Docstoc

99915 024 ENG Hardware catalogue

Document Sample
99915 024 ENG Hardware catalogue Powered By Docstoc
					alfer                                                        1
                           ®



combitech system
           ®




Basis




     Hardware catalogue

               English · start of validity is October 2008
alfer
                          ®




                Material
       Plastic, acrylonitrile butadiene styrene
       alferceram , ceramic powder-coated
                      ®




       aluminium
       Aluminium, vibratory finishing
       alferoxal , multicolor aluminium,
                  ®




       anodized
       Powder-coated aluminium
       Uncoated aluminium
       Anodized aluminium
       Copper, solid
       Plastic, ethylene vinyl acetate
       Hard ferrite
       Rubber
       Brass, solid or brass, shiny solid


       Plastic, polyamide
       Polycarbonate
       Plastic, polystyrene
       Plastic, polyvinylchloride
       Steel or steel, galvanized




              Packaging
loose: The item is not packed.
shrink-wrapped: The loose item is shrink-
wrapped in transparent PE foil.
shrink-wrapped SS: The shrink-wrapped item
comes with a SS Euro-perforation allowing it to
be suspended.
SS bag: The item is packed in a transparent
LDPE bag (Euro-perforation).
SS polybag: The article comes in a PE tube.
SS cardboard box: The item comes in a SS
cardboard box.
on roll: The item comes on a roll and can be
cut to measure.
sealed: The item is sealed with a transparent
PE foil.
foil-wrapped, one-sided: The item is covered
on one side with a protective foil.
rolled in a box: The item is packed rolled up in
a box.
clap-pac: The item comes in impact-resistant,
transparent, PVC snapshut packaging (multi-
perforation) and can be re-closed.
Min. OU: The minimum order unit specifies
both the minimum order quantity of an item and
the order unit.
E. g.: Min. OU = 5 pcs.: means that orders must
either be for a minimum of 5 pieces of this item,
or multiples thereof.
combitech system · Basis
          ®
  alfer
                              ®




combitech system · Basis
                                       ®




Item number summary

 Item No. Page          Item No. Page          Item No. Page          Item No. Page          Item No. Page          Item No. Page           Item No. Page          Item No. Page
  21042    1.27          21384    1.29          21610    1.30          25002    1.12          25402    1.14          25726    1.17           26062    1.20          29830    1.37
  21044    1.27          21386    1.29          21612    1.30          25004    1.12          25404    1.14          25728    1.17           26064    1.20          29832    1.37
  21046    1.27          21388    1.29          21614    1.30          25006    1.12          25406    1.14          25742    1.17           26066    1.20          29834    1.37
  21048    1.27          21390    1.29          21622    1.30          25008    1.12          25408    1.14          25744    1.17           26068    1.20          29848    1.36
  21050    1.27          21392    1.29          21624    1.30          25010    1.12          25410    1.14          25746    1.17           26090    1.19          29862    1.39
  21052    1.27          21394    1.29          21626    1.30          25012    1.12          25411    1.14          25748    1.17           26110    1.19          29864    1.39
  21054    1.27          21402    1.14          21628    1.30          25014    1.12          25412    1.14          25802    1.16           26124    1.21          29866    1.39
  21062    1.27          21404    1.14          21630    1.30          25022    1.12          25414    1.14          25804    1.16           26128    1.21          29868    1.39
  21064    1.27          21406    1.14          21632    1.30          25024    1.12          25422    1.14          25806    1.16           26144    1.21          29870    1.39
  21066    1.27          21410    1.14          21634    1.30          25026    1.12          25424    1.14          25808    1.16           26148    1.21          29872    1.39
  21068    1.27          21422    1.14          21646    1.16          25028    1.12          25426    1.14          25810    1.16           26204    1.22          29874    1.39
  21070    1.27          21424    1.14          21648    1.16          25030    1.12          25428    1.14          25812    1.16           26208    1.22          29882    1.39
  21072    1.27          21426    1.14          21650    1.16          25032    1.12          25430    1.14          25814    1.16           26224    1.22          29884    1.39
  21074    1.27          21430    1.14          21666    1.16          25034    1.12          25431    1.14          25822    1.16           26228    1.22          29886    1.39
  21122    1.27          21442    1.29          21668    1.16          25082    1.12          25432    1.14          25824    1.16           26284    1.23          29888    1.39
  21124    1.27          21444    1.29          21670    1.16          25084    1.12          25434    1.14          25826    1.16           26288    1.23          29890    1.39
  21126    1.27          21446    1.29          21682    1.31          25086    1.12          25482    1.15          25828    1.16           26304    1.22          29892    1.39
  21128    1.27          21448    1.29          21684    1.31          25088    1.12          25484    1.15          25830    1.16           26308    1.22          29894    1.39
  21142    1.27          21450    1.29          21686    1.31          25102    1.12          25486    1.15          25832    1.16           26364    1.23          29902    1.40




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
  21144    1.27          21452    1.29          21688    1.31          25104    1.12          25488    1.15          25834    1.16           26368    1.23          29904    1.40
  21146    1.27          21454    1.29          21690    1.31          25106    1.12          25490    1.15          25882    1.18           26384    1.23          29906    1.40
  21148    1.27          21462    1.29          21692    1.31          25108    1.12          25492    1.15          25884    1.18           26388    1.23          29908    1.40
  21164    1.13          21464    1.29          21694    1.31          25162    1.13          25494    1.15          25886    1.18           26444    1.24          29910    1.40
  21166    1.13          21466    1.29          21702    1.31          25164    1.13          25502    1.15          25888    1.18           26464    1.24          29912    1.40
  21168    1.13          21468    1.29          21704    1.31          25166    1.13          25504    1.15          25890    1.18           26524    1.25          29914    1.40
  21170    1.13          21470    1.29          21706    1.31          25168    1.13          25506    1.15          25891    1.18           26544    1.24          29922    1.40
  21184    1.13          21472    1.29          21708    1.31          25170    1.13          25508    1.15          25892    1.18           26604    1.25          29924    1.40
  21186    1.13          21474    1.29          21710    1.31          25171    1.13          25510    1.15          25894    1.18           26608    1.25          29926    1.40
  21188    1.13          21484    1.15          21712    1.31          25172    1.13          25512    1.15          25902    1.18           26624    1.25          29928    1.40
  21190    1.13          21486    1.15          21714    1.31          25174    1.13          25514    1.15          25904    1.18           26628    1.25          29930    1.40
  21202    1.28          21488    1.15          21762    1.31          25182    1.13          25562    1.15          25906    1.18           26684    1.26          29932    1.40
  21204    1.28          21504    1.15          21764    1.31          25184    1.13          25564    1.15          25908    1.18           26688    1.26          29934    1.40
  21206    1.28          21506    1.15          21766    1.31          25186    1.13          25566    1.15          25910    1.18           26704    1.26          30000    1.33
  21208    1.28          21508    1.15          21768    1.31          25188    1.13          25568    1.15          25911    1.18           26708    1.26          30001    1.33
  21210    1.28          21522    1.30          21782    1.31          25190    1.13          25570    1.15          25912    1.18           28661    1.36          30002    1.33
  21212    1.28          21524    1.30          21784    1.31          25191    1.13          25572    1.15          25914    1.18           28668    1.21          30003    1.33
  21214    1.28          21526    1.30          21786    1.31          25192    1.13          25574    1.15          25922    1.19           28669    1.19          30004    1.33
  21222    1.28          21528    1.30          21788    1.31          25194    1.13          25582    1.15          25930    1.19           28670    1.17          30005    1.33
  21224    1.28          21530    1.30          21806    1.16          25242    1.13          25584    1.15          25950    1.19           28671    1.17          30006    1.33
  21226    1.28          21532    1.30          21808    1.16          25244    1.13          25586    1.15          25962    1.18           28672    1.19          30007    1.33
  21228    1.28          21534    1.30          21810    1.16          25246    1.13          25588    1.15          25964    1.18           28683    1.40          30008    1.33
  21230    1.28          21542    1.30          21826    1.16          25248    1.13          25590    1.15          25966    1.18           28684    1.40          30009    1.33
  21232    1.28          21544    1.30          21828    1.16          25262    1.13          25592    1.15          25968    1.18           28685    1.40          30014    1.33
  21234    1.28          21546    1.30          21830    1.16          25264    1.13          25594    1.15          25970    1.18           28700    1.17          30015    1.33
  21282    1.28          21548    1.30          21842    1.32          25266    1.13          25642    1.16          25972    1.18           28701    1.19          30016    1.33
  21284    1.28          21550    1.30          21844    1.32          25268    1.13          25644    1.16          25974    1.18           28720    1.17          30018    1.33
  21286    1.28          21552    1.30          21846    1.32          25322    1.14          25646    1.16          25982    1.18           28721    1.19          30019    1.33
  21288    1.28          21554    1.30          21848    1.32          25324    1.14          25648    1.16          25984    1.18           29796    1.35          30020    1.33
  21302    1.28          21566    1.15          21850    1.32          25326    1.14          25650    1.16          25986    1.18           29797    1.35          30021    1.33
  21304    1.28          21568    1.15          21852    1.32          25328    1.14          25652    1.16          25988    1.18           29798    1.35          30022    1.33
  21306    1.28          21570    1.15          21854    1.32          25330    1.14          25654    1.16          25990    1.18           29799    1.35          30023    1.33
  21308    1.28          21572    1.15          21862    1.32          25332    1.14          25662    1.16          25992    1.18           29804    1.36          30024    1.33
  21362    1.29          21586    1.15          21864    1.32          25334    1.14          25664    1.16          25994    1.18           29806    1.36          30025    1.33
  21364    1.29          21588    1.15          21866    1.32          25342    1.14          25666    1.16          26002    1.20           29808    1.36          30026    1.33
  21366    1.29          21590    1.15          21868    1.32          25344    1.14          25668    1.16          26010    1.20           29810    1.36          30028    1.33
  21368    1.29          21592    1.15          21870    1.32          25346    1.14          25670    1.16          26030    1.20           29812    1.36          30029    1.33
  21370    1.29          21602    1.30          21872    1.32          25348    1.14          25672    1.16          26042    1.20           29814    1.36          30030    1.34
  21372    1.29          21604    1.30          21874    1.32          25350    1.14          25674    1.16          26044    1.20           29824    1.37          30031    1.34
  21374    1.29          21606    1.30          21890    1.18          25352    1.14          25722    1.17          26046    1.20           29826    1.37          30032    1.34
  21382    1.29          21608    1.30          21910    1.18          25354    1.14          25724    1.17          26048    1.20           29828    1.37          30033    1.34



     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.2
                                                            combitech system · Basis
                                                                                                   ®




                                                            Item number summary

                                                             Item No. Page          Item No. Page          Item No. Page          Item No. Page          Item No. Page          Item No. Page           Item No. Page          Item No. Page
                                                              30034    1.34          30076    1.41          30124    1.39          30192    1.48          30256    1.51          30292    1.53           30383    1.37          30795    1.50
                                                              30035    1.34          30078    1.41          30125    1.39          30194    1.48          30260    1.52          30293    1.53           30384    1.38          30796    1.50
                                                              30036    1.34          30079    1.41          30126    1.39          30204    1.46          30261    1.52          30294    1.53           30385    1.37          34801    1.34
                                                              30042    1.34          30080    1.42          30128    1.39          30224    1.46          30262    1.52          30295    1.53           30386    1.37          39490    1.38
                                                              30043    1.34          30081    1.42          30129    1.39          30230    1.50          30263    1.52          30296    1.53           30687    1.35          39491    1.38
                                                              30044    1.34          30082    1.42          30132    1.44          30231    1.50          30264    1.52          30300    1.54           30707    1.33          40100    1.59
                                                              30052    1.38          30083    1.42          30133    1.44          30232    1.50          30265    1.52          30301    1.54           30718    1.33          40101    1.59
                                                              30053    1.38          30084    1.42          30134    1.44          30233    1.50          30266    1.52          30302    1.54           30770    1.49          40119    1.59
                                                              30054    1.38          30085    1.42          30135    1.44          30234    1.50          30270    1.52          30303    1.54           30771    1.49          41120    1.55
                                                              30055    1.38          30086    1.42          30136    1.44          30235    1.50          30271    1.52          30304    1.54           30772    1.49          41121    1.55
                                                              30056    1.38          30092    1.42          30142    1.44          30236    1.50          30272    1.52          30305    1.54           30773    1.49          41122    1.56
                                                              30058    1.38          30093    1.42          30143    1.44          30237    1.50          30273    1.52          30306    1.54           30774    1.49          41123    1.57
                                                              30059    1.38          30094    1.42          30144    1.44          30238    1.50          30274    1.52          30320    1.54           30775    1.49          41124    1.56
                                                              30060    1.41          30100    1.43          30145    1.44          30239    1.50          30275    1.52          30321    1.54           30776    1.49          41126    1.58
                                                              30061    1.41          30101    1.43          30146    1.44          30240    1.51          30276    1.52          30322    1.54           30777    1.49          41127    1.57
                                                              30062    1.41          30102    1.43          30154    1.45          30241    1.51          30277    1.52          30323    1.54           30778    1.49          41200    1.60
                                                              30063    1.41          30103    1.43          30156    1.45          30242    1.51          30278    1.52          30324    1.54           30779    1.49          41201    1.60
                                                              30064    1.41          30104    1.43          30162    1.45          30243    1.51          30279    1.52          30325    1.54           30780    1.49          41215    1.60
                                                              30065    1.41          30105    1.43          30164    1.45          30244    1.51          30280    1.53          30326    1.54           30781    1.49          41216    1.60
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                              30066    1.41          30106    1.43          30172    1.45          30245    1.51          30281    1.53          30332    1.48           30782    1.49          41217    1.60
                                                              30067    1.41          30108    1.43          30173    1.45          30246    1.51          30282    1.53          30333    1.48           30783    1.49          41218    1.60
                                                              30068    1.41          30109    1.43          30174    1.45          30248    1.51          30283    1.53          30334    1.48           30784    1.49          45110    1.59
                                                              30069    1.41          30112    1.43          30175    1.45          30249    1.51          30284    1.53          30335    1.48           30785    1.49          45111    1.59
                                                              30070    1.41          30113    1.43          30176    1.45          30250    1.51          30285    1.53          30336    1.48           30786    1.49          45152    1.58
                                                              30071    1.41          30114    1.43          30182    1.46          30251    1.51          30286    1.53          30342    1.48           30790    1.50          45153    1.58
                                                              30072    1.41          30115    1.43          30183    1.46          30252    1.51          30288    1.53          30344    1.48           30791    1.50
                                                              30073    1.41          30116    1.43          30184    1.46          30253    1.51          30289    1.53          30354    1.47           30792    1.50
                                                              30074    1.41          30122    1.39          30185    1.46          30254    1.51          30290    1.53          30364    1.47           30793    1.50
                                                              30075    1.41          30123    1.39          30186    1.46          30255    1.51          30291    1.53          30374    1.47           30794    1.50




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                            1.3
  alfer
                              ®




combitech system · Basis
                                       ®




Explanations

Explanations                                                                                  Explanations Brand Names

1. Product design                                                                             Important Note!
                                                                                                                                                                          ®

All products are available as presented in this catalogue. We reserve the                     The following trademarks (®, M. R.) are registered for the alfer aluminium
right to make modifications in the interest of technical progress and prod-                   Gesellschaft mbH, D-79793 Wutoeschingen, (as of: 1. 5. 2008)
uct improvement.

2. Technical data
All technical diagrams and dimensions quoted are non-binding. The di-
                                                                                              alfer
                                                                                                     ®
                                                                                                                             EU FL CH USA
mensions indicated are approximate and may deviate slightly.                                  alferceram
                                                                                                                     ®
                                                                                                                             D A B F I L NL P CH
3. Aluminium quality standard
                                                                                              alferoxal
                                                                                                             ®
                                                                                                                             D A B F I L NL P CH
The quality standard of the material used complies with DIN 1748.                             cabelino
                                                                                                             ®
                                                                                                                             EU CH USA
4. Right of use (shops/displays)
                                                                                              clipstech
                                                                                                                 ®
                                                                                                                             D A B F I L NL USA
The shops are made available free of charge. They remain the property of                      combitech
                                                                                                                     ®
                                                                                                                             D A B CZ DK F FIN H I
                                                                                                                             L NL P PL CH FL USA
         ®                                                        ®

alfer and are solely intended for presentation of alfer products.

5. Right of use (catalogue and data media)                                                    ferroplatan
                                                                                                                         ®
                                                                                                                             EU
                                                                                                                             EU




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
This catalogue or data media is intended for the sole use of the recipient.                              ®

                                                                                              logika
It must not be loaned or given to third parties. It remains the exclusive prop-
               ®

erty of alfer aluminium Gesellschaft mbH, Wutoeschingen.                                      orditech
                                                                                                             ®
                                                                                                                             EU
         ®

alfer reserves the right to demand the return of the catalogue or data
media, if it is used for purposes of unfair competition. The catalogue or the                 The use of these rights is permitted only upon expressed authorization by
                                                                                                     ®

data media may not be reprinted or reproduced, either in part or in full, nor                 alfer aluminium Gesellschaft mbH, D-79793 Wutoeschingen.
may the illustrations or the design be imitated.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.4
                                                            combitech system · Basis
                                                                                                   ®




                                                            Range summary


                                                              Page 1.12–1.26                                                                              System profiles
                                                                                                                                                          Uncoated aluminium
                                                                                                                                                          Anodized aluminium
                                                                                                                                                          Powder-coated aluminium
                                                                                                                                                          Aluminium, vibratory finishing




                                                              Page 1.27–1.32                                                                              System profiles
                                                                                                                                                          Plastic (hard PVC)
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                              Page 1.33–1.34                                                                              Metric threaded rods and threaded tubes
                                                                                                                                                          Galvanized steel
                                                                                                                                                          Stainless steel V2A
                                                                                                                                                          Brass
                                                                                                                                                          Plastic (PA)




                                                              Page 1.35–1.36                                                                              System accessories
                                                                                                                                                          Gusset
                                                                                                                                                          Step drill
                                                                                                                                                          Alu-Magic
                                                                                                                                                          Universal deburrer




                                                              Page 1.36–1.39                                                                              System accessories
                                                                                                                                                          Plugs
                                                                                                                                                          Caps
                                                                                                                                                          Furniture rollers
                                                                                                                                                          Adjustable feet



                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                            1.5
  alfer
                              ®




combitech system · Basis
                                       ®




Range summary


  Page 1.39–1.40                                                                              System accessories
                                                                                              Compression springs
                                                                                              Tension springs
                                                                                              Countersunk screws




  Page 1.41–1.44                                                                              System accessories
                                                                                              Hexagonal nuts
                                                                                              Hexagonal cap nuts
                                                                                              Square nuts




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
                                                                                              Wing nuts




  Page 1.45                                                                                   System accessories
                                                                                              Ring nuts
                                                                                              Knurled nuts
                                                                                              Screw-in nuts




  Page 1.46–1.48                                                                              System accessories
                                                                                              Various accessories with thread




  Page 1.49–1.54                                                                              System accessories
                                                                                              Nut-washer sets
                                                                                              Washers
                                                                                              Serrated lock washers




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.6
                                                            combitech system · Basis
                                                                                                   ®




                                                            Range summary


                                                              Page 1.55–1.58                                                                              Tool assortment
                                                                                                                                                          Mitre boxes and accessories
                                                                                                                                                          Multivice




                                                              Page 1.59–1.60                                                                              Tool assortment
                                                                                                                                                          Saws
                                                                                                                                                          Rulers
                                                                                                                                                          Angles
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                            1.7
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove – for 1001 ideas




Wine rack                                     Coffee table                                  Bar stool                                      CD rack




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Hat rack                                      Shoe rack                                     Display cabinet for models                     Hi-fi rack




Swing seat                                    Pot mat                                       Laundry stand                                  Computer table




Trellis                                       Beanpole                                      Composter                                      Entrance gate, two sections




Forcing bed cover                             Fence unit with small door                    Insect screen door                             Folding table



      ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.8
                                                            combitech system · Basis
                                                                                                     ®




                                                            Profiles with the unique drill alignment groove – for 1001 ideas




                                                            Plant trolley                                 Hothouse                                      Garden bench                                   Folding trestle
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Storage rack                                  Garbage bag holder                            Bottle carrier                                 Pull-out trestle




                                                            Work bench                                    Hand truck                                    Dustpan                                        Boot dryer




                                                            Plinth for washing machine                    Folding ladder                                Camping chair                                  Trailer step




                                                            Tractor extension for cutter bar mower        Tripod barbecue                               Rabbit hutch                                   Dog box



                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                            1.9
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove – for 1001 ideas




Mobile tournament horse box                   Pull-out water canister stand                 Pigeon box                                     Mobile observation chair




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Easel                                         Market stall                                  Goal set                                       Swing




Pinwheel                                      Marble run                                    Hand cart                                      Bicycle trailer




Ski rack                                      Soap box racing car                           Sledge                                         Basement grid security device




Door stopper                                  Support                                       Tensioner                                      Folding greenhouse table



     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.10
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove – the benefits

                                                                                                           The drill alignment groove
                                                                                                           These help DIY enthusiasts and professionals to drill in exactly the right place. On a round tube e.g. there are four
                                                                                                           drill alignment grooves – one every 90°. If you want to drill several holes one after the other on a standard round
                                                                                                           tube, it is very difficult to align them properly. But if you have a drill alignment groove, you even know where to
                                                                                                           drill the hole at the other end of the tube.
                                                                                                           If you want to drill through a tube, you have major problems getting the drill to come out exactly vertically on the
                                                                                                           other side because the drill usually goes astray in the round section. If you have drill alignment grooves, you sim-
                                                                                                           ply measure the position of the required hole from the edge and drill through the first wall. Afterwards you turn the
                                                                                                           tube around 180°, measure the required position of the hole again and drill through this wall too. You now have
                                                                                                           both holes exactly opposite one another.
                                                                                                           As both holes are drilled from the outside inwards, you also do not get any drill burrs on the outside holes.
                                                            The drill alignment groove



                                                                                                           Fit in and over each other
                                                                                                                                                 ®

                                                                                                           Another feature of combitech is that the profiles fit inside and on top of each other. This is due to the fact that
                                                                                                           the size of the profiles is in line with the size of the metric threaded rods. That is why a round tube fits over the
                                                                                                           next smaller threaded rod or a round tube fits into the next bigger round tube.
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                                                                           Metric threaded rod in tube
                                                                                                           A square tube also fits into a square tube, a round tube into a round tube, a bracket to a square tube, a flat bar
                                                            Fit in and over each other                     on a rectangular tube, a threaded rod into a square tube, etc. This allows you to make telescopic rods or shafts
                                                                                                           and many other objects.

                                                                                                                                                 ®

                                                                                                           Another feature of combitech is that there are many profiles not only made of aluminium but also plastic. Both
                                                                                                           materials are rust-proof and weather-resistant. On many units it is not necessary to use sturdy aluminium, you can
                                                                                                           also resort to cheaper plastic.




                                                                                                           Accessory profiles
                                                                                                                                                 ®

                                                                                                           Another feature of combitech is that there are many accessory profiles, which increases the variety of applica-
                                                                                                           tions. For example there are square tubes, 1 branch; square-U 2, branches; tubes, 1 branch; tubes, 2 branches
                                                                                                           180°; tubes, 2 branches 90°; double tubes; triple tubes; tube-tube 90°; tube sleeves; square tubes, 1 branch off-
                                                            Metric threaded rod in tube
                                                                                                           set; square tubes, 2 branches offset; etc. The next smallest threaded rods or round pipes also fit into these tubes.




                                                                                                           Standard accessories
                                                                                                                                                 ®

                                                                                                           Another feature of combitech are the standard accessories. These include end caps, a step drill, gussets, nuts,
                                                                                                           base discs, rubber buffers, springs, ring nuts, knurled nuts, screw-in nuts, a handwheel, connecting bushes,
                                                                                                           hinged plates, eyes bolts, tensioners, setting rings, etc. These parts further increase the variety of applications.




                                                            Accessory profiles




                                                            Standard accessories



                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.11
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Aluminium

Round tube




Min. OU = 5 pcs.


 Colour                            Dim. a                       Dim. b                         for                  Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                          7.5 mm                       1.0 mm                         M5                       loose              4001116 25002 6 4001116 25022 4
 uncoated                         11.5 mm                       1.5 mm                         M8                       loose              4001116 25004 0 4001116 25024 8
 uncoated                         15.5 mm                       1.5 mm                        M 12                      loose              4001116 25006 4 4001116 25026 2




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 uncoated                         19.5 mm                       1.5 mm                        M 16                      loose              4001116 25008 8 4001116 25028 6
 uncoated                         23.5 mm                       1.5 mm                        M 20                      loose              4001116 25010 1 4001116 25030 9
 uncoated                         29.5 mm                       2.4 mm                        M 24                      loose              4001116 25012 5 4001116 25032 3
 uncoated                         35.5 mm                       2.4 mm                        M 30                      loose              4001116 25014 9 4001116 25034 7


Round bar




Min. OU = 5 pcs.


 Colour                                                        Dim. a                                               Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                                                     7.5 mm                                                    loose              4001116 25082 8 4001116 25102 3
 uncoated                                                    11.5 mm                                                    loose              4001116 25084 2 4001116 25104 7
 uncoated                                                    15.5 mm                                                    loose              4001116 25086 6 4001116 25106 1
 uncoated                                                    19.5 mm                                                    loose              4001116 25088 0 4001116 25108 5




                       User tips
                       If you want to insert a screw into the hole of a round tube, whether it is aluminium or plastic, you can make a thread there with a
                       thread cutter and screw in a metric screw. You also have the option of inserting a suitable plastic plug and screwing in a wood screw
                       that fits.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.12
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Aluminium

                                                            Square tube




                                                            Min. OU = 5 pcs.


                                                             Colour                              Dim. a                    Dim. b                     for                       Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                           7.5 mm                     1.0 mm                     M5                            loose              4001116 25162 7 4001116 25182 5
                                                             uncoated                          11.5 mm                     1.5 mm                     M8                            loose              4001116 25164 1 4001116 25184 9
                                                             uncoated                          15.5 mm                     1.5 mm                    M 12                           loose              4001116 25166 5 4001116 25186 3
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             uncoated                          19.5 mm                     1.5 mm                    M 16                           loose              4001116 25168 9 4001116 25188 7
                                                             uncoated                          23.5 mm                     1.5 mm                    M 20                           loose              4001116 25170 2 4001116 25190 0
                                                             uncoated                          29.5 mm                     2.4 mm                    M 24                           loose              4001116 25172 6 4001116 25192 4
                                                             uncoated                          35.5 mm                     2.4 mm                    M 30                           loose              4001116 25174 0 4001116 25194 8
                                                             Anodized aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             silver                            23.5 mm                     1.5 mm                    M 20                     shrink-wrapped           4001116 25171 9 4001116 25191 7
                                                             Powder-coated aluminium                                                                                                                     length: 1.00 m         length: 2.50 m
                                                             brilliant-white                   11.5 mm                     1.5 mm                     M8                      shrink-wrapped           4001116 21164 5 4001116 21184 3
                                                             brilliant-white                   15.5 mm                     1.5 mm                    M 12                     shrink-wrapped           4001116 21166 9 4001116 21186 7
                                                             brilliant-white                   19.5 mm                     1.5 mm                    M 16                     shrink-wrapped           4001116 21168 3 4001116 21188 1
                                                             brilliant-white                   23.5 mm                     1.5 mm                    M 20                     shrink-wrapped           4001116 21170 6 4001116 21190 4


                                                            Square rod




                                                            Min. OU = 5 pcs.


                                                             Colour                                                        Dim. a                                               Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                                                     7.5 mm                                                    loose              4001116 25242 6 4001116 25262 4
                                                             uncoated                                                    11.5 mm                                                    loose              4001116 25244 0 4001116 25264 8
                                                             uncoated                                                    15.5 mm                                                    loose              4001116 25246 4 4001116 25266 2
                                                             uncoated                                                    19.5 mm                                                    loose              4001116 25248 8 4001116 25268 6




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.13
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Aluminium

Rectangular tube




Min. OU = 5 pcs.


 Colour                      Dim. a                  Dim. b                  Dim. c                  for            Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                   7.5 mm                  12.5 mm                 1.0 mm                   M5                 loose              4001116 25322 5 4001116 25342 3
 uncoated                  11.5 mm                  19.5 mm                 1.5 mm                   M8                 loose              4001116 25324 9 4001116 25344 7
 uncoated                  15.5 mm                  27.5 mm                 1.5 mm                  M 12                loose              4001116 25326 3 4001116 25346 1




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 uncoated                  19.5 mm                  35.5 mm                 1.5 mm                  M 16                loose              4001116 25328 7 4001116 25348 5
 uncoated                  23.5 mm                  43.5 mm                 1.5 mm                  M 20                loose              4001116 25330 0 4001116 25350 8
 uncoated                  29.5 mm                  53.6 mm                 2.4 mm                  M 24                loose              4001116 25332 4 4001116 25352 2
 uncoated                  35.5 mm                  65.6 mm                 2.4 mm                  M 30                loose              4001116 25334 8 4001116 25354 6


Square U




Min. OU = 5 pcs.


 Colour                                     Dim. a                             Dim. b                               Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                                   7.5 mm                            1.0 mm                                    loose              4001116 25402 4 4001116 25422 2
 uncoated                                  11.5 mm                            1.5 mm                                    loose              4001116 25404 8 4001116 25424 6
 uncoated                                  15.5 mm                            1.5 mm                                    loose              4001116 25406 2 4001116 25426 0
 uncoated                                  19.5 mm                            1.5 mm                                    loose              4001116 25408 6 4001116 25428 4
 uncoated                                  23.5 mm                            1.5 mm                                    loose              4001116 25410 9 4001116 25430 7
 uncoated                                  29.5 mm                            2.4 mm                                    loose              4001116 25412 3 4001116 25432 1
 uncoated                                  35.5 mm                            2.4 mm                                    loose              4001116 25414 7 4001116 25434 5
 Anodized aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 silver                                    23.5 mm                            1.5 mm                              shrink-wrapped           4001116 25411 6 4001116 25431 4
 Powder-coated aluminium                                                                                                                     length: 1.00 m         length: 2.50 m
 brilliant-white                            7.5 mm                            1.0 mm                              shrink-wrapped           4001116 21402 8 4001116 21422 6
 brilliant-white                           11.5 mm                            1.5 mm                              shrink-wrapped           4001116 21404 2 4001116 21424 0
 brilliant-white                           15.5 mm                            1.5 mm                              shrink-wrapped           4001116 21406 6 4001116 21426 4
 brilliant-white                           23.5 mm                            1.5 mm                              shrink-wrapped           4001116 21410 3 4001116 21430 1




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.14
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Aluminium

                                                            Rectangular U




                                                            Min. OU = 5 pcs.


                                                             Colour                             Dim. a                    Dim. b                    Dim. c                      Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                          7.5 mm                   12.5 mm                     1.0 mm                          loose              4001116 25482 6 4001116 25502 1
                                                             uncoated                        11.5 mm                    19.5 mm                     1.5 mm                          loose              4001116 25484 0 4001116 25504 5
                                                             uncoated                        15.5 mm                    27.5 mm                     1.5 mm                          loose              4001116 25486 4 4001116 25506 9
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             uncoated                        19.5 mm                    35.5 mm                     1.5 mm                          loose              4001116 25488 8 4001116 25508 3
                                                             uncoated                        23.5 mm                    43.5 mm                     1.5 mm                          loose              4001116 25490 1 4001116 25510 6
                                                             uncoated                        29.5 mm                    53.6 mm                     2.4 mm                          loose              4001116 25492 5 4001116 25512 0
                                                             uncoated                        35.5 mm                    65.6 mm                     2.4 mm                          loose              4001116 25494 9 4001116 25514 4
                                                             Powder-coated aluminium                                                                                                                     length: 1.00 m         length: 2.50 m
                                                             brilliant-white                 11.5 mm                    19.5 mm                     1.5 mm                    shrink-wrapped           4001116 21484 4 4001116 21504 9
                                                             brilliant-white                 15.5 mm                    27.5 mm                     1.5 mm                    shrink-wrapped           4001116 21486 8 4001116 21506 3
                                                             brilliant-white                 19.5 mm                    35.5 mm                     1.5 mm                    shrink-wrapped           4001116 21488 2 4001116 21508 7


                                                            Angle, equal-sided




                                                            Min. OU = 5 pcs.


                                                             Colour                                      Dim. a                            Dim. b                               Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                                   7.5 mm                            1.0 mm                                    loose              4001116 25562 5 4001116 25582 3
                                                             uncoated                                  11.5 mm                            1.5 mm                                    loose              4001116 25564 9 4001116 25584 7
                                                             uncoated                                  15.5 mm                            1.5 mm                                    loose              4001116 25566 3 4001116 25586 1
                                                             uncoated                                  19.5 mm                            1.5 mm                                    loose              4001116 25568 7 4001116 25588 5
                                                             uncoated                                  23.5 mm                            1.5 mm                                    loose              4001116 25570 0 4001116 25590 8
                                                             uncoated                                  29.5 mm                            2.4 mm                                    loose              4001116 25572 4 4001116 25592 2
                                                             uncoated                                  35.5 mm                            2.4 mm                                    loose              4001116 25574 8 4001116 25594 6
                                                             Powder-coated aluminium                                                                                                                     length: 1.00 m         length: 2.50 m
                                                             brilliant-white                           15.5 mm                            1.5 mm                              shrink-wrapped           4001116 21566 7 4001116 21586 5
                                                             brilliant-white                           19.5 mm                            1.5 mm                              shrink-wrapped           4001116 21568 1 4001116 21588 9
                                                             brilliant-white                           23.5 mm                            1.5 mm                              shrink-wrapped           4001116 21570 4 4001116 21590 2
                                                             brilliant-white                           29.5 mm                            2.4 mm                              shrink-wrapped           4001116 21572 8 4001116 21592 6



                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.15
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Aluminium

Angle, unequal-sided




Min. OU = 5 pcs.


 Colour                             Dim. a                    Dim. b                    Dim. c                      Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                          7.5 mm                   12.5 mm                     1.0 mm                          loose              4001116 25642 4 4001116 25662 2
 uncoated                         11.5 mm                   19.5 mm                     1.5 mm                          loose              4001116 25644 8 4001116 25664 6
 uncoated                         15.5 mm                   27.5 mm                     1.5 mm                          loose              4001116 25646 2 4001116 25666 0




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 uncoated                         19.5 mm                   35.5 mm                     1.5 mm                          loose              4001116 25648 6 4001116 25668 4
 uncoated                         23.5 mm                   43.5 mm                     1.5 mm                          loose              4001116 25650 9 4001116 25670 7
 uncoated                         29.5 mm                   53.6 mm                     2.4 mm                          loose              4001116 25652 3 4001116 25672 1
 uncoated                         35.5 mm                   65.6 mm                     2.4 mm                          loose              4001116 25654 7 4001116 25674 5
 Powder-coated aluminium                                                                                                                     length: 1.00 m         length: 2.50 m
 brilliant-white                  15.5 mm                   27.5 mm                     1.5 mm                    shrink-wrapped           4001116 21646 6 4001116 21666 4
 brilliant-white                  19.5 mm                   35.5 mm                     1.5 mm                    shrink-wrapped           4001116 21648 0 4001116 21668 8
 brilliant-white                  23.5 mm                   43.5 mm                     1.5 mm                    shrink-wrapped           4001116 21650 3 4001116 21670 1


Flat bar




Min. OU = 5 pcs.


 Colour                                      Dim. a                            Dim. b                               Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                                   7.5 mm                            1.5 mm                                    loose              4001116 25802 2 4001116 25822 0
 uncoated                                  11.5 mm                            2.0 mm                                    loose              4001116 25804 6 4001116 25824 4
 uncoated                                  15.5 mm                            2.0 mm                                    loose              4001116 25806 0 4001116 25826 8
 uncoated                                  19.5 mm                            2.0 mm                                    loose              4001116 25808 4 4001116 25828 2
 uncoated                                  23.5 mm                            2.0 mm                                    loose              4001116 25810 7 4001116 25830 5
 uncoated                                  29.5 mm                            3.0 mm                                    loose              4001116 25812 1 4001116 25832 9
 uncoated                                  35.5 mm                            3.0 mm                                    loose              4001116 25814 5 4001116 25834 3
 Powder-coated aluminium                                                                                                                     length: 1.00 m         length: 2.50 m
 brilliant-white                           15.5 mm                            2.0 mm                              shrink-wrapped           4001116 21806 4 4001116 21826 2
 brilliant-white                           19.5 mm                            2.0 mm                              shrink-wrapped           4001116 21808 8 4001116 21828 6
 brilliant-white                           23.5 mm                            2.0 mm                              shrink-wrapped           4001116 21810 1 4001116 21830 9




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.16
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Aluminium

                                                            Square T




                                                            Min. OU = 5 pcs.


                                                             Colour                                     Dim. a                                Dim. b                            Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                                   7.5 mm                                1.0 mm                                loose              4001116 25722 3 4001116 25742 1
                                                             uncoated                                  11.5 mm                                1.5 mm                                loose              4001116 25724 7 4001116 25744 5
                                                             uncoated                                  15.5 mm                                1.5 mm                                loose              4001116 25726 1 4001116 25746 9
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             uncoated                                  19.5 mm                                1.5 mm                                loose              4001116 25728 5 4001116 25748 3


                                                            T-profile




                                                            Min. OU = 5 pcs.


                                                             Colour                                 Dim. a                             Dim. b                            Dim. c                      Packaging                  EAN / Item no.
                                                             Uncoated aluminium                                                                                                                                                 length: 1.00 m
                                                             uncoated                             14.0 mm                             7.5 mm                             1.0 mm                          loose                4001116 28671 1


                                                            Square H




                                                            Min. OU = 5 pcs.


                                                             Colour                           Dim. a                        Dim. b                      Dim. c                  Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                        7.5 mm                       3.25 mm                       1.0 mm                      loose              4001116 28670 4
                                                             uncoated                       23.5 mm                       11.0 mm                       1.5 mm                      loose              4001116 28700 8 4001116 28720 6




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.17
  alfer
                              ®




combitech system · Basis
                                        ®




Profiles with the unique drill alignment groove · Aluminium

Square tube, 1 branch




Min. OU = 5 pcs.


 Colour                        Dim. a                Dim. b                Dim. c               for                 Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                     7.5 mm                14.0 mm               1.0 mm                M5                      loose              4001116 25882 4 4001116 25902 9
 uncoated                    11.5 mm                21.5 mm               1.5 mm                M8                      loose              4001116 25884 8 4001116 25904 3
 uncoated                    15.5 mm                29.5 mm               1.5 mm               M 12                     loose              4001116 25886 2 4001116 25906 7




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 uncoated                    19.5 mm                37.5 mm               1.5 mm               M 16                     loose              4001116 25888 6 4001116 25908 1
 uncoated                    23.5 mm                45.5 mm               1.5 mm               M 20                     loose              4001116 25890 9 4001116 25910 4
 uncoated                    29.5 mm                56.6 mm               2.4 mm               M 24                     loose              4001116 25892 3 4001116 25912 8
 uncoated                    35.5 mm                68.6 mm               2.4 mm               M 30                     loose              4001116 25894 7 4001116 25914 2
 Anodized aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 silver                      23.5 mm                45.5 mm               1.5 mm               M 20               shrink-wrapped           4001116 25891 6 4001116 25911 1
 Powder-coated aluminium                                                                                                                     length: 1.00 m         length: 2.50 m
 brilliant-white             23.5 mm                45.5 mm               1.5 mm               M 20               shrink-wrapped           4001116 21890 3 4001116 21910 8


Square U, 2 branches 180º




Min. OU = 5 pcs.


 Colour                           Dim. a                        Dim. b                       Dim. c                 Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated                         7.5 mm                      20.5 mm                       1.0 mm                      loose              4001116 25962 3 4001116 25982 1
 uncoated                      11.5 mm                        31.5 mm                       1.5 mm                      loose              4001116 25964 7 4001116 25984 5
 uncoated                      15.5 mm                        43.5 mm                       1.5 mm                      loose              4001116 25966 1 4001116 25986 9
 uncoated                      19.5 mm                        55.5 mm                       1.5 mm                      loose              4001116 25968 5 4001116 25988 3
 uncoated                      23.5 mm                        67.5 mm                       1.5 mm                      loose              4001116 25970 8 4001116 25990 6
 uncoated                      29.5 mm                        83.7 mm                       2.4 mm                      loose              4001116 25972 2 4001116 25992 0
 uncoated                      35.5 mm                       101.7 mm                       2.4 mm                      loose              4001116 25974 6 4001116 25994 4




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.18
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Aluminium

                                                            Square tube, 2 branches 180º




                                                            Min. OU = 5 pcs.


                                                             Colour                      Dim. a                  Dim. b                  Dim. c                  for            Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                   7.5 mm                  20.5 mm                 1.0 mm                   M5                 loose              4001116 28669 8
                                                             uncoated                  23.5 mm                  67.5 mm                 1.5 mm                  M 20                loose              4001116 26090 2 4001116 26110 7


                                                            Square tube, 1 branch offset
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 5 pcs.


                                                             Colour                  Dim. a              Dim. b             Dim. c                Dim. d               for      Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated               7.5 mm             14.0 mm              1.0 mm               4.5 mm                M5           loose              4001116 28672 8
                                                             uncoated              23.5 mm             45.5 mm              1.5 mm             19.5 mm              M 20            loose              4001116 28701 5 4001116 28721 3


                                                            Square tube, 2 branches inside




                                                            Min. OU = 5 pcs.


                                                             Colour                      Dim. a                  Dim. b                  Dim. c                  for            Packaging               EAN / Item no.          EAN / Item no.
                                                             Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             uncoated                   7.5 mm                  14.0 mm                 1.0 mm                   M5                 loose              4001116 25922 7
                                                             uncoated                  23.5 mm                  43.5 mm                 1.5 mm                  M 20                loose              4001116 25930 2 4001116 25950 0




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.19
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Aluminium

Square tube, 2 branches offset




Min. OU = 5 pcs.


 Colour             Dim. a                  Dim. b              Dim. c              Dim. d               for        Packaging               EAN / Item no.          EAN / Item no.
 Uncoated aluminium                                                                                                                          length: 1.00 m         length: 2.50 m
 uncoated           7.5 mm                 14.0 mm             1.0 mm               4.5 mm               M5             loose              4001116 26002 5
 uncoated         23.5 mm                  45.5 mm             1.5 mm             19.5 mm               M 20            loose              4001116 26010 0 4001116 26030 8


Tube, 1 short branch




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 Colour                     Dim. a                   Dim. b                 Dim. c                   Dim. d                  for         Packaging                  EAN / Item no.
 Uncoated aluminium                                                                                                                                                 length: 1.00 m
 uncoated                   7.5 mm                 12.5 mm                  1.5 mm                  5.5 mm                   M5              loose                4001116 26062 9
 uncoated                 11.5 mm                  19.5 mm                  2.0 mm                  8.5 mm                   M8              loose                4001116 26064 3
 uncoated                 15.5 mm                  27.5 mm                  2.5 mm                 12.5 mm                   M 12            loose                4001116 26066 7
 uncoated                 19.5 mm                  35.5 mm                  3.0 mm                 16.5 mm                   M 16            loose                4001116 26068 1


Tube, 1 short branch, vibratory finishing




Min. OU = 5 pcs.


 length                   Colour                 Dim. a            Dim. b           Dim. c            Dim. d           for               Packaging                  EAN / Item no.
 Aluminium, vibratory finishing
 19.5 mm            vibratory finishing          7.5 mm          12.5 mm           1.5 mm            5.5 mm            M5           SS bag cont. 2 pcs.           4001116 26042 1
 27.5 mm            vibratory finishing        11.5 mm           19.5 mm           2.0 mm            8.5 mm            M8           SS bag cont. 2 pcs.           4001116 26044 5
 35.5 mm            vibratory finishing        15.5 mm           27.5 mm           2.5 mm           12.5 mm           M 12          SS bag cont. 2 pcs.           4001116 26046 9
 43.5 mm            vibratory finishing        19.5 mm           35.5 mm           3.0 mm           16.5 mm           M 16          SS bag cont. 2 pcs.           4001116 26048 3



     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.20
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Aluminium

                                                            Tube, 1 long branch




                                                            Min. OU = 5 pcs.


                                                             Colour                     Dim. a                   Dim. b                 Dim. c                   Dim. d                  for         Packaging                  EAN / Item no.
                                                             Uncoated aluminium                                                                                                                                                 length: 1.00 m
                                                             uncoated                 11.5 mm                  43.5 mm                  2.0 mm                  8.5 mm                   M8              loose                4001116 26144 2
                                                             uncoated                 19.5 mm                  65.6 mm                  3.0 mm                 16.5 mm                   M 16            loose                4001116 26148 0


                                                            Tube, 1 long branch, vibratory finishing
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 5 pcs.


                                                             length                   Colour                 Dim. a            Dim. b           Dim. c            Dim. d           for               Packaging                  EAN / Item no.
                                                             Aluminium, vibratory finishing
                                                             27.5 mm            vibratory finishing        11.5 mm           43.5 mm           2.0 mm            8.5 mm            M8           SS bag cont. 2 pcs.           4001116 26124 4
                                                             43.5 mm            vibratory finishing        19.5 mm           65.6 mm           3.0 mm           16.5 mm           M 16          SS bag cont. 2 pcs.           4001116 26128 2


                                                            Round bar
                                                            Can be combined with the tube, 1 branch short, item no. 26062 and 26042 dim. d = 5.5 mm) for the hinge.




                                                            Min. OU = 5 pcs.


                                                             Colour                                                                   Dim. a                                                         Packaging                  EAN / Item no.
                                                             Uncoated aluminium                                                                                                                                                 length: 1.00 m
                                                             uncoated                                                                5.3 mm                                                              loose                4001116 28668 1




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.21
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Aluminium

Tube, 2 branches 180º




Min. OU = 5 pcs.


 Colour                     Dim. a                   Dim. b                 Dim. c                   Dim. d                  for         Packaging                  EAN / Item no.
 Uncoated aluminium                                                                                                                                                 length: 1.00 m
 uncoated                 11.5 mm                  43.5 mm                  2.0 mm                  8.5 mm                   M8              loose                4001116 26224 1
 uncoated                 19.5 mm                  65.5 mm                  3.0 mm                 16.5 mm                   M 16            loose                4001116 26228 9


Tube, 2 branches 180º, vibratory finishing




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 length                        Colour            Dim. a            Dim. b           Dim. c            Dim. d           for               Packaging                  EAN / Item no.
 Aluminium, vibratory finishing
 27.5 mm           vibratory finishing         11.5 mm           43.5 mm           2.0 mm            8.5 mm            M8           SS bag cont. 2 pcs.           4001116 26204 3
 43.5 mm           vibratory finishing         19.5 mm           65.5 mm           3.0 mm           16.5 mm           M 16          SS bag cont. 1 pc.            4001116 26208 1


Tube, 2 branches 90º




Min. OU = 5 pcs.


 Colour                     Dim. a                   Dim. b                 Dim. c                   Dim. d                  for         Packaging                  EAN / Item no.
 Uncoated aluminium                                                                                                                                                 length: 1.00 m
 uncoated                 11.5 mm                  28.8 mm                  2.0 mm                  8.5 mm                   M8              loose                4001116 26304 0
 uncoated                 19.5 mm                  51.8 mm                  3.0 mm                 16.5 mm                   M 16            loose                4001116 26308 8




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.22
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Aluminium

                                                            Tube, 2 branches 90º, vibratory finishing




                                                            Min. OU = 5 pcs.


                                                             length                   Colour                 Dim. a            Dim. b           Dim. c            Dim. d           for               Packaging                  EAN / Item no.
                                                             Aluminium, vibratory finishing
                                                             27.5 mm            vibratory finishing        11.5 mm           28.8 mm           2.0 mm            8.5 mm            M8           SS bag cont. 2 pcs.           4001116 26284 5
                                                             43.5 mm            vibratory finishing        19.5 mm           51.8 mm           3.0 mm           16.5 mm           M 16          SS bag cont. 1 pc.            4001116 26288 3


                                                            Double tube
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 5 pcs.


                                                             Colour                          Dim. a                        Dim. b                      Dim. c                       for              Packaging                  EAN / Item no.
                                                             Uncoated aluminium                                                                                                                                                 length: 1.00 m
                                                             uncoated                      11.5 mm                       27.5 mm                      1.5 mm                        M8                   loose                4001116 26384 2
                                                             uncoated                      19.5 mm                       49.5 mm                      1.5 mm                       M 16                  loose                4001116 26388 0


                                                            Double tube, vibratory finishing




                                                            Min. OU = 5 pcs.


                                                             length                   Colour                        Dim. a              Dim. b              Dim. c              for                  Packaging                  EAN / Item no.
                                                             Aluminium, vibratory finishing
                                                             27.5 mm            vibratory finishing               11.5 mm             27.5 mm              1.5 mm               M8              SS bag cont. 2 pcs.           4001116 26364 4
                                                             43.5 mm            vibratory finishing               19.5 mm             49.5 mm              1.5 mm              M 16             SS bag cont. 1 pc.            4001116 26368 2




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.23
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Aluminium

Triple tube




Min. OU = 5 pcs.


 Colour                           Dim. a                       Dim. b                       Dim. c                       for             Packaging                  EAN / Item no.
 Uncoated aluminium                                                                                                                                                 length: 1.00 m
 uncoated                      11.5 mm                       43.5 mm                       1.5 mm                      M8                    loose                4001116 26464 1


Triple tube, vibratory finishing




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 length                   Colour                        Dim. a               Dim. b              Dim. c            for                   Packaging                  EAN / Item no.
 Aluminium, vibratory finishing
 27.5 mm            vibratory finishing               11.5 mm              43.5 mm              1.5 mm             M8                SS bag cont. 2 pcs.          4001116 26444 3


Tube-tube 90º




Min. OU = 5 pcs.


 Colour                      Dim. a                   Dim. b                  Dim. c                 Dim. d                    for       Packaging                  EAN / Item no.
 Uncoated aluminium                                                                                                                                                 length: 1.00 m
 uncoated                  11.5 mm                  25.0 mm                  1.5 mm                  8.5 mm                    M8            loose                4001116 26544 0




                       User tips
                       If, for example, you want to join two threaded rods together vertically, the tube-tube 90° profile lends itself to this. You can push
                       the threaded rod into the round tube. A hole is drilled into the square tube and a nut is pushed in. You can now screw a second
                       threaded rod into the nut giving you two vertical threaded rods on top of each other.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.24
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Aluminium

                                                            Tube-tube 90º, vibratory finshing




                                                            Min. OU = 5 pcs.


                                                             length                   Colour                  Dim. a             Dim. b           Dim. c          Dim. d           for               Packaging                  EAN / Item no.
                                                             Aluminium, vibratory finishing
                                                             27.5 mm            vibratory finishing         11.5 mm            25.0 mm           1.5 mm           8.5 mm          M8            SS bag cont. 2 pcs.           4001116 26524 2


                                                            Short tube sleeve
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 5 pcs.


                                                             Colour                          Dim. a                        Dim. b                      Dim. c                       for              Packaging                  EAN / Item no.
                                                             Uncoated aluminium                                                                                                                                                 length: 1.00 m
                                                             uncoated                      11.5 mm                       41.5 mm                      1.5 mm                        M8                   loose                4001116 26624 9
                                                             uncoated                      19.5 mm                       73.5 mm                      1.5 mm                       M 16                  loose                4001116 26628 7


                                                            Short tube sleeve, vibratory finishing




                                                            Min. OU = 5 pcs.


                                                             length                   Colour                        Dim. a              Dim. b              Dim. c              for                  Packaging                  EAN / Item no.
                                                             Aluminium, vibratory finishing
                                                             27.5 mm            vibratory finishing               11.5 mm             41.5 mm              1.5 mm               M8              SS bag cont. 2 pcs.           4001116 26604 1
                                                             43.5 mm            vibratory finishing               19.5 mm             73.5 mm              1.5 mm              M 16             SS bag cont. 2 pcs.           4001116 26608 9




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.25
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Aluminium

Long tube sleeve




Min. OU = 5 pcs.


 Colour                           Dim. a                        Dim. b                      Dim. c                        for            Packaging                  EAN / Item no.
 Uncoated aluminium                                                                                                                                                 length: 1.00 m
 uncoated                      11.5 mm                        65.5 mm                      1.5 mm                         M8                 loose                4001116 26704 8
 uncoated                      19.5 mm                      103.6 mm                       1.5 mm                      M 16                  loose                4001116 26708 6


Long tube sleeve, vibratory finishing




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 length                   Colour                       Dim. a                Dim. b             Dim. c              for                  Packaging                  EAN / Item no.
 Aluminium, vibratory finishing
 27.5 mm            vibratory finishing              11.5 mm               65.5 mm              1.5 mm              M8              SS bag cont. 2 pcs.           4001116 26684 3
 43.5 mm            vibratory finishing              19.5 mm              103.6 mm              1.5 mm             M 16             SS bag cont. 2 pcs.           4001116 26688 1




                       User tips
                       If you want to attach a round tube for example to another unit, then tube sleeves lend themselves to this. Take two of these tube
                       sleeves and join them together with screws or rivets. In the space created by this you can insert and fix your round tube and thus
                       attach it to another unit.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.26
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Plastic (hard PVC)

                                                            Round tube




                                                            Min. OU = 5 pcs.


                                                             Colour                        Dim. a                         Dim. b                          for                   Packaging               EAN / Item no.          EAN / Item no.
                                                             Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             white                         7.5 mm                        1.0 mm                          M5                         loose              4001116 21042 6 4001116 21062 4
                                                             white                       11.5 mm                         1.5 mm                          M8                         loose              4001116 21044 0 4001116 21064 8
                                                             white                       15.5 mm                         1.5 mm                         M 12                        loose              4001116 21046 4 4001116 21066 2
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             white                       19.5 mm                         1.5 mm                         M 16                        loose              4001116 21048 8 4001116 21068 6
                                                             white                       23.5 mm                         1.5 mm                         M 20                        loose              4001116 21050 1 4001116 21070 9
                                                             white                       29.5 mm                         2.4 mm                         M 24                        loose              4001116 21052 5 4001116 21072 3
                                                             white                       35.5 mm                         2.4 mm                         M 30                        loose              4001116 21054 9 4001116 21074 7


                                                            Round bar




                                                            Min. OU = 5 pcs.


                                                             Colour                                                     Dim. a                                                  Packaging               EAN / Item no.          EAN / Item no.
                                                             Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             white                                                      7.5 mm                                                      loose              4001116 21122 5 4001116 21142 3
                                                             white                                                    11.5 mm                                                       loose              4001116 21124 9 4001116 21144 7
                                                             white                                                    15.5 mm                                                       loose              4001116 21126 3 4001116 21146 1
                                                             white                                                    19.5 mm                                                       loose              4001116 21128 7 4001116 21148 5




                                                                                   User tips
                                                                                   If you want to insert a screw into the hole of a round tube, whether it is aluminium or plastic, you can make a thread there with a
                                                                                   thread cutter and screw in a metric screw. You also have the option of inserting a suitable plastic plug and screwing in a wood screw
                                                                                   that fits.




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.27
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Plastic (hard PVC)

Square tube




Min. OU = 5 pcs.


 Colour                        Dim. a                         Dim. b                          for                   Packaging               EAN / Item no.          EAN / Item no.
 Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
 white                         7.5 mm                        1.0 mm                          M5                         loose              4001116 21202 4 4001116 21222 2
 white                       11.5 mm                         1.5 mm                          M8                         loose              4001116 21204 8 4001116 21224 6
 white                       15.5 mm                         1.5 mm                         M 12                        loose              4001116 21206 2 4001116 21226 0




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 white                       19.5 mm                         1.5 mm                         M 16                        loose              4001116 21208 6 4001116 21228 4
 white                       23.5 mm                         1.5 mm                         M 20                        loose              4001116 21210 9 4001116 21230 7
 white                       29.5 mm                         2.4 mm                         M 24                        loose              4001116 21212 3 4001116 21232 1
 white                       35.5 mm                         2.4 mm                         M 30                        loose              4001116 21214 7 4001116 21234 5


Square rod




Min. OU = 5 pcs.


 Colour                                                     Dim. a                                                  Packaging               EAN / Item no.          EAN / Item no.
 Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
 white                                                      7.5 mm                                                      loose              4001116 21282 6 4001116 21302 1
 white                                                    11.5 mm                                                       loose              4001116 21284 0 4001116 21304 5
 white                                                    15.5 mm                                                       loose              4001116 21286 4 4001116 21306 9
 white                                                    19.5 mm                                                       loose              4001116 21288 8 4001116 21308 3




                       User tips
                       With a suitable plastic adhesive, available in any DIY shop, you can easily glue plastic profiles together.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.28
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Plastic (hard PVC)

                                                            Rectangular tube




                                                            Min. OU = 5 pcs.


                                                             Colour                  Dim. a                     Dim. b                 Dim. c                   for             Packaging               EAN / Item no.          EAN / Item no.
                                                             Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             white                  7.5 mm                  12.5 mm                    1.0 mm                   M5                  loose              4001116 21362 5 4001116 21382 3
                                                             white                 11.5 mm                  19.5 mm                    1.5 mm                   M8                  loose              4001116 21364 9 4001116 21384 7
                                                             white                 15.5 mm                  27.5 mm                    1.5 mm                  M 12                 loose              4001116 21366 3 4001116 21386 1
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             white                 19.5 mm                  35.5 mm                    1.5 mm                  M 16                 loose              4001116 21368 7 4001116 21388 5
                                                             white                 23.5 mm                  43.5 mm                    1.5 mm                  M 20                 loose              4001116 21370 0 4001116 21390 8
                                                             white                 29.5 mm                  53.6 mm                    2.4 mm                  M 24                 loose              4001116 21372 4 4001116 21392 2
                                                             white                 35.5 mm                  65.6 mm                    2.4 mm                  M 30                 loose              4001116 21374 8 4001116 21394 6


                                                            Square U




                                                            Min. OU = 5 pcs.


                                                             Colour                                    Dim. a                               Dim. b                              Packaging               EAN / Item no.          EAN / Item no.
                                                             Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             white                                  7.5 mm                                  1.0 mm                                  loose              4001116 21442 4 4001116 21462 2
                                                             white                                 11.5 mm                                  1.5 mm                                  loose              4001116 21444 8 4001116 21464 6
                                                             white                                 15.5 mm                                  1.5 mm                                  loose              4001116 21446 2 4001116 21466 0
                                                             white                                 19.5 mm                                  1.5 mm                                  loose              4001116 21448 6 4001116 21468 4
                                                             white                                 23.5 mm                                  1.5 mm                                  loose              4001116 21450 9 4001116 21470 7
                                                             white                                 29.5 mm                                  2.4 mm                                  loose              4001116 21452 3 4001116 21472 1
                                                             white                                 35.5 mm                                  2.4 mm                                  loose              4001116 21454 7 4001116 21474 5




                                                                                   User tips
                                                                                   Plastic profiles can easily be cleaned with a cloth and detergent or with special plastic cleaner. Harsh agents such as nitro thin-
                                                                                   ners or acetone should be avoided because these damage the surface.




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.29
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Plastic (hard PVC)

Rectangular U




Min. OU = 5 pcs.


 Colour                       Dim. a                         Dim. b                        Dim. c                   Packaging               EAN / Item no.          EAN / Item no.
 Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
 white                       7.5 mm                        12.5 mm                         1.0 mm                       loose              4001116 21522 3 4001116 21542 1
 white                      11.5 mm                        19.5 mm                         1.5 mm                       loose              4001116 21524 7 4001116 21544 5
 white                      15.5 mm                        27.5 mm                         1.5 mm                       loose              4001116 21526 1 4001116 21546 9




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 white                      19.5 mm                        35.5 mm                         1.5 mm                       loose              4001116 21528 5 4001116 21548 3
 white                      23.5 mm                        43.5 mm                         1.5 mm                       loose              4001116 21530 8 4001116 21550 6
 white                      29.5 mm                        53.6 mm                         2.4 mm                       loose              4001116 21532 2 4001116 21552 0
 white                      35.5 mm                        65.6 mm                         2.4 mm                       loose              4001116 21534 6 4001116 21554 4


Angle, equal-sided




Min. OU = 5 pcs.


 Colour                                    Dim. a                               Dim. b                              Packaging               EAN / Item no.          EAN / Item no.
 Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
 white                                  7.5 mm                                  1.0 mm                                  loose              4001116 21602 2 4001116 21622 0
 white                                 11.5 mm                                  1.5 mm                                  loose              4001116 21604 6 4001116 21624 4
 white                                 15.5 mm                                  1.5 mm                                  loose              4001116 21606 0 4001116 21626 8
 white                                 19.5 mm                                  1.5 mm                                  loose              4001116 21608 4 4001116 21628 2
 white                                 23.5 mm                                  1.5 mm                                  loose              4001116 21610 7 4001116 21630 5
 white                                 29.5 mm                                  2.4 mm                                  loose              4001116 21612 1 4001116 21632 9
 white                                 35.5 mm                                  2.4 mm                                  loose              4001116 21614 5 4001116 21634 3




                       User tips
                       With plastic profiles, care should be taken that they are only used to a limited extent outdoors, as they become brittle over time
                       due to UV rays.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.30
                                                            combitech system · Basis
                                                                                                   ®




                                                            Profiles with the unique drill alignment groove · Plastic (hard PVC)

                                                            Angle, unequal-sided




                                                            Min. OU = 5 pcs.


                                                             Colour                       Dim. a                         Dim. b                        Dim. c                   Packaging               EAN / Item no.          EAN / Item no.
                                                             Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             white                       7.5 mm                        12.5 mm                         1.0 mm                       loose              4001116 21682 4 4001116 21702 9
                                                             white                      11.5 mm                        19.5 mm                         1.5 mm                       loose              4001116 21684 8 4001116 21704 3
                                                             white                      15.5 mm                        27.5 mm                         1.5 mm                       loose              4001116 21686 2 4001116 21706 7
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             white                      19.5 mm                        35.5 mm                         1.5 mm                       loose              4001116 21688 6 4001116 21708 1
                                                             white                      23.5 mm                        43.5 mm                         1.5 mm                       loose              4001116 21690 9 4001116 21710 4
                                                             white                      29.5 mm                        53.6 mm                         2.4 mm                       loose              4001116 21692 3 4001116 21712 8
                                                             white                      35.5 mm                        65.6 mm                         2.4 mm                       loose              4001116 21694 7 4001116 21714 2


                                                            Square T




                                                            Min. OU = 5 pcs.


                                                             Colour                                    Dim. a                               Dim. b                              Packaging               EAN / Item no.          EAN / Item no.
                                                             Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
                                                             white                                  7.5 mm                                  1.0 mm                                  loose              4001116 21762 3 4001116 21782 1
                                                             white                                 11.5 mm                                  1.5 mm                                  loose              4001116 21764 7 4001116 21784 5
                                                             white                                 15.5 mm                                  1.5 mm                                  loose              4001116 21766 1 4001116 21786 9
                                                             white                                 19.5 mm                                  1.5 mm                                  loose              4001116 21768 5 4001116 21788 3




                                                                                   User tips
                                                                                   Plastic profiles are easy to saw or drill. The drill alignment groove naturally lends itself to drilling, as this prevents slippage when
                                                                                   drilling. If you heat up a plastic tube with a hairdryer, for example, it can be easily bent.




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.31
  alfer
                              ®




combitech system · Basis
                                       ®




Profiles with the unique drill alignment groove · Plastic (hard PVC)

Flat bar




Min. OU = 5 pcs.


 Colour                                    Dim. a                               Dim. b                              Packaging               EAN / Item no.          EAN / Item no.
 Plastic (hard PVC)                                                                                                                          length: 1.00 m         length: 2.50 m
 white                                  7.5 mm                                  1.5 mm                                  loose              4001116 21842 2 4001116 21862 0
 white                                 11.5 mm                                  2.0 mm                                  loose              4001116 21844 6 4001116 21864 4
 white                                 15.5 mm                                  2.0 mm                                  loose              4001116 21846 0 4001116 21866 8




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 white                                 19.5 mm                                  2.0 mm                                  loose              4001116 21848 4 4001116 21868 2
 white                                 23.5 mm                                  2.0 mm                                  loose              4001116 21850 7 4001116 21870 5
 white                                 29.5 mm                                  3.0 mm                                  loose              4001116 21852 1 4001116 21872 9
 white                                 35.5 mm                                  3.0 mm                                  loose              4001116 21854 5 4001116 21874 3




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.32
                                                            combitech system · Basis
                                                                                                   ®




                                                            Metric threaded rods

                                                            Metric threaded rod




                                                            Min. OU = 5 pcs.


                                                             Colour                                                         Dim.                                                Packaging               EAN / Item no.          EAN / Item no.
                                                             Galvanized steel                                                                                                                            length: 1.00 m         length: 2.50 m
                                                             galvanized                                                      M3                                                     loose              4001116 30000 4
                                                             galvanized                                                      M4                                                     loose              4001116 30001 1
                                                             galvanized                                                      M5                                                     loose              4001116 30002 8
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             galvanized                                                      M6                                                     loose              4001116 30003 5
                                                             galvanized                                                      M7                                                     loose              4001116 30707 2
                                                             galvanized                                                      M8                                                     loose              4001116 30004 2 4001116 30014 1
                                                             galvanized                                                     M 10                                                    loose              4001116 30005 9 4001116 30015 8
                                                             galvanized                                                     M 12                                                    loose              4001116 30006 6 4001116 30016 5
                                                             galvanized                                                     M 14                                                    loose              4001116 30007 3
                                                             galvanized                                                     M 16                                                    loose              4001116 30008 0 4001116 30018 9
                                                             galvanized                                                     M 18                                                    loose              4001116 30718 8
                                                             galvanized                                                     M 20                                                    loose              4001116 30009 7 4001116 30019 6


                                                            Metric threaded rod




                                                            Min. OU = 5 pcs.


                                                             Colour                                                                          Dim.                                                    Packaging                  EAN / Item no.
                                                             Stainless steel V2A                                                                                                                                                length: 1.00 m
                                                             stainless steel V2A                                                             M3                                                          loose                4001116 30020 2
                                                             stainless steel V2A                                                             M4                                                          loose                4001116 30021 9
                                                             stainless steel V2A                                                             M5                                                          loose                4001116 30022 6
                                                             stainless steel V2A                                                             M6                                                          loose                4001116 30023 3
                                                             stainless steel V2A                                                             M8                                                          loose                4001116 30024 0
                                                             stainless steel V2A                                                             M 10                                                        loose                4001116 30025 7
                                                             stainless steel V2A                                                             M 12                                                        loose                4001116 30026 4
                                                             stainless steel V2A                                                             M 16                                                        loose                4001116 30028 8
                                                             stainless steel V2A                                                             M 20                                                        loose                4001116 30029 5




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.33
  alfer
                              ®




combitech system · Basis
                                       ®




Metric threaded rods

Metric threaded rod




Min. OU = 5 pcs.


 Colour                                                                  Dim.                                                            Packaging                  EAN / Item no.
 Solid brass                                                                                                                                                        length: 1.00 m
 brass                                                                    M3                                                                 loose                4001116 30030 1
 brass                                                                    M4                                                                 loose                4001116 30031 8
 brass                                                                    M5                                                                 loose                4001116 30032 5




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 brass                                                                    M6                                                                 loose                4001116 30033 2
 brass                                                                    M8                                                                 loose                4001116 30034 9
 brass                                                                   M 10                                                                loose                4001116 30035 6
 brass                                                                   M 12                                                                loose                4001116 30036 3


Metric threaded rod




Min. OU = 5 pcs.


 Colour                                                                Dim.                                                            Packaging                    EAN / Item no.
 Plastic (PA)                                                                                                                                                       length: 1.00 m
 white                                                                   M5                                                                   loose               4001116 30042 4
 white                                                                   M6                                                                   loose               4001116 30043 1
 white                                                                   M8                                                                   loose               4001116 30044 8


Metric threaded pipe




Min. OU = 5 pcs.


 Colour                                                                          Dim.                                                  Packaging                    EAN / Item no.
 Galvanized steel                                                                                                                                                   length: 1.00 m
 galvanized                                                           M 10 × 1.0 mm                                                           loose               4001116 34801 3


     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.34
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Gusset




                                                            Min. OU = 5 pcs.


                                                             Colour                                                              Dim. a                                                              Packaging                  EAN / Item no.
                                                             Uncoated aluminium
                                                             uncoated                                                          60.0 mm                                                          SS bag cont. 4 pcs.           4001116 29796 0
                                                             uncoated                                                        110.0 mm                                                           SS bag cont. 2 pcs.           4001116 29797 7
                                                             uncoated                                                        160.0 mm                                                           SS bag cont. 1 pc.            4001116 29798 4
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Step drill
                                                            The step drill has seven drill steps, which means seven hole diameters in
                                                            one. Its shaft fits into a size 10 drill chuck. The drill holes match the
                                                                           ®

                                                            combitech sizes plus 0.2 mm tolerance. Even large holes can be easily
                                                            drilled without drill rigs using the step drill.




                                                            Min. OU = 5 pcs.


                                                             For hole dimensions                                                                                                                     Packaging                  EAN / Item no.
                                                             Steel/HSS
                                                             4.8 / 7.7 / 11.7 / 15.7 / 19.7 / 23.7 / 29.7 mm                                                                                          clap-pac                4001116 29799 1


                                                            Polish Alu-Magic
                                                            If the shine on the aluminium should fade, you can get help. Treated with the
                                                            high shine polish Alu-Magic, uncoated aluminium is given a brilliant chrome
                                                            effect. Also suitable for copper, stainless steel, brass, etc. Lasting protection
                                                            against oxidation.




                                                            Min. OU = 5 pcs.


                                                             Contents                                                                                                                                Packaging                  EAN / Item no.


                                                             100 ml                                                                                                                                    SS bag                 4001116 30687 7




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.35
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Universal deburrer
With the universal deburrer you can safely and easily deburr the sharp edges
from saw cuts. If you deburr the inside edges of square tubes, you can in-
sert the connect connectors more easily. Deburred edges prevent injuries.




Min. OU = 5 pcs.


 Colour                                                                                                                                  Packaging                  EAN / Item no.


 blue                                                                                                                               SS bag cont. 1 pc.            4001116 28661 2


End cap, round




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 Colour                                                           Dim. a                                                                 Packaging                  EAN / Item no.
 Plastic (hard PVC)
 black                                                          11.5 mm                                                             SS bag cont. 4 pcs.           4001116 29804 2
 black                                                          15.5 mm                                                             SS bag cont. 2 pcs.           4001116 29806 6
 black                                                          19.5 mm                                                             SS bag cont. 2 pcs.           4001116 29808 0
 black                                                          23.5 mm                                                             SS bag cont. 2 pcs.           4001116 29810 3
 black                                                          29.5 mm                                                             SS bag cont. 2 pcs.           4001116 29812 7
 black                                                          35.5 mm                                                             SS bag cont. 2 pcs.           4001116 29814 1


End cap, rectangular




Min. OU = 5 pcs.


 Colour                                     Dim. a                                      Dim. b                                           Packaging                  EAN / Item no.
 Plastic (hard PVC)
 black                                     19.5 mm                                    35.5 mm                                       SS bag cont. 2 pcs.           4001116 29848 6




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.36
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            End cap, square




                                                            Min. OU = 5 pcs.


                                                             Colour                                                           Dim. a                                                                 Packaging                  EAN / Item no.
                                                             Plastic (hard PVC)
                                                             black                                                          11.5 mm                                                             SS bag cont. 4 pcs.           4001116 29824 0
                                                             black                                                          15.5 mm                                                             SS bag cont. 2 pcs.           4001116 29826 4
                                                             black                                                          19.5 mm                                                             SS bag cont. 2 pcs.           4001116 29828 8
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             black                                                          23.5 mm                                                             SS bag cont. 2 pcs.           4001116 29830 1
                                                             black                                                          29.5 mm                                                             SS bag cont. 2 pcs.           4001116 29832 5
                                                             black                                                          35.5 mm                                                             SS bag cont. 2 pcs.           4001116 29834 9


                                                            Threaded plug
                                                            The plastic threaded plug fits into a 23.5 mm square tube. An M 10 screw or
                                                            threaded rod fits into the thread. This means that you can, for example, join
                                                            2 square tubes together or attach another unit to a 23.5 mm square tube
                                                            face on.




                                                            Min. OU = 5 pcs.


                                                             Colour                                          Dim. a                                        Dim. d                                    Packaging                  EAN / Item no.
                                                             Plastic (PA)
                                                             black                                         23.5 mm                                            M 10                                       loose                4001116 30383 8


                                                            Furniture roller
                                                            The furniture rollers have an M 10 thread and therefore fit into the threaded
                                                            plugs. You can therefore make trolleys, plant trolleys, rolling shelves, and
                                                            much more besides. There are soft furniture rollers for hard floors such as
                                                            parquet and laminate and hard furniture rollers for soft floors such as carpet.
                                                            The furniture rollers have a loading capacity of 50 kg.




                                                            Min. OU = 5 pcs.


                                                             Colour                               Dim. a                            Dim. d                                type                       Packaging                  EAN / Item no.
                                                             Steel/PVC
                                                             black                              40.0 mm                                M 10                               hard                           loose                4001116 30385 2
                                                             black                              40.0 mm                                M 10                               soft                           loose                4001116 30386 9




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.37
  alfer
                                ®




combitech system · Basis
                                       ®




System accessories

Adjustable foot
With the plastic adjustable foot you can compensate uneven places on the
floor safely and easily. This is often necessary when building a table or shelv-
ing unit. The adjustable foot fits into the 23.5 mm square tube.




Min. OU = 5 pcs.


 Colour                                                           Dim. a                                                                 Packaging                  EAN / Item no.
 Plastic (hard PVC)
 black                                                          23.5 mm                                                             SS bag cont. 2 pcs.           4001116 30384 5


Shelf unit foot




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
                                           ®

For all even-branched combitech system profile brackets with dimension
a = 23.5 mm or 35.5 mm




Min. OU = 5 pcs.


 Colour                                                           Dim. a                                                                 Packaging                  EAN / Item no.
 Plastic (hard PVC)
 black                                                          23.5 mm                                                             SS bag cont. 2 pcs.           4001116 39490 4
 black                                                          35.5 mm                                                             SS bag cont. 2 pcs.           4001116 39491 1


Rubber cap




Min. OU = 5 pcs.


 Colour                   for                     Dim. a                      Dim. b                     Dim. c                          Packaging                  EAN / Item no.
 Plastic (soft PVC)
 black                    M5                      4.5 mm                    10.0 mm                      1.2 mm                     SS bag cont. 6 pcs.           4001116 30052 3
 black                    M6                      5.5 mm                    10.0 mm                      1.2 mm                     SS bag cont. 6 pcs.           4001116 30053 0
 black                    M8                      7.5 mm                    15.0 mm                      1.2 mm                     SS bag cont. 4 pcs.           4001116 30054 7
 black                   M 10                     9.5 mm                    20.0 mm                      1.2 mm                     SS bag cont. 4 pcs.           4001116 30055 4
 black                   M 12                   11.5 mm                     20.0 mm                      1.2 mm                     SS bag cont. 2 pcs.           4001116 30056 1
 black                   M 16                   15.5 mm                     30.0 mm                      1.2 mm                     SS bag cont. 2 pcs.           4001116 30058 5
 black                   M 20                   19.5 mm                     30.0 mm                      1.2 mm                     SS bag cont. 2 pcs.           4001116 30059 2



     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.38
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Hexagon cap




                                                            Min. OU = 5 pcs.


                                                             Colour                                        for                           Wrench size                                                 Packaging                  EAN / Item no.
                                                             Plastic (PE)
                                                             black                                        M5                                           8                                        SS bag cont. 6 pcs.           4001116 30122 3
                                                             black                                        M6                                          10                                        SS bag cont. 6 pcs.           4001116 30123 0
                                                             black                                        M8                                          13                                        SS bag cont. 4 pcs.           4001116 30124 7
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             black                                        M 10                                        17                                        SS bag cont. 4 pcs.           4001116 30125 4
                                                             black                                        M 12                                        19                                        SS bag cont. 2 pcs.           4001116 30126 1
                                                             black                                        M 16                                        24                                        SS bag cont. 2 pcs.           4001116 30128 5
                                                             black                                        M 20                                        30                                        SS bag cont. 1 pc.            4001116 30129 2


                                                            Compression spring, standard design




                                                            Min. OU = 5 pcs.


                                                             Dim.             Dim. d              Dim. Da                Dim. Di               Dim. Lo               Spring rate                     Packaging                  EAN / Item no.
                                                             Standard version in steel
                                                             M5               0.7 mm                7.5 mm               6.1 mm                35.8 mm               0.819 N/mm                 SS bag cont. 2 pcs.           4001116 29862 2
                                                             M8               0.8 mm              10.8 mm                9.2 mm                66.0 mm               0.334 N/mm                 SS bag cont. 2 pcs.           4001116 29864 6
                                                             M 12             0.9 mm              15.0 mm               13.2 mm                59.7 mm               0.434 N/mm                 SS bag cont. 2 pcs.           4001116 29866 0
                                                             M 16           1.25 mm               19.0 mm               16.5 mm                75.0 mm               0.523 N/mm                 SS bag cont. 1 pc.            4001116 29868 4
                                                             M 20             1.6 mm              23.6 mm               20.4 mm                27.5 mm               1.254 N/mm                 SS bag cont. 1 pc.            4001116 29870 7
                                                             M 24             1.6 mm              28.0 mm               24.8 mm                85.0 mm               0.660 N/mm                 SS bag cont. 1 pc.            4001116 29872 1
                                                             M 30             1.5 mm              34.0 mm               31.0 mm              107.0 mm                0.273 N/mm                 SS bag cont. 1 pc.            4001116 29874 5
                                                             More powerful version in steel
                                                             M5               1.0 mm                7.3 mm               5.3 mm                30.5 mm               3.259 N/mm                 SS bag cont. 2 pcs.           4001116 29882 0
                                                             M8               1.0 mm              11.0 mm                9.0 mm                67.0 mm               0.657 N/mm                 SS bag cont. 2 pcs.           4001116 29884 4
                                                             M 12             1.4 mm              15.0 mm               12.2 mm                65.3 mm               1.638 N/mm                 SS bag cont. 2 pcs.           4001116 29886 8
                                                             M 16             1.6 mm              19.8 mm               16.6 mm              104.0 mm                0.820 N/mm                 SS bag cont. 1 pc.            4001116 29888 2
                                                             M 20             1.4 mm              24.0 mm               21.2 mm                93.0 mm               0.616 N/mm                 SS bag cont. 1 pc.            4001116 29890 5
                                                             M 24             2.8 mm              30.0 mm               24.4 mm                70.7 mm               5.658 N/mm                 SS bag cont. 1 pc.            4001116 29892 9
                                                             M 30             2.0 mm              34.0 mm               30.0 mm              120.0 mm                0.904 N/mm                 SS bag cont. 1 pc.            4001116 29894 3




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.39
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Tension spring, standard design




Min. OU = 5 pcs.


 Dim.             Dim. d              Dim. Da                Dim. Di               Dim. Lo               Spring rate                     Packaging                  EAN / Item no.
 Standard version in steel
 M5             0.45 mm                 5.0 mm               4.1 mm                18.3 mm               0.181 N/mm                 SS bag cont. 2 pcs.           4001116 29902 5
 M8               0.5 mm                8.0 mm               7.0 mm                33.2 mm               0.036 N/mm                 SS bag cont. 2 pcs.           4001116 29904 9
 M 12             0.8 mm              10.8 mm                9.2 mm                35.5 mm               0.170 N/mm                 SS bag cont. 2 pcs.           4001116 29906 3




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 M 16             1.0 mm              13.5 mm               11.5 mm                59.4 mm               0.132 N/mm                 SS bag cont. 1 pc.            4001116 29908 7
 M 20           1.25 mm               17.2 mm               14.7 mm                70.8 mm               0.168 N/mm                 SS bag cont. 1 pc.            4001116 29910 0
 M 24             1.6 mm              21.6 mm               18.4 mm                85.0 mm               0.249 N/mm                 SS bag cont. 1 pc.            4001116 29912 4
 M 30             2.0 mm              27.0 mm               23.0 mm              118.0 mm                0.264 N/mm                 SS bag cont. 1 pc.            4001116 29914 8
 More powerful version in steel
 M5               0.8 mm                4.8 mm               3.2 mm                15.5 mm               5.670 N/mm                 SS bag cont. 2 pcs.           4001116 29922 3
 M8               0.8 mm                8.0 mm               6.4 mm                26.5 mm               0.604 N/mm                 SS bag cont. 2 pcs.           4001116 29924 7
 M 12             1.0 mm              11.0 mm                9.0 mm                40.4 mm               0.416 N/mm                 SS bag cont. 2 pcs.           4001116 29926 1
 M 16             1.4 mm              15.0 mm               12.2 mm                55.9 mm               0.635 N/mm                 SS bag cont. 1 pc.            4001116 29928 5
 M 20             1.6 mm              17.6 mm               14.4 mm                64.6 mm               0.665 N/mm                 SS bag cont. 1 pc.            4001116 29930 8
 M 24             2.2 mm              24.0 mm               19.6 mm                88.6 mm               0.940 N/mm                 SS bag cont. 1 pc.            4001116 29932 2
 M 30             2.5 mm              27.5 mm               22.5 mm              101.0 mm                1.040 N/mm                 SS bag cont. 1 pc.            4001116 29934 6


Countersunk screw set




Min. OU = 5 pcs.


 Screw size                                                                                                                         Packaging                       EAN / Item no.
 Steel
 M 2 × 4.0 mm                                                                                                              SS bag cont. 20 pcs. each              4001116 28684 1
 M 2 × 6.0 mm                                                                                                              SS bag cont. 20 pcs. each              4001116 28683 4
 M 2 × 8.0 mm                                                                                                              SS bag cont. 20 pcs. each              4001116 28685 8




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.40
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Hexagon nut, DIN 934




                                                            Min. OU = 5 pcs.


                                                             Dim. d                                      Dim. b                                Wrench size                                           Packaging                  EAN / Item no.
                                                             Galvanized steel
                                                             M3                                         2.4 mm                                       5.5                                       SS bag cont. 10 pcs.           4001116 30060 8
                                                             M4                                         3.2 mm                                        7                                        SS bag cont. 10 pcs.           4001116 30061 5
                                                             M5                                         4.0 mm                                        8                                         SS bag cont. 6 pcs.           4001116 30062 2
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             M6                                         5.0 mm                                        10                                        SS bag cont. 6 pcs.           4001116 30063 9
                                                             M8                                         6.5 mm                                        13                                        SS bag cont. 4 pcs.           4001116 30064 6
                                                             M 10                                       8.0 mm                                        17                                        SS bag cont. 4 pcs.           4001116 30065 3
                                                             M 12                                      10.0 mm                                        19                                        SS bag cont. 2 pcs.           4001116 30066 0
                                                             M 14                                      11.0 mm                                        22                                        SS bag cont. 2 pcs.           4001116 30067 7
                                                             M 16                                      13.0 mm                                        24                                        SS bag cont. 2 pcs.           4001116 30068 4
                                                             M 20                                      16.0 mm                                        30                                        SS bag cont. 1 pc.            4001116 30069 1


                                                            Hexagon nut, DIN 934




                                                            Min. OU = 5 pcs.


                                                             Dim. d                                      Dim. b                                Wrench size                                           Packaging                  EAN / Item no.
                                                             Stainless steel V2A
                                                             M3                                         2.4 mm                                       5.5                                       SS bag cont. 10 pcs.           4001116 30070 7
                                                             M4                                         3.2 mm                                        7                                        SS bag cont. 10 pcs.           4001116 30071 4
                                                             M5                                         4.0 mm                                        8                                         SS bag cont. 6 pcs.           4001116 30072 1
                                                             M6                                         5.0 mm                                        10                                        SS bag cont. 6 pcs.           4001116 30073 8
                                                             M8                                         6.5 mm                                        13                                        SS bag cont. 4 pcs.           4001116 30074 5
                                                             M 10                                       8.0 mm                                        17                                        SS bag cont. 4 pcs.           4001116 30075 2
                                                             M 12                                      10.0 mm                                        19                                        SS bag cont. 2 pcs.           4001116 30076 9
                                                             M 16                                      13.0 mm                                        24                                        SS bag cont. 2 pcs.           4001116 30078 3
                                                             M 20                                      16.0 mm                                        30                                        SS bag cont. 1 pc.            4001116 30079 0




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.41
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Hexagon nut, DIN 934




Min. OU = 5 pcs.


 Dim. d                                      Dim. b                                Wrench size                                           Packaging                  EAN / Item no.
 Solid brass
 M3                                         2.4 mm                                       5.5                                       SS bag cont. 10 pcs.           4001116 30080 6
 M4                                         3.2 mm                                        7                                        SS bag cont. 10 pcs.           4001116 30081 3
 M5                                         4.0 mm                                        8                                         SS bag cont. 6 pcs.           4001116 30082 0




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 M6                                         5.0 mm                                        10                                        SS bag cont. 6 pcs.           4001116 30083 7
 M8                                         6.5 mm                                        13                                        SS bag cont. 4 pcs.           4001116 30084 4
 M 10                                       8.0 mm                                        17                                        SS bag cont. 4 pcs.           4001116 30085 1
 M 12                                      10.0 mm                                        19                                        SS bag cont. 2 pcs.           4001116 30086 8


Hexagon nut, DIN 934




Min. OU = 5 pcs.


 Dim. d                                      Dim. b                                Wrench size                                           Packaging                  EAN / Item no.
 Plastic (PA)
 M5                                         4.0 mm                                        8                                         SS bag cont. 6 pcs.           4001116 30092 9
 M6                                         5.0 mm                                        10                                        SS bag cont. 6 pcs.           4001116 30093 6
 M8                                         6.5 mm                                        13                                        SS bag cont. 4 pcs.           4001116 30094 3




                       User tips
                       Nuts are available in the most common sizes in the range. There are also self-tapping nuts depending on the size with or without
                       cap. Also numerous special nuts, such as rectangular, wing, ring, and knurled nuts, etc.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.42
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Hexagon nut, self-locking, DIN 985




                                                            Min. OU = 5 pcs.


                                                             Dim. d                                      Dim. b                                Wrench size                                           Packaging                  EAN / Item no.
                                                             Galvanized steel
                                                             M3                                         4.0 mm                                       5.5                                       SS bag cont. 10 pcs.           4001116 30100 1
                                                             M4                                         5.0 mm                                        7                                        SS bag cont. 10 pcs.           4001116 30101 8
                                                             M5                                         5.0 mm                                        8                                         SS bag cont. 6 pcs.           4001116 30102 5
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             M6                                         6.0 mm                                        10                                        SS bag cont. 6 pcs.           4001116 30103 2
                                                             M8                                         8.0 mm                                        13                                        SS bag cont. 4 pcs.           4001116 30104 9
                                                             M 10                                      10.0 mm                                        17                                        SS bag cont. 4 pcs.           4001116 30105 6
                                                             M 12                                      12.0 mm                                        19                                        SS bag cont. 2 pcs.           4001116 30106 3
                                                             M 16                                      16.0 mm                                        24                                        SS bag cont. 2 pcs.           4001116 30108 7
                                                             M 20                                      20.0 mm                                        30                                        SS bag cont. 1 pc.            4001116 30109 4


                                                            Hexagon cap nus, self-locking, DIN 986




                                                            Min. OU = 5 pcs.


                                                             Dim. d                          Dim. h                               Dim. t                    Wrench size                              Packaging                  EAN / Item no.
                                                             Galvanized steel
                                                             M5                            10.0 mm                               7.5 mm                            8                            SS bag cont. 6 pcs.           4001116 30112 4
                                                             M6                            12.0 mm                               8.0 mm                           10                            SS bag cont. 6 pcs.           4001116 30113 1
                                                             M8                            15.0 mm                             11.0 mm                            13                            SS bag cont. 4 pcs.           4001116 30114 8
                                                             M 10                          18.0 mm                             13.0 mm                            17                            SS bag cont. 4 pcs.           4001116 30115 5
                                                             M 12                          22.0 mm                             16.0 mm                            19                            SS bag cont. 2 pcs.           4001116 30116 2




                                                                                   User tips
                                                                                   Nuts are available in the most common sizes in the range. There are also self-tapping nuts depending on the size with or without
                                                                                   cap. Also numerous special nuts, such as rectangular, wing, ring, and knurled nuts, etc.




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.43
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Square nut, self-locking; DIN 557




Min. OU = 5 pcs.


 Dim. d                                      Dim. b                        Wrench size                                                   Packaging                  EAN / Item no.
 Galvanized steel
 M5                                          4.0 mm                                       8                                         SS bag cont. 6 pcs.           4001116 30132 2
 M6                                          5.0 mm                                     10                                          SS bag cont. 6 pcs.           4001116 30133 9
 M8                                          6.5 mm                                     13                                          SS bag cont. 4 pcs.           4001116 30134 6




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 M 10                                        8.0 mm                                     17                                          SS bag cont. 4 pcs.           4001116 30135 3
 M 12                                       10.0 mm                                     19                                          SS bag cont. 2 pcs.           4001116 30136 0


Wing nut, american shape




Min. OU = 5 pcs.


 Dim. d                                     Dim. b                                      Dim. h                                           Packaging                  EAN / Item no.
 Galvanized steel
 M5                                        25.0 mm                                    12.0 mm                                       SS bag cont. 6 pcs.           4001116 30142 1
 M6                                        32.0 mm                                    16.0 mm                                       SS bag cont. 6 pcs.           4001116 30143 8
 M8                                        38.0 mm                                    20.0 mm                                       SS bag cont. 4 pcs.           4001116 30144 5
 M 10                                      50.0 mm                                    25.0 mm                                       SS bag cont. 4 pcs.           4001116 30145 2
 M 12                                      64.0 mm                                    32.0 mm                                       SS bag cont. 2 pcs.           4001116 30146 9




                       User tips
                       Nuts are available in the most common sizes in the range. There are also self-tapping nuts depending on the size with or without
                       cap. Also numerous special nuts, such as rectangular, wing, ring, and knurled nuts, etc.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.44
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Lifting eye nut, DIN 582




                                                            Min. OU = 5 pcs.


                                                             Dim. d           Dim. d1                Dim. d2              Dim. d3                 Dim. h                  Load                       Packaging                  EAN / Item no.
                                                             Galvanized steel
                                                             M8               36.0 mm               20.0 mm               20.0 mm               36.0 mm               max. 140 kg               SS bag cont. 1 pc.            4001116 30154 4
                                                             M 12             54.0 mm               30.0 mm               30.0 mm               53.0 mm               max. 340 kg               SS bag cont. 1 pc.            4001116 30156 8


                                                            Knurled nut, black, with thread
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 5 pcs.


                                                             Dim. d                Dim. d1                    Dim. d2                      Dim. h                     Dim. k                         Packaging                  EAN / Item no.
                                                             Plastic (hard PVC)
                                                             M5                   15.0 mm                    10.0 mm                     10.5 mm                     5.7 mm                     SS bag cont. 4 pcs.           4001116 30162 9
                                                             M8                   25.5 mm                    16.0 mm                     18.0 mm                     9.7 mm                     SS bag cont. 1 pc.            4001116 30164 3


                                                            Anchor nut, DIN 7965




                                                            Min. OU = 5 pcs.


                                                             Dim. d                                    Dim. d1                                      Dim. h                                           Packaging                  EAN / Item no.
                                                             Steel
                                                             M5                                        10.0 mm                                    12.0 mm                                       SS bag cont. 4 pcs.           4001116 30172 8
                                                             M6                                        12.0 mm                                    15.0 mm                                       SS bag cont. 4 pcs.           4001116 30173 5
                                                             M8                                        16.0 mm                                    18.0 mm                                       SS bag cont. 2 pcs.           4001116 30174 2
                                                             M 10                                      18.5 mm                                    20.0 mm                                       SS bag cont. 2 pcs.           4001116 30175 9
                                                             M 12                                      22.0 mm                                    30.0 mm                                       SS bag cont. 1 pc.            4001116 30176 6




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.45
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Hand wheel, black, with thread




Min. OU = 5 pcs.


 Dim. d                Dim. d1                    Dim. d2                      Dim. h                       Dim. k                       Packaging                  EAN / Item no.
 Plastic (hard PVC)
 M8                   62.0 mm                    20.0 mm                     40.0 mm                     17.0 mm                    SS bag cont. 1 pc.            4001116 30224 4


Hexagon connection sleeve




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 Dim. d                                      Dim. h                                 Wrench size                                          Packaging                  EAN / Item no.
 Galvanized steel
 M5                                        30.0 mm                                          8                                       SS bag cont. 4 pcs.           4001116 30182 7
 M6                                        30.0 mm                                         10                                       SS bag cont. 4 pcs.           4001116 30183 4
 M8                                        30.0 mm                                         13                                       SS bag cont. 2 pcs.           4001116 30184 1
 M 10                                      30.0 mm                                         17                                       SS bag cont. 2 pcs.           4001116 30185 8
 M 12                                      30.0 mm                                         19                                       SS bag cont. 1 pc.            4001116 30186 5


Hinged plate, black, with thread




Min. OU = 5 pcs.


 Dim. d                        Dim. d1                               Dim. h                      Wrench size                             Packaging                  EAN / Item no.
 Galvanized steel
 M8                            30.0 mm                             30.0 mm                             14                           SS bag cont. 1 pc.            4001116 30204 6




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.46
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Rubber buffer, black, with thread




                                                            Min. OU = 5 pcs.


                                                             Dim. d                       Dim. d1                             Dim. t                           Dim. h                                Packaging                  EAN / Item no.
                                                             Steel/rubber
                                                             M8                          30.0 mm                            8.5 mm                           20.0 mm                            SS bag cont. 1 pc.            4001116 30364 7


                                                            Rubber buffer, black, with double-sided thread
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 5 pcs.


                                                             Dim. d                       Dim. d1                             Dim. t                           Dim. h                                Packaging                  EAN / Item no.
                                                             Steel/rubber
                                                             M8                          30.0 mm                            8.5 mm                           20.0 mm                            SS bag cont. 1 pc.            4001116 30374 6


                                                            Adjusting foot, black, with thread




                                                            Min. OU = 5 pcs.


                                                             Dim. d                           Dim. t                             Dim. h                      Wrench size                             Packaging                  EAN / Item no.
                                                             Steel/rubber
                                                             M8                            46.0 mm                             54.0 mm                             30                           SS bag cont. 1 pc.            4001116 30354 8




                                                                                   User tips
                                                                                                                                                                                 ®

                                                                                   For example, if you are building a base frame for a mitre saw out of combitech profiles, you have rubber buffers in the range, which
                                                                                   you use as feet and thus reduce vibration.




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.47
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Eye bolt, DIN 444




Min. OU = 5 pcs.


 Dim. d              Dim. d1                     Dim. d2                      Dim. t                      Dim. h                         Packaging                  EAN / Item no.
 Galvanized steel
 M5                   5.0 mm                    11.3 mm                     16.0 mm                     36.0 mm                     SS bag cont. 4 pcs.           4001116 30342 5
 M8                   8.0 mm                    20.0 mm                     25.0 mm                     48.7 mm                     SS bag cont. 2 pcs.           4001116 30344 9


Turnbuckle with hook and eye, DIN 1480




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 Dim. d                                                           Dim. h                                                                 Packaging                  EAN / Item no.
 Galvanized steel
 M5                                                             50.0 mm                                                             SS bag cont. 1 pc.            4001116 30192 6
 M8                                                            110.0 mm                                                                      loose                4001116 30194 0


Adjusting ring, DIN 705




Min. OU = 5 pcs.


 for thread             Dim. d                     Dim. d1                 Dim. d2                      Dim. b                           Packaging                  EAN / Item no.
 Galvanized steel
 M5                     5.0 mm                     10.0 mm                      M3                      6.0 mm                      SS bag cont. 6 pcs.           4001116 30332 6
 M6                     6.0 mm                     12.0 mm                      M4                      8.0 mm                      SS bag cont. 6 pcs.           4001116 30333 3
 M8                     8.0 mm                     16.0 mm                      M4                      8.0 mm                      SS bag cont. 4 pcs.           4001116 30334 0
 M 10                 10.0 mm                      20.0 mm                      M5                    10.0 mm                       SS bag cont. 4 pcs.           4001116 30335 7
 M 12                 12.0 mm                      22.0 mm                      M6                    12.0 mm                       SS bag cont. 1 pc.            4001116 30336 4




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.48
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Set: Hexagon nut, DIN 934, with washer, DIN 9021




                                                            Min. OU = 5 pcs.


                                                             Dim. d1            Dim. m         Wrench size             Dim. d               Dim. d2               Dim. h                        Packaging                       EAN / Item no.
                                                             Galvanized steel
                                                             M3                 2.4 mm                 5.5            3.2 mm                 9.0 mm               0.8 mm               SS bag cont. 20 pcs. each              4001116 30770 6
                                                             M4                 3.2 mm                 7              4.3 mm               12.0 mm                1.0 mm               SS bag cont. 20 pcs. each              4001116 30771 3
                                                             M5                 4.0 mm                 8              5.3 mm               15.0 mm                1.2 mm               SS bag cont. 10 pcs. each              4001116 30772 0
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             M6                 5.0 mm                 10             6.4 mm               18.0 mm                1.6 mm               SS bag cont. 10 pcs. each              4001116 30773 7
                                                             M8                 6.5 mm                 13             8.4 mm               24.0 mm                2.0 mm               SS bag cont. 6 pcs. each               4001116 30774 4
                                                             M 10               8.0 mm                 17            10.5 mm               30.0 mm                2.5 mm               SS bag cont. 2 pcs. each               4001116 30775 1
                                                             M 12              10.0 mm                 19            13.0 mm               37.0 mm                3.0 mm               SS bag cont. 2 pcs. each               4001116 30776 8
                                                             M 14              11.0 mm                 22            15.0 mm               44.0 mm                3.0 mm               SS bag cont. 2 pcs. each               4001116 30777 5
                                                             M 16              13.0 mm                 24            17.0 mm               50.0 mm                3.0 mm               SS bag cont. 2 pcs. each               4001116 30778 2
                                                             M 20              16.0 mm                 30            22.0 mm               60.0 mm                4.0 mm               SS bag cont. 2 pcs. each               4001116 30779 9


                                                            Set: Hexagon nut, DIN 934, with washer, DIN 9021




                                                            Min. OU = 5 pcs.


                                                             Dim. d1            Dim. m         Wrench size             Dim. d               Dim. d2               Dim. h                        Packaging                       EAN / Item no.
                                                             Solid brass
                                                             M3                 2.4 mm                 5.5            3.2 mm                 9.0 mm               0.8 mm               SS bag cont. 20 pcs. each              4001116 30780 5
                                                             M4                 3.2 mm                 7              4.3 mm               12.0 mm                1.0 mm               SS bag cont. 20 pcs. each              4001116 30781 2
                                                             M5                 4.0 mm                 8              5.3 mm               15.0 mm                1.2 mm               SS bag cont. 10 pcs. each              4001116 30782 9
                                                             M6                 5.0 mm                 10             6.4 mm               18.0 mm                1.2 mm               SS bag cont. 10 pcs. each              4001116 30783 6
                                                             M8                 6.5 mm                 13             8.4 mm               24.0 mm                2.0 mm               SS bag cont. 6 pcs. each               4001116 30784 3
                                                             M 10               8.0 mm                 17            10.5 mm               30.0 mm                2.5 mm               SS bag cont. 2 pcs. each               4001116 30785 0
                                                             M 12              10.0 mm                 19            13.0 mm               37.0 mm                3.0 mm               SS bag cont. 2 pcs. each               4001116 30786 7




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.49
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Set: Hexagon nut, DIN 934, with washer, DIN 9021




Min. OU = 5 pcs.


 Dim. d1            Dim. m         Wrench size             Dim. d               Dim. d2               Dim. h                        Packaging                       EAN / Item no.
 Stainless steel
 M3                 2.4 mm                 5.5            3.2 mm                 9.0 mm               0.8 mm               SS bag cont. 20 pcs. each              4001116 30790 4
 M4                 3.2 mm                 7              4.3 mm               12.0 mm                1.0 mm               SS bag cont. 20 pcs. each              4001116 30791 1
 M5                 4.0 mm                 8              5.3 mm               15.0 mm                1.2 mm               SS bag cont. 10 pcs. each              4001116 30792 8




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 M6                 5.0 mm                 10             6.4 mm               18.0 mm                1.6 mm               SS bag cont. 10 pcs. each              4001116 30793 5
 M8                 6.5 mm                 13             8.4 mm               24.0 mm                2.0 mm               SS bag cont. 6 pcs. each               4001116 30794 2
 M 10               8.0 mm                 17            10.5 mm               30.0 mm                2.5 mm               SS bag cont. 2 pcs. each               4001116 30795 9
 M 12              10.0 mm                 19            13.0 mm               37.0 mm                3.0 mm               SS bag cont. 2 pcs. each               4001116 30796 6


Washer, DIN 9021




Min. OU = 5 pcs.


 for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
 Galvanized steel
 M3                            3.2 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30230 5
 M4                            4.3 mm                          12.0 mm                           1.0 mm                            SS bag cont. 10 pcs.           4001116 30231 2
 M5                            5.3 mm                          15.0 mm                           1.2 mm                             SS bag cont. 6 pcs.           4001116 30232 9
 M6                            6.4 mm                          18.0 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30233 6
 M8                            8.4 mm                          24.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30234 3
 M 10                         10.5 mm                          30.0 mm                           2.5 mm                             SS bag cont. 4 pcs.           4001116 30235 0
 M 12                         13.0 mm                          37.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30236 7
 M 14                         15.0 mm                          44.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30237 4
 M 16                         17.0 mm                          50.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30238 1
 M 20                         22.0 mm                          60.0 mm                           4.0 mm                             SS bag cont. 1 pc.            4001116 30239 8




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.50
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Washer, DIN 9021




                                                            Min. OU = 5 pcs.


                                                             for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
                                                             Stainless steel V2A
                                                             M3                            3.2 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30240 4
                                                             M4                            4.3 mm                          12.0 mm                           1.0 mm                            SS bag cont. 10 pcs.           4001116 30241 1
                                                             M5                            5.3 mm                          15.0 mm                           1.2 mm                             SS bag cont. 6 pcs.           4001116 30242 8
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             M6                            6.4 mm                          18.0 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30243 5
                                                             M8                            8.4 mm                          24.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30244 2
                                                             M 10                         10.5 mm                          30.0 mm                           2.5 mm                             SS bag cont. 4 pcs.           4001116 30245 9
                                                             M 12                         13.0 mm                          37.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30246 6
                                                             M 16                         17.0 mm                          50.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30248 0
                                                             M 20                         22.0 mm                          60.0 mm                           4.0 mm                             SS bag cont. 1 pc.            4001116 30249 7


                                                            Washer, DIN 9021




                                                            Min. OU = 5 pcs.


                                                             for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
                                                             Solid brass
                                                             M3                            3.2 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30250 3
                                                             M4                            4.3 mm                          12.0 mm                           1.0 mm                            SS bag cont. 10 pcs.           4001116 30251 0
                                                             M5                            5.3 mm                          15.0 mm                           1.2 mm                             SS bag cont. 6 pcs.           4001116 30252 7
                                                             M6                            6.4 mm                          18.0 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30253 4
                                                             M8                            8.4 mm                          24.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30254 1
                                                             M 10                         10.5 mm                          30.0 mm                           2.5 mm                             SS bag cont. 4 pcs.           4001116 30255 8
                                                             M 12                         13.0 mm                          37.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30256 5




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.51
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Washes, DIN 9021




Min. OU = 5 pcs.


 for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
 Plastic (PA)
 M3                            3.2 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30260 2
 M4                            4.3 mm                          12.0 mm                           1.0 mm                            SS bag cont. 10 pcs.           4001116 30261 9
 M5                            5.3 mm                          15.0 mm                           1.2 mm                             SS bag cont. 6 pcs.           4001116 30262 6




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 M6                            6.4 mm                          18.0 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30263 3
 M8                            8.4 mm                          24.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30264 0
 M 10                         10.5 mm                          30.0 mm                           2.5 mm                             SS bag cont. 4 pcs.           4001116 30265 7
 M 12                         13.0 mm                          37.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30266 4


Washer, DIN 125




Min. OU = 5 pcs.


 for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
 Galvanized steel
 M3                            3.2 mm                            7.0 mm                          0.5 mm                            SS bag cont. 10 pcs.           4001116 30270 1
 M4                            4.3 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30271 8
 M5                            5.3 mm                          10.0 mm                           1.0 mm                             SS bag cont. 6 pcs.           4001116 30272 5
 M6                            6.4 mm                          12.5 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30273 2
 M8                            8.4 mm                          17.0 mm                           1.6 mm                             SS bag cont. 4 pcs.           4001116 30274 9
 M 10                         10.5 mm                          21.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30275 6
 M 12                         13.0 mm                          24.0 mm                           2.5 mm                             SS bag cont. 2 pcs.           4001116 30276 3
 M 14                         15.0 mm                          28.0 mm                           2.5 mm                             SS bag cont. 2 pcs.           4001116 30277 0
 M 16                         17.0 mm                          30.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30278 7
 M 20                         21.0 mm                          37.0 mm                           3.0 mm                             SS bag cont. 1 pc.            4001116 30279 4




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.52
                                                            combitech system · Basis
                                                                                                   ®




                                                            System accessories

                                                            Washer, DIN 125




                                                            Min. OU = 5 pcs.


                                                             for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
                                                             Stainless steel V2A
                                                             M3                            3.2 mm                            7.0 mm                          0.5 mm                            SS bag cont. 10 pcs.           4001116 30280 0
                                                             M4                            4.3 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30281 7
                                                             M5                            5.3 mm                          10.0 mm                           1.0 mm                             SS bag cont. 6 pcs.           4001116 30282 4
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                             M6                            6.4 mm                          12.5 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30283 1
                                                             M8                            8.4 mm                          17.0 mm                           1.6 mm                             SS bag cont. 4 pcs.           4001116 30284 8
                                                             M 10                         10.5 mm                          21.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30285 5
                                                             M 12                         13.0 mm                          24.0 mm                           2.5 mm                             SS bag cont. 2 pcs.           4001116 30286 2
                                                             M 16                         17.0 mm                          30.0 mm                           3.0 mm                             SS bag cont. 2 pcs.           4001116 30288 6
                                                             M 20                         21.0 mm                          37.0 mm                           3.0 mm                             SS bag cont. 1 pc.            4001116 30289 3


                                                            Washer, DIN 125




                                                            Min. OU = 5 pcs.


                                                             for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
                                                             Solid brass
                                                             M3                            3.2 mm                            7.0 mm                          0.5 mm                            SS bag cont. 10 pcs.           4001116 30290 9
                                                             M4                            4.3 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30291 6
                                                             M5                            5.3 mm                          10.0 mm                           1.0 mm                             SS bag cont. 6 pcs.           4001116 30292 3
                                                             M6                            6.4 mm                          12.5 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30293 0
                                                             M8                            8.4 mm                          17.0 mm                           1.6 mm                             SS bag cont. 4 pcs.           4001116 30294 7
                                                             M 10                         10.5 mm                          21.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30295 4
                                                             M 12                         13.0 mm                          24.0 mm                           2.5 mm                             SS bag cont. 2 pcs.           4001116 30296 1




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.53
  alfer
                              ®




combitech system · Basis
                                       ®




System accessories

Washer, DIN 125




Min. OU = 5 pcs.


 for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
 Plastic (PA)
 M3                            3.2 mm                            7.0 mm                          0.5 mm                            SS bag cont. 10 pcs.           4001116 30300 5
 M4                            4.3 mm                            9.0 mm                          0.8 mm                            SS bag cont. 10 pcs.           4001116 30301 2
 M5                            5.3 mm                          10.0 mm                           1.0 mm                             SS bag cont. 6 pcs.           4001116 30302 9




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
 M6                            6.4 mm                          12.5 mm                           1.6 mm                             SS bag cont. 6 pcs.           4001116 30303 6
 M8                            8.4 mm                          17.0 mm                           1.6 mm                             SS bag cont. 4 pcs.           4001116 30304 3
 M 10                         10.5 mm                          21.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30305 0
 M 12                         13.0 mm                          24.0 mm                           2.5 mm                             SS bag cont. 2 pcs.           4001116 30306 7


Serrated lock washer, DIN 6798A




Min. OU = 5 pcs.


 for thread                     Dim. d                          Dim. d1                           Dim. b                                 Packaging                  EAN / Item no.
 Galvanized steel
 M3                            3.2 mm                            6.0 mm                          1.2 mm                            SS bag cont. 10 pcs.           4001116 30320 3
 M4                            4.3 mm                            8.0 mm                          1.4 mm                            SS bag cont. 10 pcs.           4001116 30321 0
 M5                            5.3 mm                          10.0 mm                           1.7 mm                             SS bag cont. 6 pcs.           4001116 30322 7
 M6                            6.4 mm                          11.0 mm                           1.8 mm                             SS bag cont. 6 pcs.           4001116 30323 4
 M8                            8.4 mm                          15.0 mm                           2.0 mm                             SS bag cont. 4 pcs.           4001116 30324 1
 M 10                         10.5 mm                          18.0 mm                           2.2 mm                             SS bag cont. 4 pcs.           4001116 30325 8
 M 12                         13.0 mm                          20.5 mm                           2.4 mm                             SS bag cont. 2 pcs.           4001116 30326 5




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.54
                                                            combitech system · Basis
                                                                                                   ®




                                                            Tool assortment

                                                            Piccolo-mitre box MP 7
                                                            2 premilled bevel cuts 45° · 1 premilled bevel cut 90° ·
                                                            with replaceable wood insert · with a stopping flange to
                                                            prevent slip · with a clamp element (to enable the work-
                                                            piece to be held in 3 positions)
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 1 pcs.


                                                             Dim. a                                           Dim. b                                          Dim. c                                 Packaging                  EAN / Item no.
                                                             Uncoated aluminium
                                                             30.0 mm                                        40.0 mm                                        180.0 mm                                      loose                4001116 41120 5




                                                            Precision-mitre box MP 8
                                                            2 premilled bevel cuts 45° · 1 premilled bevel cut 90° ·
                                                            with replaceable wood insert




                                                            Min. OU = 1 pcs.


                                                             Dim. a                                           Dim. b                                          Dim. c                                 Packaging                  EAN / Item no.
                                                             Uncoated aluminium
                                                             40.0 mm                                        57.0 mm                                        248.0 mm                                      loose                4001116 41121 2




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.55
  alfer
                              ®




combitech system · Basis
                                       ®




Tool assortment

Precision-mitre box MP 9
2 premilled bevel cuts 45° · 1 premilled bevel cut 90° ·
with replaceable wood insert




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 1 pcs.


 Dim. a                                           Dim. b                                          Dim. c                                 Packaging                  EAN / Item no.
 Uncoated aluminium
 70.0 mm                                        50.0 mm                                        248.0 mm                                      loose                4001116 41122 9




Precision-mitre box MP 11
2 premilled bevel cuts 45° · 1 premilled bevel cut 90° ·
with replaceable wood insert · with a stopping flange to
prevent slip




Min. OU = 1 pcs.


 Dim. a                                           Dim. b                                          Dim. c                                 Packaging                  EAN / Item no.
 Uncoated aluminium
 34.0 mm                                      100.0 mm                                         248.0 mm                                      loose                4001116 41124 3




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.56
                                                            combitech system · Basis
                                                                                                   ®




                                                            Tool assortment

                                                            Precision-mitre box with clamp element
                                                            MP 10
                                                            2 premilled bevel cuts 45° · 1 premilled bevel cut 90° ·
                                                            with replaceable wood insert · with foot elongation (for
                                                            fixation with clamps) · with a clamp element (to enable
                                                            the workpiece to be held in 3 positions)
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Min. OU = 1 pcs.


                                                             Dim. a                                           Dim. b                                          Dim. c                                 Packaging                  EAN / Item no.
                                                             Uncoated aluminium
                                                             50.0 mm                                        73.0 mm                                        248.0 mm                                      loose                4001116 41123 6




                                                            ‘Vario’-mitre box MP 14
                                                            2 premilled bevel cuts 45° · 1 premilled bevel cut 90° ·
                                                            with replaceable wood insert · with foot elongation (for
                                                            fixation with clamps) · with a clamp element (to enable
                                                            the workpiece to be held in 3 positions) · with 2 prisms
                                                            MP 10 (enables especially round tubes and round bars to
                                                            be fixed in the middle)




                                                            Min. OU = 1 pcs.


                                                             Dim. a                                       Dim. b                                       Dim. c                                        Packaging                  EAN / Item no.
                                                             Uncoated aluminium
                                                             50.0 mm                                    73.0 mm                                     248.0 mm                                     SS cardboard box             4001116 41127 4




                                                                 ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.57
  alfer
                              ®




combitech system · Basis
                                       ®




Tool assortment

2 prisms MP 13 (for mitre box MP 10)
enables especially round tubes and round bars to be fixed in the middle




Min. OU = 1 pcs.


                                                                                                                                         Packaging                  EAN / Item no.
 Uncoated aluminium
                                                                                                                                        SS skinpack               4001116 41126 7


Multi-clamp




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
With the multi-clamp, you have a reliable tool when chamfering, drilling,
planing, sawing, etc.
– Reliable clamping in any position – horizontal, vertical, and even in front of
  the workbench.
– Precise and clean alignment of planks when gluing and doweling or plug-
  ging.
– An indispensable aid when clamping strips to mitre.

Min. OU = 1 pcs.


 Contents                                                                                                                                Packaging                  EAN / Item no.
 Uncoated aluminium
 3-part                                                                                                                              SS cardboard box             4001116 45152 2
 4-part                                                                                                                              SS cardboard box             4001116 45153 9




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.58
                                                            combitech system · Basis
                                                                                                   ®




                                                            Tool assortment

                                                            ‘Profi’ keyhole saw
                                                            ‘Profi’ keyhole saw 5T, with 5 saw blades: 28 / 35 / 50 / 68 / 75 mm
                                                            ‘Profi’ keyhole saw 6T, with 6 saw blades: 46 / 53 / 60 / 67 / 74 / 81 mm
                                                            ‘Profi’ keyhole saw 1T, with 1 saw blade: 68 mm for sockets




                                                            Min. OU = 5 pcs.


                                                             type                                                                                                                                    Packaging                  EAN / Item no.
                                                             Steel
                                                             5T                                                                                                                                       clap-pac                4001116 40100 8
                                                             6T                                                                                                                                       clap-pac                4001116 40101 5
                                                             1T                                                                                                                                       clap-pac                4001116 40119 0
Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008




                                                            Mini-saw
                                                            Low weight and ergonomically-shaped handle, torsion-stiff, profiled saw bow from aluminium diecasting continu-
                                                            ously adjustable saw blade from high-quality HSS bimetal (length: 150 mm), stable and durable, saws metal, wood,
                                                            plastic, etc.




                                                            Min. OU = 5 pcs.


                                                             Colour                                                                                                                                  Packaging                  EAN / Item no.
                                                             Uncoated aluminium
                                                             uncoated                                                                                                                                    loose                4001116 45110 2


                                                            Maxi-saw
                                                            Low weight, and ergonomically-shaped handle, torsion-stiff, profiled saw bow from aluminium diecast continu-
                                                            ously adjustable saw blade from high-quality HSS bimetal (length: 300 mm), stable and durable, saws metal, wood,
                                                            plastic, etc.




                                                            Min. OU = 5 pcs.


                                                             Colour                                                                                                                                  Packaging                  EAN / Item no.
                                                             Uncoated aluminium
                                                             uncoated                                                                                                                                    loose                4001116 45111 9




                                                                  ®

                                                            alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


                                                                                                                                                                                                                                          1.59
  alfer
                              ®




combitech system · Basis
                                       ®




Tool assortment

‘Profi’-ruler




Min. OU = 5 pcs.


 length                                                                                                                                  Packaging                  EAN / Item no.
 Uncoated aluminium
 300.0 mm                                                                                                                                    loose                4001116 41200 4
 1000.0 mm                                                                                                                                   loose                4001116 41201 1


‘Profi’-angle, with bevel ruler and parallel-template




                                                                                                                                                                                           Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008
Min. OU = 5 pcs.


 length                                                                                                                                  Packaging                  EAN / Item no.
 Uncoated aluminium
 250.0 mm                                                                                                                                    loose                4001116 41215 8
 300.0 mm                                                                                                                                    loose                4001116 41216 5
 400.0 mm                                                                                                                                    loose                4001116 41217 2
 500.0 mm                                                                                                                                    loose                4001116 41218 9




                       User tips
                       With the professional angle with integrated mitre ruler you can not only draw 90° angles as with conventional angles, but also all
                       other lines of degrees between 0° and 90°.




     ®

alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com


1.60
alfer
                    ®




Terms of Payment and Delivery


Preamble, Scope                                                            ready for shipment and the shipment, forwarding or acceptance is            we are liable as provided by law to the extent we have culpably
All our offers and all agreements closed with us – including those         delayed, the risk of loss of the goods passes to the Customer when          breached a material contractual duty. In this case too, however,
for future goods and services – are subject to the terms and condi-        they are ready for delivery. This shall not apply if we are responsible     damage liability is limited to the typically foreseeable damage.
tions set forth herein.                                                    for the delay. Invoicing shall be governed by the weights and nu-           Irrespective of the legal nature of any asserted claim, any further li-
The ordering party (hereinafter: “Customer”) accepts these terms           merical count established at the time of dispatch.                          ability on our part to the Customer – beyond the foregoing provi-
and conditions for payment and delivery upon placing an order and                                                                                      sions – is precluded. This applies in particular to compensatory dam-
at the latest upon acceptance of delivery. If the Customer has con-        Delivery Times                                                              age claims arising from faults during contract closing, from indirect
flicting terms and conditions for purchase they shall be valid only if     Quoted delivery periods are generally nonbinding. The delivery pe-          and consequential damage and from other breaches of duty or tort
expressly accepted by us in writing. Deviations from these terms           riod begins with the day the order confirmation is sent, but not be-        claims for property damage pursuant to § 823 BGB. The same shall
and conditions require written agreement. Counter-confirmations by         fore all contract details have been finalised. It is deemed to have         also apply to the personal liability of our managers, employees, rep-
Customer referencing its standard terms and conditions are hereby          been met if the goods leave the plant or representative’s logistics         resentatives and vicarious agents.
expressly excluded. Our terms and conditions for payment and de-           warehouse on time or, in the event of impossibility of shipment, the
livery shall therefore govern exclusively and without limitation, even     goods are reported ready to ship by the end of the period. The de-          Reservation of Title
if we are aware of Customer terms and conditions that conflict or          livery period shall be reasonably extended – including in the case a        Until all payment claims under the business relationship are fulfilled
deviate from the present terms and conditions and we deliver to the        default in delivery – if unforeseen hindrances occur, which we could        – including any refinancing or reverse bills of change – we reserve
Customer without express reservation.                                      not prevent despite our exercise of reasonable care, regardless             title to goods delivered by us, which Customer may only dispose of
                                                                           whether these circumstances occur at our place of business or that          in the ordinary course of business (balance or current account
Offers and Acceptance of Orders                                            of our supplier – e.g. business disruption, official intervention, labour   clause).
All offers are nonbinding. Models, pictures, drawings, dimensions,         unrest, delays in the delivery of essential materials. The occurrence       Further processing of goods delivered by us does not entitle Cus-
weights, colour shades etc. presented in catalogues, prospectuses          of such circumstances shall be promptly communicated to the Cus-            tomer to any proprietary interest in the fully or partly produced goods
and other printed materials represent approximate values as gener-         tomer. If the agreement is subsequently modified in a manner that           delivered. Such processing inures exclusively to our benefit at no
ally applicable in the industry.                                           influences the delivery period, the period shall in the absence of a re-    cost to us. However, should the reservation of title expire due to any
Without exception, information concerning the execution, dimen-            spective contract provision be reasonably extended to take account          given circumstance, alfer and the Customer hereby already agree
                                                                                                                                                                                   ®




sions etc. of special, bespoke orders require written confirmation.        of this modification. Default in delivery shall be governed as pro-         that title to such goods shall pass to alfer after reprocessing. alfer
                                                                                                                                                                                                   ®                          ®




We are not liable for errors attributable to documents supplied by the     vided by law subject to the following:                                      accepts this transfer of title. Customer shall be the uncompensated
Customer. We reserve the right to make design and model changes            The Customer may demand compensatory damages for non-per-                   custodian of these reprocessed goods (manufacturer and repro-
that appear necessary based on our experience. Customer acquires           formance under § 281, 323 BGB only to the extent that third parties         cessing clause).
no rights in any tools for which it has reimbursed all or a portion of     assert a damage claim against it. Compensation for lost profits is          By reprocessing goods that are still the property of third parties we
the cost; they remain our property. Any samples requested shall be         excluded. Compensatory damages shall not exceed the value of the            acquire co-ownership in the new goods. Our co-ownership interest
delivered only against an invoice.                                         goods. We shall be responsible for delays in the delivery of goods          shall be proportional to the ratio of the invoice value of the goods de-
                                                                           and services due to ordinary negligence only if these are delays            livered by us to the invoice value of all other goods (reprocessing
Invoicing, Payment                                                         common to this type of agreement. Should we be responsible for              and co-mingling clause).
Our invoices are payable within 10 days of delivery with a 2% dis-         gross negligence, we will compensate the damage caused by the               Customer hereby assigns to us the claims accruing to it from the re-
count for prompt payment or net within 30 days or as provided by           delay. Compensatory damages shall not exceed the value of the               sale of goods subject to reservation of title, including goods which
special written agreement. Payment default shall be governed as            goods.                                                                      have been reprocessed. If the reprocessed product of our goods
provided by law. Timeliness of Customer payment shall be governed          Setting a due date for performance is ineffective if the delay in de-       subject to reservation of title contains items that either belonged ex-
by the date the account designated for payment is credited. For fac-       livery is attributable to force majeure or circumstances for which we       clusively to us or were delivered subject to our reservation of title,
toring purposes, we may assign rights under our business relation-         are not answerable. Force majeure shall apply if we are prevented           Customer shall assign to us its entire purchase price claim. In other
ship with the Customer.                                                    from performing our responsibilities by unforeseen – in particular ex-      cases, i.e. in the event of simultaneous advance assignments to mul-
The Customer shall bear the costs of payments made by bill of ex-          ternal – circumstances that we could not prevent in the given cir-          tiple suppliers, we shall be entitled to a fraction of the claim corre-
change including, in particular, discounting and collection fees. No       cumstances despite exercise of reasonable care. Force majeure in-           sponding to the ratio of the invoice value of our goods subject to
prompt payment discount is granted in the case of payment by bill          cludes strikes and lockouts. Customer shall be informed immediately         reservation of title to the invoice value of all other reprocessed items
of exchange. Invoiced bill of exchange costs are payable immedi-           of the occurrence of force majeure.                                         (assignment in advance).
ately without discount. Bills of exchange and checks shall not be                                                                                      We hereby undertake to release the collateral to which we are enti-
deemed payment until encashed.                                             Delivery Volume                                                             tled under the above provisions at the request of Customer to the
Customer shall have rights of set off only if the respective counter-      Adherence to exact numerical count is not possible for customised           extent that the realizable value of the collateral exceeds the value of
claim has been determined with legal finality, is undisputed or has        bespoke products. Bespoke products include all goods that diverge           our secured claims by more than 20% (release clause).
been acknowledged. In addition, the exercise of a right to withhold        from the description in the respectively valid catalogue and/or             Provided Customer fulfils its payment obligations to us, Customer
performance is permissible only if the counterclaim is based on the        prospectus. This applies in particular with regard to colours.              shall be entitled to collect accounts receivable for its own use until
same legal relationship.                                                                                                                               this entitlement is revoked. The right to resell or reprocess the goods
We have the right to apply Customer payments first to any older            Defect Complaints, Liability                                                and collect accounts receivable shall lapse upon cessation of pay-
Customer debt.                                                             After goods have arrived at their destination, Customer shall               ments, application for insolvency proceedings, dishonour of a check
If the due payment date is not observed, we may, subject to other          promptly inspect them and meet its obligations under § 377 Ger-             or bill of exchange, or seizure. Assigned accounts receivable paid
claims, charge fees and late payment interest at a rate at least equal     man Commercial Code (HGB). The duty of the Customer to inspect              thereafter shall be credited immediately to a specially designated
to the interest rates charged by banks for current loans. Failure to       extends to the entire delivery. Shipping documents may not be               account (direct debit authority).
meet the due payment date shall cause all claims, without regard to        signed (including subject to reservation) before the number of car-         Any return of goods shall be accepted only for reasons of safety;
the maturity of any outstanding bills of exchange, to become im-           tons delivered is compared with the information on the shipping doc-        even where part payments were subsequently accepted, this shall
mediately due and payable. In addition, in such case we shall be en-       uments. Information concerning missing cartons or damage must               not constitute contract rescission. Rescission is not required to as-
titled to demand advance payment for further deliveries, rescind the       be noted accurately on the shipping documents and confirmed by              sert a reservation of title, unless the Customer is a consumer.
agreement and have any goods delivered subject to reservation of           the driver’s clearly identifiable signature.
title returned to us at Customer’s expense. The same shall apply if,       Obvious defects shall be reported to us immediately after receipt of        Data Collection and Storage
after closing the agreement, we learn of circumstances that dimin-         the goods, i.e. on the delivery date. Defect complaints must be com-        We may collect, store, process, use and forward information and
ish Customer’s credit worthiness.                                          municated in writing and include precise details of the alleged indi-       data concerning the Customer to third parties for storage, process-
                                                                           vidual defects. Non-obvious defects shall be reported to us in writ-        ing and use – in particular for the purposes of claim collection or
Prices                                                                     ing promptly after their discovery but no later than within five            outsourced accounts receivable management.
Orders for which no fixed price has been expressly agreed shall be         business days after goods delivery. Problems or defect complaints
invoiced at the price prevailing on the delivery date. If there is a ma-   asserted later do not substantiate any entitlement to supplementary         Product Liability
terial change in certain cost factors including, in particular, labour,    performance, rescission, price reduction, compensatory damages              We are liable as provided by German product liability law (Produkt-
component materials or freight, the agreed price may be reasonably         or reimbursement of futile expenses.                                        haftungsgesetz).
adjusted commensurate with the influence of the respective cost            Goods that are subject to a complaint shall be properly stored and
factors. Unless the order confirmation provides otherwise, prices are      placed at our disposal. We shall be granted opportunity to inspect          Place of Performance, Jurisdiction and Venue
quoted ex our plant or our representative’s logistics warehouse.           goods subject to a complaint (duty to present for inspection).              The place of performance for delivery and payment is our registered
Goods with a minimum order value from EUR 500.00 (excl. VAT) are           If a defect is substantiated, we may, at the Customer’s option, ren-        office (Wutöschingen).
delivered free of charge within Germany or to the German border for        der subsequent performance by curing the defect or promptly de-             Our contractual relationship with the Customer shall be governed
delivery abroad. An initial order must be at least EUR 150.00 (excl.       liver defect-free replacement goods in exchange for the goods that          by German law – under exclusion of the UN Sales Convention. The
VAT) and all further orders at least EUR 25.00 (excl. VAT). Prices         are subject to the complaint. In the event of subsequent perform-           provisions of the UN Convention on the Assignment of Receivables
quoted in catalogues and price lists (excl. VAT) are prices only for re-   ance or replacement delivery, we shall be obliged to bear all costs         in International Commerce are hereby deemed agreed, subject to
sellers.                                                                   incurred by subsequent performance (in particular shipping, rout-           their entering into effect and from the moment they have entered
                                                                           ing, labour and material costs), to the extent that they are not in-        into effect.
Packaging                                                                  creased by delivery to a place other than the place of performance.
Packaging costs are invoiced according to industry practice.               We shall determine the method of shipment. If the attempted sub-            Validity of the Agreement
                                                                           sequent performance fails, the Customer shall be entitled to a price        If individual provisions are legally ineffective, the agreement shall
Shipping, freight, and risk of loss                                        reduction or contract rescission. The statute of limitations for as-        otherwise remain binding.
Deliveries are from our plant or our representative’s logistics ware-      serting defect claims is 12 months calculated from the passage of
house. If the goods are shipped or delivered to Customer’s place of        risk of loss.                                                               alfer aluminium Gesellschaft mbH
                                                                                                                                                            ®




business at his demand, the risk of total loss or accidental diminu-       If the Customer asserts compensatory damage claims due to inten-            Commercial Register of the Municipal Court of Freiburg HRB 620 227
tion in the value of the goods shall pass to the Customer upon de-         tional or grossly negligent conduct, including intentional or grossly
livery to the shipping agent (§ 447 German Civil Code – BGB) but no        negligent conduct of our representatives or vicarious agents, we            Position:10/2008
later than their departure from our plant or our representative’s lo-      shall be liable as provided by law. To the extent we are not charged
gistics warehouse, regardless whether they are shipped from the            with intentional breach of contract, our liability for compensatory
place of performance or who pays the shipping cost. If the goods are       damages is limited to the typically foreseeable damage. Likewise




alfer aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com
      ®
alfer
                        ®



aluminium
                              4<ALBBMR=jjjbfe>
alfer aluminium
     ®




Gesellschaft mbH
Horheim, Industriestrasse 7
D-79793 Wutoeschingen

Tel.: +49 (0)7746 9201-0
Fax: +49 (0)7746 9201-92

E-mail: info.eng@alfer.com




                                                 Hardware catalogue · Chapter 1 · 99915 024 · 71708 · 1008

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:7
posted:9/9/2010
language:English
pages:64