased in 2009
Center (IPC)                 with the same energy efficiency specification(s) at the same rebate level(s) continuing from 2009,
                             applications with required documentation are eligible for a rebate per program terms and conditions.
P.O. Box 7265                Qualifying products must be installed before submitting your application.
San Francisco, CA
                             Please submit this rebate application within 90 days of purchase. Applications will be handled on
94120-7265                   a first-come, first-served basis.
                          4. Complete the Application Form. Refer to the Business Rebate Catalog, your Proof of Purchase
Need Help?                   documentation, and a copy of your PG&E bill to complete the following:
Business Customer
                             A. Customer Information – Section 1. Print your name/company name as it appears on your
Service Center
                                PG&E bill, installation address, and primary telephone number. Include contact name and
1-800-468-4743 or
                                mailing address if different from account holder name and installation address.
www.pge.com/
businessrebates              B. Account Information – Section 2. Complete all required fields: “Account Information”,
                                “Property Occupied By”, “Est. Year Built”, and “Est. Square Footage”.
                             C. Business Payee Tax Information - Section 3. Please provide “Tax Status” and “Tax ID Number”.
Apply online:
www.pge.com/                 D. Payment Release Authorization (if applicable) - Section 4. If your rebate check is to be paid to
mybusiness/erebates             a contractor, landlord or any third party other than the PG&E Account Holder on your bill this
                                section MUST be completed and signed in blue or black ink.
                             E. Rebate Product Information - Section 5. Locate the product(s) for which you are applying for
                                a rebate in the Business Rebate Catalogs. Complete all required information.
                             F. Business Property Type Description – Section 6. Select the property type that best represents
                                your business.
                             G. Customer Signature - Section 7. Please sign and date the application in blue or black ink.
                          5. Checklist - Review checklist to make sure you have provided all required information.
                          6. Make and keep a copy of the completed Application Form and all required documentation,
                             for your records. Submitted applications will become the property of PG&E.
                          7. Mail the original completed Application Form and other required documentation to PG&E
                             Business Rebates, Integrated Processing Center (IPC), P.O. Box 7265, San Francisco, CA 94120-7265.
                             Please do not staple receipts or attachments to rebate application.
                        Proof of Purchase Requirement
                        1. Retail Product Receipt/Invoice
                           Proof of Purchase and required documentation should be legible and submitted with your Application
                           Form within 90 days of purchase date. It must include all of the following information:
                          A. Name, full address of Account Holder.
                          B. Name, address and phone number of the trade professional, retailer and/or contractor and the address
                             where the product was installed.
                          C. Itemized listing of each product including: the product description, quantity, manufacturer, model number,
                              or other identifying information (e.g. SKU #). This must match the requested product rebate listed
                              on your Application Form.
                          D. Purchase price per product.
                          E. Date and paid documentation that state terms of payment such as, “Paid in Full,” or payment terms,
                             such as “Charge” or “Net 30.”
                          F. Product installation date.
                          Read the product specifications included in the Business Rebate Catalogs to make sure all
                          requirements are met.


Mail completed          Checklist
forms and required
documentation with          Before submitting your application, make sure you have done the following:
Proof of Purchase to:
PG&E Business Rebates           Completed all required sections of Business Rebate Application.
Integrated Processing           Signed the Application in blue or black ink.
Center (IPC)                    Verified that all required Proof of Purchase information is included.
P.O. Box 7265
                                Made copies of all documentation for your records.
San Francisco, CA
94120-7265
                            Date Submitted* ______________


                            *A rebate check for qualifying product(s) is generally mailed 6 to 8 weeks after PG&E receives
                            and approves all required information. Please see Terms and Conditions (Section 8).




                                                                               Apply online: www.pge.com/mybusiness/erebates
                                                              2
        ®           Pacific Gas and Electric Company
                    Energy Efficiency Rebates for Your Business                      Apply online: www.pge.com/mybusiness/erebates


                    2010 - 2012 Business Rebate Application
Please complete all sections. Incomplete applications will be delayed. If your rebates are for multiple Service ID#s, please list those
in Section 5.
Section 1 - Customer Information


Account Holder/Company Name: (as it appears on PG&E bill)                    Contact Name: (if different from Account Holder)


Installation Address                                          Suite #        City                                      State             Zip Code


Mailing Address (if different than Installation Address)      Suite #        City                                      State             Zip Code
(    )
Primary Phone #                                                              Email Address
                                                                                Yes, I would like to be notified by email of other PG&E programs.
Section 2 - Account Information
Please refer to your PG&E bill for your Account Number and Service ID#(s)
                                                      -                             Property Occupied By:         Owner         Tenant
Account Number

                                                                                    Est. Year Built ________ Est. Square Footage ________
Gas Account Service ID#        Check if no PG&E gas service



Electric Account Service ID#      Check if no PG&E electric service


Section 3 - Business Payee Tax Information - Required information for all applications
Tax Status: To be completed by the person or entity receiving payment (“Payee”)
   Corporation            Partnership            Individual/Sole Proprietor              Exempt (Tax exempt, non-profit)
Tax ID Number: Please provide EITHER your EIN/Federal Tax ID or Social Security Number in the appropriate spaces below:

                    -                                          or                        -                -
       EIN or Federal Tax ID                                          Social Security Number
Tax Liability: You are urged to consult your tax advisor concerning the taxability of rebates. Pacific Gas and Electric Company (PG&E) is
not responsible for any taxes that may be imposed on your business as a result of receipt of this rebate. Rebates are taxable if greater
than $600 within one calendar year for business customers, and will be reported as income to you on IRS Form 1099 unless you have
checked “Corporation” or “Exempt” tax status above.

Section 4 - Payment Release Authorization (If Applicable)
SKIP THIS SECTION IF REBATE CHECK WILL BE MADE PAYABLE TO ACCOUNT HOLDER
COMPLETE THIS SECTION ONLY IF PAYMENT IS GOING TO SOMEONE OTHER THAN THE PG&E ACCOUNT HOLDER IN SECTION 1. I AM AUTHORIZING THIS
PAYMENT OF MY REBATE TO THE THIRD PARTY (“PAYEE”) NAMED BELOW AND I UNDERSTAND THAT I WILL NOT BE RECEIVING THE REBATE CHECK FROM
PG&E. IF “PAYEE” IS A BUSINESS, REQUESTED TAX INFORMATION MUST BE PROVIDED. I ALSO UNDERSTAND THAT MY RELEASE OF THE PAYMENT TO THE
THIRD PARTY DOES NOT EXEMPT ME FROM THE REBATE REQUIREMENTS OUTLINED IN THIS APPLICATION.
Authorized by:


PG&E Account Holder (Print)                                           Signature                                                   Date
Check should be made payable to:


Payee: Individual/Business Name                                                          Phone #


Payee Mailing Address                                City                                                     State             Zip Code



                                                                         3                                    Continued on next page.
 Section 5 - Rebate Product Information
 Please refer to the following:
 • Your PG&E bill for your Service ID#(s). If you are applying for rebates for more than one Service ID#, either gas or electric, you must provide the Service ID#
   that is associated with the specific product*.
 • Business Rebate Catalogs (www.pge.com/businessrebates) for rebate qualification information, Rebate Code (for the product you are installing) and
   Unit Measure (varies based on the type of product you are installing) and Rebate Per Unit.
 • Your invoice/receipt for Manufacturer and Model Number.
          Service ID#                                Rebate Code                Manufacturer                   Model #              Install        Unit Measure         Number of         Rebate Per                 Rebate Total
     Gas/Electric (10 Digits)                                                                                                        Date                                Units (A)         Unit (B)                    (A x B)

__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
1   2 3 4    5 6 7 8 9 0 f 1 0 0                                           Food Service Inc.                   cp-424              1/15/2010         oven                   1                $1,000.00                    $1,000.00

__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
9   2 8 4    5 4 7    5 9 0    H 7 3 2                                      Carrier Corp.                      58HDV040           1/24/2010          Unit                   1                   $200.00                        $200.00

__ __ __ __ __ __ __ __ __ __
2 3 4     5 6 7 7 3 2 1                             __ __ __ __ __
                                                     L 2 9 2               Efficient Lighting Co.               flt-6541             2/5/2010          fixture                 5                   $100.00                        $500.00

__ __ __ __ __ __ __ __ __ __                       __ __ __ __ __

__ __ __ __ __ __ __ __ __ __                       __ __ __ __ __

__ __ __ __ __ __ __ __ __ __                       __ __ __ __ __

__ __ __ __ __ __ __ __ __ __                       __ __ __ __ __

__ __ __ __ __ __ __ __ __ __                       __ __ __ __ __

__ __ __ __ __ __ __ __ __ __                       __ __ __ __ __
* If you need more space for additional items, either attach a separate sheet or download the form at www.pge.com/businessrebates.                                                   Total Rebate
  Section 6 - Business Property Type Description (Select the property type that best represents your business.)                                                                       FOR UTILITY USE ONLY
  ___ Assembly                                            ___ Health/Medical - Nursing Home                    ___ Restaurant Fast Food
  ___ Education Community College                         ___ Lodging Hotel                                    ___ Restaurant Sit Down
  ___ Education Primary School                            ___ Lodging Motel                                    ___ Retail Small                                                  Post field date
  ___ Education Secondary School                          ___ Manufacturing Bio Tech                           ___ Retail Single Story Large
  ___ Education University                                ___ Manufacturing Light Industry                     ___ Retail Multistory Large                                       Vendor number                      TPI code
  ___ Education - Relocatable Classroom                   ___ Office Large                                     ___ Storage Conditioned
                                                          ___ Office Small                                     ___ Storage Unconditioned                                         Rep ID
  ___ Grocery
  ___ Health/Medical Hospital
                                                                                                                                                                                 Rep phone #
  Other__________________________________ This information is required by the California Public Utilities Commission (CPUC). It will not be used for marketing purposes.
                                                                                                                                                                                       Mail check to field office
    Section 7 - Customer Signature
                                                                                                                                                                                 Total rebate
  I HAVE READ AND UNDERSTOOD THE TERMS AND CONDITIONS IN SECTION 8 OF THIS FORM. I CERTIFY THAT THE INFORMATION I HAVE PROVIDED IS TRUE AND CORRECT AND THE
  PRODUCT(S) AND/OR EQUIPMENT FOR REBATE(S) MEETS THE REQUIREMENTS IN THIS APPLICATION AND THE BUSINESS REBATE CATALOG(S). PLEASE USE BLACK OR BLUE INK.
                                                                                                                                                                                 Reviewer/Authorized signature #1

   SIGN
                                                                                                                                                                                 Authorized signature #2 (if > $5,000)
   HERE
                                                                                                                                                                                     Mail to: PG&E Business Rebates
                Signature                                                                   Name (Print)                                                         Date                Integrated Processing Center
                                                                                                                                                                                     P.O. Box 7265
                                                                                                                                                                                     San Francisco, CA 94120-7265
                                                                                                              4
 Section 8 - Terms and Conditions

1. To be eligible for a rebate I understand that I must be a customer of Pacific Gas and Electric Company (PG&E) with an active meter
    serviced by PG&E. I understand that if I am installing products at more than one facility, I must identify each individual address and
    Service ID # on the "Rebate Product Information" section. All uses herein of the words "install," "installation," or similar phrases
    shall mean complete installation such that the subject products are fully functional and operational.
2. As a business customer, I agree to provide PG&E with 100% of the energy savings for the rated life of the product(s) or for a period
   of five (5) years from receipt of rebate, whichever is less. If I do not provide the energy savings or if I cease to be a customer of PG&E
   during the 5 years, I shall refund a prorated amount of rebate dollars based on the time installed.
3. I understand the program term is January 1, 2010 through December 31, 2012 (the “Program Term”). Qualifying new products
   purchased and installed within the Program Term are eligible for a rebate. Program offerings and rebate amounts may change
   during the Program Term. Resale products, products leased less than 5 years, rebuilt, rented, received from warranty or insurance
   claims, exchanged, won as a prize, or new parts installed in existing products, do not qualify. The Program may be modified or
   terminated without prior notice, and payments are subject to the availability of Program funding. To be eligible for a rebate,
   applications with required documentation must be received by PG&E’s Integrated Processing Center (IPC) postmarked no later than
   60 calendar days following the expiration of the Program Term.

   For products with the same energy efficiency specification(s) at the same rebate level(s) continuing from the prior program year,
   applications with the required documentation may be eligible for a rebate depending on the date received by PG&E’s IPC and fund
   availability.
4. I understand that this signed and dated "2010-2012 Business Rebate Application," completed "Rebate Product Information"
   incorporated herein by this reference, all appropriate proof(s) of purchase information, and other required documentation as
   referenced in this application must be received by PG&E's IPC to be considered eligible for payment of a rebate. Unless an application
   is selected for verification, a rebate check for qualifying product(s) is generally mailed 6 to 8 weeks after PG&E receives a completed
   application including all required documentation. An incomplete application cannot be processed for payment.
5. I will allow, if requested, a representative from PG&E, the California Public Utilities Commission (CPUC), or any authorized third party
   reasonable access to my property to verify the installed product I have purchased before a rebate is paid. I understand that a rebate
   will not be paid if I refuse to participate in any required verification. The verification of installation must be scheduled within 30 days
   of customer contact by PG&E. I understand that PG&E may contact the qualifying product vendor and/or installer, if needed, to
   verify purchase and/or installation and may provide my name and/or address to complete this verification.
6. I have installed a qualifying product(s) and understand that the energy-efficiency eligibility requirements for each stated product
   (as defined in the Catalog) determines the rebate amount. The rebate amount cannot exceed the purchase price.
7. I have installed a qualifying new product(s) in accordance with all applicable federal, state, and local laws, building codes, and
   manufacturer’s specifications.
8. I understand that I cannot receive a rebate for the same product or equipment from more than one California investor-owned utility
   or third party energy-efficiency program offering rebates, financing or other rebates funded with CPUC Public Goods Charge funds.
   Products discounted by PG&E at the point of sale are not eligible for additional rebates.
9. THE UTILITY MAKES NO REPRESENTATION OR WARRANTY, AND ASSUMES NO LIABILITY WITH RESPECT TO QUALITY, SAFETY,
   PERFORMANCE, OR OTHER ASPECT OF ANY DESIGN, SYSTEM OR APPLIANCE INSTALLED PURSUANT TO THIS AGREEMENT, AND
   EXPRESSLY DISCLAIMS ANY SUCH REPRESENTATION, WARRANTY OR LIABILITY. I AGREE TO INDEMNIFY PACIFIC GAS AND
   ELECTRIC COMPANY, ITS AFFILIATES, SUBSIDIARIES, PARENT COMPANY, OFFICERS, DIRECTORS, AGENTS, AND EMPLOYEES
   AGAINST ALL LOSS, DAMAGE, EXPENSE, FEES, COSTS AND LIABILITY ARISING FROM ANY MEASURES INSTALLED.
10. If a tenant, I am responsible for obtaining the property owner's permission to install the product for which I am applying for a rebate
    payment. My signature on this application indicates I have obtained this permission.
11. I understand that PG&E is not responsible for items lost or destroyed in transit through the mail or electronic medium. Original
    applications will become the property of PG&E.




                                                                                   Apply online: www.pge.com/mybusiness/erebates
                                                                      5
         More ways for your business to save money.
         Looking for more information on Pacific Gas and Electric Company’s (PG&E) rebates and
         incentives for your business? Visit www.pge.com/businessrebates to access the latest
         rebate information, catalogs, and guidance for your next energy efficiency upgrade.
         Apply for your rebate online through eRebates at www.pge.com/mybusiness/erebates.
         Using eRebates is fast, efficient, and provides you step-by-step instructions. With eRebates
         you can check the status of your rebate application, both paper and online submittals.
         In addition to rebates, you can find a wide range of tools and resources at
         www.pge.com/mybusiness/energysavingsrebates that can help your business save
         energy, money and help the environment:
         •   Sign up for PG&E's Automated Benchmarking Service at www.pge.com/benchmarking.
             Use ENERGY STAR® Portfolio Manager to track and compare your facility's energy
             performance over time.
         •   Use PG&E’s audit tools to identify options for saving energy and money at your facility,
             and get started on developing a comprehensive energy management plan.
         •   Find a suite of customized incentives for retrofitting outdated, inefficient equipment,
             as well as incentives to optimize existing equipment through retrocommissioning.
         •   Explore PG&E's demand response programs that offer incentives for managing your
             energy use during times of peak demand.
         •   Check out PG&E’s incentives for solar, wind and fuel cell self-generation equipment,
             if you’re considering generating your own electricity.
         Learn more about these programs, tools and offers at www.pge.com/mybusiness, or
         contact the Business Customer Service Center at 1-800-468-4743 with questions.
         Ready to get started with your next project, and need the help of a contractor? Find local
         vendors who participate in PG&E's Energy Efficiency Rebate programs at
         www.pge.com/tradeprodirectory.




             ®




"PG&E" refers to Pacific Gas and Electric Company, a subsidiary of PG&E Corporation. ©2010 Pacific Gas and Electric Company.
All rights reserved. These offerings are funded by California utility customers and administered by PG&E under the auspices of
the California Public Utilities Commission.
PG&E prints its materials with soy-based inks on recycled paper.                            Rev. February 2010 CMM-0110-0328

				
DOCUMENT INFO