CATIA V5R18 Course Catalog by ps94506

VIEWS: 445 PAGES: 101

									                                                         CATIA V5R18
                                                 Course Material Catalog
                                                                                     March 2008 Edition




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   1/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                            CATIA V5R18 Course Material Catalog

    CATIA Course Material .......................................................................... 5
      Analysis Solutions ................................................................................................ 5
        EST: ELFINI Structural Analysis (EDU-CAT-E-EST-F - V5R18) ............................................. 6
        FMD: FEM Solid (EDU-CAT-E-FMD-F - V5R18) ..................................................................... 7
        FMS: FEM Surface (EDU-CAT-E-FMS-F - V5R18) ................................................................. 9
        GAS: Generative Assembly Structural Analysis (EDU-CAT-E-GAS-F - V5R18) ................... 11
        GDY: Generative Dynamic Response Analysis (EDU-CAT-E-GDY-F - V5R18) ................... 13
        GPE: Generative Part Structural Analysis Expert (EDU-CAT-E-GPE-F - V5R18) ................. 14
        GPF: Generative Part Structural Analysis Fundamental (EDU-CAT-E-GPF-F - V5R18) ...... 15
        TAA: Tolerance Analysis of Deformable Assembly (EDU-CAT-E-TAA-F - V5R18) .............. 16
        V5A: CATIA V5 for Analysis (EDU-CAT-E-V5A-F - V5R18) .................................................. 17
      Equipment & Systems Engineering Solutions .................................................... 18
        CBD: Circuit Board Design (EDU-CAT-E-CBD-F - V5R18) ................................................... 19
        EC1: Electrical 3D Design and Documentation (EDU-CAT-E-EC1-F - V5R18) .................... 20
        EHF: Electical Harness Flattening (EDU-CAT-E-EHF-F - V5R18) ........................................ 21
        ELI: Electrical Librarian & Harness Installation (EDU-CAT-E-ELI-F - V5R18) ....................... 22
        EWR: Electrical Wire Routing (EDU-CAT-E-EWR-F - V5R18) .............................................. 24
        TUB: Tubing Design (EDU-CAT-E-TUB-F - V5R18) .............................................................. 25
        TUD: Tubing Diagrams (EDU-CAT-E-TUD-F - V5R18) ......................................................... 26
        TUS: Tubing Catalogs (2D Diagrams & 3D Design) (EDU-CAT-E-TUS-A - V5R18) ............. 27
        V5VE: CATIA V5 Automotive - Electrical (EDU-CAT-E-V5VE-F - V5R18) ............................ 28
      Infrastructure Solutions ....................................................................................... 29
        ADM: V5 Administration (EDU-CAT-E-ADM-F - V5R18) ....................................................... 30
        DF1: Product Data Filtering (EDU-CAT-E-DF1-F - V5R18) ................................................... 31
        PHS: Photo Studio (EDU-CAT-E-PHS-F - V5R18) ................................................................ 32
        PRO: CATIA Tools for Proficient Users (EDU-CAT-E-PRO-F - V5R18) ................................ 33
        PSO: Photo Studio Optimizer (EDU-CAT-E-PSO-F - V5R18) ............................................... 34
        RTR: Real Time Rendering (EDU-CAT-E-RTR-F - V5R18) .................................................. 35
        V4A: V4/V5 Advanced Interoperability (EDU-CAT-E-V4A-A - V5R18) .................................. 36
        V4I: V4 Integration (EDU-CAT-E-V4I-F - V5R18) .................................................................. 37
        VBA: CATIA V5 Automation (EDU-CAT-E-VBA-F - V5R18) .................................................. 38
      Mechanical Design Solutions .............................................................................. 39
        ASL: Aerospace Sheet Metal Design (EDU-CAT-E-ASL-F - V5R18) .................................... 40
        ASM: CATIA Product Design Expert (EDU-CAT-E-ASM-A - V5R18) .................................... 41
        CCV: Core & Cavity Design (EDU-CAT-E-CCV-F - V5R18) .................................................. 42
        DDR: CATIA Detail Drafting (EDU-CAT-E-DDR-F - V5R18) ................................................. 43
        DRA: Advanced Drafting & Customization (EDU-CAT-E-DRA-A - V5R18) ........................... 44
        FMP: Functional Molded Part (EDU-CAT-E-FMP-F - V5R18) ............................................... 45
        FR1: Part Design Feature Recognition (EDU-CAT-E-FR1-F - V5R18) ................................. 46
        FTA: 3D Functional Tolerancing & Annotation (EDU-CAT-E-FTA-F - V5R18) ...................... 47
        GS1: CATIA Surface Design (EDU-CAT-E-GS1-F - V5R18) ................................................. 48



www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008       2/101

The document is for study only,if any tort to your rights,please inform us,we will delete
        HA1: Healing Assistant (EDU-CAT-E-HA1-F - V5R18) ......................................................... 49
        LO1: 2D Layout for 3D Design (EDU-CAT-E-LO1-F - V5R18) .............................................. 50
        MD2: Mechanical Design V5R18 Update (EDU-CAT-E-MD2-U - V5R18) ............................. 51
        MTD: Mold Tooling Design (EDU-CAT-E-MTD-F - V5R18) ................................................... 52
        PDG: CATIA Part Design Expert (EDU-CAT-E-PDG-A - V5R18) ......................................... 53
        SMD: CATIA Generative Sheetmetal Design (EDU-CAT-E-SMD-F - V5R18) ....................... 54
        SMD: CATIA Generative Sheet Metal Design V5R18 Update (EDU-CAT-E-SMD-U - V5R18)
        SR1: Structure Design (EDU-CAT-E-SR1-F - V5R18) .......................................................... 57
        SRA: Structure Design Administration (EDU-CAT-E-SRA-A - V5R18) .................................. 59
        TG1: Tooling Design (EDU-CAT-E-TG1-F - V5R18) ............................................................. 60
        V5E: CATIA V5 Mechanical Design Expert (EDU-CAT-E-V5E-A - V5R18) .......................... 61
        V5F: CATIA V5 Fundamentals (EDU-CAT-E-V5F-F - V5R18) .............................................. 62
        V5VB: V5 Automotive - Fundamental Course for Body Designers (EDU-CAT-E-V5VB-F - V5R18)
        V5VC: V5 Automotive - Fundamental Course for Chassis Designers (EDU-CAT-E-V5VC-F - V5R18)
        V5VP: V5 Automotive - Fundamental Course for Powertrain Designers (EDU-CAT-E-V5VP-F - V5R1
        WD1: Weld Design (EDU-CAT-E-WD1-F - V5R18) ............................................................... 66
      Machining Solutions ........................................................................................... 67
        AMG: Advanced Part Machining (EDU-CAT-E-AMG-F - V5R18) .......................................... 68
        LMG: Lathe Machining (EDU-CAT-E-LMG-F - V5R18) ......................................................... 69
        MLG: Multi-Slide Lathe Machining (EDU-CAT-E-MLG-F - V5R18) ....................................... 70
        MMG: Multi-Axis Surface Machining (EDU-CAT-E-MMG-F - V5R18) ................................... 71
        MPA: Prismatic Machining Preparation Assistant (EDU-CAT-E-MPA-F - V5R18) ................ 72
        MPG: Multi Pocket Machining (EDU-CAT-E-MPG-F - V5R18) .............................................. 73
        NCI: Numerical Control Infrastructure (EDU-CAT-E-NCI-F - V5R18) .................................... 74
        PMG: Prismatic Machining (EDU-CAT-E-PMG-F - V5R18) .................................................. 75
        SMG: Surface Machining (EDU-CAT-E-SMG-F - V5R18) ..................................................... 76
        STL: STL Rapid Prototyping (EDU-CAT-E-STL-F - V5R18) .................................................. 78
      Product Synthesis Solutions ............................................................................... 79
        HMN: Human Modeling (EDU-CAT-E-HMN-F - V5R18) ........................................................ 80
        KBE: Knowledge-Based Engineering (EDU-CAT-E-KBE-F - V5R18) ................................... 81
        KBE: Knowledge-Based Engineering (EDU-CAT-E-KBE-A - V5R18) ................................... 82
        KWA: Knowledge Advisor (EDU-CAT-E-KWA-F - V5R18) .................................................... 83
        KWE: Knowledge Expert (EDU-CAT-E-KWE-F - V5R18) ..................................................... 84
        KWF: Knowledge Fundamentals (EDU-CAT-E-KWF-F - V5R18) ......................................... 85
        PEO: Product Engineering Optimizer (EDU-CAT-E-PEO-F - V5R18) ................................... 86
      Shape Design & Styling Solutions ...................................................................... 87
        DL1: Developed Shapes (EDU-CAT-E-DL1-F - V5R18) ........................................................ 88
        DSE: Digitized Shape Editor (EDU-CAT-E-DSE-F - V5R18) ................................................. 89
        DSS: Shape Sculptor (EDU-CAT-E-DSS-F - V5R18) ............................................................ 90
        FSK: FreeStyle Sketch Tracer (EDU-CAT-E-FSK-F - V5R18) .............................................. 92
        FSS: FreeStyle Shaper, Optimizer & Profiler (EDU-CAT-E-FSS-F - V5R18) ........................ 93
        GSD: Surface Design Expert (EDU-CAT-E-GSD-F - V5R18) ............................................... 94



www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008       3/101

The document is for study only,if any tort to your rights,please inform us,we will delete
        GSO: Generative Shape Optimizer (EDU-CAT-E-GSO-F - V5R18) ...................................... 95
        HD2: Generative Shape Design V5R18 Update (EDU-CAT-E-HD2-U - V5R18) ................... 97
        IMA: Imagine & Shape (EDU-CAT-E-IMA-F - V5R18) ........................................................... 98
        QSR: Quick Surface Reconstruction (EDU-CAT-E-QSR-F - V5R18) .................................... 99
        RSO: Realistic Shape Optimizer (EDU-CAT-E-RSO-F - V5R18) ........................................ 100
        V5S: V5 Surface Design (EDU-CAT-E-V5S-F - V5R18) ...................................................... 101




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008     4/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                                                             CATIA Course Material

                                                                                       Analysis Solutions




www.cadfamily.com contact:cadserv21@hotmail.com
                              CATIA V5R18 Course Catalog                                    Mar 11, 2008   5/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            EST: ELFINI Structural Analysis
                        Solutions

     Course Code                          EDU-CAT-E-EST-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-EST-FI-V5R17
                                          Foils: EDU-CAT-E-EST-FF-V5R17
                                          Exercises: EDU-CAT-E-EST-FX-V5R17

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Use the advanced pre-processing capabilities (such as loads and boundary
                                          conditions) to create more realistic FE models.
                                          - Visualize the images of objects used for pre-processing (which is not possible
                                          in GPS).
                                          - Use advanced case features (such as Buckling, MultiLoads, Envelope) in
                                          addition to the standard Static and Frequency cases
                                          - Create your own result image templates, customize the post-processing result
                                          images, group selective entitites in the result images, and create advanced
                                          reports

     Participants' Profile
                                          Mechanical Designers
                                          Structural Analysts

     Prerequisites
                                          Generative Part Structural Analysis Fundamentals, Generative Assembly
                                          Structural Analysis, FEM Surface Meshing

     Content
                                          - Introduction to EST Analysis
                                          - Advanced Pre-Processing
                                          - Advanced Analysis Case Management
                                          - Advanced Post-Processing
                                          - Master Exercises
                                          - Added Exercises


     Exercises
                                          Ex. 1: Advanced Analysis of Landing Gear Assembly (120min) / Aerospace
                                          Ex. 2: Blade Analysis (120min) / Aerospace




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008       6/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            FMD: FEM Solid
                        Solutions

     Course Code                          EDU-CAT-E-FMD-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-FMD-FI-V5R18
                                          Foils: EDU-CAT-E-FMD-FF-V5R18
                                          Exercises: EDU-CAT-E-FMD-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-FMD-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Use different solid meshers such as Tetrahedron Filler, OCTREE Tetrahedron
                                          Mesher, Sweep3D Mesher
                                          - Create a solid mesh using mesh part transformations like Translation,
                                          Rotation, and Symmetry on 3D mesh parts
                                          - Analyze the solid meshes using the available mesh quality criteria
                                          - Import/Export the meshes into/from CATIA

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          - Generative Part Structural Analysis Fundamentals
                                          - Generative Part Structural Analysis Expert
                                          - Generative Assembly Structural Analysis
                                          - FEM Surface Meshing




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008   7/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Content
                                          This course will teach you how to generate a 3D tetrahedron mesh by focusing
                                          on the transformation methods used to create new mesh models from an
                                          existing 2D or 3D mesh. It will teach you how to analyze the quality of the
                                          resulting mesh and visualize internal mesh elements.

                                          Introduction to FEM Solid
                                          - What is FEM Solid
                                          - User Interface
                                          - General Process for Solid Mesh Generation
                                          - Accessing the Workbench

                                          Tetrahedron Filler
                                          - What is Tetrahedron Filler
                                          - Tetrahedron Filler Parameters
                                          - Generating Solid Mesh Using Tetrahedron Filler

                                          OCTREE Tetrahedron Mesher
                                          - What is OCTREE Tetrahedron Mesher
                                          - OCTREE Tetrahedron Mesher - Local Parameters
                                          - OCTREE Tetrahedron mesher - Quality Parameters
                                          - OCTREE Tetrahedron mesher - Other Parameters
                                          - Generating Mesh Using OCTREE Tetrahedron Mesher

                                          Sweep 3D
                                          - What is Sweep 3D
                                          - Generating Solid Mesh Using Sweep 3D

                                          Mesh Part Transformations
                                          - What is Mesh Part Transformations
                                          - Solid Mesh Generation Using Translation
                                          - Solid Mesh Generation Using Rotation
                                          - Solid Mesh Generation Using Symmetry

                                          Mesh Part Extrusion
                                          - What is Mesh Part Extrusion
                                          - Solid Mesh Generation Using Extrusion with Translation
                                          - Solid Mesh Generation Using Extrusion with Rotation
                                          - Solid Mesh Generation Using Extrusion with Symmetry
                                          - Solid Mesh Generation Using Extrusion along Spine

                                          Mesh Analysis and Mesh Data Transfer
                                          - Quality Analysis
                                          - Cutting Plane Analysis
                                          - Import/Export Meshes


     Exercises
                                          Ex. 1: OCTREE Tetrahedron Mesher (15min) / All sectors
                                          Ex. 2: Solid Meshing Using Sweep 3D (5min) / All sectors
                                          Ex. 3: Mesh Part Transformation (15min) / All sectors
                                          Ex. 4: Mesh Part Extrusion (15min) / All sectors
                                          Ex. 5: Master Exercise: Meshing of an Engine Cylinder Block (60min) / All
                                          sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008     8/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            FMS: FEM Surface
                        Solutions

     Course Code                          EDU-CAT-E-FMS-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-FMS-FI-V5R18
                                          Foils: EDU-CAT-E-FMS-FF-V5R18
                                          Exercises: EDU-CAT-E-FMS-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-FMS-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Use the various Meshers such as Surface Mesher, Advanced Surface
                                          Mesher, Beam Mesher, and OCTREE Triangle Mesher
                                          - Create a new mesh using existing mesh with the help of mesh transformation
                                          tools and mesh operators
                                          - Edit the mesh using the mesh edition tools available within the above
                                          mentioned meshers
                                          - Analyze the mesh quality using mesh quality checks and tools like Free
                                          Edges, Duplicate Elements, Duplicate Nodes, Mesh Interference Checks, etc.

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          - Generative Part Structural Analysis Fundamentals
                                          - Generative Assembly Structural Analysis

     Content
                                          This course will teach you how to create a FE model for a complex surface
                                          part, and how to simplify geometric data so as to optimize the meshing
                                          process. You will learn how to manage surface and beam meshes, modify
                                          meshes and node distributions, and perform interference and quality checks.

                                          - Introduction to FEM Surface
                                          - Advanced Surface Mesh
                                          - Surface Mesh
                                          - OCTREE Triangle Mesher
                                          - Mesh Operators
                                          - Mesh Transformations
                                          - Update Mesh
                                          - Mesh Analysis Tools
                                          - Import/Export Meshes
                                          - Welding Connections




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008   9/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Exercises
                                          Ex. 1: Floor Mesh (20min) / All sectors
                                          Ex. 2: Fuselage Door Static Analysis (30min) / All sectors
                                          Ex. 3: Surface Mesher (75min) / All sectors
                                          Ex. 4: Octree Mesh on Block Cylinder (15min) / All sectors
                                          Ex. 5: Hybrid Mesh: 1D and 2D (30min) / All sectors
                                          Ex. 6: Extrude 1D Element Into 2D Mesh (15min) / All sectors
                                          Ex. 7: Mesh Parameters Exposition to Knowledge (30min) / All sectors
                                          Ex. 8: Mesh Parameters Exposition to Knowledge 2 (10min) / All sectors
                                          Ex. 9: Mesh Parameters Exposition to Knowledge 3 (5min) / All sectors
                                          Ex. 10: Meshing Parametric Conceptual Body (60min) / All sectors
                                          Ex. 11: Seam Welding Analysis (60min) / All sectors
                                          Ex. 12: Compatible Seam Welds (30min) / All sectors
                                          Ex. 13: Spot Welding With Hemming (15min) / All sectors
                                          Ex. 14: Fuselage Connection (60min) / All sectors
                                          Ex. 15: Master Exercise 1: Meshing of a Crossmember (60min) / All sectors
                                          Ex. 16: Wing Structure Analysis (60min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      10/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            GAS: Generative Assembly Structural Analysis
                        Solutions

     Course Code                          EDU-CAT-E-GAS-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-GAS-FI-V5R18
                                          Foils: EDU-CAT-E-GAS-FF-V5R18
                                          Exercises: EDU-CAT-E-GAS-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-GAS-FS-V5R18

     Objectives
                                          - Use different types of hypotheses for an assembly analysis
                                          - Define analysis connections between assembly components
                                          - Use existing assembly constraints to automatically create connections
                                          - Assign a connection property to the appropriate analysis connection
                                          - Compute a static analysis for an assembly
                                          - Create and manage an analysis assembly model from existing meshed parts

     Participants' Profile
                                          Mechanical Designers
                                          Structural Analysts

     Prerequisites
                                          Generative Part Structural Analysis Fundamentals
                                          Generative Part Structural Analysis Expert




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008   11/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Content
                                          This course will teach you how to perform a Finite Element Analysis using an
                                          existing assembly, and will focus on the creation of connections between
                                          assembly components and how to assign appropriate connection properties.
                                          You will also learn how to create an analysis assembly from existing meshed
                                          parts.

                                          Introduction to GAS
                                          - What is Generative Assembly Structural Analysis
                                          -Assembly Analysis Overview
                                          -Analysis Assembly Overview
                                          -what is GAS
                                          -Hypotheses Used for Analysis

                                          Analysis Connections
                                          -What is Analysis Connection
                                          -General Analysis Connection
                                          -Defining Line Analysis Connections
                                          -Defining Point Analysis Connections
                                          -Defining Surface Analysis Connections
                                          -Points to Points Analysis Connection

                                          GAS Connections
                                          -Face Face Connection Properties
                                          -Distant Connection Properties
                                          -Welding Connection Properties
                                          -Nodes to Nodes Connection Property

                                          Analysis Assembly Management
                                          -What is Analysis Assembly
                                          -Why Use Analysis Assembly
                                          -Analysis Assembly Process
                                          -What is Shape Representation
                                          -How to Attach Shape to Part
                                          -What is Analysis Assembly 2D Viewer
                                          -How to Use Analysis Assembly 2D Viewer


     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008    12/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            GDY: Generative Dynamic Response Analysis
                        Solutions

     Course Code                          EDU-CAT-E-GDY-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-GDY-FI-V5R18
                                          Foils: EDU-CAT-E-GDY-FF-V5R18
                                          Exercises: EDU-CAT-E-GDY-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-GDY-FS-V5R18

     Objectives
                                          - Recognize the differences between harmonic and transient analyses
                                          - Define load and restraint excitations
                                          - Ensure that the appropriate pre-requisites are defined for the required
                                          excitation case
                                          - Visualize and animate 3D images of the analysis results
                                          - Generate translation, velocity and acceleration graphs
                                          - Export result data in Text or Excel format

     Participants' Profile
                                          Mechanical Designers
                                          Structural Analysts

     Prerequisites
                                          Generative Part Structural Analysis Fundamentals
                                          Generative Part Structural Analysis Expert

     Content
                                          This course will teach you how to perform a harmonic or transient analysis on a
                                          single part using finite elements. You will learn how to generate and visualize
                                          2D graphical results and how to export the resulting data.

                                          Introduction to GDY
                                          -What are the Different Types of Dynamic Analysis
                                          -Load or Restraint Excitation
                                          -Prerequisites

                                          GDY Preprocessing
                                          -Harmonic Response Case
                                          -Transient Response Analysis

                                          Results Visualization
                                          - Generating Images
                                          - Generating 2D Display



     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008      13/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            GPE: Generative Part Structural Analysis Expert
                        Solutions

     Course Code                          EDU-CAT-E-GPE-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-GPE-FI-V5R18
                                          Foils: EDU-CAT-E-GPE-FF-V5R18
                                          Exercises: EDU-CAT-E-GPE-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-GPE-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Define and customize material properties
                                          - Apply pressure, acceleration and force density loads; and define virtual parts
                                          - Apply pivot, ball-joint, and user-defined restraints
                                          - Compute a frequency analysis for a single part
                                          - Create planar sections with which to visualize internal result values
                                          - Compute and refine a mesh using adaptive meshing in order to achieve a
                                          pre-defined accuracy

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          CATIA V5 Fundamentals
                                          Generative Part Structural Analysis Fundamentals

     Content
                                          This course will focus on advanced Finite Element Analysis pre-processing
                                          techniques and post-processing tools, including the concept of virtual parts to
                                          avoid excessive geometric modeling. It will teach you how to perform a
                                          frequency analysis on a single part, and the use of adaptive meshing to
                                          achieve pre-defined accuracy.

                                          GPS Advanced Pre-Processing Tools
                                          - Advanced Pre-Processing Tools
                                          - Frequency Analysis

                                          Computation
                                          - Computing a Frequency Case
                                          - Computing with Adaptivity
                                          - Historic of Computation

                                          GPS Advanced post-Processing Tools
                                          - Results Visualization
                                          - Results Management
                                          - Refinement


     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      14/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            GPF: Generative Part Structural Analysis
                        Solutions
                                            Fundamental
     Course Code                          EDU-CAT-E-GPF-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-GPF-FI-V5R18
                                          Foils: EDU-CAT-E-GPF-FF-V5R18
                                          Exercises: EDU-CAT-E-GPF-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-GPF-FS-V5R18

     Objectives
                                          This course covers the main tools for Structural Analysis on a single part.
                                          Throughout this course, you will learn how to perform a basic static analysis
                                          using the finite elements method.

     Participants' Profile
                                          CATIA Designers

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          Introduction to Finite Element Analysis
                                          - What is Finite Element Analysis
                                          - Why to Use Finite Element Analysis
                                          - Application of Finite Element Analysis

                                          Introduction to GPS Analysis
                                          - Accessing the Generative Part Structural Analysis Workbench
                                          - The Generative Part Structural Analysis Interface
                                          - The GPS General Process
                                          - The Generative Part Structural Analysis Tree Structure

                                          GPS Pre-Processing
                                          - Managing Mesh-Part
                                          - Defining Restraints
                                          - Defining Loads

                                          Computation
                                          - Specifying the External Storage
                                          - Computing a Static Case

                                          GPS Post-Processing
                                          - Results Visualization
                                          - Results Management
                                          - Refinement

                                          Managing Analysis
                                          - About Saving an Analysis Document
                                          - About Save As
                                          - How to Use Save Management
                                          - Saving Document Using ‘Send To’ Mechanism
                                          - User Settings

     Notes


     Exercises
                                          None


www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      15/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            TAA: Tolerance Analysis of Deformable Assembly
                        Solutions

     Course Code                          EDU-CAT-E-TAA-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-TAA-FI-V5R17
                                          Foils: EDU-CAT-E-TAA-FF-V5R17
                                          Exercises: EDU-CAT-E-TAA-FX-V5R17

     Objectives
                                          Upon completion of this course you will,
                                          Set up, compute and visualize a simple tolerance analysis of flexible
                                          assemblies in CATIA V5.
                                          This course is an overview of Tolerance Analysis of Deformable Assembly
                                          (TAA) product.

     Participants' Profile
                                          Mechanical Engineer, Tolerancing Engineer, FEM Analyst, Manufacturing
                                          Engineer.

     Prerequisites
                                          Product Structure, Part Design, Assembly Design, Generative Shape Design,
                                          Functional Tolerancing & Annotations, Generative Part Structural Analysis
                                          Fundamentals, Generative Part Structural Analysis Expert, FEM Surface
                                          Meshing, FEM Solid Meshing, Generative Assembly Structural Analysis.

     Content
                                          - Introduction to TAA
                                          - Creating Tolerance Analysis Elements
                                          - Tolerance Analysis
                                          - Frequently Asked Questions
                                          - Master Exercise
                                          - To Sum Up



     Exercises
                                          Ex. 1: Interactive Tolerance analysis : Application (480min) / Aerospace,
                                          Automotive, Shipbuilding




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   16/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                        Analysis            V5A: CATIA V5 for Analysis
                        Solutions

     Course Code                          EDU-CAT-E-V5A-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V5A-FI-V5R18
                                          Foils: EDU-CAT-E-V5A-FF-V5R18

     Objectives
                                          This course is designed using a process-based approach to training. Rather
                                          than focusing on individual features and functions, this course emphasizes on
                                          the processes and procedures required to complete a particular task. By using
                                          the case studies to illustrate these processes, you will learn the necessary
                                          commands, options, and menus within the context of completing a design task.

     Participants' Profile
                                          New CATIA V5 mechanical designers

     Prerequisites
                                          Students attending this course should have the following experience:
                                          - Mechanical design experience
                                          - CATIA Basics

     Content
                                          - Introduction to Finite Element Analysis
                                          - Pre-processing
                                          - Computation
                                          - Post-processing
                                          - Mesh refinement
                                          - Assembly Structural Analysis

     Exercises
                                          Ex. 1: Introducation to Finite Element Analsyis (130min) / All sectors
                                          Ex. 2: Pre-processing (90min) / All sectors
                                          Ex. 3: Computation (45min) / All sectors
                                          Ex. 4: Post-processing (45min) / All sectors
                                          Ex. 5: Mesh Refinement (15min) / All sectors
                                          Ex. 6: Assembly Structural Analysis (60min) / All sectors
                                          Ex. 7: Master Project (120min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008       17/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                                                             CATIA Course Material

                                Equipment & Systems Engineering Solutions




www.cadfamily.com contact:cadserv21@hotmail.com
                              CATIA V5R18 Course Catalog                                    Mar 11, 2008   18/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       CBD: Circuit Board Design
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-CBD-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-CBD-FI-V5R17
                                          Foils: EDU-CAT-E-CBD-FF-V5R17
                                          Exercises: EDU-CAT-E-CBD-FX-V5R17
                                          Detailed Steps: EDU-CAT-E-CBD-FS-V5R17

     Objectives
                                          Upon completion of this course you will be able to create Printed Circuit Boards
                                          (PCB) in context of Assemblies and export/import them to/from an ECAD tool
                                          using the IDF interface.

     Participants' Profile
                                          Electrical Designers

     Prerequisites
                                          Students attending this course should have the knowledge of CATIA V5
                                          Fundamentals, Part Design, Assembly Design

     Content
                                          - Introduction to Circuit Board Design
                                          - Creating the PCB geometry with Mounting Holes
                                          - Constraint Areas and Components
                                          - Export and Import using the IDF Interface
                                          - Creating a Catalog of Electrical Components
                                          - To Sum Up
                                          - Master Exercise: Connector Box
                                          - Added Exercise: Camera


     Exercises
                                          Ex. 1: Transformer (45min) / Electronics & Electrical
                                          Ex. 2: Connector Box (40min) / Electronics & Electrical
                                          Ex. 3: Camera (30min) / Electronics & Electrical




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      19/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       EC1: Electrical 3D Design and Documentation
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-EC1-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-EC1-FI-V5R18
                                          Foils: EDU-CAT-E-EC1-FF-V5R18
                                          Exercises: EDU-CAT-E-EC1-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Create the harness suitable for the consumer goods
                                          - Design the wire harness for appliances
                                          - Route the signal and create the wires
                                          - Flatten and synchronize an electrical or geometrical harness
                                          - Generate harness documentation
                                          - Generate simple drawings

     Participants' Profile
                                          Consumer goods Electrical Harness Designers

     Prerequisites
                                          Mechanical Design concepts
                                          Knowledge of Part Design, Assembly Design and Drafting workbenches

     Content
                                          - Electrical Design and Documentation
                                          - Creating Electrical Components Library
                                          - Creating and Managing the Harness
                                          - Wire Routing
                                          - Harness Flattening
                                          - Drawing Introduction

     What is new in this release
                                          New course

     Exercises
                                          Ex. 1: Defining Electrical Components / All sectors
                                          Ex. 2: Creating an Electrical Parts Catalog / All sectors
                                          Ex. 3: Creating an Electrical Assembly / All sectors
                                          Ex. 4: Bundle Segment Definition / All sectors
                                          Ex. 5: Split a Bundle Segment / All sectors
                                          Ex. 6: External Data Exchange for Wire Routing / All sectors
                                          Ex. 7: Extracting Harness / All sectors
                                          Ex. 8: Manipulating the Harness / All sectors
                                          Ex. 9: Synchronizing the Harness / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008   20/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       EHF: Electical Harness Flattening
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-EHF-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-EHF-FI-V5R18
                                          Foils: EDU-CAT-E-EHF-FF-V5R18
                                          Exercises: EDU-CAT-E-EHF-FX-V5R18

     Objectives
                                          In this course you will learn how to flatten an electrical or geometrical harness
                                          integrated within the DMU and how to modify the bundle segments of the
                                          harness to fit your drawing in order to build the harness documentation

     Participants' Profile
                                          Electrical V5 users

     Prerequisites
                                          PRO-F: CATIA Tools for Proficient Users
                                          EHI-F: Electrical Harness Installation
                                          ELB-F: Electrical Librarian

     Content
                                          Introduction to Harness Flattening
                                          Harness Flattening parameters
                                          Extracting data
                                          Harness flattening modifications
                                          Synchronize
                                          Links visualization
                                          Reports
                                          Drawing
                                          Catalog text template creation
                                          Graphic Replacement

     Exercises
                                          Ex. 1: Harness Documentation / Electronics & Electrical
                                          Ex. 2: Harness Flattening / Electronics & Electrical
                                          Ex. 3: Harness Documentation (2) / Electronics & Electrical
                                          Ex. 4: Harness Flattening (2) / Electronics & Electrical




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008       21/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       ELI: Electrical Librarian & Harness Installation
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-ELI-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-ELI-FI-V5R18
                                          Foils: EDU-CAT-E-ELI-FF-V5R18
                                          Exercises: EDU-CAT-E-ELI-FX-V5R18

     Objectives
                                          In this course you will learn how to build and manage an electrical components
                                          catalog, to design a harness integrated within the DMU and then connect the
                                          bundle segments to electrical components.

     Participants' Profile
                                          New Electrical V5 users

     Prerequisites
                                          Catalog Editor
                                          art Design
                                          CATIA V5 basics (mandatory)

     Content
                                          Introduction to Electrical Librarian
                                          Electrical Componentas Definition
                                          Electrical Librarian Catalog Management
                                          Electrical Assemblies
                                          Introduction to Electrical Harness Installation
                                          Electrical Harness Settings
                                          Geometric Bundle definition
                                          Position Electrical Devices
                                          Bundle segment Definition
                                          Managing a Branch Point
                                          Delete Branch
                                          Split a Bundle segment
                                          Transfer Branches
                                          Instantiate a protection
                                          Adjust Diameter
                                          Links Management
                                          Local slack management
                                          Support Management
                                          Measure geometrical bundle inertia
                                          V4/V5 Migration
                                          Wires Management
                                          Importing electrical external data for 3D implementation




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008     22/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Exercises
                                          Ex. 1: Creating a catalog (10min) / All sectors
                                          Ex. 2: Defining a set of electrical components (40min) / All sectors
                                          Ex. 3: Store components in a catalog (15min) / All sectors
                                          Ex. 4: Define an assembly with the components from the catalog (15min) / All
                                          sectors
                                          Ex. 5: Create a protection and store it into a catalog (15min) / All sectors
                                          Ex. 6: Bundle Segment Definition (15min) / All sectors
                                          Ex. 7: Create an adaptative support and position Bundle Segment (30min) / All
                                          sectors
                                          Ex. 8: Link a bundle segment (10min) / All sectors
                                          Ex. 9: Add a Support to a Bundle Segment (5min) / All sectors
                                          Ex. 10: Add Local Slack to Bundle Segment portion (5min) / All sectors
                                          Ex. 11: Manage the bundle segment section (30min) / All sectors
                                          Ex. 12: Transfer Branches (15min) / All sectors
                                          Ex. 13: Instantiate a Protection (15min) / All sectors
                                          Ex. 14: Adjusts Diameter (10min) / All sectors
                                          Ex. 15: Split a Bundle Segment (10min) / All sectors
                                          Ex. 16: Define a Bundle Segment (20min) / All sectors
                                          Ex. 17: Harness Design / All sectors
                                          Ex. 18: Geometrical bundle inertia / All sectors
                                          Ex. 19: Knowledge (20min) / All sectors
                                          Ex. 20: External Data (30min) / All sectors
                                          Ex. 21: Electrical Harness installation / All sectors
                                          Ex. 22: Car Door / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      23/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       EWR: Electrical Wire Routing
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-EWR-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-EWR-FI-V5R18
                                          Foils: EDU-CAT-E-EWR-FF-V5R18
                                          Exercises: EDU-CAT-E-EWR-FX-V5R18

     Objectives
                                          At the end of this course, participants will be able to:
                                          - Route wires in a harness.
                                          - Route signals in space reservation system
                                          - Use knowledgeware for segregation rules

     Participants' Profile
                                          New V5 CATIA electrical users

     Prerequisites
                                          CATIA V5 Part Design
                                          CATIA V5 Assembly Design

     Content
                                          Introduction to Electrical Wire Routing
                                          Import External Data
                                          Wires Management

     Exercises
                                          Ex. 1: External Data Exchange (60min) / All sectors
                                          Ex. 2: External Data (60min) / All sectors
                                          Ex. 3: External Data Exchange (60min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                               Mar 11, 2008   24/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       TUB: Tubing Design
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-TUB-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-TUB-FI-V5R18
                                          Foils: EDU-CAT-E-TUB-FF-V5R18
                                          Exercises: EDU-CAT-E-TUB-FX-V5R18

     Objectives
                                          In this course you will learn how the CATIA Tubing Design product is used to
                                          quickly and efficiently create an intelligent tubing layout.

     Participants' Profile
                                          Experienced CATIA V5 users

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          - Introduction to Tubing Design
                                          - Tubing Design Fundamentals
                                          - Modifying Tubing Designs
                                          - Managing Tubing Designs
                                          - Added Functionalities

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008      25/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       TUD: Tubing Diagrams
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-TUD-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-TUD-FI-V5R18
                                          Foils: EDU-CAT-E-TUD-FF-V5R18
                                          Exercises: EDU-CAT-E-TUD-FX-V5R18

     Objectives
                                          This course illustrates how the Tubing Diagram product could be used to
                                          quickly and efficiently create a schematic diagram.

     Participants' Profile
                                          Experienced CATIA V5 Users

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          - Introduction
                                          - Tubing Diagram Creation
                                          - Diagram Modification/Annotation/Reports
                                          - Design Checks
                                          - Analysis

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   26/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       TUS: Tubing Catalogs (2D Diagrams & 3D Design)
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-TUS-A
     Brand & Release                      CATIA V5R18
     Duration                             4 days
     Language                             English
     Level                                Advanced
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-TUS-AI-V5R18
                                          Foils: EDU-CAT-E-TUS-AF-V5R18
                                          Exercises: EDU-CAT-E-TUS-AX-V5R18
                                          Detailed Steps: EDU-CAT-E-TUS-AS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Manage object classes in the Feature Dictionary
                                          - Create 2D Diagram Catalogs and 3D Design Catalogs
                                          - Create Standards Catalogs, Design Rules Catalogs
                                          - Create Reports
                                          - Customize the settings for Drawings

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          CATIA V5 Fundamentals
                                          - Tubing Design
                                          - Tubing Diagrams
                                          - ESA

     Content
                                          - Introduction to Tubing Catalogs
                                          - Tubing Workbench Customization
                                          - Creating a Report
                                          - Drawing Production Settings

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   27/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Equipment & Systems       V5VE: CATIA V5 Automotive - Electrical
                      Engineering
                       Solutions
     Course Code                          EDU-CAT-E-V5VE-F
     Brand & Release                      CATIA V5R18
     Duration                             6 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V5VE-FI-V5R18
                                          Foils: EDU-CAT-E-V5VE-FF-V5R18

     Objectives
                                          The aim of the course is to teach you how to build parts and assemblies in
                                          CATIA and hwo to make simple drawings of these parts and assemblies. This
                                          course also teaches you to create a library of electrical parts, instantiate
                                          electrical devices from a catalog, route electrical harness in your digital
                                          mock-up, route wires in the harness, extract harness and create harness
                                          drawings.

     Participants' Profile
                                          Automotive Electrical Harness Designers
                                          New Electrical V5 Users

     Prerequisites
                                          Experience in Mechanical Design

     Content
                                          - Introduction to CATIA
                                          - Profile Creation
                                          - Basic Features
                                          - Assembly Design
                                          - Designing in Context
                                          - Drafting (ISO)
                                          - Introduction to Electrical Library Products
                                          - Creating Electrical Harness
                                          - Routing Electrical Wires
                                          - Flattening Electrical Harness
                                          - Creating Electrical Harness Documentation

     What is new in this release
                                          New course

     Exercises
                                          Ex. 1: Master Project: V5 Automotive Electrical / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008   28/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                                                             CATIA Course Material

                                                                             Infrastructure Solutions




www.cadfamily.com contact:cadserv21@hotmail.com
                              CATIA V5R18 Course Catalog                                    Mar 11, 2008   29/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         ADM: V5 Administration
                       Solutions

     Course Code                          EDU-CAT-E-ADM-F
     Brand & Release                      CATIA V5R18
     Duration                             3 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-ADM-FI-V5R18
                                          Foils: EDU-CAT-E-ADM-FF-V5R18
                                          Exercises: EDU-CAT-E-ADM-FX-V5R18

     Objectives
                                          This course tells you how to install, customize and maintain CATIA V5 site

     Participants' Profile
                                          Administrators of CATIA V5

     Prerequisites
                                          - System Administration
                                          - CATIA Administration

     Content
                                          - CATIA Installation
                                          - Licensing
                                          - Environment Management
                                          - Settings Management
                                          - Standards
                                          - Software Management
                                          - Tools
                                          - Data Managment
                                          - Interoperability


     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008       30/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         DF1: Product Data Filtering
                       Solutions

     Course Code                          EDU-CAT-E-DF1-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-DF1-FI-V5R18
                                          Foils: EDU-CAT-E-DF1-FF-V5R18
                                          Exercises: EDU-CAT-E-DF1-FX-V5R18

     Objectives
                                          In the course you will learn how to use Product Data Filtering (DF1) to convert
                                          parts or products to datum surfaces and solids.
                                          The main objective of filtering is to hide the design process by removing all
                                          intermediate objects and associativity links. Another goal might be simply to
                                          reduce the size of models.

     Participants' Profile
                                          All designers

     Prerequisites
                                          Mechanical or hybrid design.

     Content
                                          Introduction to Product Data Filtering
                                          - Why do you need DF1 ?
                                          Workbench presentation
                                          - Accessing the workbench
                                          Data Filtering
                                          - Filter a Part
                                          - Filter a Product

     Exercises
                                          Ex. 1: Part (15min) / All sectors
                                          Ex. 2: Product (15min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008      31/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         PHS: Photo Studio
                       Solutions

     Course Code                          EDU-CAT-E-PHS-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-PHS-FI-V5R18
                                          Foils: EDU-CAT-E-PHS-FF-V5R18
                                          Exercises: EDU-CAT-E-PHS-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-PHS-FS-V5R18

     Objectives
                                          Objectives of the Course

                                          Upon completion of this course you will be able to:
                                          - Create photo realistic images using the Photo Studio workbench
                                          - Create and apply stickers to your models
                                          - Create animations using different techniques

     Participants' Profile
                                          Industrial Stylists and Designers

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          - Introduction
                                          - Environment management
                                          - Camera management
                                          - Light sources management
                                          - Shooting management
                                          - Textures management
                                          - Stickers management
                                          - Animation: Turntable management
                                          - Animation: Animating scene elements
                                          - Catalogs

     Exercises
                                          Ex. 1: Phone Handset (150min) / Fabrication & Assemblies Consumer Goods




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008    32/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         PRO: CATIA Tools for Proficient Users
                       Solutions

     Course Code                          EDU-CAT-E-PRO-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-PRO-FI-V5R18
                                          Foils: EDU-CAT-E-PRO-FF-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          -Create and reuse advanced replication tools like Power Copies
                                          -Store components and Power copies into catalog and reuse them in a new
                                          context
                                          -Analyze and convert CATIA V4 models to CATIA V5

     Participants' Profile
                                          Advanced Users

     Prerequisites
                                          Students attending this course should have knowledge of CATIA BASICS and
                                          Part Design

     Content
                                          This course will teach you how to use advanced CATIA tools to re-use existing
                                          CATIA V4 and CATIA V5 model data. You will learn how to make use of
                                          component catalogs, and how to store and create re-usable parameterized
                                          features.

                                          - Creating and Using Power Copy
                                          - Creating Catalogs of Components
                                          - From CATIA V4 to V5 Basics
                                          - Course Summary

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      33/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         PSO: Photo Studio Optimizer
                       Solutions

     Course Code                          EDU-CAT-E-PSO-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-PSO-FI-V5R18
                                          Foils: EDU-CAT-E-PSO-FF-V5R18

     Objectives
                                          Upon completion of this course you will be able to use the various Photo Studio
                                          Optimizer tools to enhance the quality of your photo realistic images.

     Participants' Profile
                                          Industrial Stylists and Designers

     Prerequisites
                                          CATIA V5 Fundamentals
                                          CATIA Photo Studio

     Content
                                          - 3D textures
                                          - Bump mapping
                                          - Global illumination
                                          - Caustics
                                          - Visual effects

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008      34/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         RTR: Real Time Rendering
                       Solutions

     Course Code                          EDU-CAT-E-RTR-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-RTR-FI-V5R18
                                          Foils: EDU-CAT-E-RTR-FF-V5R18
                                          Exercises: EDU-CAT-E-RTR-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Create the required environment around a model
                                          - Apply materials, textures, and 3D textures to your models
                                          - Use different types of lights and cameras to create the desired ambience

     Participants' Profile
                                          Industrial Stylists and Designers

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          - Introduction
                                          - Environment management
                                          - Camera management
                                          - Light sources management
                                          - DMU integration
                                          - Textures management
                                          - Stickers management
                                          - Animation: Turntable management
                                          - Animation: Animating scene elements

     Exercises
                                          Ex. 1: Defining an Environment (5min) / Automotive
                                          Ex. 2: Defining the Camera (10min) / All sectors
                                          Ex. 3: Defining the Light Source (10min) / Automotive
                                          Ex. 4: Applying Texture (40min) / Automotive
                                          Ex. 5: Applying Stickers (10min) / Automotive
                                          Ex. 6: Creating an Animation Using a Turntable (15min) / Automotive
                                          Ex. 7: Creating an Animation of Scene (15min) / Automotive




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008       35/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         V4A: V4/V5 Advanced Interoperability
                       Solutions

     Course Code                          EDU-CAT-E-V4A-A
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Advanced
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V4A-AI-V5R18
                                          Foils: EDU-CAT-E-V4A-AF-V5R18
                                          Exercises: EDU-CAT-E-V4A-AX-V5R18

     Objectives
                                          In this course, you will learn advanced interoperability concepts about the
                                          migration of CATIA V4 geometric/application data to CATIA V5. You will also
                                          learn how V5 data can be saved in CATIA V4 formats or used directly in CATIA
                                          V4.

     Participants' Profile
                                          Experienced CATIA V4/V5 users

     Prerequisites
                                          Basic knowledge of CATIA V5 Mechanical Design Solutions

     Content
                                          - From V4 to V5
                                            - Transfer of V4 geometric data to V5
                                            - Transfer of V4 application data to V5
                                          - From V5 to V4
                                            - Using V5 data in V4
                                            - Saving V5 data in V4 formats

     Exercises
                                          Ex. 1: Smart/Unsmart Solid (15min) / All sectors
                                          Ex. 2: Error during update (15min) / All sectors
                                          Ex. 3: Migration of kinematics data (25min) / All sectors
                                          Ex. 4: Sheet Metal Design (10min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008   36/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         V4I: V4 Integration
                       Solutions

     Course Code                          EDU-CAT-E-V4I-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V4I-FI-V5R18
                                          Foils: EDU-CAT-E-V4I-FF-V5R18
                                          Exercises: EDU-CAT-E-V4I-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-V4I-FS-V5R18
                                          Demonstration: EDU-CAT-E-V4I-FD-V5R18

     Objectives
                                          At the end of this course, participants will be able to:
                                          - Use CATIA V4 data in CATIA V5
                                          - Transfer a CATIA V4 solid into a CATIA V5 CATPart
                                          - Manage the links between CATIA V4 and CATIA V5 documents

     Participants' Profile
                                          CATIA V5 users

     Prerequisites
                                          Basic knowledge of CATIA V5 Mechanical Design Solutions

     Content
                                          - Introduction to V4 Integration
                                          - Creating a CATProduct using V4 data
                                          - Assembly of V4 data in a V5 CATProduct
                                          - Transferring V4 data into V5 CATPart
                                          - Design in context
                                          - Drawing of a V4/V5 document in V5
                                          - Migration of 2D Draw elements and Views
                                          - CATIA V5 DMU solutions and V4 data
                                          - Links between V4 data and V5 documents

     Exercises
                                          Ex. 1: Recap Exercise 1 : open and check the V4 geometry (20min) / All
                                          sectors
                                          Ex. 2: Recap Exercise 2 : Solid translation (15min) / All sectors
                                          Ex. 3: Recap Exercise 3 : manipulations in a CATProduct (20min) / All sectors
                                          Ex. 4: Welding Gun : Creating a CATProduct with V4 data (10min) / All sectors
                                          Ex. 5: Welding Gun : Assembly of V4 data in a V5 CATProduct (15min) / All
                                          sectors
                                          Ex. 6: Welding Gun : Copy/Pasting a V4 solid in a V5 CATPart (20min) / All
                                          sectors
                                          Ex. 7: Welding Gun : Design in context (20min) / All sectors
                                          Ex. 8: Welding Gun : Generative drafting (20min) / All sectors
                                          Ex. 9: Welding Gun : DMU Space Analysis (20min) / All sectors
                                          Ex. 10: Welding Gun : V4 Modification and Update in V5 (20min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      37/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                     Infrastructure         VBA: CATIA V5 Automation
                       Solutions

     Course Code                          EDU-CAT-E-VBA-F
     Brand & Release                      CATIA V5R18
     Duration                             4 days
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Foils: EDU-CAT-E-VBA-FF-V5R18
                                          Instructor Foils: EDU-CAT-E-VBA-FI-V5R18
                                          Exercises: EDU-CAT-E-VBA-FX-V5R18

     Objectives
                                          At the end of this course, participants will have a good understanding of the
                                          different ways to automate tasks related to CATIA V5: CATIA Macros and
                                          Visual Basic Programming.

     Participants' Profile
                                          CATIA V5 Applications developers; bench markers

     Prerequisites
                                          CATIA V5 Fundamentals.
                                          Visual Basic Editor on PC NT
                                          Minimum knowledge or exposure to Microsoft Visual Basic (cf. book ref.
                                          Microsoft Visual Basic 6.0 Learning Edition)
                                          JavaScript is a plus

     Content
                                          - CATIA V5 OLE Automation, Journaling & Scripting Architecture
                                          - Exported objects of CATIA V5
                                          - Designing panels for Macros
                                          - Graphic selection of objects
                                          - Settings - V5 Administration
                                          - Communication with another Automation server.

     Exercises
                                          Ex. 1: Cylinders (Master Exercise) (10min) / All sectors
                                          Ex. 2: Modifying the viewpoint of an existing document (30min) / All sectors
                                          Ex. 3: Creating 2D sketch with constraints (15min) / All sectors
                                          Ex. 4: Creating part design features (30min) / All sectors
                                          Ex. 5: Creating 3D wireframes and 3D surfaces (30min) / All sectors
                                          Ex. 6: Titanic (30min) / All sectors
                                          Ex. 7: Drafting the bolt (30min) / All sectors
                                          Ex. 8: Test Selections (30min) / All sectors
                                          Ex. 9: Select Element (30min) / All sectors
                                          Ex. 10: Get Point (30min) / All sectors
                                          Ex. 11: Settings - Applying local changes (20min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008       38/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                                                             CATIA Course Material

                                                                 Mechanical Design Solutions




www.cadfamily.com contact:cadserv21@hotmail.com
                              CATIA V5R18 Course Catalog                                    Mar 11, 2008   39/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         ASL: Aerospace Sheet Metal Design
                      Solutions

     Course Code                          EDU-CAT-E-ASL-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-ASL-FI-V5R18
                                          Foils: EDU-CAT-E-ASL-FF-V5R18
                                          Exercises: EDU-CAT-E-ASL-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-ASL-FS-V5R18

     Objectives
                                          In this course, you will learn how to generate sheet metal parts for aerospace

     Participants' Profile
                                          Aerospace Airframe Designer

     Prerequisites
                                          Part Design, Assembly Design, Wireframe and Surface Design


     Content
                                          - Introduction to Aerospace Sheet Metal Design
                                          - ASL Parameters
                                          - Creating the Web
                                          - Creating a Surfacic Flange
                                          - Creating a Joggle
                                          - Creating Flanges
                                          - Creating a Corner Relief
                                          - Creating a Cut Out
                                          - Creating Stamps
                                            - Flanged Hole
                                            - Bead
                                            - Circular Stamp
                                            - Surface Stamp
                                            - Flanged Cutout
                                            - Stiffening Rib
                                            - Curve Stamp
                                            - User Stamp
                                          - Creating a Hole
                                          - Points or Curves Mapping
                                          - Creating Corners or Chamfers
                                          - Applying a Pattern
                                          - Modifying a Feature
                                          - Generating Folded and Flattened Parts
                                          - Drawing Generation

     Exercises
                                          Ex. 1: Fighter Airframe (50min) / All sectors
                                          Ex. 2: Aero Structure (30min) / All sectors
                                          Ex. 3: Bracket (15min) / All sectors
                                          Ex. 4: Fighter Web Structure (20min) / All sectors
                                          Ex. 5: Rib (20min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008       40/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         ASM: CATIA Product Design Expert
                      Solutions

     Course Code                          EDU-CAT-E-ASM-A
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Advanced
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-ASM-AI-V5R18
                                          Foils: EDU-CAT-E-ASM-AF-V5R18
                                          Exercises: EDU-CAT-E-ASM-AX-V5R18

     Objectives
                                          Upon completion of this course, you will be able to:
                                          -Modify CATIA options in order to optimize performance for large, complex
                                          designs
                                          -Manage contextual links between product documents by using publications
                                          -create and use parameters to drive a product design
                                          Create sections to visualize internal product structure
                                          -Create scenes and explodes views
                                          -Generate annotations and bills of material for assembly drawings

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          Students attending this course should have the knowledge of CATIA Product
                                          Design, CATIA Part Design.

     Content
                                          This course will teach you collaborative engineering methods with which you
                                          can design parts in the context of a complex product structure. You will learn
                                          how to optimize performance for large and complex designs, and how to
                                          generate annotations and bills of material for assembly drawings.

                                          - Managing a Product Structure
                                          - Designing & Managing Contextual Parts
                                          - Creating and Using Published Geometry
                                          - Flexible Sub-Assembly
                                          - Working with Large Assemblies
                                          - Analyzing Assemblies to Prepare drawing

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008       41/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         CCV: Core & Cavity Design
                      Solutions

     Course Code                          EDU-CAT-E-CCV-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Foils: EDU-CAT-E-CCV-FF-V5R18
                                          Exercises: EDU-CAT-E-CCV-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-CCV-FS-V5R18

     Objectives
                                          Upon completion of the course you will be able to:
                                          - Import the part to a mold
                                          - Define the main pulling direction
                                          - Update mold areas by transferring, splitting and segregating faces
                                          - Create a parting surface
                                          - Use functionalities dedicated to stamping
                                          - Perform a geometric comparison of two parts

     Participants' Profile
                                          Surface designers in tooling domain

     Prerequisites
                                          V5F-F: CATIA V5 Fundamentals

     Content
                                          - Import the Part to mold
                                          - Define the Main Pulling Direction
                                          - Define a Slider/Lifter Pulling Direction
                                          - Work on Mold Areas : Transfer, Aggregate, Split, Explode, Bounding Box
                                          - Define Parting Surface


     Exercises
                                          Ex. 1: Pan Handle (60min) / All sectors
                                          Ex. 2: Support (30min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      42/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         DDR: CATIA Detail Drafting
                      Solutions

     Course Code                          EDU-CAT-E-DDR-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-DDR-FI-V5R18
                                          Foils: EDU-CAT-E-DDR-FF-V5R18
                                          Exercises: EDU-CAT-E-DDR-FX-V5R18

     Objectives
                                          Upon completion of this course, you will be able to:
                                          -Create an interactive view and draw a sketch on it
                                          -Insert annotations to dress-up the views
                                          -Use advanced dimensioning tools
                                          You will also be introduced to the 2D-3D links management and to the drafting
                                          workbench customization

     Participants' Profile
                                          Draftsmen

     Prerequisites
                                          Students attending this course should be familiar with the basics of 2D views
                                          creation in CATIA V5


     Content
                                          - Introduction to drafting workbench
                                          - Creating Interactive Views
                                          - Dressing up the Layout
                                          - View and Sheet Management
                                          - Customizing the Drafting Workbench
                                          - Master Exercise

     What is new in this release
                                          This course has been reworked to focus on the interactive creation and dress
                                          up of views. It includes useful recommendations and introduces to the use of
                                          2D components from catalogs.

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      43/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         DRA: Advanced Drafting & Customization
                      Solutions

     Course Code                          EDU-CAT-E-DRA-A
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Advanced
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-DRA-AI-V5R18
                                          Foils: EDU-CAT-E-DRA-AF-V5R18
                                          Exercises: EDU-CAT-E-DRA-AX-V5R18

     Objectives
                                          Upon completion of this course you will be able to set and manage all
                                          dimension and annotation standards contained in the standard files according
                                          to company or projects needs.

     Participants' Profile
                                          Draftsmen, Drafting Administrators

     Prerequisites
                                          CATIA V5 Mechanical Design Fundamentals, knowledge of VB scripting

     Content
                                          During this 2-day session you will see
                                          -Hints & Tips on Interactive Drafting
                                          -Hints & Tips on Generative Drafting
                                          -Drawing Generation of large assemblies
                                          -Administration tasks
                                          -Increasing Productivity
                                          -Creating Frames & Title Blocks with a macro



     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008      44/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         FMP: Functional Molded Part
                      Solutions

     Course Code                          EDU-CAT-E-FMP-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-FMP-FI-V5R18
                                          Foils: EDU-CAT-E-FMP-FF-V5R18
                                          Exercises: EDU-CAT-E-FMP-FX-V5R18

     Objectives
                                          Upon Completion of this course you will be able to:
                                          - Define the main shapes of a molded part as added or removed material
                                          - Add functional features such as ribs or cutouts to the part
                                          - Finalize the molded part using the feature modifiers such as fillets or patterns
                                          - Use the multi-body approach
                                          - Extract cores and cavities from the final part

     Participants' Profile
                                          Mold Designers

     Prerequisites
                                          Students attending      this   course   should    be   familiar   with   CATIA   V5
                                          Fundamentals.

     Content
                                          This course will teach you how to use the Functional Molded Part workbench to
                                          create molded parts from the main shapes definition and to finalize the part
                                          with additional dress up features. You will also be taught the multi-body
                                          approach and will finally learn how to extract cores and cavity from the final
                                          part.

                                          - Basics of functional Molded Parts
                                          - Basic Features
                                          - Functional Features
                                          - Feature Modifiers and Dress-Up Tools
                                          - Multi-Body Features
                                          - Extraction Features

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                            Mar 11, 2008       45/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         FR1: Part Design Feature Recognition
                      Solutions

     Course Code                          EDU-CAT-E-FR1-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-FR1-FI-V5R18
                                          Foils: EDU-CAT-E-FR1-FF-V5R18
                                          Exercises: EDU-CAT-E-FR1-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Build comprehensive V5 data structures for solids whose specifications are
                                          lost or unreachable
                                          - Build data structure for solids that have been imported from other CAD
                                          systems

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          Students attending this course should have knowledge of CATIA V5
                                          Fundamentals and CATIA Part Design.

     Content
                                          Feature Recognition: Introduction
                                          Performing Feature Recognition
                                          Master Exercise
                                          To Sum Up

     Exercises
                                          Ex. 1: Creating V5 geometry from an isolated solid (30min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008          46/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         FTA: 3D Functional Tolerancing & Annotation
                      Solutions

     Course Code                          EDU-CAT-E-FTA-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-FTA-FI-V5R18
                                          Foils: EDU-CAT-E-FTA-FF-V5R18
                                          Exercises: EDU-CAT-E-FTA-FX-V5R18

     Objectives
                                          Upon Completion of this course you will be able to:
                                          - Add 3D annotations to a part
                                          - Manage and position these annotations
                                          - Create and manage annotation planes and views
                                          - Manage the 3D geometry associated to the 3D annotations

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          Students attending this course should be familiar with the basics of solids and
                                          surfaces creation and also with the basics of knowledge

     Content
                                          This course will teach you how to create annotation planes in a CATPart and
                                          how to add and manage 3D annotations on these planes. You will also learn
                                          how to create 3D views in the CATPart and how to use them to create 2D
                                          views in a CATDrawing.

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008      47/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         GS1: CATIA Surface Design
                      Solutions

     Course Code                          EDU-CAT-E-GS1-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-GS1-FI-V5R18
                                          Foils: EDU-CAT-E-GS1-FF-V5R18
                                          Exercises: EDU-CAT-E-GS1-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Identify and use the tools specific to the Generative Shape Design workbench
                                          - Create simple reference and Wireframe geometry
                                          - Use the reference wireframe elements to create simple surfaces
                                          - Create clean topology from a set of surfaces and smooth sharp edges
                                          - Detect and correct the discontinuities on curves and surfaces
                                          - Create solids from surfaces

     Participants' Profile
                                          Mechanical Surface Designers

     Prerequisites
                                          Students attending this course should be familiar with the CATIA V5 interface

     Content
                                          This course introduces you to the Generative Shape Design interface and
                                          basic tools.
                                          You will be taught wireframe and surface creation and you will familiarize
                                          yourself with the hybrid design.
                                          This course focus on the Generative Shape Design tools that are available with
                                          a MD2 license.

                                          - Introduction to Surface Design
                                          - Creating Wireframe Geometry
                                          - Shape Design Common Tools
                                          - Creating Surfaces
                                          - Performing Operations on the Geometry
                                          - Completing the Geometry in Part Design
                                          - Modifying the Geometry
                                          - Using Tools
                                          -Master Exercice: Mobile Phone

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008       48/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         HA1: Healing Assistant
                      Solutions

     Course Code                          EDU-CAT-E-HA1-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-HA1-FI-V5R18
                                          Foils: EDU-CAT-E-HA1-FF-V5R18
                                          Exercises: EDU-CAT-E-HA1-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Analyze the imported data
                                          - Repair the imported data
                                          - Compare two versions of a Part
                                          - Customize the workbench

     Participants' Profile
                                          All designers, especially in the tooling design domain

     Prerequisites
                                          GS1-F-V5R16: CATIA Surface Design

     Content
                                           - Introduction to Healing Assistant
                                           - Master Exercise Presentation
                                           - Model Analysis
                                           - Master Exercise Step 1: Topological Analysis
                                           - Closing a Join Surface
                                           - Master Exercise Step 2: Topological Healing
                                           - Comparing Models
                                           - Customizing the Workbench


     Exercises
                                          Ex. 1: Lateral Fender (master exercise) (60min) / All sectors
                                          Ex. 2: Compare exercise: Lateral fender (30min) / All sectors
                                          Ex. 3: Additional exercise (Handle) (45min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008   49/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         LO1: 2D Layout for 3D Design
                      Solutions

     Course Code                          EDU-CAT-E-LO1-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-LO1-FI-V5R18
                                          Foils: EDU-CAT-E-LO1-FF-V5R18
                                          Exercises: EDU-CAT-E-LO1-FX-V5R18

     Objectives
                                          In this course you will learn how to draw benefit from 2D & 3D available in a
                                          single environment to design 3D products.

     Participants' Profile
                                          CATIA V5 users

     Prerequisites
                                          Drafting
                                          Part Design
                                          Assembly Design

     Content
                                          1- Introduction
                                            Accessing the Workbench
                                            User Interface
                                            General Presentation
                                            User Settings
                                            Standards
                                          2- Geometry Creation
                                            Creating Projection Views
                                            Exporting the 2D View to 2D Layout
                                            Using 2D Components
                                            3D Visualization and Use-Edges Capabilities
                                            Managing the Background Visualization
                                            Dressing-up the Geometry
                                            Creating 3D geometry from 2D geometry
                                          3- Data Management
                                            Print Capabilities
                                            Drawing Creation from 2D Layout

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      50/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         MD2: Mechanical Design V5R18 Update
                      Solutions

     Course Code                          EDU-CAT-E-MD2-U
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Update
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-MD2-UI-V5R18
                                          Foils: EDU-CAT-E-MD2-UF-V5R18

     Objectives
                                          Upon completion of this course you will be able to use the new and enhanced
                                          tools of the Mechanical Design Workbenches in V5R18 Release.

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          Students attending this course should have knowledge of CATIA Mechanical
                                          Design V5R17

     Content
                                          This course will teach you the principal new tools available in CATIA V5R18
                                          Mechanical Design. You will be taught the new options for variable radius
                                          creation. You will also learn how to create symmetric set in products, how to
                                          use tolerant modeling while creating blends. In the drafting workbench, you will
                                          see how to create new 2D and 3D clipping views or how to customize symbols.

                                          - Sketcher Updates
                                          - Part Design Updates
                                          - Assembly Design Updates
                                          - Generative Shape Design.

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      51/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         MTD: Mold Tooling Design
                      Solutions

     Course Code                          EDU-CAT-E-MTD-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-MTD-FI-V5R18
                                          Foils: EDU-CAT-E-MTD-FF-V5R18
                                          Exercises: EDU-CAT-E-MTD-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-MTD-FS-V5R18

     Objectives
                                          Upon Completion of this course you will be able to:
                                          - Create the mold base having guided and fixed components using Mold
                                          Tooling Design workbench
                                          - Build the complete assembly of a Plastic Injection Mold.

     Participants' Profile
                                          New Mold Tooling Design users

     Prerequisites
                                          Students attending this course should have knowledge of CATIA V5
                                          Fundamentals and TG1 Tooling Design Fundamentals

     Content
                                          Introduction to Mold Tooling Design
                                          Creating a New Mold
                                          Editing the Mold Base
                                          Working with Mold Components
                                          Mold Design to Manufacturing
                                          Creating Injection Features
                                          Additional Information

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   52/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         PDG: CATIA Part Design Expert
                      Solutions

     Course Code                          EDU-CAT-E-PDG-A
     Brand & Release                      CATIA V5R18
     Duration                             1.5 days
     Language                             English
     Level                                Advanced
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-PDG-AI-V5R18
                                          Foils: EDU-CAT-E-PDG-AF-V5R18
                                          Exercises: EDU-CAT-E-PDG-AX-V5R18

     Objectives
                                          Upon completion of this course, you will be able to:
                                          -Use 3D reference Elements to create a part
                                          -Create advanced Sketch-Based Features
                                          -Apply Advanced Dress-Up Features
                                          -Design using Boolean operations
                                          -Share Designs by working in Multi-Model environment
                                          -Analyse Parts
                                          -Annotate Parts for review

     Participants' Profile
                                          CATIA V5 Mechanical Designers.

     Prerequisites
                                          Students attending this course should have the knowledge of CATIA V5
                                          Fundamentals, Getting started with CATIA V5, Sketcher, Part Design
                                          Fundamentals

     Content
                                          This course will teach you to design ‘Complex’ 3D mechanical parts from
                                          sketches in context of an assembly. You will build upon the knowledge gained
                                          in the Part Design Course and will be equiped to use ‘Advanced’ features
                                          offered by the Part Design workbench.

                                          - Using 3D Elements to Create a Part
                                          - Sketch-Based Features
                                          - Part Manipulations
                                          - Dress-Up Features
                                          - Part Analysis
                                          - Annotations

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008      53/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         SMD: CATIA Generative Sheetmetal Design
                      Solutions

     Course Code                          EDU-CAT-E-SMD-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-SMD-FI-V5R18
                                          Foils: EDU-CAT-E-SMD-FF-V5R18
                                          Exercises: EDU-CAT-E-SMD-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-SMD-FS-V5R18

     Objectives
                                          Understand the terminology and the creation process for sheet metal part
                                          design
                                          Define and manage sheet metal part parameters
                                          Design walls, bends and flanges
                                          - Add features such as cutouts, holes, corners and chamfers
                                          - Create standard and user defined stamped features
                                          - Manage folded and unfolded views and export a finished flat pattern

     Participants' Profile
                                          Mechanical Designers, Sheetmetal Designers

     Prerequisites
                                          CATIA V5 Fundamentals.




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   54/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Content
                                          This course will teach you how to design a sheet metal part using associative
                                          feature-based modeling. Standard and user defined stamped features can be
                                          integrated into the design and the resulting flat pattern is calculated in
                                          accordance with standard bend allowances or with company specific bend
                                          allowance tables.

                                          Getting Started
                                          - Introduction to Sheet Metal Design
                                          - Generative Sheet Metal Design Overview
                                          - Defining Sheet Metal Parameters
                                          - Recommendations for Getting Started

                                          Sheet Metal Walls
                                          - What is a Sheet Metal Wall?
                                          - Defining the First Wall
                                          - Secondary Walls
                                          - Part Recognition
                                          - Recommendations for Sheet Metal Walls

                                          Bends and Unfolded Mode
                                          - Bends
                                          - Unfolded Mode
                                          - Corner Relief
                                          - Recommendations for Bends

                                          Flanges
                                          - Creating Flanges
                                          - Recommendations for Flanges

                                          Sheet Metal Features
                                          - Cutouts
                                          - Holes
                                          - Corners and Chamfers
                                          - Standard Stamps
                                          - User-Defined Stamps
                                          - Recommendations for Sheet Metal Features

                                          Transformations and Duplication
                                          - Transformation of Parts
                                          - Patterns
                                          - Mirror
                                          - PowerCopies
                                          - Recommendations for Duplication

                                          Mapping and Output
                                          - Point or Curve Mapping
                                          - Output

                                          Advanced Topics in Sheet Metal
                                          - Sheet Metal Standard Files
                                          - Multi-Body Methodology

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      55/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         SMD: CATIA Generative Sheet Metal Design V5R18
                      Solutions
                                            Update
     Course Code                          EDU-CAT-E-SMD-U
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Update
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-SMD-UI-V5R18
                                          Foils: EDU-CAT-E-SMD-UF-V5R18

     Objectives
                                          Upon completion of this course you will be able to use the new and enhanced
                                          capabilities of Generative Sheetmetal Design Workbench in V5R18 release.

     Participants' Profile
                                          Mechanical Designers

     Prerequisites
                                          Students attending this course must have knowledge of CATIA Generative
                                          Sheetmetal Design V5R17.

     Content
                                          -Enhancements in Wall
                                          -Enhancements in Extrusion
                                          -Enhancements in Hopper
                                          -Transformation of Parts
                                          -Enhancements in Local Unfolding

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008     56/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         SR1: Structure Design
                      Solutions

     Course Code                          EDU-CAT-E-SR1-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-SR1-FI-V5R18
                                          Foils: EDU-CAT-E-SR1-FF-V5R18
                                          Exercises: EDU-CAT-E-SR1-FX-V5R18
                                          Additional Information: EDU-CAT-E-SR1-FO-V5R18

     Objectives
                                          In this course you will learn methods to quickly create and modify linear and
                                          curved structures, and plates using standard or user-defined sections. It
                                          addresses any kind of Frames, Foundations and Steel construction …, in
                                          various domains like Aerospace, Automotive and F&A.

     Participants' Profile
                                          New CATIA V5 users

     Prerequisites
                                          COM, WFS, PDG




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      57/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Content
                                          1.Introduction to Structure Designp6
                                           Accessing the Workbench         p7
                                           Exploring the User Interfacep8
                                           Terminologyp9
                                          2.Options & Project Resources Managementp10
                                           Setting Structure Design Optionsp11
                                           Setting Part Design Options       p12
                                           Setting Assembly Design Optionsp14
                                           Selecting a Projectp15
                                          3.Creating Skeletonsp17
                                           What about Skeletons?p18
                                           Creating Grids in 3Dp19
                                          4.Defining and Creating Shapes & Platesp22
                                           What about Shapes?          p23
                                                 Generating Piece Parts      p24
                                                 Defining & Placing Shapes…       p26
                                           Defining Material & Gradep27
                                           Defining Section          p28
                                           Defining Shape Anchor Point        p29
                                           Defining Shape Orientation       p30
                                           Placing Shapes Using Points        p31
                                           Placing Shapes on Support        p34
                                           Creating Plates & End-Platesp36
                                           Creating Small Assemblies        p42
                                          5.Modifying Shapes & Platesp44
                                           Modifying Shapes & Plates Definition      p45
                                           Extending and Stretching Shapesp47
                                           Splitting and Merging Shapes & Platesp48
                                           Nibbling/Coping Shapes ans Platesp49
                                           Defining Cutbacks        p51
                                           Removing Cutbacks          p57
                                           Placing Cutoutsp58
                                           Modifying Cutouts        p63
                                           Removing Cutouts         p64
                                           Placing End Cuts        p65
                                           Modifying and Removing End Cuts         p69
                                           Placing Slotsp70
                                           Modifying Slotsp74
                                           Removing Slotsp75

     Exercises
                                          Ex. 1: Select your project and options (15min) / All sectors
                                          Ex. 2: External Turret: Panel System (45min) / All sectors
                                          Ex. 3: External Turret: Jacket System (30min) / All sectors
                                          Ex. 4: External Turret: Floor System (30min) / All sectors
                                          Ex. 5: External Turret: Detailing (90min) / All sectors
                                          Ex. 6: External Turret: Modifications (15min) / All sectors
                                          Ex. 7: External Turret: Secondary Structures (30min) / All sectors
                                          Ex. 8: Piece Part Generation (30min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008    58/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         SRA: Structure Design Administration
                      Solutions

     Course Code                          EDU-CAT-E-SRA-A
     Brand & Release                      CATIA V5R18
     Duration                             4 days
     Language                             English
     Level                                Advanced
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-SRA-AI-V5R18
                                          Foils: EDU-CAT-E-SRA-AF-V5R18
                                          Exercises: EDU-CAT-E-SRA-AX-V5R18
                                          Additional Information: EDU-CAT-E-SRA-AO-V5R18

     Objectives
                                          In this course you will learn methods to:
                                          - administrate a SR1 project.
                                          - Create or modify a Section Catalog
                                          - Create End-Cuts, Slots and Small Assmblies

     Participants' Profile
                                          Experienced CATIA V5 users

     Prerequisites
                                          COM, WFS, PDG, SR1, PKT, KWA (Optional)

     Content
                                          1. Project Resource Managementp5
                                             Introducing the PRMp6
                                             Understanding the PRMp7
                                             Structure Discipline Resourcesp11
                                             Accessing & Checking the PRM           p15
                                          2. Feature Dictionaryp16
                                             About the Feature Dictionaryp17
                                             Starting the Feature Dictionary Editorp18
                                             Managing Attributes p19
                                             Discrete Valuesp21
                                             Managing ID Numberp22
                                          3. Standard Section Catalogsp24
                                             Managing Parametric Sectionsp25
                                             Generating Resolved Partsp30
                                             Creating/Modifying Standard Section Catalogsp32
                                             Creating/Modifying the StructureSpecificationMaterial Catalogsp34
                                          4. Detailing Featuresp41
                                             Design Rules and Recommendationsp42
                                             End-Cutsp45
                                             Slotsp51
                                             Small Assembliesp54
                                             Storing Detailing Features in a catalogp57

     Exercises
                                          Ex. 1: Creating a New Project (180min) / All sectors
                                          Ex. 2: Adding New Attributes (180min) / All sectors
                                          Ex. 3: Creating a Resolved Standard section (240min) / All sectors
                                          Ex. 4: Modifying the StructureSpecifiactionMaterial Catalog (240min) / All
                                          sectors
                                          Ex. 5: Creating a Standard End-Cut (180min) / All sectors
                                          Ex. 6: Creating a Contextual End-Cut (180min) / All sectors
                                          Ex. 7: Creating a Slot (180min) / All sectors
                                          Ex. 8: Creating a Small Assembly (180min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008        59/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         TG1: Tooling Design
                      Solutions

     Course Code                          EDU-CAT-E-TG1-F
     Brand & Release                      CATIA V5R18
     Duration                             1.5 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Foils: EDU-CAT-E-TG1-FF-V5R18
                                          Exercises: EDU-CAT-E-TG1-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-TG1-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          Create the die and mold components using Mold Tool Design workbench.
                                          Instantiate the components in a die or mold structure.

     Participants' Profile
                                          New Tooling Design users

     Prerequisites
                                          Students attending this course should have experience in the following
                                          domain(s): CATIA V5 Fundamentals

     Content
                                          Introduction to Tooling Design
                                          Creating Components
                                          Editing Components
                                          Specific Components : Inserts & Sliders
                                          Advanced Add/Remove Capabilities
                                          Managing User Components
                                          Tool Design to Manufacturing




     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   60/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         V5E: CATIA V5 Mechanical Design Expert
                      Solutions

     Course Code                          EDU-CAT-E-V5E-A
     Brand & Release                      CATIA V5R18
     Duration                             5 days
     Language                             English
     Level                                Advanced
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V5E-AI-V5R18
                                          Foils: EDU-CAT-E-V5E-AF-V5R18

     Objectives
                                          - Create a complex model in CATIA V5
                                          - Create and manage a structured model
                                          - Design parts in the context of an assembly
                                          - Re-use existing data to complete assemblies
                                          - Manage relationships between assembled parts
                                          - Analyze and annotate your design

     Participants' Profile
                                          Mechanical designers already having an experience of CATIA V5 mechanical
                                          design foundations.

     Prerequisites
                                          Students attending this course should have knowledge of CATIA V5
                                          Fundamentals

     Content
                                          This course will teach you how to start a complex design project from its
                                          specifications (top down approach) and complete it by reusing existing data. It
                                          will focus on advanced skills and concepts that enable you to create and
                                          analyze complex parts and assemblies.

                                          Lesson 1: Introduction
                                          Lesson 2: Design Complex Parts
                                          Lesson 3: Surface Design
                                          Lesson 4: Analyze and Annotate Parts
                                          Lesson 5: Sharing Information
                                          Lesson 6: Assembly Design
                                          Lesson 7: Design in Context
                                          Lesson 8: Complex Assembly Design
                                          Master Project 1: Mobile Phone
                                          Master Project 2: Lifting Truck

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008      61/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         V5F: CATIA V5 Fundamentals
                      Solutions

     Course Code                          EDU-CAT-E-V5F-F
     Brand & Release                      CATIA V5R18
     Duration                             5 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V5F-FI-V5R18
                                          Foils: EDU-CAT-E-V5F-FF-V5R18

     Objectives
                                          Understand the CATIA V5 interface
                                          Plan the construction of a part in order to properly convey its visual and
                                          functional aspects
                                          Create simple parts in CATIA V5
                                          Understand how to manage parts in the context of an assembly
                                          Produce simple drawings and assembly layouts

     Participants' Profile
                                          New CATIA V5 Mechanical Designers

     Prerequisites
                                          Mechanical design experience.
                                          Experience with the Windows operating system.

     Content
                                          This course will introduce you to CATIA V5. It will teach you how to build
                                          simple parts and assemblies in CATIA, and how to make simple drawings of
                                          those parts and assemblies.

                                          - Lesson 1: Introduction to CATIA

                                          - Lesson 2: Profile Creation

                                          - Lesson 3: Basic Features

                                          - Lesson 4: Additional Features

                                          - Lesson 5: Dress-Up Features

                                          - Lesson 6: Reusing Data

                                          - Lesson 7: Finalizing Design Intent

                                          - Lesson 8: Assembly Design

                                          - Lesson 9: Design in Context

                                          - Lesson 10: Drafting ISO

                                          - Lesson 10: Drafting ANSI

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008    62/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         V5VB: V5 Automotive - Fundamental Course for Body
                      Solutions
                                            Designers
     Course Code                          EDU-CAT-E-V5VB-F
     Brand & Release                      CATIA V5R18
     Duration                             7 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V5VB-FI-V5R18
                                          Foils: EDU-CAT-E-V5VB-FF-V5R18

     Objectives
                                          This course will introduce the fundamental concepts that are required to build
                                          simple automotive parts and assemblies in CATIA V5, and teaches how to
                                          make simple drawings of those parts and assemblies. It will introduce you to
                                          the correct surface modeling methodology necessary for body or chassis
                                          design.

                                          At the end of the course students will be able to:
                                          - Understand the CATIA V5 interface
                                          - Plan the construction of an automotive part in order to properly convey its
                                          visual and functional aspects
                                          - Create simple automotive parts in CATIA V5
                                          - Use correct surface modeling methodology for body or chassis design
                                          - Understand how to design and manage parts in the context of an assembly
                                          - Produce simple drawings and assembly layouts


     Participants' Profile
                                          Automotive Chassis or Body Designers

     Prerequisites
                                          None

     Content
                                          This course is made up of 12 lessons.

                                          -Lesson 1: Introduction to CATIA
                                          -Lesson 2: Profile Creation
                                          -Lesson 3: Basic Features
                                          -Lesson 4: Additional Features
                                          -Lesson 5: Dress-Up Features
                                          -Lesson 6: Reusing Data
                                          -Lesson 7: Create Simple Surface
                                          -Lesson 8: Create Complex Surfaces
                                          -Lesson 9: Surface Modification Tools
                                          -Lesson 10: Assembly Design
                                          -Lesson 11: Designing in Context
                                          -Lesson 12: Drafting (ISO)

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008       63/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         V5VC: V5 Automotive - Fundamental Course for
                      Solutions
                                            Chassis Designers
     Course Code                          EDU-CAT-E-V5VC-F
     Brand & Release                      CATIA V5R18
     Duration                             7 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          None

     Objectives
                                          This course will introduce the fundamental concepts that are required to build
                                          simple automotive parts and assemblies in CATIA V5, and teaches how to
                                          make simple drawings of those parts and assemblies. It will introduce you to
                                          the correct surface modeling methodology necessary for body or chassis
                                          design.

                                          At the end of the course students will be able to:
                                          - Understand the CATIA V5 interface
                                          - Plan the construction of an automotive part in order to properly convey its
                                          visual and functional aspects
                                          - Create simple automotive parts in CATIA V5
                                          - Use correct surface modeling methodology for body or chassis design
                                          - Understand how to design and manage parts in the context of an assembly
                                          - Produce simple drawings and assembly layouts


     Participants' Profile
                                          Automotive Chassis or Body Designers

     Prerequisites
                                          None

     Content
                                          This course is made up of 12 lessons.

                                          Lessons 1- 6: Introduction to basic modeling in CATIA V5
                                          Lessons 7 - 9: Surface Modeling for Chassis / Body Design
                                          Lessons 10 - 11: Assembly Design
                                          Lessons 12: Drafting
                                          Maste Project

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008       64/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         V5VP: V5 Automotive - Fundamental Course for
                      Solutions
                                            Powertrain Designers
     Course Code                          EDU-CAT-E-V5VP-F
     Brand & Release                      CATIA V5R18
     Duration                             7 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          None

     Objectives
                                          This course will introduce the fundamental concepts that are required to build
                                          simple automotive parts and assemblies in CATIA V5, and teaches how to
                                          make simple drawings of those parts and assemblies. It will introduce you to
                                          the advanced solid modeling techniques necessary for Powertrain design
                                          methodology.

     Content
                                          This course is made up of 12 lessons:
                                          Lessons 1 - 6:Introduction to basic Solid Modeling
                                          Lessons 7 - 9: Complex Solid Modeling
                                          Lessons 10 - 11: Assembly Design
                                          Lesson 12: Drafting
                                          Master Project

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008     65/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                  Mechanical Design         WD1: Weld Design
                      Solutions

     Course Code                          EDU-CAT-E-WD1-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-WD1-FI-V5R18
                                          Foils: EDU-CAT-E-WD1-FF-V5R18
                                          Exercises: EDU-CAT-E-WD1-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to
                                          - Weld parts,
                                          - Generate Weld reports,
                                          - Extract 2D views from 3D welds.

     Participants' Profile
                                          Mechanical and Structural Designers

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          - Workbench presentation
                                          - Weld creation
                                          - Weld edition
                                          - Weld report and drawing

                                          Complete industrial exercice

     Exercises
                                          Ex. 1: Welding / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008   66/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                                                             CATIA Course Material

                                                                                   Machining Solutions




www.cadfamily.com contact:cadserv21@hotmail.com
                              CATIA V5R18 Course Catalog                                    Mar 11, 2008   67/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            AMG: Advanced Part Machining
                       Solutions

     Course Code                          EDU-CAT-E-AMG-F
     Brand & Release                      CATIA V5R18
     Duration                             1.5 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-AMG-FI-V5R18
                                          Foils: EDU-CAT-E-AMG-FF-V5R18
                                          Exercises: EDU-CAT-E-AMG-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Identify and use the Advance Part Machining workbench tools
                                          - Define a Multi-Axis Flank Contouring operation
                                          - Define a Multi-Axis Helix Machining operation
                                           Define a Cavities Roughing operation

     Participants' Profile
                                          Advanced NC Programmers

     Prerequisites
                                          Students attending this course should have knowledge of Numerical Control
                                          Infrastructure(NCI), PMG, SMG and MMG workbench.

     Content
                                          - Multi Axis Flank Contouring operation presentation
                                          - Geometry tab
                                          - Strategy tab
                                          - Multi Axis Helix machining operation presentation
                                          - Geometry tab
                                          - Strategy tab
                                          - Cavities Roughing operation presentation
                                          - Geometry tab
                                          - Strategy tab

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                           Mar 11, 2008   68/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            LMG: Lathe Machining
                       Solutions

     Course Code                          EDU-CAT-E-LMG-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-LMG-FI-V5R18
                                          Foils: EDU-CAT-E-LMG-FF-V5R18
                                          Exercises: EDU-CAT-E-LMG-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          -Identify and use the Lathe Machining workbench tools
                                          -Define Lathe Machining operations
                                          -Manage Tools and Tool Assemblies
                                          -Use different methodologies for Lathe Machining

     Participants' Profile
                                          NC Programmers

     Prerequisites
                                          Students attending this course should have knowledge of CATIA V5
                                          Fundamentals and Numerical Control Infrastructure workbench

     Content
                                          -Introduction to Lathe Machining
                                          -Crankshaft:Master Exercise Presentation
                                          -Crankshaft (Step:1)
                                          -Lathe Operation
                                          -Rough Turning Operation
                                          -Crankshaft (Step:2)
                                          -Groove Turning Operation
                                          -Crankshaft (Step:3)
                                          -Recess Turning Operation
                                          -Crankshaft (Step:4)
                                          -Groove Finish Turning Operation
                                          -Profile Finish Turning Operation
                                          -Crankshaft (Step:5)
                                          -Thread Turning Operation
                                          -Crankshaft (Step:6)
                                          -Sequential Turning Operation
                                          -Crankshaft (Step:7)
                                          -Ramp Rough Turning Operation
                                          -Ramp Recess Turning Operation
                                          -Tools and Tool Assemblies Management
                                          -Methodologies for Lathe Machining
                                          -Added Exercises

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008   69/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            MLG: Multi-Slide Lathe Machining
                       Solutions

     Course Code                          EDU-CAT-E-MLG-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-MLG-FI-V5R17
                                          Foils: EDU-CAT-E-MLG-FF-V5R17
                                          Exercises: EDU-CAT-E-MLG-FX-V5R17

     Objectives
                                          Upon completion of this course you will learn how to program with CATIA V5
                                          Multi turret & Multi spindle machines.

     Participants' Profile
                                          NC programmer who wants to optimize the NC Program in a Multi turret
                                          Machine environment

     Prerequisites
                                          Students attending this course must have knowledge of CATIA V5
                                          Fundamentals, NC Infrastructure, Lathe Machining

     Content
                                          - Introduction to Multi- Slide Lathe Machining
                                          - Machine Definition
                                          - Master Exercise: Turning Part
                                          - Create Manufacturing Programs
                                          - Create Synchronizations
                                          - Gantt Chart View
                                          - Step 2: Organize your Program and Create Synchronizations
                                          - Time Based Replay
                                          - NC Outputs
                                          - Step 3: Replay operations and generate NC Code
                                          - Create the NC Programs
                                          - Added Exercise: Turning Part


     Exercises
                                          Ex. 1: Define Multi Axis turning machine (30min) / All sectors
                                          Ex. 2: Organize your Program & create synchronizations (30min) / All sectors
                                          Ex. 3: Replay operations and generate NC Code (60min) / All sectors
                                          Ex. 4: Multi spindle machining (90min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008      70/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            MMG: Multi-Axis Surface Machining
                       Solutions

     Course Code                          EDU-CAT-E-MMG-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-MMG-FI-V5R18
                                          Foils: EDU-CAT-E-MMG-FF-V5R18
                                          Exercises: EDU-CAT-E-MMG-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to
                                          - Identify and use the Multi-Axis Surface Machining workbench tools.
                                          - Define 5-Axis machining operations such as Multi-Axis Sweeping, Multi-Axis
                                          Contour Driven, Multi-Axis Curve Machining, Define Multi-Axis Isoparametric
                                          Machining, Multi-Axis Drilling and Multi-Axis Tube Machining.

     Participants' Profile
                                          Advanced NC Programmers

     Prerequisites
                                          Students attending this course should have knowledge of CATIA V5 SMG
                                          Fundamentals

     Content
                                          - Multi-Axis Sweeping Operation
                                          - Multi-Axis Contour Driven Operation
                                          - Multi-Axis Curve Machining Operation
                                          - Multi-Axis Isoparametric Machining Operation
                                          - Multi-Axis Drilling Operation
                                          - Multi-Axis Tube Machining Operation

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008      71/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            MPA: Prismatic Machining Preparation Assistant
                       Solutions

     Course Code                          EDU-CAT-E-MPA-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-MPA-FI-V5R18
                                          Foils: EDU-CAT-E-MPA-FF-V5R18
                                          Exercises: EDU-CAT-E-MPA-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-MPA-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Define 2.5 Axis Milling operations in CATIA V5
                                          - Create prismatic machinable features
                                          - Form a link between Design and Manufacturing

     Participants' Profile
                                          NC Programmers

     Prerequisites
                                          Students attending this course should have knowledge of CATIA V5
                                          Fundamentals, Numerical Control Infrastructure, Prismatic Machining

     Content
                                          - Introduction to Prismatic Machining Preparation Assistant
                                          - Global features recognition
                                          - Locall features recognition

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008   72/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            MPG: Multi Pocket Machining
                       Solutions

     Course Code                          EDU-CAT-E-MPG-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-MPG-FI-V5R18
                                          Foils: EDU-CAT-E-MPG-FF-V5R18
                                          Exercises: EDU-CAT-E-MPG-FX-V5R18

     Objectives
                                          In this course, you will learn how to define a power Machining operation

     Participants' Profile
                                          NC programmer knowing how to work with CATIA V5 Parts and already skilled
                                          in Machining products.

     Prerequisites
                                          Fundamentals about CATIA V5
                                          Numerical Control Infrastructure

     Content
                                          - Introduction to Multi- Pockets Machining
                                          - Power Machining: Geometry
                                          - Power Machining: Strategy
                                          - Managing Offsets

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      73/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            NCI: Numerical Control Infrastructure
                       Solutions

     Course Code                          EDU-CAT-E-NCI-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-NCI-FI-V5R18
                                          Foils: EDU-CAT-E-NCI-FF-V5R18
                                          Exercises: EDU-CAT-E-NCI-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-NCI-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Identify and use the tools specific to Manufacturing workbenches
                                          - Create a Manufacturing Program and simulate it
                                          - Manage Tools and Tool Catalogs
                                          - Define and verify the Tool Path
                                          - Generate NC data using an integrated Post Processor
                                          - Create shop floor documentation
                                          - Manage design changes
                                          - Import V4 data

     Participants' Profile
                                          Manufacturing Users (NC Programmers)

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          COMMON TOPICS
                                          Lesson 1 : Workbench Presentation
                                          Lesson 2 : Define Setup (Part Operation)
                                          Lesson 3 : Machining Operation, Macros, Tools Presentation
                                          Lesson 4 : Tool Path Verification & Simulation
                                          lesson 5 : Auto sequence
                                          lesson 6 : Auxiliary Operations
                                          lesson 7 : Output generation
                                          lesson 8 : Axial Operations
                                          lesson 9 : Hole selection - Machining Pattern Management
                                          lesson 10 : The different Process Views
                                          Lesson 11 : Geometry wizard (edge, surface)

                                          ADVANCED TOPICS
                                          Lesson 12 : Import & Modify Tool Path
                                          Lesson 13 : Resource Management
                                          Lesson 14 : PP Word Table customization
                                          Lesson 15 : V4 NCMill & NCLathe Set Import (optional)
                                          Lesson 16 : Design Change Management
                                          Lesson 17 : Machining Processes

                                          APPENDIX
                                          Settings


     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008     74/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            PMG: Prismatic Machining
                       Solutions

     Course Code                          EDU-CAT-E-PMG-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-PMG-FI-V5R18
                                          Foils: EDU-CAT-E-PMG-FF-V5R18
                                          Exercises: EDU-CAT-E-PMG-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-PMG-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Identify and use the Prismatic Machining workbench tools
                                          - Define Prismatic Machining operations (2.5 Axis Milling) in CATIA V5
                                          - Create Prismatic Machining Area and Rework Area
                                          - Define and modify NC Macros

     Participants' Profile
                                          NC Programmers

     Prerequisites
                                          CATIA V5 Fundamentals
                                          Numerical Control Infrastructure

     Content
                                          Milling operations:
                                          - Facing,
                                          - Pocketing,
                                          - Prismatic Roughing,
                                          - Profile contouring,
                                          - Groove milling,
                                          - Point to point,
                                          - Curve following,
                                          - Prismatic rework area,
                                          - Prismatic machining area,
                                          - Transition Paths (macros)

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008         75/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            SMG: Surface Machining
                       Solutions

     Course Code                          EDU-CAT-E-SMG-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-SMG-FI-V5R18
                                          Foils: EDU-CAT-E-SMG-FF-V5R18
                                          Exercises: EDU-CAT-E-SMG-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-SMG-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Identify and use the Surface Machining workbench tools
                                          - Define 3-Axis Surface Machining operations
                                          - Create a Machining Area before performing the operations
                                          - Define a Rework Area
                                          - Analyze and modify the Tool Path

     Participants' Profile
                                          Manufacturing users (NC programmers)

     Prerequisites
                                          - CATIA V5 Fundamentals
                                          - Numerical Control Infrastructure




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008   76/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Content
                                          Introduction to the 3-Axis Surface Machining
                                            Accessing the Workbench
                                            Workbench the user interface
                                            Process/Product/Resources model
                                            Manufacturing terminology
                                            General process

                                          Creating geometrical elements
                                           Creates rough stock
                                           Inserts an STL file
                                           Creates a stock by offset
                                           Points creation wizard
                                           Limit lines projection wizard
                                           Limit lines creation wizard

                                          Creating a Machining Feature
                                           Geometrical Zone Creation
                                           Machining/Slope Area Creation
                                           Rework Area Creation
                                           Offset group Creation

                                          Creating a 3-Axis Surface Machining Operation
                                           3-Axis Machining Operations
                                           Sweep Roughing Operation
                                           Roughing Operation
                                           Sweeping Operation
                                           Pencil Operation
                                           Zlevel Operation
                                           Contour-driven Operation
                                           Isoparametric machining Operation
                                           Spiral milling Operation
                                           Profile Contouring Operation

                                          Analysing and modifying tool path


     Notes
                                          This course is linked to NCI course.

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   77/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                       Machining            STL: STL Rapid Prototyping
                       Solutions

     Course Code                          EDU-CAT-E-STL-F
     Brand & Release                      CATIA V5R18
     Duration                             0.3 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-STL-FI-V5R18
                                          Foils: EDU-CAT-E-STL-FF-V5R18
                                          Exercises: EDU-CAT-E-STL-FX-V5R18

     Objectives
                                          In this course you will learn how to
                                          - Create a triangular mesh from a surface or a solid
                                          - Correct, tune, improve a triangular mesh,
                                          - Export a mesh as a standard STL file usable for rapid prototyping by
                                          stereolithography or any other prototyping technique (FDM, classical 3 axis
                                          milling)

     Participants' Profile
                                          Surface Designer

     Prerequisites
                                          DSE-F: Digitized Shape Editor

     Content
                                          - Introduction
                                          - Creating a mesh from a basic surface
                                          - Tuning the mesh
                                          - Giving a thickness to the mesh
                                          - Optimizing the mesh
                                          - Exporting the mesh as an STL file

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008     78/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                                                             CATIA Course Material

                                                                   Product Synthesis Solutions




www.cadfamily.com contact:cadserv21@hotmail.com
                              CATIA V5R18 Course Catalog                                    Mar 11, 2008   79/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                   Product Synthesis        HMN: Human Modeling
                       Solutions

     Course Code                          EDU-CAT-E-HMN-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-HMN-FI-V5R18
                                          Foils: EDU-CAT-E-HMN-FF-V5R18
                                          Exercises: EDU-CAT-E-HMN-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-HMN-FS-V5R18

     Objectives
                                          In this course, you will learn how to use our Human Model technology in order
                                          to leverage your ergonomics analysis. Among other things, you will learn how
                                          to position and manipulate the manikins within a V5 scene. In addition, you will
                                          evaluate the comfort, the reach, clearance, and the vision of your target
                                          population. Additional to standard ergonomics analysis you will evaluate
                                          interaction between the manikin and geometries in the scene. Finally, you will
                                          realize a simulation (animation).

     Participants' Profile
                                          - Designers
                                          - Engineers
                                          - Human factors specialists
                                          - Any Health specialist

     Prerequisites
                                          Course on Digital mock-up

     Content
                                          You will use the Ergonomics Design & Analysis tools to review the ergonomics
                                          aspect of a manikin inside and around a vehicle, with the tools of the
                                          workbenches: Human Builder, Human Measurement Editor, Human Activity
                                          Analysis and Human Postural Analysis.

     Exercises
                                          Ex. 1: Ergonomics review inside a vehicle with Human Measurement Editor
                                          (240min) / Automotive
                                          Ex. 2: Ergonomics review inside a vehicle with Human Postural Analysis
                                          (240min) / Automotive
                                          Ex. 3: Ergonomics review around a vehicle with Human Activity Analysis
                                          (240min) / Automotive
                                          Ex. 4: Ergonomics review inside a vehicle with Human Builder (240min) /
                                          Automotive




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      80/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                   Product Synthesis        KBE: Knowledge-Based Engineering
                       Solutions

     Course Code                          EDU-CAT-E-KBE-F
     Brand & Release                      CATIA V5R18
     Duration                             3 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-KBE-FI-V5R18
                                          Foils: EDU-CAT-E-KBE-FF-V5R18
                                          Exercises: EDU-CAT-E-KBE-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-KBE-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Become familiar with the knowledgeware working environment, how it can be
                                          accessed, the terminology that will be used and the settings
                                          - Create parametric parts and assemblies
                                          - Embed knowledge in your designs by controlling it using parameters,
                                          formulae, rules, checks and reactions
                                          - Create and reuse Power Copies and User-Defined Features
                                          - Create and store knowledge-driven design templates so as to instantiate
                                          them in a new context
                                          - Create and reuse advanced instantiation features like Knowledge Pattern

     Participants' Profile
                                          CATIA V5 Users

     Prerequisites
                                          CATIA V5 Fundamentals

     Content
                                          - Introduction
                                          - Knowledge Advisor Workbench Presentation
                                          - Creating parameters, Formulas and Lists
                                          - Creating Adaptive Behaviors
                                          - Creating Design Tables and Part Families
                                          - Using Knowledge Advisor Tools
                                          - Product Knowledge Template Workbench Presentation
                                          - Creating and Using Powercopies
                                          - Creating and Using User-defined Features
                                          - Creating and Using Part and Assembly Templates
                                          - Managing Standard Components
                                          - Creating and Using Knowledge Patterns

     What is new in this release
                                          New course

     Exercises
                                          Ex. 1: Stringer / All sectors
                                          Ex. 2: Knowledge Advisor / All sectors
                                          Ex. 3: Keyway / All sectors
                                          Ex. 4: User-defined Features / All sectors
                                          Ex. 5: Document Templates / All sectors
                                          Ex. 6: Jigs and Fixtures / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008     81/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                   Product Synthesis        KBE: Knowledge-Based Engineering
                       Solutions

     Course Code                          EDU-CAT-E-KBE-A
     Brand & Release                      CATIA V5R18
     Duration                             1.5 days
     Language                             English
     Level                                Advanced
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-KBE-AI-V5R18
                                          Foils: EDU-CAT-E-KBE-AF-V5R18
                                          Exercises: EDU-CAT-E-KBE-AX-V5R18
                                          Detailed Steps: EDU-CAT-E-KBE-AS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Become familiar with the knowledgeware working environment, the way it can
                                          be accessed, the terminology that will be used and the settings
                                          - Embed complex design knowledge in a parametric part using knowledgeware
                                          expert rules, checks and reactions
                                          - Automate your design modifications using various knowledgeware expert
                                          tools
                                          - Define, solve and analyze an optimization problem using tools from the
                                          CATIA Product Knowledge Engineering workbench

     Participants' Profile
                                          CATIA V5 Advanced Users

     Prerequisites
                                          CATIA V5 Basics
                                          CATIA V5 Knowledgeware Fundamentals

     Content
                                          - Introduction to Knowledge Expert
                                          - Creating and Using an Expert Rule
                                          - Creating and Analyzing an Expert Check
                                          - Creating a Rule Base
                                          - Product Engineering Optimizer Workbench Presentation
                                          - Optimization Problem Formulation
                                          - Optimization Problem Resolution
                                          - Solution Analysis
                                          - Best Practices for Optimization with PEO
                                          - Design of Experiments Tools
                                          - Constraint Satisfaction Tools

     What is new in this release
                                          New course

     Exercises
                                          Ex. 1: Connector / All sectors
                                          Ex. 2: LBlock / All sectors
                                          Ex. 3: Strap Tension Optimization / All sectors
                                          Ex. 4: Bottle / All sectors
                                          Ex. 5: Beam Mass Optimization / All sectors
                                          Ex. 6: Hanger / All sectors
                                          Ex. 7: Fastener / All sectors
                                          Ex. 8: Surfacic Structure / All sectors
                                          Ex. 9: 1D Beam / All sectors
                                          Ex. 10: Silo / All sectors
                                          Ex. 11: Design of Experiments / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008      82/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                   Product Synthesis        KWA: Knowledge Advisor
                       Solutions

     Course Code                          EDU-CAT-E-KWA-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-KWA-FI-V5R18
                                          Foils: EDU-CAT-E-KWA-FF-V5R18
                                          Exercises: EDU-CAT-E-KWA-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-KWA-FS-V5R18

     Objectives
                                          Access the Knowledgeware working environment
                                          Create user parameters and formulae
                                          Create Design Tables and use them to create part families
                                          Create reaction features that react to an event such as an update
                                          Use the Macro with Argument feature
                                          Use inspection, equations, law and loop tools

     Participants' Profile
                                          CATIA V5 users

     Prerequisites
                                          CATIA V5 Basics

     Content
                                          This course you will teach you how to manage Knowledge Advisor objects in
                                          order to embed knowledge within a design. It will teach you how to use
                                          knowledge rules to reduce errors and automate modifications.

                                          -Workbench presentation
                                          -Creating user parameters and formulas
                                          -Defining Checks, Rules, Reactions, Lists, Laws, Loops and macros with
                                          arguments
                                          -Associating URLs to parameters or relations
                                          -Running macros from Rules or Reactions
                                          -Using the Knowledge Inspector tool
                                          -Managing Design Tables and part family catalogs

     Exercises
                                          Ex. 1: Wheel Rim (90min) / All sectors
                                          Ex. 2: Light Bulb (60min) / All sectors
                                          Ex. 3: Sheet Metal Part (30min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008    83/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                   Product Synthesis        KWE: Knowledge Expert
                       Solutions

     Course Code                          EDU-CAT-E-KWE-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-KWE-FI-V5R18
                                          Foils: EDU-CAT-E-KWE-FF-V5R18
                                          Exercises: EDU-CAT-E-KWE-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Become familiar with the Knowledgeware working environment, how it can be
                                          accessed, the terminology that will be used and the Settings.
                                          - Embed complex design knowledge in a parametric part using Knowledgeware
                                          expert rules checks and reactions.
                                          - Automate your designs modifications using various Knowledgeware Expert
                                          tools.

     Participants' Profile
                                          CATIA V5 advanced users

     Prerequisites
                                          CATIA V5 Basics
                                          CATIA V5 Knowledgeware fundamentals

     Content
                                          - Introduction to Knowledge Expert
                                          - Creating and Using an Expert Rule
                                          - Creating and Analyzing an Expert Check
                                          - Using a Rule Base

     Exercises
                                          Ex. 1: Connector (40min) / All sectors
                                          Ex. 2: LBlock Correction (40min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008     84/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                   Product Synthesis        KWF: Knowledge Fundamentals
                       Solutions

     Course Code                          EDU-CAT-E-KWF-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-KWF-FI-V5R18
                                          Foils: EDU-CAT-E-KWF-FF-V5R18
                                          Exercises: EDU-CAT-E-KWF-FX-V5R18

     Objectives
                                          Upon Completion of this course you will be able to:
                                          -Access the knowledgeware working environment
                                          -Manage the knowledgeware working environment
                                          -See how collaborative work affects knowledge features
                                          -Use parameters, formulae and design tables
                                          -Create parametric parts and assemblies
                                          -Share parameters and re-use relations

     Participants' Profile
                                          CATIA V5 Users

     Prerequisites
                                          Students attending this course should have knowledge of CATIAV5 Part
                                          Design and CATIA V5 Assembly Design

     Content
                                          - Introduction to Common Knowledge Tools
                                          - Common Knowledge Tools
                                          - Collaborative Work and Knowledge
                                          - Stringer Assembly Exercice

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008   85/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                   Product Synthesis        PEO: Product Engineering Optimizer
                       Solutions

     Course Code                          EDU-CAT-E-PEO-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-PEO-FI-V5R18
                                          Foils: EDU-CAT-E-PEO-FF-V5R18
                                          Exercises: EDU-CAT-E-PEO-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-PEO-FS-V5R18

     Objectives
                                          In this course, you will learn the functionalities of CATIA Product Engineering
                                          Optimizer (PEO):
                                          - Definition of an optimization problem
                                          - Specification of the optimization algorithm,
                                          - Solving of an optimization problem,
                                          - Analyzing and reporting on the results,
                                          - Use of the Design of Experiments tool to understand the behavior of a system
                                          thanks to space exploration,
                                          - Use of the Constraint Satisfaction tool to solve complex contraint problems
                                          (with no objective function)

     Participants' Profile
                                          CATIA V5 Users

     Prerequisites
                                          CATIA Basics

     Content
                                          - Workbench Presentation
                                          - Optimization Problem Formulation
                                          - Optimization problem resolution
                                          - Solution analysis
                                          - Best practices for optimization with PEO
                                          - Design of Experiments tool
                                          - Constraint Satisfaction tool

     Exercises
                                          Ex. 1: Strap tension optimization (90min) / All sectors
                                          Ex. 2: Beam mass optimization (30min) / All sectors
                                          Ex. 3: Shape optimization: Hanger (40min) / All sectors
                                          Ex. 4: Fastener Shape Optimization (30min) / All sectors
                                          Ex. 5: Surfacic structure Structural Optimization (20min) / All sectors
                                          Ex. 6: Child Swing Structural Optimization (25min) / All sectors
                                          Ex. 7: Silo Structural Optimization (30min) / All sectors
                                          Ex. 8: Design of experiments (30min) / All sectors
                                          Ex. 9: Beam Mass Minimization through Constraint Satisfaction (20min) / All
                                          sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008      86/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                                                                             CATIA Course Material

                                                       Shape Design & Styling Solutions




www.cadfamily.com contact:cadserv21@hotmail.com
                              CATIA V5R18 Course Catalog                                    Mar 11, 2008   87/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     DL1: Developed Shapes
                       Solutions

     Course Code                          EDU-CAT-E-DL1-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-DL1-FI-V5R18
                                          Foils: EDU-CAT-E-DL1-FF-V5R18
                                          Exercises: EDU-CAT-E-DL1-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-DL1-FS-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          - Generate unfolded ruled surface
                                          - Develop wires and points onto a revolution surface

     Participants' Profile
                                          Surface Designers

     Prerequisites
                                          Students attending this course should have knowledge of CATIA V5
                                          Fundamentals and Generative Shape Design

     Content
                                          User interface and functionalities
                                          User interface
                                          Unfolded surfaces
                                          Develop wires
                                          Exercise Presentation
                                          To Sum Up

     Exercises
                                          Ex. 1: Water bottle and its support (45min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                           Mar 11, 2008   88/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     DSE: Digitized Shape Editor
                       Solutions

     Course Code                          EDU-CAT-E-DSE-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-DSE-FI-V5R18
                                          Foils: EDU-CAT-E-DSE-FF-V5R18
                                          Exercises: EDU-CAT-E-DSE-FX-V5R18

     Objectives
                                          Upon Completion of this course you will be able to:
                                          - Import and optimize digitized data such as cloud of points
                                          - Compute and optimize a mesh based on digitized data
                                          - Extract the characteristic curves of a mesh

     Participants' Profile
                                          Shape Designers

     Prerequisites
                                          Students attending this course should be familiar with the CATIA V5 interface

     Content
                                          This course will teach you how to import, clean and optimize digitized data
                                          such as clouds of points. You will also learn how to create an optimized mesh
                                          on the digitized data and how to extract the characteristic curves from this
                                          mesh.

                                          - Introduction to Digitized Shape Editor
                                          - Point processing
                                          - Mesh processing
                                          - Scans and curves
                                          - Advanced tasks

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      89/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                Shape Design & Styling      DSS: Shape Sculptor
                      Solutions

     Course Code                          EDU-CAT-E-DSS-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-DSS-FI-V5R18
                                          Foils: EDU-CAT-E-DSS-FF-V5R18
                                          Exercises: EDU-CAT-E-DSS-FX-V5R18

     Objectives
                                          In this course you will learn how to use the Shape Sculptor product to import,
                                          analyze, enhance meshes, then modify them by adding details or deforming
                                          shapes.

     Participants' Profile
                                          Style designers, modelers

     Prerequisites
                                          CATIA Fundamentals




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008       90/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Content
                                          - Introduction to CATIA Shape Sculptor
                                             Process overview
                                             Polygon modeling
                                             Accessing the workbench
                                             The user interface
                                             Using the compass
                                          - General Tools
                                             Import
                                             Export
                                             Display Options
                                             Highlight
                                             Curvature
                                          - Selection and Activation
                                             Selection / Activation
                                             Selection
                                             Activation
                                          - Creation
                                             Creating Curves
                                             3D Curve
                                             Paint Curve
                                             Creating meshes
                                             Generate mesh
                                             Tesselate
                                             Rough Offset
                                          - Mesh Edition
                                             Editing meshes
                                             Decimate / Refine
                                             Smooth / Brush Smooth
                                             Delete / Extract / Copy triangles
                                             Slice / Stitch
                                             Mesh Intersect
                                             Trim/Split
                                          - Modeling Shapes
                                             Modeling shapes
                                             Control points
                                             Project curve / Extract curve
                                             Curve Sculpt
                                             Emboss
                                             Push/Pull
                                             Surface Sculpt
                                             Sharp Edge
                                             Grid Modeling
                                             Interactive grid Modeling

     What is new in this release
                                          New course

     Exercises
                                          Ex. 1: Hairdryer: Import and Analysis / All sectors
                                          Ex. 2: Boot ski: Selection and Mesh / All sectors
                                          Ex. 3: Bike: Modeling Shapes / All sectors
                                          Ex. 4: Dashboard / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008   91/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     FSK: FreeStyle Sketch Tracer
                       Solutions

     Course Code                          EDU-CAT-E-FSK-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-FSK-FI-V5R18
                                          Foils: EDU-CAT-E-FSK-FF-V5R18
                                          Exercises: EDU-CAT-E-FSK-FX-V5R18

     Objectives
                                          Upon completion of this course you will be able to:
                                          Use an image as a background or as a basis for design
                                          Import an image into CATIA V5
                                          Position an image in the CATIA V5 environment

     Participants' Profile
                                          Shape Designers

     Prerequisites
                                          Students attending this course should have experience in the following
                                          domain(s): CATIA V5 fundamentals

     Content
                                          Introduction to CATIA Sketch TracerIntroductionAccessing the
                                          workbenchUser Interface: Sketch Tracer
                                          Importing the Sketches
                                                What is Importing a Sketch
                                                Why Import a SketchHow to Create an Immersive Sketch
                                                 How to Create an Immersive Sketch Using Screen ShotModifying the
                                          Appearance of a Sketch
                                                Manipulating the Focus
                                          Positioning the SketchesWhat is Positioning a Sketch ?How to Position
                                          a Sketch Using Cylindrical ViewHow to Position a Sketch Using Conical
                                          View
                                          managing Views
                                                What is Managing Views ?
                                                How to Manage Interactive ViewsHow to Manage Conical Views


     What is new in this release
                                          Sea Car exercise modified

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   92/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     FSS: FreeStyle Shaper, Optimizer & Profiler
                       Solutions

     Course Code                          EDU-CAT-E-FSS-F
     Brand & Release                      CATIA V5R18
     Duration                             1.5 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-FSS-FI-V5R18
                                          Foils: EDU-CAT-E-FSS-FF-V5R18
                                          Exercises: EDU-CAT-E-FSS-FX-V5R18

     Objectives
                                          In this course you will learn how to:
                                          - Create styled shapes using digitized data
                                          - Create surfaces using a curve-based approach
                                          - Create surfaces using a surface-based approach
                                          - Analyze and correct the curve quality
                                          - Analyze and correct the surface quality

     Participants' Profile
                                          Surface Designers

     Prerequisites
                                          Students attending this course should have knowledge of CATIA Surface
                                          Design (EDU-CAT-E-GS1-F - V5R16)

     Content
                                          This course teaches you how to create flawless, styled shapes from scratch
                                          using three-dimensional free-form curves and surfaces or with digitized data.
                                          You will also learn how to analyze and improve the quality of existing curves
                                          and surfaces.


                                          Introduction to Freestyle Shaper

                                          Using the Curve-Based Approach

                                          Using the Surface-Based Approach

                                          Analysis Tools

     What is new in this release
                                          - Creating a Styling fillet added


     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      93/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     GSD: Surface Design Expert
                       Solutions

     Course Code                          EDU-CAT-E-GSD-F
     Brand & Release                      CATIA V5R18
     Duration                             2 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-GSD-FI-V5R18
                                          Foils: EDU-CAT-E-GSD-FF-V5R18
                                          Exercises: EDU-CAT-E-GSD-FX-V5R18

     Objectives
                                          Upon completion of this course, you will be able to:
                                          - Correctly recall the tools of the Generative Shape Design workbench that are
                                          common to MD2 and HD2 licenses
                                          - Identify and use the Generative Shape Design tools that are specific to the
                                          HD2 license
                                          - Create advanced and parameterized swept surfaces
                                          - Perform advanced surfaces analysis and gap correction
                                          - Improve geometry quality and stability

     Participants' Profile
                                          Mechanical Surface Designers

     Prerequisites
                                          Students who are familiar with the basics of wireframe and surfaces creation

     Content
                                          This course focuses on the Generative Shape Design tools specific to the HD2
                                          license and will first recall and summarize the tools covered in the Surface
                                          Design course. You will capitalize on this with advanced surfaces creation
                                          tools, quality checking and correction techniques, and be introduced to surface
                                          creation in a multi-model environment.

                                          - Inroduction to Surface Design
                                          - Creating Advanced Wireframe Features
                                          - Wireframe Analysis and Repair
                                          - Creating Advanced Swept Surfaces
                                          - Creating Advanced Blending Surfaces
                                          - Surface Analysis
                                          - Additional Surface Design Tools

     What is new in this release
                                          This course was updated in order to reflect the main CATIA V5R17
                                          enhancements

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                        Mar 11, 2008       94/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                Shape Design & Styling      GSO: Generative Shape Optimizer
                      Solutions

     Course Code                          EDU-CAT-E-GSO-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-GSO-FI-V5R18
                                          Foils: EDU-CAT-E-GSO-FF-V5R18
                                          Exercises: EDU-CAT-E-GSO-FX-V5R18
                                          Detailed Steps: EDU-CAT-E-GSO-FS-V5R18

     Objectives
                                          Upon completion of the course you will learn to:
                                          - Develop Shapes
                                          - Morph Shapes
                                          - Create Junctions (BIW application) between surfaces
                                          - Work with Volumes
                                          - Create junctions between existing beams
                                          - Morph surfaces using target curves and shapes
                                          - Add bumps on surfaces

     Participants' Profile
                                          Surface Designers

     Prerequisites
                                          Students attending this course should have knowledge of:
                                          CATIA Surface Design.

     Content
                                          This course introduces you to the Generative Shape Optimizer tools within the
                                          GSD workbench. You will learn how to manage volumes and how to defomr
                                          shapes using the morphing and bump tools. You will also learn how to develop
                                          shapes and how to create junctions between beams.

                                          Introduction to Generative Shape Optimizer
                                           - Accessing Generative Shape Optimizer
                                           - The User Interface
                                          Creating Offsets:
                                           - Variable Offset
                                           - Rough Offset
                                          Developing Shapes:
                                           - Developing wire
                                          Using BiW Tools:
                                           - Creating junctions
                                           - Creating a Diabolo Seat
                                          Creating Advanced Surfaces:
                                           - Creating bumped surfaces
                                           - Deforming surfaces according to curve wrapping
                                           - Deforming surfaces according to surface wrapping
                                           - Shape Morphing
                                          Creating Volumes
                                           - What is a Volume
                                           - Types of Volumes
                                           - Volumes made from Sketches
                                           - Volumes made from Surfaces
                                           - Dress-up features on Volumes
                                           - Volumes using Boolean operations
                                           - Volumes from Operations or Transformations




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008   95/101

The document is for study only,if any tort to your rights,please inform us,we will delete
     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008   96/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     HD2: Generative Shape Design V5R18 Update
                       Solutions

     Course Code                          EDU-CAT-E-HD2-U
     Brand & Release                      CATIA V5R18
     Duration                             0.1 day
     Language                             English
     Level                                Update
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-HD2-UI-V5R18
                                          Foils: EDU-CAT-E-HD2-UF-V5R18

     Objectives
                                          Upon completion of this course you will be able to use the new and enhanced
                                          functionalities of V5R18 Generative Shape Design workbench.

     Participants' Profile
                                          CATIA Surface Designers

     Prerequisites
                                          Students attending this course must have knowledge of CATIA Generative
                                          Shape Design V5R17.

     Content
                                          -Enhancements in Sweep
                                          -Chordal Fillet
                                          -Other Enhancements

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                      Mar 11, 2008     97/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     IMA: Imagine & Shape
                       Solutions

     Course Code                          EDU-CAT-E-IMA-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-IMA-FI-V5R18
                                          Foils: EDU-CAT-E-IMA-FF-V5R18
                                          Exercises: EDU-CAT-E-IMA-FX-V5R18

     Objectives
                                          Upon Completion of this course you will be able to:
                                          - Explain what is a subdivision surface
                                          - Create and deform subdivision surfaces
                                          - Create and deform IMA curves with the curve modeler
                                          - Associate curves with subdivision surfaces

     Participants' Profile
                                          This course is targeted mainly for CATIA:
                                          Application engineers
                                          Mechanical Designers
                                          Industrial Designers

     Prerequisites
                                          Students attending this course should be familiar with the Generative Shape
                                          Design workbench

     Content
                                          This course will introduce the concept of subdivision surfaces and will teach
                                          you the tools available to create these surfaces. You will learn the
                                          manipulations necessary to modify and shape the subdivision surfaces. You
                                          will also learn how to create curves with the curve modeler and how to
                                          associate subdivision surfaces with curves.

                                          Introduction to Imagine & Shape

                                          Surface modeling:
                                          -Creating Basic Surfaces
                                          -Manipulating Surfaces
                                          -Modifying the Topology

                                          Curve modeling:
                                          -Curve creation
                                          -CUrve deformation

                                          Curve creation:
                                          -Curve deformation
                                          -Sketching
                                          -Manipulate point
                                          -Smoothing
                                          -Fillet
                                          -Erase
                                          -On plane

                                          Imaging and Shape Recommendation

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                       Mar 11, 2008      98/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     QSR: Quick Surface Reconstruction
                       Solutions

     Course Code                          EDU-CAT-E-QSR-F
     Brand & Release                      CATIA V5R18
     Duration                             1 day
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-QSR-FI-V5R18
                                          Foils: EDU-CAT-E-QSR-FF-V5R18
                                          Exercises: EDU-CAT-E-QSR-FX-V5R18

     Objectives
                                          Upon Completion of this course you will be able to:
                                          - Create Scans from point cloud data
                                          - Create curves from scans
                                          - Create surfaces from scans
                                          - Create model and fillet model

     Participants' Profile
                                          Surface Designers

     Prerequisites
                                          Students attending this course should have experience in the following
                                          domain(s):
                                          CATIA V5 fundamentals, Digitized Shape Editor and Surface Design

     Content
                                          This course will show you how to reuse tools from Digitized Shape Editor
                                          workbench, and which are the tools specific to QSR. You will learn how scans
                                          and curves can be rapidly created on a mesh, and how surfaces can be quickly
                                          derived from the resulting curves.

                                          - Introduction
                                          - Creating scans
                                          - Creating curves
                                          - Creating surfaces
                                          - Create curve networks
                                          - Automatic processes

     Exercises
                                          None




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                          Mar 11, 2008   99/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     RSO: Realistic Shape Optimizer
                       Solutions

     Course Code                          EDU-CAT-E-RSO-F
     Brand & Release                      CATIA V5R18
     Duration                             0.5 day
     Language                             English
     Level                                Fundamentals
     Method                               ILT

     Training Material References
                                          Instructor Foils: EDU-CAT-E-RSO-FI-V5R18
                                          Foils: EDU-CAT-E-RSO-FF-V5R18
                                          Exercises: EDU-CAT-E-RSO-FX-V5R18

     Objectives
                                          In this course you will learn how to deform a surface or a set of surfaces using
                                          a displacement file resulting from a finite element analysis

     Participants' Profile
                                          Surface design Specialist or Expert
                                          Surface designers involved in tooling design

     Prerequisites
                                          GS1: CATIA Surface Design Companion
                                          or

                                          CCV: Core & Cavity Design

     Content
                                          Introduction to Realistic Shape Optimizer
                                          - Why do you need RSO ?
                                          Workbench presentation
                                          - Accessing the workbench
                                          Surface Deformation
                                          - Digitized Morphing
                                          - Update Digitized Morphing

     Exercises
                                          Ex. 1: Master exercise: Plastic Cover (30min) / All sectors
                                          Ex. 2: Additionnal exercise: Plane wing (30min) / Aerospace




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                         Mar 11, 2008      100/101

The document is for study only,if any tort to your rights,please inform us,we will delete
                 Shape Design & Styling     V5S: V5 Surface Design
                       Solutions

     Course Code                          EDU-CAT-E-V5S-F
     Brand & Release                      CATIA V5R18
     Duration                             3 days
     Language                             English
     Level                                Fundamentals
     Method                               Companion

     Training Material References
                                          Instructor Foils: EDU-CAT-E-V5S-FI-V5R17
                                          Foils: EDU-CAT-E-V5S-FF-V5R17

     Objectives
                                          Upon Completion of this course you will be able to:
                                          - Understand the GSD workbench
                                          - Create good quality curves or improve imported wireframe
                                          - Create good quality surfaces based on a sound wireframe geometry
                                          - Assemble, relimit and smoothly connect the surfaces to get a topology
                                          - Analyze surface quality and heal the defects
                                          - Manage surfaces in a multimodel environment

     Participants' Profile
                                          -Users familiar with CATIA V5 Fundamentals
                                          -Users who need to learn how to create advanced Mechanical Surfaces

     Prerequisites
                                          Students attending this course should be familiar with CATIA V5 Fundamentals
                                          and Microsoft Windows Operating System

     Content
                                          - Lesson 1: Introduction to Generative Shape Design
                                          - Lesson 2: Wireframe Creation
                                          - Lesson 3: Surface Creation
                                          - Lesson 4: Surface Re-limitation and Connection
                                          - Lesson 5: Surface Check Tools
                                          - Lesson 6: Work in Multi-Model Environment with Surface
                                          - Master Project
                                          - Additional Exercises


     Notes
                                          In addition to the exercises specified just above, this course contains:
                                          - Exercises included in the flow of the lessons to make students to manipulate
                                          on simple data and get familiar with the tools
                                          - Case Study exercises at the end of each lesson to allow students to review
                                          the tools seen in the lesson in a more concret set of data

                                          This course also contains CATIA demonstration data including instructions in
                                          the CATParts (3D annotations) to help the teacher to show what has to be
                                          shown.
                                          These demonstration data are also provided to the students (for lessons 2 to 5)
                                          to make the students manipulate while the teacher demonstrates.

     Exercises
                                          Ex. 1: Master Project: Toy Car (200min) / All sectors
                                          Ex. 2: Additional Exercise: Mobile Phone (60min) / All sectors
                                          Ex. 3: Additional Exercise: Plastic Bottle (180min) / All sectors




www.cadfamily.com contact:cadserv21@hotmail.com Catalog
                           CATIA V5R18 Course Material                                           Mar 11, 2008   101/101

The document is for study only,if any tort to your rights,please inform us,we will delete

								
To top