ECT ICT RFQ by gqz18849

VIEWS: 47 PAGES: 2

									ECT- ICT FIXTURE RFQ FORM
                              Date
                          Company
                 Contact Engineer
                 Test System Type
      Customer Quote Reference #
              Board Name/Number
                        Board Size  X DIM"                Y DIM "
                            Testing          Comp Side Up                         Comp Side Down
      Top side devices over 1.00”          QTY                         Height of tallest component
    Bottom side devices over .100”         QTY                         Height of tallest component
   Smallest Board Target Diameter
NOT REQUIRED WITH 307x SUMMARY or FIXTURE FILES PROVIDED
    Test Point Count: (Top Access)       100ml                   75ml                         50ml
        Test Point Count: (Bottom)       100ml                   75ml                         50ml
     Additional wire-wrap jumpers                              Drilling of extra holes
         Personality Pin (3070) Qty                         Power/GndBuss Bars Qty
                  Twisted Pair Qty

                  DATA Available    CAD                  AVL-BOM                             Gerber
                                      307x FIXTURE FILES
                                    GENRAD    NFR        PWR                 BOT             TOP             FWI

                     Fixture Size   ECT DETERMINE                                          Oversized
                                           HP307x 1/2 bank                              HP307x full bank
                                    12x16 SM               16x20 M                         20x24 L

             Fixture requirements   Dual Well                 Z-Flex                         GuidedPrb
                                    Single Well                               Dual Access

NOT REQUIRED WITH 307x SUMMARY or FIXTURE FILES PROVIDED
                Opens Devices Qty      TOP                             BOT                            SIDE
 (Test Jet,OpenXpress, Framescan) MUX TYPE

            PCBA SEAL METHOD             Gasket                     Vac Box                           HDG
                                     Mechanical                   Pneumatic
                                    Lexan Vaccum Assist Lid (for adding unpowered opens -PCB must seal
                                    Vias will be closed on production PCBAs
                     Silkscreen:    Indicate “W” for wet silkscreen, “P” for paper plot, or “N” for none
                                    TOP PLATE                 PROBE PLT                      GND PLANE
                          PLOTS     “NN” for node #s; “SL” for PCB silkscreen layer,“GRID” .100” grid
     (Probe Load Charts Provided)   TOP PLATE                 PROBE PLT                      GND PLANE
             Frame Handle Option    ECT Std       8" Handle      Alumilift   Alumilift II (with handle cut-outs)

        OPTIONS / ACCESSORIES
                    LEDCHECK                TOP                       BOT                             SIDE
                   DUAL STAGE                     QTY of FCT Test Points
               Engraved Labels                    QTY           Engraving
                     Dust Cover                           Electric Counter
ECT- ICT FIXTURE RFQ FORM



Additional Questions
Specific board orientation required?

Are Board Marker Probes required?                    Location?

Are Switch Probes required?                          Locations?                   Wiring Info?

Are Insulator Probes required?                       Locations?

Are LED test required?                               LEDcheck                             Finn
Component Names and colors?

Will you be supplying a Current Rev Loaded Board as will be tested?                              Bare Board?


Is Power Wiring data included?

Are there any internal electronics or connectors, jacks, LED's that will be mounted on the Pan?
Will you provided a drawing showing the desired locations and wiring of these parts in the fixture?

Do you have any special labeling requirements?

What are your spare parts requirements?


           OTHER REQUIREMENTS

								
To top