Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

91 EHITUSMATERJALID JA EHITUS CO

VIEWS: 28 PAGES: 12

									1. EHITUSMATERJALID JA EHITUS
CONSTRUCTION MATERIALS AND BUILDING

1.4 Ehituselemendid
 Elements of buildings
- EVS 812-3:2002 Ehitiste tuleohutus. Osa 3: Küttesüsteemid
Fire safety of constructions - Part 3: Heating systems
- EVS 836:2003 Aknad, uksed ja luugid. Sissemurdmiskindlus. Nõuded ja liigitus
Windows, doors and shutters – Burglar resistance – Requirements and classification
- EVS 849:2003 Uksed ja aknad. Terminoloogia
Doors and windows – Terminology
- EVS 852:2003 Karkassfassaad. Terminoloogia
Curtain walling – Terminology
- EVS 855:2003 Tööstus-, kommerts- ning garaaziuksed ja –väravad. Tootestandard
Industrial, commercial and garage doors and gates – Product standard
- EVS 859:2003 Aknad ja välisuksed. Tootestandard
Windows and external pedestrian doors – Product standard
- EVS-EN 1026:2000 Windows and doors - Air permeability - Test method
- EVS-EN 1027:2000 Windows and doors - Watertightness - Test method
- EVS-EN 107:2003 Method of testing windows; Mechanical test
- EVS-EN 1121:2000 Doors – Behaviour between two different climates – Test method
- EVS-EN 1191:2000 Windows and doors – Resistance to repeated opening and closing –
Test method
- EVS-EN 1192:2000 Doors – Classification of strength requirements
- EVS-EN 1195:1999 Puittarindid. Katsemeetotid. Põrandalaudise toimimine
Timber structures – Test method – Performance of structural floor decking
- EVS-EN 1294:2000 Door leaves - Determination of the behaviour under humidity
variations in successive uniform climates
- EVS-EN 12045:2000 Shutters and blinds power operated - Safety in use - Measurement
of the transmitted force
- EVS-EN 12046-2:2000 Operating forces - Test method - Part 2: Doors
- EVS-EN 12056-3:2000 Gravity drainage systems inside buildings - Part 3: Roof
drainage, layout and calculation
- EVS-EN 12114:2000 Thermal performance of buildings - Air permeability of building
components and building elements - Laboratory test method
- EVS-EN 12152:2002 Curtain walling - Air permeability - Performance requirements
and classification
- EVS-EN 12153:2000 Curtain walling - Air permeability - Test method
- EVS-EN 12154:2000 Curtain walling - Watertightness - Performance requirements and
classification
- EVS-EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static
pressure
- EVS-EN 12179:2000 Curtain walling - Resistance to wind load - Test Method
- EVS-EN 12194:2000 Shutters, external and internal blinds - Misuse - Test methods
- EVS-EN 12207:2000 Windows and doors - Air permeability - Classification
- EVS-EN 12208:2000 Windows and doors - Watertightness - Classification
- EVS-EN 12210:2000 Windows and doors - Resistance to wind load - Classification
- EVS-EN 12211:2000 Windows and doors - Resistance to wind load - Test method
- EVS-EN 12216:2002 Shutters, external blinds, internal blinds - Terminology, glossary
and definitions
- EVS-EN 12219:2000 Doors - Climatic influenses - Requirements and classification
- EVS-EN 12400:2003 Windows and pedestrian doors – Mechanical durability –
Requirements and classification
- EVS-EN 12412-2:2003 Thermal performance of windows, doors and shutters –
Determination of thermal transmittance by hot box method – Part 2: Frames
- EVS-EN 12412-4:2003 Thermal performance of windows, doors and shutters –
Determination of thermal transmittance by hot box method – Part 4: Roller shutter boxes
- EVS-EN 12424:2000 Industrial, commercial and garage doors and gates - Resistance to
wind load - Classification
- EVS-EN 12425:2000 Industrial, commercial and garage doors and gates - Resistance to
water penetration - Classification
- EVS-EN 12426:2000 Industrial, commercial and garage doors and gates - Air
permeability -Classification
- EVS-EN 12427:2000 Industrial, commercial and garage doors and gates - Air
permeability - Test method
- EVS-EN 12428:2000 Industrial, commercial and garage doors and gates - Thermal
transmittance - Requirements for the calculation
- EVS-EN 12433-1:2000 Industrial, commercial and garage doors and gates -
Terminology - Part 1: Types of doors
- EVS-EN 12433-2:2000 Industrial, commercial and garage doors and gates -
Terminology - Part 2: Parts of doors
- EVS-EN 12444:2001 Industrial, commercial and garage doors and gates - Restance to
wind load - Testing and calculation
- EVS-EN 12445:2001 Industrial, commercial and garage doors and gates - Safety in use
for power operated doors - Testing methods
- EVS-EN 12453:2001 Industrial, commercial and garage doors and gates - Safety in use
of power operated doors - Requirements
- EVS-EN 12489:2000 Industrial, commercial and garage doors and gates - Resistance to
water penetration - Test method
- EVS-EN 12604:2000 Industrial, commercial and garage doors and gates - Mechanical
Aspects - Requirements
- EVS-EN 12605:2000 Industrial, commercial and garage doors and gates - Mechanical
aspects - Test Methods
- EVS-EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the
fabrication of windows and doors – Classification, requirements and test methods
- EVS-EN 12635:2002 Tööstus-, kommerts- ja garaaþiuksed ja -väravad. Nõuded
paigaldamiseks ja kasutamiseks
Industrial, commercial and garage doors and gates - Requirements for installation and
use
- EVS-EN 12825:2002 Raised access floors
- EVS-EN 12833:2001 Skylight and conservatory roller shutters - Resistance to snow
load - Test method
- EVS-EN 12835:2001 Airtight shutters - Air permeability test
- EVS-EN 12978:2003 Industrial, commercial and garage doors and gates – Safety
devices for power operated doors and gates – Requirements and test methods
- EVS-EN 129:2003 Methods of testing doors
- EVS-EN 130:2003 Methods of testing doors; Test for the change in stiffness of the
doors leaves by repeated torsion
- EVS-EN 13049:2003 Windows – Soft and heavy body impact – Test method, safety
requirements and classification
- EVS-EN 13051:2002 Curtain walling – Watertightness – Site test
- EVS-EN 13084-1:2001 Free-standing industrial chimneys – Part 1: General
requirements
- EVS-EN 13084-2:2002 Free-standing chimneys – Part 2: Concrete chimneys
- EVS-EN 13084-4:2002 Free-standing industrial chimneys – Part 4: Brick liners –
Design and execution
- EVS-EN 13115:2002 Windows - Classification of mechanical properties - Racking,
torsion and operating forces
- EVS-EN 13116:2002 Curtain walling – Resistance to wind load – Performance
requirements
- EVS-EN 13123-1:2001 Windows, doors and shutters - Explosion resistance -
Requirements and classification - Part 1: Shock tube
- EVS-EN 13124-1:2001 Windows, doors and shutters - Explosion resistance - Test
method - Part 1: Shock tube
- EVS-EN 13125:2001 Shutters and blinds - Additional thermal resistance - Allocation
of a class of air permeability to a product
- EVS-EN 13213:2001 Hollow floors
-EVS-EN 13241-1:2003 Industrial, commercial and garage doors and gates – Product
standard – Part 1: Products without fire resistance or smoke control characteristics
- EVS-EN 13318:2000 Screed material and floor screeds - Definitions
- EVS-EN 13330:2003 Shutters – Hard body impact – Test method
- EVS-EN 13384-1: 2003 Chimneys – Thermal and fluid dynamic calculation methods –
Part 1: Chimneys serving one appliance
- EVS-EN 13384-2: 2003 Chimneys – Thermal and fluid dynamic calculation methods –
Part 2: Chimneys serving more than one heating appliance
- EVS-EN 13502:2003 Chimneys – Requirements and test methods for clay/ceramic flue
tarminals
- EVS-EN 13527:2000 Shutters and blinds - Measurement of operating force - Test
methods
- EVS-EN 1364-3:2003 Fire resistance tests for non- loadbearing elements – Part 3:
Curtain walling – Full configuration ( complete assembly)
- EVS-EN 1443:2003 Chimneys – General requirements
- EVS-EN 1457:1999 Chimneys -Clay/Ceramic Flue Liners - Requirements and test
methods
- EVS-EN 1457:1999/A1:2003 Chimneys -Clay/Ceramic Flue Liners - Requirements and
test methods
- EVS-EN 1462:2002 Räästarennikonksud. Nõuded ja katsetamine
Brackets for eaves gutters - Requirements and testing
- EVS-EN 1522:2001 Windows, doors, shutters and blinds - Bullet resistance -
Requirements and classification
- EVS-EN 1523:2001 Windows, doors, shutters and blinds - Bullet resistance - Test
method
- EVS-EN 1529:2000 Door leaves - Height, width, thickness and squareness - Tolerance
classes
- EVS-EN 1530:2000 Door leaves - General and local flatness - Tolerance classes
- EVS-EN 1806:2000 Chimneys - Clay/ceramic flue blocks for single wall chimneys
- EVS-EN 1856-1:2003 Chimneys – Requirements for metal chimneys – Part 1: System
chimneys products
- EVS-EN 1857:2003 Chimneys – Components – Concrete flue liners
- ESV-EN 1858:2003 Chimneys – Components – Concrete flue blocks
- EVS-EN 1859:2000 Chimneys - Metal Chimneys - Test Methods
- EVS-EN 1932:2001 External blinds and shutters - Resistance to wind loads - Methods
of testing
- EVS-EN 477:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication
of windows and doors – Determination of the resistance to impact of main profiles by
falling mass
- EVS-EN 478:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication
of windows and doors – Appearance after exposure at 150 C – Test method
- EVS-EN 479:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication
of windows and doors – Determination of heat reversion
- EVS-EN 491:2002 Betoonist rea- ja erikatusekivid. Teimimeetodid
Concrete roofing tiles and fittings - Test methods
- EVS-EN 501:1999 Plekist katusekattematerjalid. Tsinkplekist katusekattematerjalide
spetsifikaat
Roofing products from metal sheet - Specification for fully supported roofing products
of zinc sheet
- EVS-EN 502:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of stainless steel sheet
- EVS-EN 504:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of copper sheet
- EVS-EN 505:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of steel sheet
- EVS-EN 506:2001 Roofing products from metal sheet - Specification for self-
supporting products of copper or zinc sheet
- EVS-EN 507:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of aluminium sheet
- EVS-EN 508-1:2001 Roofing products from metal sheet - Specification for self-
supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
- EVS-EN 508-2:2001 Roofing products from metal sheet -Specification of self-
supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
- EVS-EN 508-3:2001 Roofing products from metal sheet - Specification for self-
supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
- EVS-EN 516:2002 Katuse valmistarvikud. Juurdepääsupaigaldised. Katusesillad,
astmelaiud ja astmed
Prefabricated accessories for roofing - Installations for roof access - Walkways, treads
and steps
- EVS-EN 517:2002 Katuse valmistarvikud. Katuse turvakonksud
Prefabricated accessories for roofing - Roof safety hooks
- EVS-EN 538:2002 Savikatusekivid ülekattega laotistele. Paindetugevusteim
Clay roofing tiles for discontinuous laying - Flexural strength test
- EVS-EN 539-1:2002 Savikatusekivid ülekattega laotistele. Füüsikaliste näitajate
määramine. Osa 1: Veepidavusteim
Clay roofing tiles for discontinuous laying - Determination of physical characteristics -
Part 1: Impermeability test
- EVS-EN 60335-2-83:2003 Household and similar electrical appliances – Safety – Part
2-83: Particular requirements for heated gullies for roof drainage
- EVS-EN 60335-2-97:2002 Safety of household and similar electrical appliances –
Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds
and similar equipment
- EVS-EN 607:1999 Plastifitseerimata polüvinüülkloriidist räästarennid ja liitmikud.
Määratlused, nõuded ja katsetamine
Eaves gutters and fittings from PVC-U - Definitions, requirements and testing
- EVS-EN 612:1999 Plekist räästarennid ja vihmaveetorud. Määratlused, liigitus ja
nõuded
Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classifications and
requirements
- EVS-EN 845-1:2001 Specification for ancillary components for masonry - Part 1: Ties,
tension straps, hangers and brackets
- EVS-EN 845-2:2001 Specification for ancillary components for masonry - Part 2:
Lintels
- EVS-EN 845-3:2001 Specification for ancillary components for masonry - Part 3: Bed
joint reinforcement of steel meshwork
- EVS-EN 846-2:2000 Methods of test for ancillary components for masonry - Part 2:
Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
- EVS-EN 846-3:2000 Methods of test for ancillary components for masonry - Part 3:
Determination of shear load capacity of welds in prefabricated bed joint reinforcement
- EVS-EN 846-5:2000 Methods of test for ancillary components for masonry - Part 5:
Determination of tensile and compressive load capacity and load displacement
characteristics of wall ties (couple test)
- EVS-EN 846-6:2000 Methods of test for ancillary components for masonry - Part 6:
Determination of tensile and compressive load capacity and load displacement
characteristics of wall ties (single and test)
- EVS-EN 846-7:2000 Methods of test for ancillary components for masonry - Part 7:
Determination of shear load capacity and load displacement characteristics of shear ties
and slip ties (couplet test for mortar joint connections)
- EVS-EN 846-8:2000 Methods of test for ancillary components for masonry - Part 8:
Determination of load capacity and load-deflection characteristics of joist hangers
- EVS-EN 846-9:2000 Methods of test for ancillary components for masonry - Part 9:
Determination of flexural resistance and shear resistance of lintels
- EVS-EN 846-10:2000 Methods of test for ancillary components for masonry - Part 10:
Determination of load capacity and load deflection characteristics of brackets
- EVS-EN 846-11:2000 Methods of test for ancillary components for masonry - Part 11:
Determination of dimensions and bow of lintels
- EVS-EN 947:2001 Hinged or pivoted doors - Determination of the resistance to vertical
load
- EVS-EN 948:2000 Hinged or pivoted doors - Determination of the resistance to static
torsion
- EVS-EN 949:1999 Windows and curtain walling, doors, blinds and shutters -
Determination of the resistance to soft and heavy body impact for doors
- EVS-EN 950:2000 Door leaves - Determination of the resistance to hard body impact
- EVS-EN 951:2003 Door leaves – Method for measurement of height, width, thickness
and squareness
- EVS-EN 952:2000 Door leaves - General and local flatness - Measurement method
- EVS-EN ISO 10077-1:2000 Thermal performance of windows, doors and shutters -
Calculation of thermal transmittance - Part 1: Simplified method
- EVS-EN ISO 12567-1:2001 Thermal performance of windows and doors -
Determination of thermal transmittance by hot box method - Part 1: Complete windows
and doors

1.4.1 Ehituselemendid üldiselt
Elements of buildings in general

1.4.2 Seinad. Vaheseinad. Fassaadid
Walls. Partitions. Facades
- EVS-EN 12114:2000 Thermal performance of buildings - Air permeability of building
components and building elements - Laboratory test method
- EVS-EN 12152:2002 Curtain walling - Air permeability - Performance requirements
and classification
- EVS-EN 12153:2000 Curtain walling - Air permeability - Test method
- EVS-EN 12154:2000 Curtain walling - Watertightness - Performance requirements and
classification
- EVS-EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static
pressure
- EVS-EN 12179:2000 Curtain walling - Resistance to wind load - Test Method
- EVS-EN 13051:2002 Curtain walling – Watertightness – Site test
- EVS-EN 13116:2002 Curtain walling – Resistance to wind load – Performance
requirements
- EVS-EN 845-1:2001 Specification for ancillary components for masonry - Part 1: Ties,
tension straps, hangers and brackets
- EVS-EN 845-2:2001 Specification for ancillary components for masonry - Part 2:
Lintels
- EVS-EN 845-3:2001 Specification for ancillary components for masonry - Part 3: Bed
joint reinforcement of steel meshwork
- EVS-EN 846-2:2000 Methods of test for ancillary components for masonry - Part 2:
Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
- EVS-EN 846-3:2000 Methods of test for ancillary components for masonry - Part 3:
Determination of shear load capacity of welds in prefabricated bed joint reinforcement
- EVS-EN 846-5:2000 Methods of test for ancillary components for masonry - Part 5:
Determination of tensile and compressive load capacity and load displacement
characteristics of wall ties (couple test)
- EVS-EN 846-6:2000 Methods of test for ancillary components for masonry - Part 6:
Determination of tensile and compressive load capacity and load displacement
characteristics of wall ties (single and test)
- EVS-EN 846-7:2000 Methods of test for ancillary components for masonry - Part 7:
Determination of shear load capacity and load displacement characteristics of shear ties
and slip ties (couplet test for mortar joint connections)
- EVS-EN 846-8:2000 Methods of test for ancillary components for masonry - Part 8:
Determination of load capacity and load-deflection characteristics of joist hangers
- EVS-EN 846-9:2000 Methods of test for ancillary components for masonry - Part 9:
Determination of flexural resistance and shear resistance of lintels
- EVS-EN 846-10:2000 Methods of test for ancillary components for masonry - Part 10:
Determination of load capacity and load deflection characteristics of brackets
- EVS-EN 846-11:2000 Methods of test for ancillary components for masonry - Part 11:
Determination of dimensions and bow of lintels

1.4.3 Katused
Roofs
- EVS-EN 491:2002 Betoonist rea- ja erikatusekivid. Teimimeetodid
Concrete roofing tiles and fittings - Test methods
- EVS-EN 501:1999 Plekist katusekattematerjalid. Tsinkplekist katusekattematerjalide
spetsifikaat
Roofing products from metal sheet - Specification for fully supported roofing products
of zinc sheet
- EVS-EN 502:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of stainless steel sheet
- EVS-EN 504:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of copper sheet
- EVS-EN 505:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of steel sheet
- EVS-EN 506:2001 Roofing products from metal sheet - Specification for self-
supporting products of copper or zinc sheet
- EVS-EN 507:2000 Roofing products from metal sheet - Specification for fully
supported roofing products of aluminium sheet
- EVS-EN 508-1:2001 Roofing products from metal sheet - Specification for self-
supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
- EVS-EN 508-2:2001 Roofing products from metal sheet -Specification of self-
supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
- EVS-EN 508-3:2001 Roofing products from metal sheet - Specification for self-
supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
- EVS-EN 516:2002 Katuse valmistarvikud. Juurdepääsupaigaldised. Katusesillad,
astmelaiud ja astmed
Prefabricated accessories for roofing - Installations for roof access - Walkways, treads
and steps
- EVS-EN 517:2002 Katuse valmistarvikud. Katuse turvakonksud
Prefabricated accessories for roofing - Roof safety hooks
- EVS-EN 538:2002 Savikatusekivid ülekattega laotistele. Paindetugevusteim
Clay roofing tiles for discontinuous laying - Flexural strength test
- EVS-EN 539-1:2002 Savikatusekivid ülekattega laotistele. Füüsikaliste näitajate
määramine. Osa 1: Veepidavusteim
Clay roofing tiles for discontinuous laying - Determination of physical characteristics -
Part 1: Impermeability test
- EVS-EN 60335-2-83:2003 Household and similar electrical appliances – Safety – Part
2-83: Particular requirements for heated gullies for roof drainage
- EVS-EN 607:1999 Plastifitseerimata polüvinüülkloriidist räästarennid ja liitmikud.
Määratlused, nõuded ja katsetamine
Eaves gutters and fittings from PVC-U - Definitions, requirements and testing
- EVS-EN 612:1999 Plekist räästarennid ja vihmaveetorud. Määratlused, liigitus ja
nõuded
Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classifications and
requirements
- EVS-EN 1462:2002 Räästarennikonksud. Nõuded ja katsetamine
Brackets for eaves gutters - Requirements and testing
- EVS-EN 12056-3:2000 Gravity drainage systems inside buildings - Part 3: Roof
drainage, layout and calculation

1.4.4 Laed. Põrandad. Trepid
Ceilings. Floors. Stairs
- EVS-EN 1195:1999 Puittarindid. Katsemeetodid. Põrandalaudise toimimine
Timber structures - Test methods - Performance of structural floor decking
- EVS-EN 12825:2002 Raised access floors
- EVS-EN 13213:2001 Hollow floors
- EVS-EN 13318:2000 Screed material and floor screeds - Definitions
- EVS-EN 1364-3:2003 Fire resistance tests for non- loadbearing elements – Part 3:
Curtain walling – Full configuration ( complete assembly)

1.4.5 Korstnad, lõõrid, kanalid
Chimneys, shafts, ducts
- EVS-EN 12446:2003 Chimneys – Components – concrete outer wall elements
- EVS-EN 13084-1:2001 Free-standing industrial chimneys – Part 1: General
requirements
- EVS-EN 13084-2:2002 Free-standing chimneys – Part 2: Concrete chimneys
- EVS-EN 13084-4:2002 Free-standing industrial chimneys – Part 4: Brick liners –
Design and execution
- EVS-EN 13384-1: 2003 Chimneys – Thermal and fluid dynamic calculation methods –
Part 1: Chimneys serving one appliance
- EVS-EN 13384-2: 2003 Chimneys – Thermal and fluid dynamic calculation methods –
Part 2: Chimneys serving more than one heating appliance
- EVS-EN 13502:2003 Chimneys – Requirements and test methods for clay/ceramic flue
tarminals
- EVS-EN 1443:2003 Chimneys – General requirements
- EVS-EN 1457:1999 Chimneys -Clay/Ceramic Flue Liners - Requirements and test
methods
- EVS-EN 1457:1999/A1:2003 Chimneys -Clay/Ceramic Flue Liners - Requirements and
test methods
- EVS-EN 1806:2000 Chimneys - Clay/ceramic flue blocks for single wall chimneys
- EVS-EN 1859:2000 Chimneys - Metal Chimneys - Test Methods

1.4.6 Uksed ja aknad
Doors and windows
- EVS 836:2003 Aknad, uksed ja luugid. Sissemurdmiskindlus. Nõuded ja liigitus
Windows, doors and shutters – Burglar resistance – Requirements and classification
- EVS 849:2003 Uksed ja aknad. Terminoloogia
Doors and windows – Terminology
- EVS 852:2003 Karkassfassaad. Terminoloogia
Curtain walling – Terminology
- EVS 855:2003 Tööstus-, kommerts- ning garaaziuksed ja –väravad. Tootestandard
Industrial, commercial and garage doors and gates – Product standard
- EVS 859:2003 Aknad ja välisuksed. Tootestandard
Windows and external pedestrian doors – Product standard
- EVS-EN 947:2001 Hinged or pivoted doors - Determination of the resistance to vertical
load
- EVS-EN 948:2000 Hinged or pivoted doors - Determination of the resistance to static
torsion
- EVS-EN 949:1999 Windows and curtain walling, doors, blinds and shutters -
Determination of the resistance to soft and heavy body impact for doors
- EVS-EN 950:2000 Door leaves - Determination of the resistance to hard body impact
- EVS-EN 952:2000 Door leaves - General and local flatness - Measurement method
- EVS-EN 1026:2000 Windows and doors - Air permeability - Test method
- EVS-EN 107:2003 Methods of testing windows; Mechanical test
- EVS-EN 1027:2000 Windows and doors - Watertightness - Test method
- EVS-EN 1121:2000 Doors - Behaviour between two different climates - Test method
- EVS-EN 1191:2000 Windows and doors - Resistance to repeated opening and closing -
Test method
- EVS-EN 1192:2000 Doors - Classification of strength requirements
- EVS-EN 1294:2000 Door leaves - Determination of the behaviour under humidity
variations in successive uniform climates
- EVS-EN 1522:2001 Windows, doors, shutters and blinds - Bullet resistance -
Requirements and classification
- EVS-EN 1523:2001 Windows, doors, shutters and blinds - Bullet resistance - Test
method
- EVS-EN 1529:2000 Door leaves - Height, width, thickness and squareness - Tolerance
classes
- EVS-EN 1530:2000 Door leaves - General and local flatness - Tolerance classes
- EVS-EN 1932:2001 External blinds and shutters - Resistance to wind loads - Methods
of testing
- EVS-EN 12045:2000 Shutters and blinds power operated - Safety in use - Measurement
of the transmitted force
- EVS-EN 12046-2:2000 Operating forces - Test method - Part 2: Doors
- EVS-EN 12194:2000 Shutters, external and internal blinds - Misuse - Test methods
- EVS-EN 12207:2000 Windows and doors - Air permeability - Classification
- EVS-EN 12208:2000 Windows and doors - Watertightness - Classification
- EVS-EN 12210:2000 Windows and doors - Resistance to wind load - Classification
- EVS-EN 12211:2000 Windows and doors - Resistance to wind load - Test method
- EVS-EN 12216:2002 Shutters, external blinds, internal blinds - Terminology, glossary
and definitions
- EVS-EN 12219:2000 Doors - Climatic influenses - Requirements and classification
- EVS-EN 12400:2003 Windows and pedestrian doors – Mechanical durability –
Requirements and classification
- EVS-EN 12412-2:2003 Thermal performance of windows, doors and shutters –
Determination of thermal transmittance by hot box method – Part 2: Frames
- EVS-EN 12412-4:2003 Thermal performance of windows, doors and shutters –
Determination of thermal transmittance by hot box method – Part 4: Roller shutter boxes
- EVS-EN 12424:2000 Industrial, commercial and garage doors and gates - Resistance to
wind load - Classification
- EVS-EN 12425:2000 Industrial, commercial and garage doors and gates - Resistance to
water penetration - Classification
- EVS-EN 12426:2000 Industrial, commercial and garage doors and gates - Air
permeability -Classification
- EVS-EN 12427:2000 Industrial, commercial and garage doors and gates - Air
permeability - Test method
- EVS-EN 12428:2000 Industrial, commercial and garage doors and gates - Thermal
transmittance - Requirements for the calculation
- EVS-EN 12433-1:2000 Industrial, commercial and garage doors and gates -
Terminology - Part 1: Types of doors
- EVS-EN 12433-2:2000 Industrial, commercial and garage doors and gates -
Terminology - Part 2: Parts of doors
- EVS-EN 12444:2001 Industrial, commercial and garage doors and gates - Restance to
wind load - Testing and calculation
- EVS-EN 12445:2001 Industrial, commercial and garage doors and gates - Safety in use
for power operated doors - Testing methods
- EVS-EN 12453:2001 Industrial, commercial and garage doors and gates - Safety in use
of power operated doors - Requirements
- EVS-EN 12489:2000 Industrial, commercial and garage doors and gates - Resistance to
water penetration - Test method
- EVS-EN 12604:2000 Industrial, commercial and garage doors and gates - Mechanical
Aspects - Requirements
- EVS-EN 12605:2000 Industrial, commercial and garage doors and gates - Mechanical
aspects - Test Methods
- EVS-EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the
fabrication of windows and doors – Classification, requirements and test methods
- EVS-EN 12635:2002 Tööstus-, kommerts- ja garaaþiuksed ja -väravad. Nõuded
paigaldamiseks ja kasutamiseks
Industrial, commercial and garage doors and gates - Requirements for installation and
use
- EVS-EN 12833:2001 Skylight and conservatory roller shutters - Resistance to snow
load - Test method
- EVS-EN 12835:2001 Airtight shutters - Air permeability test
- EVS-EN 12978:2003 Industrial, commercial and garage doors and gates – Safety
devices for power operated doors and gates – Requirements and test methods
- EVS-EN 129:2003 Methods of testing doors
- EVS-EN 13049:2003 Windows – Soft and heavy body impact – Test method, safety
requirements and classification
- EVS-EN 130:2003 Methods of testing doors; Test for the change in stiffness of the
doors leaves by repeated torsion
- EVS-EN 13115:2002 Windows - Classification of mechanical properties - Racking,
torsion and operating forces
- EVS-EN 13123-1:2001 Windows, doors and shutters - Explosion resistance -
Requirements and classification - Part 1: Shock tube
- EVS-EN 13124-1:2001 Windows, doors and shutters - Explosion resistance - Test
method - Part 1: Shock tube
- EVS-EN 13125:2001 Shutters and blinds - Additional thermal resistance - Allocation
of a class of air permeability to a product
- EVS-EN 13330:2003 Shutters – Hard body impact – Test method
- EVS-EN 13527:2000 Shutters and blinds - Measurement of operating force - Test
methods
- EVS-EN 1522:2001 Windows, doors, shutters and blinds - Bullet resistance -
Requirements and classification
- EVS-EN 1523:2001 Windows, doors, shutters and blinds - Bullet resistance - Test
method
- EVS-EN 1529:2000 Door leaves - Height, width, thickness and squareness - Tolerance
classes
- EVS-EN 1530:2000 Door leaves - General and local flatness - Tolerance classes
- EVS-EN 1532:2001 External blinds and shutters – Resistance to wind loads – Method
of testing
- EVS-EN 477:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication
of windows and doors – Determination of the resistance to impact of main pro files by
falling mass
- EVS-EN 478:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication
of windows and doors – Appearance after exposure at 150 C – Test method
- EVS-EN 479:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication
of windows and doors – Determination of heat reversion
- EVS-EN 60335-2-97:2002 Safety of household and similar electrical appliances - Part
2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar
equipment
- EVS-EN 947:2001 Hinged or pivoted doors - Determination of the resistance to vertical
load
- EVS-EN 948:2000 Hinged or pivoted doors - Determination of the resistance to static
torsion
- EVS-EN 949:1999 Windows and curtain walling, doors, blinds and shutters -
Determination of the resistance to soft and heavy body impact for doors
- EVS-EN 950:2000 Door leaves - Determination of the resistance to hard body impact
- EVS-EN 951:2003 Door leaves – Method for measurement of height, width, thickness
and squareness
- EVS-EN 952:2000 Door leaves - General and local flatness - Measurement method
- EVS-EN ISO 10077-1:2000 Thermal performance of windows, doors and shutters -
Calculation of thermal transmittance - Part 1: Simplified method
- EVS-EN ISO 12567-1:2001 Thermal performance of windows and doors -
Determination of thermal transmittance by hot box method - Part 1: Complete windows
and doors

1.4.7 Muud ehituselemendid
Other elements of buildings

								
To top