How to Install Natural Stone Veneer

Document Sample
How to Install Natural Stone Veneer Powered By Docstoc
					How to Install Natural Stone Veneer
Natural stone veneer can be applied to retaining walls, indoor or outdoor
fireplaces, wall facades, and pillars. Thin stone veneers are made from
real stone so they resist warping, cracking, fading, and chipping.
Additionally, if they do become chipped or cracked nobody will notice
since, unlike fabricated fake stone veneers, the color and texture of the
stone goes all the way through the stone. Stone veneer is also faster and
easier to apply since it is lighter and easier to handle.
Natural thin stone veneers come in a wide variety of styles and colors to
choose from. They are quarried in Arizona, Lannon, Fond Du Lac, Chilton,
and Michigan. Thin stone veneer is the ideal stone application since it
is superior in terms of being very durable and flexible in matching
nearly every style, color, and design. Stone veneers are thinner and
lighter than manufactured fake stone veneer and fiberglass stones.
The Basics
Stone veneer installation on any surface needs the same basic methods of
application. First there needs to be a moisture barrier, a frame or
structure for the mortar to grip, mortar, and then the stone of your
choice. The moisture barrier and backbone frame are necessary components
to ensure that your thin stone veneer will last a lifetime.
When installing stone Veneer to plywood, paneling, wall sheeting, wall
board, or other non stone surface:
1. Cover the wall with a moisture barrier that is weather resistant and
protects the underlying wood and the back of the stone veneer from
moisture damage.
2. Apply a metal lath, mesh, or sheeting with galvanized nails or staples
according to your local building code. This supplies rigid support for
the mortar to stick to which provides a firm backbone for your stones to
3. Apply your mortar, and on top of that apply your choice of stone
veneer with mortar in between the "joints."
4. After your mortar has hardened, simply use a stiff brush and some
water to scrape away any mortar that has found its way onto the face of
your stones.
Concrete Masonry Stucco
1. As long as the masonry contains no oils, surfactants, or other
chemicals on its surface and is clean and dry then you can feel free to
apply the stone veneers without any prep. Just make sure that the
backside of the masonry will not be exposed to a water source such has
those used for retaining walls, ponds, or garden beds.
2. If it does contain chemicals or oils simply etch the surface with
muriatic acid and score with a stiff wire brush.
3. Apply your mortar and your stone as usual.
4. If your surface has been treated with paint or other chemicals, simply
sand blast this surface away or follow directions above and apply a
barrier material, metal lath, mesh, or sheeting and install stone as you
would for a plywood wall.
Metal Buildings
1. Install paperbacked 3/8 inch expanded metal lath to metal cladding
supports. Use metal cladding supports of at least 12 to 20 gage and using
1 ¼ inches -12 pancake head super tight screws. Make sure that the screws
penetrate at least 3.8 inch beyond the inside of the metal surface and at
least every 12 inches.
2. Apply a 1/2 inch to a 3/4 scratch coat of mortar and allow it to dry
at least 48 hours.
3. Apply the mortar and install the stones.
4. After the mortar had been allowed to dry at least 24 hours simply
clean any mortar stains form the face of the stones with a stiff brush
and water.
Natural Thin Stone veneers
Natural stone veneers are durable and long lasting. In the long run, real
stone is more economical since it requires nearly zero maintenance,
should never need to be replaced under normal conditions, and resists
cracking, fading, chipping, erosion, and weather conditions.
Thin stone is available in a wide variety of colors and styles because it
is made from natural stone. Therefore you can choose from more colors and
cuts than fabricated stone.
Halquist Stone, Wisconsin's premier supplier of thin stone veneer, offers
thin stone veneer that is cut from quarries in Arizona, Wisconsin, and
Looking for a supplier of Natural Stone Veneer? View the many different
styles of Stone Veneer and granite countertops in Wisconsin that Halquist
Stone has to offer. For more information, call (262) 246-9000 or visit to request a free brochure.

Shared By: