Shared by: MarijanStefanovic
HOW TO CREATE/SETUP A NETID Example of Passwords All WebCT users must have a NetID to log into WebCT. The NetID is the same username and password used for the Online Tiger09 Library System and the JSU open Labs. You must know your J- tiger@09 Number in order to create a NetID. If you do not know your J- t1ger09 tiger09! Number, contact the ID Center 601.979.2407. Once you have your J-Number, you may use the following steps to setup your NetID: Step 1. If you do not have a NetID or have forgotten it, go to RESET/CREATE YOUR NetID https://password.jsums.edu/accounts/Reset Step 2. Enter your Jnumber as the Domain username (Domain name ENTER YOUR J-NUMBER remains as Unity) and press continue. *Note: If you receive an error on this page contact NetID Support via one of the methods listed in step 6. ANSWER 4 QUESTIONS THAT Step 3. Answer the four questions about yourself and press continue. IDENTIFY YOU. *Note: If you receive an error on this page contact NetID Support via one of the methods in step 6. Step 4. Create and confirm a password that is at least seven CREATE A PASSWORD ENTER AND CONFIRM YOUR characters long and similar to the one of the following PASSWORD examples: a. Tiger09 b. tiger@09 c. t1ger09 d. tiger09! ENTER THE VERIFICATION Step 5. Enter the word verification code exactly as it appears. CODE Other Helpful Contacts Step 6. If unsuccessful setting up your NetID, call NetID Support at NetID Support 601.979.1986 601-979-1986 or send a detailed email to email@example.com with Email: firstname.lastname@example.org your name, Jnumber, contact information, and state the message Forgotten Jnumber you received when trying to create a NetID. You can not 601.979.2407 proceed until this step has been completed.