Japan International SAMPE Symposium Exhibition JISSE Nov Dec Think

9th Japan International SAMPE Symposium & Exhibition JISSE-9 (Nov.29-Dec.2, 2005) “Think globally, act compositive.” Full Program for Print PROGRAM AT A GLANCE SESSIONS & SEMINEARS Room No. 11/29 Tue. 9:30-11:10 11:20-11:30 11:30-12:30 13:30-14:50 15:00-16:00 16:00-17:00 11/30 Wed. 9:00-11:20 11:30-12:30 13:30-14:50 15:00-16:00 16:00-17:00 12/1 Thu. 9:00-11:20 11:30-12:30 13:30-15:10 15:15-17:45 18:00-20:00 12/2 Fri. 9:00-10:40 10:50-12:30 13:30-15:10 15:20-17:00 S8-1 NDE Greeting (Room 605) PL1 (Room 605): Bruno Beral (Airbus) S8-2 NDE S3-2 New Mat. Spons ored Session SIT S2-2 Aerospace S1-2 Trans port 605 S3-1 New Mat. 606 607 Spons ored Session SIT S2-1 Aerospace 608 609 S1-1 Trans port 610 CAE tutorial se minars 604 9:00-12:30 603 9:00-12:30 PAM-RTM 13:30-17:00 13:30-17:00 PL2 (Room 605): Mark D. Jenks (Boeing) SEL1 (Room 605): Tia Bens on Tolle (President, SAMPE International, AFRL) S8-3 NDE S3-3 New Mat. S4-1 PMC Sponsored Sess ion JAXA Sponsored Sess ion SIT S1-3 Trans port LS-DYNA 9:00-12:30 SEER-DFM 9:00-12:30 PL3 (Room 605): Byung-Lip Lee (AFRL/AFOSR) S8-4 NDE S3-4 New Mat. S4-2 PMC S2-3 Aerospace S1-4 Trans port VOXELCON 13:30-17:00 CATIA-CAD 13:30-17:00 SEL2 (Room 605): Klaus Drechsler (Univ. of Stuttgart Inst. of Aircraft Des ign) SEL3 (Room 605): Scott Beckwith (SAMPE International Technical Director, President, BTG Composites LLC S8-5 NDE S3-5 New Mat. S4-3 PMC Sponsored Sess ion KIT S5-1 MMC/CMC S6-1 CAE MAESTRO 9:00-12:30 CATIACPD/FEM 9:00-12:30 PL4 (Room 605): Koichi Abe (Toray) S8-6 NDE S3-6 New Mat. S4-4 PMC S7-1 Application S5-2 MMC/CMC S6-2 CAE LAMINATE TOOLS 13:30-17:00 CATIA-CAD 13:30-17:00 Market Trend Panel (Room 605) Banquet(Restaurant New Tokyo) S8-7 NDE S8-8 NDE S8-9 NDE 10:30-12:30 Special Tutorial A 13:30-15:30 Special Tutorial B S4-5 PMC S4-6 PMC S7-2 Application S7-3 Application S7-4 Application S5-3 MMC/CMC S5-4 MMC/CMC S5-5 MMC/CMC S6-3 CAE S6-4 CAE S6-5 CAE GENOA 9:00-12:30 CATIACPD/FEM 9:00-12:30 MARC 13:30-17:00 PRO/E-CAD 13:30-17:00 HYPERSIZER RTM-WORX Tuesday Morning (29th November) 605 Measurement & Nondestructive Evaluation 1 Moderator: Tsuyoshi Ozaki (Mitsubishi Electric Corporation) S8-01 (9:30-9:50) Damage monitoring on CFRP aircraft bonding structure using FBG/PZT hybrid system Toshimichi Ogisu, Masakazu Shimanuki, Hiroshi Yoneda (Fuji Heavy Industries Ltd.), Yoji Okabe, Nobuo Takeda (The Univ. of Tokyo) and Tateo Sakurai (RIMCOF) P-1 607 Academic Summit Workshop : SIT Special Summit Session 1 608 Aerospace and Marine Structures 1 Moderator: Mikine Yoshida (MHI) S2-01 (9:30-9:50) Outline of National Project on Advanced Materials & Process Development for Next Generation Aircraft Structures Mamoru Imuta and Yasuhiro Yamaguchi (RIMCOF) 606 New Materials and Fabrication Technology 1 609 610 Automobile and Ground Transportation 1 Moderator: Kanemasa Nomaguchi (Plastic Lining Association) S1-01 (9:30-9:50) Effect of Automobile Lightening by CFRP on the World Energy Saving Ryusuke Shida, Koji Tsumuraya (The Univ. of Tokyo), Shiki Nakatsuka (MRI) and Jun Takahashi (The Univ. of Tokyo) Moderator: Moderator: Nobuo Ikuta (Shonan Inst. of Tech.), T. Tanimoto (Shonan Inst. of Tech., Satoshi Kobayashi (Tokyo Metropolitan Japan) Univ.) Opening Ceremony (9:30-9:50) S3-01 (9:30-9:50) Evaluation of Residual Burst Strength of Address: Eitaro Itoyama (Chancellor, FW-Hybrid FRP Composite Pipes after Shonan Inst. of Tech., Japan) Impact Loading Satoshi Kobayashi, Kazuo Ikeda, Shuichi Wakayama (Tokyo Metropolitan Univ.) and Takayuki Matsumoto (Nippon Oil Company) S8-02 (9:50-10:10) S3-02 (9:50-10:10) Moderator: Small-diameter FBG sensor system for Time Dependence on Interfacial Shear K. Uchino (Pennsylvania State Univ., damage detection in composite materials Strength of Glass Fiber / Thermoplastics in USA) Microdroplet Seiji Kojima, Shinji Komatsuzaki, and Hongo Akihito (Hitachi Cable, Ltd.), Nobuo Akihiro Ohnishi (Perkin-Elmer Japan), SIT-01 (9:50-10:10) Fumiyasu Funami and Nobuo Ikuta (Shonan Manufacturing Aspects of Thermoplastic Takeda (The Univ. of Tokyo) and Tateo Inst. of Tech.) Sakurai (RIMCOF) Composite Components K. Friedrich (Univ. of Kaiserslautern, Germany) S8-03 (10:10-10:30) The detection of debonding in the skinstringer structure using FBG sensor as the lamb wave receiver Junichiro Kuwahara, Kazuki Natori, Yoji Okabe, Nobuo Takeda (The Univ. of Tokyo), Toshimichi Ogisu (Fuji Heavy Industries Ltd.), and Seiji Kojima (Hitachi Cable, Ltd.) S8-04 (10:30-10:50) Impact damage monitoring of composite plates using fiber Bragg grating ultrasonic sensors Hiroshi Tsuda and Jung-Ryul Lee (AIST) S3-03 (10:10-10:30) A-VaRTM material and fabrication process for aircraft primary structures Hiroshi Odani, Yasuo Suga, Nobuo Asahara, Kenich Yoshioka, Eisuke Wadahara (Toray Industries, Inc.), Shigeru Nishiyama and Fumihito Takeda (Mitsubishi Heavy Industries, Ltd.) S3-04 (10:30-10:50) Development of the structural phenolic composite by injection molding with preform Toshiichi Tanno and Goichi Ben (Nihon Univ.) S3-05 (10:50-11:10) Pultlusion technique and evaluation of sandwich beam which used phenol foam composite as core Mitsuru Soma, Akio Shoji and Goichi Ben (Nihon Univ.) SIT-02 (10:10-10:30) Shear Modulus and Limiting Shear Stress of an Elastohydrodynamic Oil Film M. Muraki and R. Kawabata (Shonan Inst. of Tech., Japan) S2-02 (9:50-10:10) Development of Aircraft Composite Structures by UV-curing Process Technologies Koichi Hasegawa, Hiroshi Mizuno, Hideki Horizono (MHI) and Yasuhiro Yamaguchi (RIMCOF) S1-02 (9:50-10:10) Prediction of energy intensity of carbon fiber reinforced plastics for mass-produced passenger cars Tetsuya Suzuki and Jun Takahashi (The Univ. of Tokyo) S2-03 (10:10-10:30) Development of Electron Beam Processing for Aircraft Structures Jun Gotoh, Mitsuyasu Yoda (KHI), Yasuyuki Yokoe (Toho Tenax Co., Ltd), Hideo Tokonabe (JAMCO Corporation), Taketomi Shakudo (Nuclear Fuel Industries, LTD) and Mamoru Imuta (RIMCOF) S2-04 (10:30-10:50) Evaluation of Long-term durability based on accelarated testing for CFRP with chemical structure change Masayuki Nakada (Kanazawa Inst. of Tech.), Hideki Horizono (MHI) and Yasushi Miyano (Kanazawa Inst. of Tech.) S2-05 (10:50-11:10) Development of Acrylate Resin for CFRP Manabu Kaneko, Kazuki Koga, Yohei Miwa, Masahiro Sugimori (Mitsubishi Rayon Co., Ltd.) and Yasuhiro Yamaguchi (RIMCOF) S1-03 (10:10-10:30) Proposal of a local circulation bus made by CFRP Michitaka Yamamoto (The Univ. of Tokyo), Mitsuharu Kan (Honda Motor Limited), Kiyoshi Uzawa and Jun Takahashi (The Univ. of Tokyo) SIT-03 (10:30-10:50) Effect of Ultrasonic Agitation on the Electrical Resistivity and Viscosity of a Liquid Epoxy Resin Containing Carbon Nanotubes C. E. Bakis and S. R. Spinder-Ranta (The Pennsylvania State Univ., USA) SIT-04 (10:50-11:10) The Location of Clay and Its Role on the Fracture Mechanisms under Static and Dynamic Loading Conditions in Nylon 66Based Ternary Nanocomposites A. Dasari, Z. Z. Yu and Y. W. Mai (The Univ. of Sydney, Australia) S1-04 (10:30-10:50) Fatigue Behavior of Unidirectional Carbon Fiber Reinforced Polypropylene Hiroaki Zushi, Isamu Ohsawa, Makoto Kanai, Kiyoshi Uzawa and Jun Takahashi (The Univ. of Tokyo) S8-05 (10:50-11:10) Airplane structure health monitoring using Brillouin distributed measuring method Takashi Yari, Masahito Ishioka, Kanehiro Nagai (Mitsubishi Heavy Industries, co.) and Tateo Sakurai (RIMCOF) Break Greeting Plenary Lecture 1 : Room 605 Structural Technology Development at Airbus - The A350 and beyond Bruno Beral (Head of Airbus Structures Research & Technologies, Airbus) Moderator: Nobuo Takeda (The Univ. of Tokyo) Lunch Tuesday Afternoon (29th November) 605 Measurement & Nondestructive Evaluation 2 Moderator : Hiroshi Tsuda (AIST) P-2 607 Academic Summit Workshop : SIT Special Summit Session 2 Moderator: K. Friedrich (Technical Univ. of Kaiserslautern, Germany) SIT-05 (13:30-13:50) Energy Harvesting with Flexible Piezoelectric Composites H. Kim, K. Uchino (The Pennsylvania State Univ., USA) and T. Daue (Smart Material Corporation, USA) 606 New Materials and Fabrication Technology 2 Moderator : Goichi Ben (Nihon Univ.) 608 Aerospace and Marine Structures 2 Moderator: Mamoru Imuta (RIMCOF) S2-07 (13:30-13:50) Experimental evaluation for mechanical properties of Zanchor CFRP laminates Yutaka Iwahori (JAXA), Masayasu Ishibashi (Shikibo Ltd.), Fumihito Takeda ( ), Yosuke Nagao, Takashi Ishikawa (JAXA) 609 610 Automobile and Ground Transportation 2 Moderator: Junich Kasai (NIMS) S1-05 (13:30-13:50) An Overview of Composites Recycling Shinya Hayashi (NMRI) and Kanemasa Nomaguchi (Plastic Lining Association) S3-06 (13:40-14:00) S8-06 (13:30-13:50) Damage tolerant design of Highly Reliable Deep Drawing of FRTP Sheet Using Multiaxial Laminated Prepreg Tape Advanced Grid Structures Tsuyoshi Ozaki, Hajime Takeya (Mitsubishi Tsutao Katayama, Kazuto Tanaka Electric Corporation), Nobuo Takeda, Yoji (Doshisha Univ.), Yasunori Nakamura (Osaka Sangyo Univ.), Kazutaka Uno Okabe, Masataro Amano (The Univ. of (Marubeni Intex Co., Ltd.), Masachika Tokyo) and Naoyuki Tajima (RIMCOF) Yamane (Toyobo Co., Ltd.) and Toshiki Murakami (Doshisha Univ.) S8-07 (13:50-14:10) S3-07 (14:00-14:20) FBG wavelength arrangement in Highly Press Molding of Wool Powder to Produce Reliable Advanced Grid Structure Thermosetting Bio-resin Hajime Takeya, Tsuyoshi Ozaki (Mitsubishi Nobuo Ikuta, Naoki Aihara, Fumihiko Electric Corporation), Nobuo Takeda (The Funami (Shonan Inst. of Tech.), Akihiro Univ. of Tokyo) and Naoyuki Tajima Ohnishi (Perkin-Elmer Japan), and Joichi (RIMCOF) Koga (Kyoto Women’s Univ.) SIT-06 (13:50-14:10) Analysis of Pultrusion Process of Phenolic Foam Composites M. S. Yun and W. I. Lee (Seoul National Univ., Korea) S2-08 (13:50-14:10) Reliability analysis for proof load testing of large scale structural systems Seiichi Ito, Takao Okada (JAXA) and Wang Bintuan (AVIC-I) S1-06 (13:50-14:10) Composites Recycling Using Depolymerizing Thermosets under Ordinary Pressure Katsuji Shibata, Kazunobu Maekawa and Masahito Kitajima (Hitachi Chemical Co., Ltd.) S8-08 (14:10-14:30) Identification of damage location in composite grid structures with embedded fiber Bragg grating sensors Masataro Amano, Yoji Okabe, Nobuo Takeda (The Univ. of Tokyo) and Tsuyoshi Ozaki (Mitsubishi Electric Corporation) Invited Paper: S3-08 (14:20-14:50) Analysis and Simulation of Liquid Molding Processes for Composite Materials Doh Hoon Lee and Woo Il Lee (Seoul National Univ.) SIT-07 (14:10-14:30) Development of Biodegradable Fiber Reinforced Plastics T. Tanimoto, T. Wittek and K. Sumita (Shonan Inst. of Tech., Japan) S2-09 (14:10-14:30) Opportunities Offered by an Integrated PLM Environment for Digital Composite Design Luc JAMMES and Wen-Jun HE (Dassault Syst?mes K.K.) S1-07 (14:10-14:30) Recycle of Carbon Fiber Reinforced Plastics for Automotive Application Ryohei Fukui (The Univ. of Tokyo), Tatsuya Odai (NS Solutions Corporation), Hiroaki Zushi, Isamu Osawa, Kiyoshi Uzawa and Jun Takahashi (The Univ. of Tokyo) S1-08 (14:30-14:50) Evaluation of Recycled CFRTP for Mass Production Applications Nobukuni Matsutsuka, Jun Takahashi, Hiroaki Zushi, Isamu Osawa and Kiyoshi Uzawa (The Univ. of Tokyo) S8-09 (14:30-14:50) Cure monitoring of epoxy resin by Raman spectroscopy with optical fibers Tatsuro Kosaka, Katsuhiko Osaka, Yoshihiro Sawada (Osaka City Univ.) and Yasuhiro Yamaguchi (RIMCOF) SIT-08 (14:30-14:50) Study on In-Situ Synthesized Titanium Matrix Composites D. Zhang, W. J. Lu, J. N. Qin, R. J. Wu and G. D. Zhang (Shanghai Jiao Tong Univ., P. R. China) Break Plenary Lecture 2 : Room 605 Boeing's 787 and the Future of Material & Processes for Commercial Aircraft Structures Mark D. Jenks (Boeing Company) Moderator: Kazuaki Amaoka (FHI) Special Evening Lectures 1 : Room 605 Nanocomposites...Small Things Offer Big Opportunity Tia Benson Tolle (President, SAMPE International, AFRL) Moderator: Toshio Tanimoto (Shonan Inst. of Tech.) Wednesday Morning (30th November) 605 Measurement & Nondestructive Evaluation 3 Moderator: C. G. Kim (KAIST), Akira Todoroki (Tokyo Inst. of Tech.) Invited Paper: S8-10 (9:00-9:40) Mechanical reliability of fiber Bragg gratings for strain or temperature sensor Hyuk-Jin Yoon, Sang-Oh Park and ChunGon Kim (KAIST) P-3 607 Polymer Matrix Composite (new materials) 608 Sponsored Session - JAXA 609 Academic Summit Workshop : SIT Special Summit Session 3 Moderator: Y. W. Mai (Univ. of Sydney, Australia) 606 New Materials and Fabrication Technology 3 Moderator: Masao Sumita (Tokyo Inst. Tech.), Tohru Morii Shonan Inst. of Tech.) S3-09 (9:00-9:20) Ionic Conduction in Solid Polymer Electrolytes under Subcritical and Supercritical Carbon Dioxide Yoichi Tominaga, Shigeo Asai and Masao Sumita (Tokyo Inst. of Tech.) S3-10 (9:20-9:40) The effect of CO2 treatment on the crystallization behavior of poly (L-lactide) film Yukihiro Ikura, Shin-ichi Hirota, Yoichi Tominaga, Shigeo Asai and Masao Sumita (Tokyo Inst. of Tech.) 610 Automobile and Ground Transportation 3 Moderator: Naoto Mifune (RTRI), Jun Takahashi (The Universiity of Tokyo) Moderator: Moderator: Shinji Ogihara (Tokyo Univ. of Science) Hiroshi Hatta (JAXA) S4-01 (9:00-9:20) Resistivity Control of Carbon Black Filled Polymer Composite Using Supercritical Carbon Dioxide Yose Fachmi Buys, Takehiko Aoyama, Yoichi Tominaga, Shigeo Asai and Masao Sumita (Tokyo Inst. of Tech.) JAXA-01 (9:00-9:20) Low-Cost Composite Manufacturing Technology Development Program in JAXA Yosuke Nagao, Toshiya Nakamura, Jiro Nakamichi and Takashi Ishikawa (JAXA) JAXA-02 (9:20-9:40) S4-02 (9:20-9:40) Evaluation of Mechanical Properties of The effect of CO2 treatment on the Corrugated CFRP for Variable Wing crystallization behavior and electrical Structures properties of poly (L-lactide) / carbon black composites Tomohiro Yokozeki, Shinichi Takeda, Takehiko Aoyama, Yoichi Tominaga, Toshio Ogasawara and Takashi Ishikawa Shigeo Asai and Masao Sumita (Tokyo Inst. (JAXA) of Tech.) S4-03 (9:40-10:00) The Study of Modification with Montmorillonite Nanomaterial for Polyurethane Wo Ding Zhu (Nanjing Univ.) JAXA-03 (9:40-10:00) Nondestructive Evaluation of Composites Using Pulsed Thermography Sunao Sugimoto,Toshio Ogasawara, Yuichiro Aoki, and Takashi Ishikawa (JAXA) SIT-09 (9:00-9:20) Prediction of Mechanical Properties of Multiaxial Hybrid Textile Composites Invited Paper: T. J. Kang, K. Chung, K. Joo, J. H. Kim and S1-09 (9:00-9:40) The TECABS project: development of H. Ryou (Seoul National Univ., Korea) manufacturing, simulation and design technologies for a carbon fibre composite car Ignaas Verpoest, Truong Chi Thanh, SIT-10 (9:20-9:40) Toughening and Stiffening of Nylon 6 with Stepan Lomov (Katholieke Universiteit Organoclay and Rubber Leuven) S. H. Lim, A. Dasari, G. T. Wang, Z. Z. Yu and Y. W. Mai (The Univ. of Sydney, Australia) S8-11 (9:40-10:00) Reflected-light-intensity change method for cure monitoring of GFRP Akira Todoroki and Norihiko Hana (Tokyo Inst. of Tech.) S3-11 (9:40-10:00) The Effect of High-pressure Carbon Dioxide Treatment on the Crystallization Behavior and Mechanical Properties of Poly (L-lactic acid) / Poly (methyl methacrylate) Blends Shin-ichi Hirota, Takatoshi Sato, Yoichi Tominaga, Shigeo Aasi and Masao Sumita (Tokyo Inst. of Tech.) SIT-11 (9:40-10:00) Control of Rate of Solute Transport across the Poly-L-Lactic Acid (PLLA) Membrane with Polyvinylpyrroridone (PVP) A. Yamashita, H. Nagashima and T. Tashiro (Shonan Inst. of Tech., Japan) S1-10 (9:40-10:00) Cost-Effective Processing of Automotive Parts Hermann F. Seibert and Leonhard Maier (R öhm GmbH&Co.KG) S8-12 (10:00-10:20) Frequency Characteristic of Fiber-Optic DEFEW Strain Rate Sensor for Industrial Applications Yoshiaki Akematsu, Kazuro Kageyama, Hideaki Murayama, Isamu Ohsawa, Kiyoshi Uzawa, Makoto Kanai and Sakura Atsuta (The Univ. of Tokyo) S8-13 (10:20-10:40) Smart Sandwich Structures with Damage Detection and Suppression Function using Small-diameter FBG sensors and SMA Honeycomb Core Shu Minakuchi, Nobuo Shiraishi, Ken Murakami, Yoji Okabe, Nobuo Takeda (The Univ. of Tokyo) and Tatsuro Kosaka (Osaka City Univ.) S3-12 (10:00-10:20) S4-04 (10:00-10:20) Miscibility and Hydrolytic Degradation in Carbon composite material using cationic Alkaline Solution of Binary Blends of UV-curable resins Poly (L-lactide) and Poly (methyl Hidekazu Takeyama, Kazuhiro Hatanaka, methacrylate) Yoshiaki Someya, Hiroshi Murayama (The Yoichi Komatsu, Tomoko Shirahase, Yoichi Yokohama Rubber Co., Ltd.) and Yasuhiro Tominaga, Shigeo Asai and Masao Sumita Yamaguchi (RIMCOF) (Tokyo Inst. of Tech.) S3-13 (10:20-10:40) High Water Repellent, High Adhesive Polymer Surface Motoko Kawasaki, Takashi Nishino (Kobe Univ.) and Kiyofumi Takano (Dainippon Ink and Chemicals, Inc.) S4-05 (10:20-10:40) Mechanical Properties of CF/GF Hybrid Multi-axial Warp Knitted Fabric Composite Materials Tomohoko Sugie (Kyoto Inst. of Tech.), Akira Kasuya (Kurabo Industries Ltd.), Asami Nakai and Hiroyuki Hamada (Kyoto Inst. of Tech.) JAXA-04 (10:00-10:20) Development of Novel Imide Oligomer Solution Prepregs and Polyimide / Carbon Fiber Composites Yuichi Ishida, Toshio Ogasawara and Rikio Yokota (JAXA) SIT-12 (10:00-10:20) Fabrication of Morphgenetic Hierarchical Porous Iron Oxide by Wood Templates W. Zhang, Z. T. Liu, D. Zhang, T. X. Fan, B. H. Sun, G. D. Zhang (Shanghai Jiao Tong Univ., P. R. China) and T. Tanimoto (Shonan Inst. of Tech., Japan) S1-11 (10:00-10:20) Short cycle production process of automotive body Ichiro Taketa, Akihiko Kitano and Masaaki Yamasaki (Toray Industries, Inc.) JAXA-05 (10:20-10:40) Shear Fracture Model of an Orthogonal 3D-C/C Composite Yuhsuke Yamane (Aoyama Gakuin Univ.), Takuya Aoki, Toshio Ogasawara (JAXA) and Takeshi Ogawa (Aoyama Gakuin Univ.) S1-12 (10:20-10:40) SIT-13 (10:20-10:40) Mechanism on An Unique Treatment of p- Co-cure bondhing method for structural Aramid Fiber for Interfacial Reinforcement parts of automobile in Composites Masaaki Yamasaki, Akihiko Kitano and N. Ikuta, S. Fukuda, F. Funami (Shonan Ichiro Taketa (Toray Industries, Inc.) Inst. of Tech., Japan), A. Ohnishi (Perkin Elmer Japan, Japan) and T. Kikutani (Tokyo Inst. of Tech., Japan) Wednesday Morning (30th November) 605 Measurement & Nondestructive Evaluation 3 S8-14 (10:40-11:00) Measurement of strain and vibration of plates by new fiber optic strain and vibration sensors Tatsuro Kosaka, Shogo Komatsu, Katsuhiko Osaka and Yoshihiro Sawada (Osaka City Univ.) P-4 607 Polymer Matrix Composite (new materials) S4-06 (10:40-11:00) Mechanical Evaluation of 3-Dimensional Textile Integrated Rib and Joint Takeshi Takatoya and Ippei Susuki (JAXA) 606 New Materials and Fabrication Technology 3 S3-15 (10:40-11:00) Electrical Performance of ZnO Varistor using Powders Processed by Different Latex Binders A.N. M. Karim (International Islamic Univ. Malaysia), S. Begum (Univ. Tenaga Nasional Km 7) and M. S. J Hashmi (Dublin City Univ.) 608 Sponsored Session - JAXA JAXA-06 (10:40-11:00) A Bias Factor of Weibull Estimation on a SiC Fiber of Small Gauge Length Tetsuya Morimotio (JAXA), Satoshi Nakagawa, Kouichi Kanetsuna and Shinji Ogihara (Tokyo Univ. of Science) 609 Academic Summit Workshop : SIT Special Summit Session 4 Moderator: T. Tanimoto (Shonan Inst. of Tech., Japan) Poster Session (10:40-11:20) 610 Automobile and Ground Transportation 3 S1-17 (10:40-11:00) Axial crushing behavior of braiding FRPs Yuqiu Yang, Asami Nakai (Kyoto Inst. of Tech.), Tadashi Uozumi (Murata machinery, Ltd.) and Hiroyuki Hamada (Kyoto Inst. of Tech.) S8-15 (11:00-11:20) Measurements of damage and displacement behavior of CFRP by using the Optical Fiber Sensor at impact tests Yoshiaki Akematsu, Kazuro Kageyama, Hideaki Murayama, Isamu Ohsawa, Kiyoshi Uzawa, Makoto Kanai and Satoru Akiyama (The Univ. of Tokyo) S4-07 (11:00-11:20) Sound Insulation Performance of PET Fabric/PVC Composite Materials Yaqin FU (Advanced Textile Materials and Manufacturing Tech.) and Qing-Qing NI (Shinshu Univ.) Break SIT-P01 Design and Construction of All-Composite Electrically Powered Solar-Assist Wheelchairs T. Tanimoto, Y. Seki, Y. Tachikawa and T. Wittek (Shonan Inst. of Tech., Japan) SIT-P02 Hydrogen Transport through Tungsten Phosphate Glass S. Fujitsu (Shonan Inst. of Tech., Japan) SIT-P03 Electrochemical Synthesis of Alumina Particles Dispersed Silica Coatings N. Kieda (Shonan Inst. of Tech., Japan) SIT-P04 Preparation and Properties of Pb(Mg1/3Nb2/3)O3PbTiO3 Thin Films by Chemical Solution Deposition H. Maiwa, Y. Okano (Shonan Inst. of Tech., Japan) and N. Ichinose (Waseda Univ., Japan) SIT-P05 Separation and Adsorption of Plasma Proteins with Polyester Polymer Alloy (PEPA) Membrane Including Various Amount of Polyvinylpyrroridone (PVP) A. Yamashita, N. Tomisawa and A. Takezawa (Shonan Inst. of Tech., Japan) S1-13 (11:00-11:20) SIT-P06 Non CO2 Release Heat Utilization System with High Development of CHG tanks for effective Thermal Efficiency -Thermal Hydraulics for Ultra High storage of hydrogen gas Temperature Nuclear Reactor with Pebble Type FuelTakaomi Inada, Iton Chou, Haruki Eguchi M. Fumizawa (Shonan Inst. of Tech., Japan) and Masato Ishizaki (Ishikawajima-Harima SIT-P07 Locomotion of A Hyper-Redundant Mobile Robot (Gait int Heavy Industries Co., Ltd.) J. Nagatomo and H. Ohno (Shonan Inst. of Tech., Japan) SIT-P08 Acquirement of Dynamic Characteristics of A Pipeline Sys T. Kitahora (Shonan Inst. of Tech., Japan) SIT-P09 Exhaust Emissions and Performance of Diesel Engine Ope T. Morino and T. Morimune (Shonan Inst. of Tech., Japan) SIT-P10 Adsorption Characteristics of Adsorbent Coated with Cellu A. Yamashita and S. Sato (Shonan Inst. of Tech., Japan) SIT-P11 Solute Removal Characteristics of Portable Module with H A. Yamashita, S. Nagao and T. Okugawa (Shonan Inst. of T SIT-P12 Effect of Some Amine Compounds on Friction and Anti-We M. Muraki and S. Gotoh (Shonan Inst. of Tech., Japan) SIT-P13 Friction-Velocity Characteristics of ZnDTP Containing Oi M. Muraki and K. Nakatsu (Shonan Inst. of Tech., Japan) SIT-P14 Design of Guard Ring for Geiger Mode Avalanche Photod T K dS O (Sh I fT h J ) Plenary Lecture 3 : Room 605 BASIC RESEARCH THRUSTS IN MULTIFUNCTIONAL MATERIALS AND STRUCTURES Byung-Lip Lee (Program Manager for Mechanics of Materials & Devices, U. S. Air Force Office of Scientific Research) Moderator: Akira Todoroki (Tokyo Inst. Tech.) Lunch Wednesday Afternoon (30th November) 605 Measurement & Nondestructive Evaluation 4 Moderator: Tatsuro Kosaka (Osaka City Univ.) S8-16 (13:30-13:50) Piezoimpedance behavior of a CFRP unidirectional composite Keiji Ogi and Hiroki Inoue (Ehime Univ.) P-5 607 Polymer Matrix Composite (evaluation-1) Moderator: Qing-Qing NI (Shinshu Univ.) S4-08 (13:30-13:50) Experimental and Analytical Investigation of Thermal Conductivity in Carbon Fiber Reinforced Plastics Shinji Ogihara, Masato Okita, Takahito Chiba (Tokyo Univ. of Science), Junichi Shimizu (Nippon Steel Corporatio) Yoji Okabe and Nobuo Takeda (The Univ. of Tokyo) S4-10 (13:50-14:10) Damping Characteristics of Organic Hybrid Materials Filled with Inorganic Filler Naohisa Sato, Shuichi Akasaka, Yoichi Tominaga, Shigeo Asai and Masao Sumita (T k I t f T h S4-11 (14:10-14:30) ) The study of properties of S2/Ep composite materials at different temperature Jia Lixia, Chen Hui and Gao Julong (Harbin FRP Inst.) 606 New Materials and Fabrication Technology 4 Moderator: Ian. J. Davis Curtin Univ. of Tech.), Takashi Nishino Kobe Univ.) S3-16 (13:30-13:50) Preparation of All-Cellulose Composite by Partial Dissolving of Fibers Noriko Arimoto, Takashi Nishino (Kobe University) 608 Aerospace and Marine Structures 3 Moderator: Kazuaki Amaoka (FHI) Invited paper: S2-10 (13:30-14:10) Composite Tooling for Fibre Placement of Large Structures E.G. Shahidi and Q.P.V. Fontana (Advanced Composites Group, United Kingdom) 609 610 Automobile and Ground Transportation 4 Moderator: Akihiko Kitano (Toray Industries, Inc.) Invited paper: S1-14 (13:30-14:10) On performance behaviors of nanostructured Mg-alloys and superhard nanocomposite coated cutting tools for automotive applications Y.-W. Mai, C. Yan (The Univ. of Sydney), K.-Y. Li and Y.-G. Shen (City Univ. of Hong Kong) S8-17 (13:50-14:10) Self-sensing system for CFRP structures using electrical resistance change Akira Todoroki (Tokyo Inst. of Tech.) S3-18 (13:50-14:10) Oil Palmfruit Bunch Residues as a fiber source for Polymer Matrix Composites Anizah Kalam, Nor’Aini Wahab and Zahurin Halim (Universiti Teknologi MARA) S3-17 (14:10-14:30) Structure–Property Relationships in Bamboo I.M. Low, Z.Y. Che, Ian J. Davies and N.Tezuka (Curtin Univ. of Tech.) S8-18 (14:10-14:30) Delamination monitoring of CRFP laminate using asymmetrical dual charge electric potential change method Masahito Ueda and Akira Todoroki (Tokyo Inst. of Tech.) S8-19 (14:30-14:50) Temperature-compensated wireless sensor for Detection of Delamination Cracks in CFRP laminates using oscillating frequency changes Ryosuke Matsuzaki and Akira Todoroki (Tokyo Inst. of Tech.) S1-15 (14:10-14:30) Advanced glass-mat thermolplastic comopsite applications for advanced automotive industry Harri Dittmar, Henri-Paul Benichou (Quadrant Plastic Composites AG) S1-16 (14:30-14:50) Continuous fiber reinforced LFT for structural applications Frank Henning, Wenzel Krause (Fraunhofer-Institut Chemische Technologi) and Heinrich Ernst (Dieffenbacher GmbH+Co KG) S3-19 (14:30-14:50) Study on how to improve the Mechanical Properties of Bamboo Fiber Reinforced plastics based on Poly Lactic Acid Takuya Manabe, Naoya Yamashita, Kazuya Okubo, Toru FUJII (Doshisha Univ.) Break Special Evening Lectures 2 : Room 605 Origami and Aerospace - a new approach for sandwich structures Klaus Drechsler (Professor, University of Stuttgart Inst. of Aircraft Design) Moderator: Akihiko Kitano (Toray Industries, Inc.) Special Evening Lectures 3 : Room 605 Composites technology (Materials, Processes and Applications) within the energy market Scott Beckwith (SAMPE International Technical Director, President, BTG Composites LLC) Moderator: Jun Takahashi (The Univ. of Tokyo) Thursday Morning (1st December) 605 Measurement & Nondestructive Evaluation 5 606 New Materials and Fabrication Technology 5 607 Polymer Matrix Composite (fatigue & degradation) Moderator: Masaki Hojo (Kyoto Univ.) S4-12 (9:00-9:20) Experimental study on fatigue behavior of one direction FRP sheets Zhishen Wu, Kentaro Iwashita (Ibaraki Univ.), Takashi Ishikawa, Yasumasa Hamaguchi (JAXA) and Toshio Suzuki (Ibaraki Univ.) Moderator: Qing-Qing Ni (Shinshu University), Atsushi Iwasaki (Gunma Univ.) S8-20 (9:20-9:40) Electrical resistance change of CFRP laminates by moisture absorption Yoshinobu Shimamura (Shizuoka Univ.), Arata Mugishima and Akira Todoroki (Tokyo Inst. of Tech.) S8-21 (9:40-10:00) Damage identification of quasi-isotropic CFRP laminate with the electrical resistance change method ?Application of the statistical method to the solver of inverse problem? Yoshiyasu Hirano (JAXA), Ryo Watanabe, Akira Todoroki (Tokyo Inst. of Tech.) , Atushi Iwasaki (Gunma Univ.) and Takashi Ishikawa (JAXA) S8-22 (10:00-10:20) Monitoring Method for penetration of sulfuric solution in a functional FRP lining Yoshihiro Masuda, Masatoshi Kubouchi, Tetsuya Sakai and Ken Tsuda (Tokyo Inst. of Tech.) Moderator: M.Hussain Ismaili (Univ Tech. Mara.) Toshio Ogasawara (JAXA) S4-13 (9:20-9:40) Tension-tension fatigue behavior of the composite laminates reinforced by micro and nano scale particles Takuya Karaki (Toray Industries, Inc.), Samra S. Sangari (Univ. of Washington) and James C. Seferis (Glocal Univ.) P-6 608 Sponced Session = KIT = Advanced design method of aircraft composite strutcutres Organized by: Stephen W. Tsai (Stanford Univ.) and Yasushi Miyano (Kanazawa Inst. of Tech.) 609 Metals, Ceramics, Carbon and Their Composites 1 610 CAD/CAM/CAE and Computational Engineering 1 Moderator: Moderator: Thomas Weissgaerber (Fraunhofer-Inst. Hiroshi Suemasu (Sophia Univ.) for IMAF), Yasuo Kogo (Tokyo Univ. of Science) Invited paper: S6-01 (9:00-09:420) S5-01 (9:00-9:20) Progressive Failure Transient for Dynamic Application of Dimple Treatment to Analysis (PFDA) &Virtual Crack Closure CFRP/Metal Joint Technique (VCCT) Ryosuke Matsuzaki, Motoko Shibata and Frank Abdi Alpha STAR Corporation) Akira Todoroki (Tokyo Inst. of Tech.) S5-23 (9:20-9:40) Development of active fiber-reinforced metals Hiroshi Asanuma (Chiba Univ.) SIFT-EFM for damage in impact and quasi-static problems T.E. Tay (National Univ. of Singapore) S4-14 (9:40-10:00) Damage Progression and Mechanical Response of Glass and Carbon Fabric Composites under Static and Cyclic Loadings at Cryogenic Temperature Seiji Kubo, Kazuya Okubo and Toru Fujii (Doshisha Univ.) Numerical Results and Comparison with Data of SIFT-EFM Jon Gosse (The Boeing Company) S5-02 (9:40-10:00) Tensile failure simulation of alumina-fiberreinforced aluminum matrix composites Tomonaga OKABE (Tohoku Univ.) S6-02 (9:40-10:00) Sitting Simulation for Pressure Distribution of Human Body on Office Chair in Consideration of Textile Bearing Surface Kazuhiro Sakalobara, Junya Sueno and Atsushi Yokoyama (Kyoto Inst. of Tech.) S8-23 (10:20-10:40) Automatic damage detection of the Jet-Fan using Statistical Unsupervised Method A.Iwasaki (Gunma Univ.), A.Todoroki (Tokyo Inst. of Tech.), T.Sugiya (DMW Corporation) S4-15 (10:00-10:20) Evaluation of damage growth of impacted CFRP laminate under variable amplitude fatigue H. Saito, H. Takeuchi and I. Kimpara S3-21 (10:00-10:20) The effect of processing parameters on the (Kanazawa Inst. of Tech.) properties of carbon fibers fabricated from commercial dry spin acrylonitrile fiber precursors Arman Sedghi (Imam Khomeini International Univ.), Ali Shokuhfar and Reza Eslami Farsani (K. N. Toosi Univ. of T h )(10:20-10:40) S3-22 S4-16 (10:20-10:40) Manufacturing of Mechanical Components through Warm Compaction Process- A Finite Element Analysis and Experimental Investigation M. M. Rahman, S. Ramesh (Universiti Tenaga Nasional), A. K. Ariffin (Universiti Kebangsaan Malaysia), S. S. M. Nor and M. R. Jamli (Universiti Tenaga Nasional) Three-dimensional Micromechanics for Continuous Fiber Reinforced Composites Sung Kyu Ha (Hanyang University) Invited paper: S5-03 (10:00-10:40) Spark Plasma Sintering of Intermetallics and Metal Matrix Composites J. Schmidt, T. Weissgaerber, T. Schubert and B. Kieback (Fraunhofer-Inst. for Manufacturing and Advanced Materials Dresden) S6-03 (10:00-10:20) Modeling Bolts in Finite Element Software Negar Rasti (University of Windsor) Integration of Weight/Cost Reduction Influence of Frequency on Matrix Methods Transverse Cracking in CFRP Cross-Ply Sangwook Sihn (Univ. of Dayton Research Laminates Under Fatigue Loading Inst.) T.H. Nguyen, D. Gamby and M.C. LafarieFrenot (LMPM) Review Paper: S6-04 (10:20-10:40) Introduction to CATIA Composites Design Luc JAMMES , Wen-Jun H (Dassault Systè mes K.K Thursday Morning (1st December) 605 Measurement & Nondestructive Evaluation 5 S8-24 (10:40-11:00) Vibration Characteristics of Laminates with Shape Memory Alloys Qing-Qing NI (Shinshu Univ.), Run-xin Zhang, Takahiko Yamamura, Arata Masuda (Kyoto Inst. of Tech.) P-7 607 Polymer Matrix Composite (fatigue & degradation) 608 609 Metals, Ceramics, Carbon and Their Composites 1 S5-04 (10:40-11:00) An Optimum Diameter of Tyranno SATM monofilament as the Reinforcement of Abrator FRP Tetsuya Morimoto (JAXA) and Shinji Ogihara (Tokyo Univ. of Science) 606 New Materials and Fabrication Technology 5 610 CAD/CAM/CAE and Computational Engineering 1 Review Paper: S6-05 (10: 0-11:00) Overview of GENOA Frank Abdi (Alpha STAR Corporation) S3-23 (10:40-11:00) S4-17 (10:40-11:00) Development of High Density Green Parts Degradation Behavior of Multi-Axial Warp Using Warm Compaction Process Knitted Fabric Composites Immersed in Aidah Jumahat (Universiti Teknologi Mara), Hot Water Yasuhiro Nishikawa, Naoyuki Kawai, A.K. Ariffin (Universiti Kebangsaan Malaysia) and M. Hussain Ismail (Universiti Kenichi Sugimoto (Seikow Chemical Engineering & Machinery Ltd.), Asami Teknologi Mara) Nakai and Hiroyuki Hamada (Kyoto Inst. of Tech.) S3-24 (11:00-11:20) Effect of powder loading on metal infectionmolding (MIM) green properties M. Hussain Ismail (UiTM Shah Alam), N. Muhamad (UKM Bangi), A. Jumahat, N. R. Abdullah and J. Mahmud (UiTM Shah Alam) S4-18 (11:00-11:20) Fatigue Behavior of Multi-Axial Warp Knitted Fabric Composites Yasuhiro Nishikawa (Kyoto Inst. of Tech.), Kenichi Sugimoto (Seikow Chemical Engineering & Machinery Ltd.), Asami Nakai and Hiroyuki Hamada (Kyoto Inst. of Tech.) S8-25 (11:00-11:20) A self-Diagnostic Technique Monitoring the Bearing Damage of Bloted Joints Yi Xiao, Yoshiaki Kakuta and Takashi Ishikawa (JAXA) S5-05 (11:00-11:20) The Potential Strength on an Imaginary SiC Fiber of Optimized Diameter and Controlled Crack Sources Tetsuya Morimoto (JAXA) , Koji Yamamoto and Shinji Ogihara (Tokyo Univ. of Science) S6-23 (11:00-11:20) Numerical study of the life prediction for wing box structures Tomonaga Okabe and H. Sekine (Tohoku Univ.) Break Plenary Lecture 4 : Room 605 Material Innovation by Nanotechnology Hiroaki Kobayashi (Executive Vice President and Representative Director, Toray Industries, Inc.) and Koichi Abe (Director, General manager, Reserach and Development Division, Toray Industries, Inc.) Moderator: Toshio Tanimoto (Shonan Inst. of Tech.) Lunch Thursday Afternoon (1st December) 605 Measurement & Nondestructive Evaluation 6 606 New Materials and Fabrication Technology 6 607 Polymer Matrix Composite (strength/fracture) Moderator: Hiroshi Fukuda (Tokyo University of Science) S4-19 (13:30-13:50) A Study of Impacted Damage of CFRP Scarf Joints Keisuke Nakano, Hiroshi Fukuda (Tokyo Univ. of Science), Hikaru Hoshi (Nagasaki Inst. of Applied Science), Yutaka Iwahori and Takashi Ishikawa (JAXA) P-8 608 Development and Applications 1 Moderator: Masaki Hojo (Kyoto Univ.) 609 Metals, Ceramics, Carbon and Their Composites 2 Moderator: Tetsuya Morimoto (JAXA) 610 CAD/CAM/CAE and Computational Engineering 2 Moderator: Tomonaga Okabe (Tohoku Univ.) S6-06 (13:30-14:10) Invited paper: Eshelby's tensor fields for arbitratry domain: irreducible structure, symmetry and average Q.-S. Zheng, Z.-H. Zhao (Tsinghua Univ.) and D.-X. Du (Princeton Univ.) Moderator: Moderator: Yoshihiro Sawada (Osaka City Univ.) Yoshimichi Fujii (Seikow Chemical Akira Todoroki (Tokyo Inst. Tech.) Engineering and Machinery, ltd.), Yoshinobu Shimamura (Shizuoka Univ.) S3-25 (13:30-13:50) Effects of Test Speeds on the Tensile S8-26 (13:30-13:50) Strength of Aluminum-GFRP Adhesively Ultra sonic non-destructive inspection of Bonded Joints GFRP immersed in hot water Katsuhiko Osaka, Tomohiro Ito, Tatsuro Y. Fujii, K. Sugimoto (Seikow Chemical Engineering & Machinery, Ltd.), A. Nakai Kosaka and Yoshihiro Sawada (Osaka City Univ.) and H. Hamada (Kyoto Inst. of Tech.) S5-07 (13:30-13:50) S7-02 (13:30-13:50) Accelerated Testing for Long-term Fatigue A self-sealing coating system for C/C composites Strength of CFRP laminates under Temperature and Water Environments Hiroshi Yamauchi (IHI Aerospace Co,. Yasushi Miyano, Masayuki Nakada and Eiji Ltd.), Takuya Aoki (JAXA) and Shigeru Hayakawa (Kanazawa Inst. of Tech.) Suzuki (IHI Aerospace Co,. Ltd.) S8-27 (13:50-14:10) Raman Piezo-spectroscopic analysis of Ultra High Molecular Weight Polyethylene Kiyotaka Yamada (Kyoto Inst. of Tech.), Toshiyuki Tateiwa, Tsuyoshi Kumakura (Tokyo Medical Univ.) and KengoYamamoto and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S8-28 (14:10-14:30) Confocal Raman spectroscopic analysis of phase-transformation and residual stress in zirconia ceramics Kazutake Kitamura (Kyoto Inst. of Tech.), Junji Ikeda (Japan Medical Materials Co.), Wenliang Zhu and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S8-29 (14:30-14:50) Spatially resolved Raman microprobe spectroscopic characterization of residual stresses in ceramic coatings materials Shigemi Tochino and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S3-26 (13:50-14:10) Piezoresistivity of carbon-nanotube composite Tetsuo Yasuoka (Tokyo Inst. of Tech.) and Yoshinobu Shimamura (Shizuoka Univ.) S4-20 (13:50-14:10) Environment Effects on Interlaminar Fracture Toughness of Multiaxial Knitted CFRP Laminate H. Saito, T. Nozaki and I. Kimpara (Kanazawa Inst. of Tech.) S7-03 (13:50-14:10) Fatigue life predection methodology Ran Y. Kim (Univ. of Dayton Research Inst.) S5-08 (13:50-14:10) Modelling the Influence of Oxidation on the Strength of Ceramic Fibres Jonathan Connell and Ian J. Davies (Curtin Univ. of Tech.) S3-27 (14:10-14:30) Improvement of Ionic Conductivity and Mechanical Properties of Composite Polymer Electrolytes Containing HighOrdered Mesoporous Silica Masahiro Morita, Yoichi Tominaga, Shigeo Aasai and Masao Sumita (Tokyo Inst. of Tech.) S3-28 (14:30-14:50) The low frequency sound absorption characteristics of organic hybrid materials Shuichi Akasaka, Yoichi Tominaga, Shigeo Asai and Masao Sumita (Tokyo Inst. of Tech.) S4-21 (14:10-14:30) Evaluation of Mode III Interlaminar Fracture Toughness in CFRP Laminates Shinji Ogihara and Katsuhiro Matsuda (Tokyo Univ. of Science) S7-04 (14:10-14:30) Integlated experimental characterization of post-impact fatigue beahavior of CFRP laminates I. Kimpara, H. Saito (Kanazawa Inst. of Tech.) S5-09 (14:10-14:30) Mechanical Properties of Silicon Carbide Composites with Si-Al-C Fiber and Vapor Grown Carbon Nanofiber Addition Kiyoshi Itatani, Masanori Sato (Sophia Univ.), Ian J. Davies (Curtin Univ. of Tech.), Hiroshi Suemasu and Seiichiro Koda (Sophia Univ.) S6-07 (14:10-14:30) Application of the extended finite element method to fracture problems Toshio Nagashimai (Sophia Uni.) S4-22 (14:30-14:50) Comparison of Test Methods for Shearing Strength of Pultruded GFRPs Akihisa Noda (Tokyo Univ. of Science), Koshiro Hayashi, Go Itohiya (Asahi Glass Matex Co., Ltd,), Masaaki Itabashi and Hiroshi Fukuda (Tokyo Univ. of Science) S7-05 (14:30-14:50) Damage and Structural Health Monitoring of Composite Structure Using Optical Fiber Sensors Nobuo Takeda, Yoji Okabe and Tadahito Mizutani (The Univ. of Tokyo) S6-08 (14:30-14:50) Cell adapting triangle meshes and the creation method Shugo Usami (RIKEN), Yuichiro Terada, Hiroshi Yagi (Armonicos Co.), Yoshinori Teshima, Kiwamu Kase (RIKEN) S8-30 (14:50-15:10) Nano-sccale stress measurement and property characterization of silica-based electro optifcal devices using their nativce defects luminescence Andrea Leto and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S3-29 (14:50-15:10) S4-23 (14:50-15:10) Fracture Behavior of Long Fiber Effect of Loading Rate on Nonlinear Reinforced Thermoplastic Composites Mechanical Response of CFRP Laminates Yoshihiro Takai, Naoyuki Kawai, Asami Shinji Ogihara, Tetsuya Mouri, Takashi Nakai and Hiroyuki Hamada (Kyoto Inst. of Nakajima (Tokyo Univ. of Science) and Tech.) Asao Koike (Isuzu Advanced Engineering Center, Ltd.) S6-09 (14:50-15:10) Finite element simulations of delamination propagation in composite laminates using decohesion elements Yutaka Zemba, Ning Hu and Hisao Fukunaga (Tohoku Univ.) Break Thursday Afternoon (1st December) 605 606 607 608 609 610 P-9 Market Trend: Panel Discussion :Room 605 Moderator: Junichi Matsui (Venture Lab. Formerly belonged to Toray Industries, Inc.) Topics: Innovative Market Development for Future Advanced Composites Panelist: *Tom Haulik: Business Manager, Cytec Carbon Fibers LLC. SAMPE, Past President *Dr. Uwe Bueltjer, Managing Director, AVK-TV (German Society for Reinforced Plastics) * Chun Yue BAI : Advisor, Harbin FRP Research Institute, China *Toshihiro Aoyama : TOHO TENAX CO., LTD. Managing Director & Executive General Manager, Carbon Fiber & Specialties Sales Div. BANQET Friday Morning (2ed December) 605 Measurement & Nondestructive Evaluation 7 606 607 Polymer Matrix Composite (evaluation-2) Moderator: Toru Morii (Shonan Inst. of Tech.) S4-24 (9:00-9:20) Research on impact properties of Aramid FRP Yuming Sun, Jun Watanabe, Eitoku Nakanishi, Yutaka Sawaki and Kiyoshi Isogimi (Mie Univ.) P-10 608 Development and Applications 2 Moderator: Hiroshige Kikukawa (KIT) S7-06 (9:00-9:20) Fatigue Strength of Fiber Reinforced Plastic Degraded by Environmental Exposure Norio Takeda (Hitachi, Ltd.) 609 Metals, Ceramics, Carbon and Their Composites 3 Moderator: Ian J. Davies (Curtin Univ. of Tech.) S5-10 (9:00-9:20) High spatial resolution stress assessments on SiC and BaTiO3 thin films by cathodoluminescence piezo-spectroscopy Kensuke Akazawa (Kyoto Inst. of Tech.), Yasuhisa Yamashita, Hiroshi Yamamoto, Akira Ando (Murata Mfg. Co., Ltd,) and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S5-11 (9:20-9:40) Spatially resolved cathodoluminescence piezo-spectroscopy of BaTiO3 thin films Masayuki Higashino (Kyoto Inst. of Tech.), Yasuhisa Yamashita, Hiroshi Yamamoto, Akira Ando (Murata Mfg. Co., Ltd,) and Giuseppe (Kyoto Inst. of Tech.) 610 CAD/CAM/CAE and Computational Engineering 3 Moderator: Atsushi Yokoyama(Kyoto Inst. of Tech.) Review Paper: S6-10 (9:00-9:20) Laminate Tools Introduction George Kretsis (Anaglyph Ltd.) and Shunichirou Hisada (Mikuni Corporation) Moderator: Yoji Okabe (The Univ. of Tokyo) S8-31 (9:20-9:40) Spatially resolved residual stress measurements in MOS devices using a CL piezo-spectroscopic method Koichiro Hosokawa, Andrea Leto and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S8-32 (9:40-10:00) Cathodoluminescence Stress Analysis of stressed/unstressed silica-based semiconductor devices Akiko Takenaka, Koichiro Hosokawa, Andrea Leto and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S4-26 (9:20-9:40) Long-term life prediction for compressive strength of CFRP laminates by strain invariant failure theory Junji Noda, Toshihide Marutani (Kanazawa Inst. of Tech.), Hongneng Cai (Xi’an Jiaotong Univ.), Masayuki Nakada and Yasushi Miyano (Kanazawa Inst. of Tech.) S7-07 (9:20-9:40) Health-monitoring technologies using transmitted light and an optical-fiber sensor for Fiber-reinforced plastics and bolts Hiroshi Aoyama, Kohhei Tanaka and Masayuki Nakamura (Hitachi, Ltd.) S6-11 (9:20-9:40) Simulations of Aramid fiber Deformation and Fracture Phenomena During Machining A-FRP E. Nakanishi, M. Fukumori, Y Sawaki and K. Isogimi (Mie Univ.) S4-27 (9:40-10:00) S7-08 (9:40-10:00) Experimental Evaluation of Matrix Suppression of interfacial crack for foam Cracking in CFRP Angle-Ply Laminates core sandwich panel with new arrester Shinji Ogihara and Takashi Yoshida (Tokyo Hirose Yasuo (Kawasaki Heavy Industries, Univ. of Science) Ltd), Hojo Masaki and Fujiyoshi Akira (Kyoto Univ.) S5-12 (9:40-10:00) Residual stress analysis in BaTiO3 based Ni-MLCC by polarized fluorescence piezospectroscopy Takeshi Sawada (Kyoto Inst. of Tech.), Tatsuo Sakashita (Taiyo Yuden Co., Ltd.), Giuseppe Pezzotti (Kyoto Inst. of Tech.) and Hirokazu Chazono (Taiyo Yuden Co., Ltd.) S5-13 (10:00-10:20) Deconvolution procedure for assessing domain switching and applied stress from the Raman spectroscopic shift of BaTiO3 polycrystal Shinsuke Yamamoto (Kyoto Inst. of Tech.), Tatsuo Sakashita (Taiyo Yuden Co., Ltd.), Giuseppe Pezzotti (Kyoto Inst. of Tech.) and Hirokazu Chazono (Taiyo Yuden Co., Ltd.) S5-14 (10:20-10:40) Cathodoluminescence piezo-spectroscopic stress assessments on GaN substrates Atsuo Matsutani, Andrea Leto and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S6-12 (9:40-10:00) A numerical study on a failure mechanism from the thick filament wound hoop layer of a solid rocket motor case Hiroshi Suemasu and Ken Sakajiri (Sophia Univ.) S8-33 (10:00-10:20) Relationship between residual stress and crystallographic defects in epitaxially grown GaN films Naohide Furukawa, Atsuo Matsutani, Shigemi Tochino, and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S4-28 (10:00-10:20) Mechanical properties of composite with L-Joint Hiroyuki HAMADA, Hisashi MIZUNO, Kenichi SUGIMOTO and Asami NAKAI (Kyoto Inst. of Tech.) S7-09 (10:00-10:20) Development of High Performance FRP Bolt Iwao Shimoyamada, Keiichi Kawase, Takashi Satou, and Masamitu Iinuma (Sanko Techno Co., Ltd.) Review Paper S6-13 (10:00-10:20) Estimating – methods and practice Andrew Langridge (Galorath Affiliates Limited) S8-34 (10:20-10:40) In-depth residual stress evaluation of ZnO thin film on Si substrate using spatial/spectral resolved cathodoluminescence spectroscopy Keshu Wan, Wenliang Zhu, Giuseppe Pezzotti (Kyoto Inst. of Tech.), Canyun Zhang and Xiaomin Li (Shanghai Inst. of Ceramic) Break Friday Morning (2ed December) Measurement & Nondestructive Evaluation 8 Moderator: Goffredo De Portu (ISTEC-CNR) Special Tutorial Seminar (10:30-12:30) Resin Infusion Processing: Methods, Limitations. Current Technology, S8-35 (10:50-11:10) Applications and Examples Experimental confirmation of the piezospectroscopic tensorial law for multiaxial Scott Beckwith, BTG Composites, U.S.A. SAMPE International Technical Director, stress states in polycrystalline ceramics SAMPE Fellow Shuji Shiroyama (Kyoto Inst. of Tech.), Shigehiro Ohtsuka, Yutaka Sekiguchi (NGK Spark Plug Co., Ltd.) and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S8-36 (11:10-11:30) Application of piezo-spectroscopic method to stress evaluation in alumina particulate glass-matrix composites Kanta Sakamoto, Shuji Shiroyama (Kyoto Inst. of Tech.), Yutaka Sekiguchi, Shigehiro Ohtsuka (NGK Spark Plug Co., Ltd.), Marco Deluca and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S8-37 (11:30-11:50) Stress dependence of the oxygen-defect CL band of sapphire single-crystal Maria Chiara Munisso and Giuseppe Pezzotti (Kyoto Inst. of Tech.) P-11 Polymer Matrix Composite (interface) Moderator: Masao Sumita (Tokyo Inst. of Tech.) Development and Applications 3 Moderator: Yasuo Hirose (KHI) Metals, Ceramics, Carbon and Their Composites 4 CAD/CAM/CAE and Computational Engineering 4 Moderator: Moderator: Shuichi Wakayama (Tokyo Metropolitan Ning HU (Tohoku Univ.) Univ.) Review Paper: S4-29 (10:50-11:10) S7-11 (10:50-11:10) S6-14 (10:50-11:10) A Study on Correlation between Physical CAI Strength of Adhesive Joiunt Imitating S5-15 (10:50-11:10) Hypersizer New Analyses IN Next Release Properties and Interfacial Characteristic Probe response function and nano-scale a CFRP Repair parts Craig Collier, P.E (Collier Research in Highly-Loaded Graphite-Polymer resolution stress assessments in GaN by Hikaru Hoshi (Nagasaki Inst. of Applied Corporation ) Composites Science), Keisuke Nakano (Tokyo Univ. of electron-stimulated luminescence piezoToshihiro Arai (Showa Denko K. K.), Science), Yutaka Iwahori, Takashi Ishikawa spectroscopy Yoichi Tominaga, Shigeo Asai and Masao (JAXA), Hiroshi Yajima (Nagasaki Inst. of Yoshitomo Tanaka, Atsuo Matsutani, Andrea Leto, Shigemi Tochino and Sumita (Tokyo Inst. of Tech.) Applied Science) Giuseppe Pezzotti (Kyoto Inst. of Tech.) S4-30 (11:10-11:30) Experimental Evaluation of Interfacial Strength and Unidirectional Composite Strength Shinji Ogihara, Michiharu Suzuki (Tokyo Univ. of Science) and Tetsuya Morimoto (JAXA) S7-12 (11:10-11:30) Comparisons between theories and FE results about local buckling of CFRP sandwich panels Yasutoshi Tateishi (Shimizu Corpration) and Seishi YAMADA (Toyohashi Univ. of Tech.) S5-16 (11:10-11:30) Deconvolution analysis of residual stress and temperature fields in microscopic silicon devices by Raman microprobe spectroscopy Shigemi Tochino (Kyoto Inst. of Tech.), Shinichi Igarashi, Akiko N. Itakura (NIMS) and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S5-17 (11:30-11:50) Photo-stimulated Raman and fluorescence spectra of ceramic perovskite structures : A comparison between blue-and red-line excitation Takahiro Azuma (Kyoto Inst. of Tech.), Tatsuo Sakashita (Taiyo Yuden Co.,Ltd.), Takeshi Sawada, Giuseppe Pezzotti (Kyoto Inst. of Tech.) and Hirokazu Chazono (Taiyo Yuden Co.,Ltd.) S5-18 (11:50-12:10) Cathodoluminescence spectrum of Ho3+ dopant as a sensor for nanometer-scale residual stress analysis in BaTiO3 ceramics Tatsuo Sakashita (Taiyo Yuden Co.,Ltd.), Giuseppe Pezzotti (Kyoto Inst. of Tech.) and Hirokazu Chazono (Taiyo Yuden Co.,Ltd.) S6-15 (11:10-11:30) Numerical Model of Thighbone with Micro Structure for Stress Analysis Keigo Wakasa, Atsushi Yokoyama (Kyoto Inst. of Tech.) and Tsuneo Hirai S4-31 (11:30-11:50) Evaluation of Interfacial Strength using Cruciform Specimens Shinji Ogihara and Takashi Umesaki (Tokyo Univ. of Science) S7-13 (11:30-11:50) Bending Deformation of Alpine Ski during Turning Y. Hirano (Chuo Univ.) S6-16(11:30-11:50) Detectablity Analysis of Damage in Laminated Composite Plates by Detouring Electrical Current Yoshinobu Shimamura (Shizuoka Univ.), Keiko Oda and Akira Todoroki (Tokyo Inst. of Tech.) S8-38 (11:50-11:10) Domain Orientation Mapping in PZTBased Ceramics by Polarized Raman Spectroscopy Marco Deluca (ISTEC-CNR), Tatsuo Sakashita (Taiyo Yuden Co. Ltd.), Carmen Galassi (ISTEC-CNR), Giuseppe Pezzotti (Kyoto Inst. of Tech.) S8-39 (12:10-12:30) Determination of in-depth probe response function for fluorescence bands using a stress perturbation method Keshu Wan, Wenliang Zhu and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S7-14 (11:50-12:10) Development of the light-weight Composite Pallet for an Assembly line of LCDs and PDPs S.H. Eum (The Univ. of Tokyo), J. W. Han, K. J. Kim, B.K. Choi, Y. H. Kim (Korea Maritime Univ.) and K. Kageyama (The Univ. of Tokyo) S6-17 (11:50-12:10) Numerical simulation of ZanchorTM CFRP laminates Yuichiro Aoki, Yosuke Nagao, Yutaka Iwahori and Takashi Ishikawa (JAXA) S6-18 (12:10-12:30) Optimum Design Method for Multi Design Parameter of Injection Molding Die by Discrete Optimum Technique Yusuke Sekiya, Atsushi Yokoyama (Kyoto Institute of Tech.) Lunch Friday Afternoon (2ed December) 605 Measurement & Nondestructive Evaluation 9 Moderator: Marco Deluca (ISTEC-CNR) S8-40 (13:30-13:50) Non-destructive quantitative stress evaluation in ceramic materials and structures using confocal piezospectroscopy Wenliang Zhu, Keshu Wan and Giuseppe Pezzotti (Kyoto Inst. of Tech.) P-12 607 608 Development and Applications 4 609 Metals, Ceramics, Carbon and Their Composites 5 Moderator: Andrea Leto (Kyoto Inst. of Tech.) S5-19 (13:30-13:50) Diffraction Studies of Phase Transformations in Kaolin at Elevated Temperature N.Tezuka, I.M. Low and Ian J. Davies (Curtin Univ. of Tech.) 606 610 CAD/CAM/CAE and Computational Engineering 5 Moderator: Yoshinobu Shimamura (Shizuoka Univ.) S6-19 (13:30-13:50) The Vibration Control of Flexible Structures by the Optimal Placement of Sensors and Actuators Nariyuki Kawabata (Anan National College of Tech.), Hu Ning and Hisao Fukunaga (Tohoku Univ.) Special Tutorial Seminar (13:30-15:30) RTM and NCF Vacuum infusion: Novel Preforming and Molding Technology for Affordable Composites Andrew Mills, Professor, Center for Lightweight Composites Cranfield University, UK Moderator: Hiroshige Kikukawa (KIT) S7-15 (13:30-13:50) FRP-Concrete Composite Beams Using Wet-Bonding Technology Yixin Shao (McGill Univ.), Zhishen Wu and Haitang Zhu (Ibaraki Univ.) S8-41 (13:50-14:10) Residual stress fields in mullite based laminated structures L. Micele, M. Brach, F. Chalvet, G. De Portu (ISTEC-CNR) and G. Pezzotti (Kyoto Inst. of Tech.) S5-20 (13:50-14:10) S7-16 (13:50-14:10) Characterization of mechanical properties Applicationh of Pultruded Composites in of Cortical and Trabecular Bone Worldwide Infrastructures Yixin Shao (McGill Univ.) and Zhishen Wu Keisuke Mogi and Shuichi Wakayama (Tokyo Metropolitan Univ.) (Ibaraki Univ.) S6-20 (13:50-14:10) Minimum Weight Design of Stiffened Composite Panels Using FBB and Kriging Method Masato Sekishiro and Akira Todoroki (Tokyo Inst. of Tech.) S8-42 (14:10-14:30) Determining the near band gap piezospectroscopic coefficient of GaN epitaxial film on (0001) sapphire using a controlled biaxial stress field Keshu Wan and Giuseppe Pezzotti (Kyoto Inst. of Tech.), Gan Feng and Hui Yang (Inst. of Semiconductors) S7-17 (14:10-14:30) Evaluation of surface wear mechanisms in retrieved alumina femoral heads by confocal fluorescence spectroscopy Takako Morikawa, Toshiyuki Tateiwa, Tsuyoshi Kumakura (Kyoto Inst. of Tech.), Ian C. Clarke (Loma Linda Univ.), Kengo Yamamoto (Tokyo Medical Univ.) and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S5-21 (14:10-14:30) Fracture behaviour of brittle materials containing inclined flaws Mabel See Chui Ling and Ian J. Davies (Curtin Univ. of Tech.) S6-21 (14:10-14:30) Shape Optimization of a Structural Element for its Crushing Characteristics Rentaro Kato, Masaru Murayama (Tokai Rubber Industries), Keisuke Kamiya and Toshiro Matsumoto (Nagoya Univ.) S5-22 (14:30-14:50) Influence of grain size on phase transformation and fracture toughness of 3Y-TZP Takayoshi Shimozono (Kyoto Inst. of Tech.), Junji Ikeda (Japan Medical Materials Co.) and Giuseppe Pezzotti (Kyoto Inst. of Tech.) S6-22 (14:30-14:50) Optimum Design of Composite Plate Wings under Aeroelastic Constraints Masaki Kameyama (Tohoku Univ.)