DSL Modem Reset by eot15664

VIEWS: 15 PAGES: 1

									    Resetting User-Name and Password of a DSL                                                                       DSL Modem Reset
                Modem or Gateway                                                                       Westell WireSpeed™ 2110 & 2200 DSL Modem
      Your modem or gateway has its own user name and password. The                                   Follow the steps below to reset the Westell DSL modem to factory settings:
      user name and password provide access to tools for configuring your
      modem or gateway.                                                                         •     Make sure the power is ON.
                                                                                                •     Insert a paper clip into the small hole on the back of the modem. See the picture
      If you don't know the User Name and Password for the modem or                                   below for the exact location:
      gateway you must reset the device to factory settings. Depends on the                     •     Hold the paper clip in place for at least 10 seconds and then release the reset by
      type of device you have, you should apply the proper instructions in                            removing the paper clip.
      the following slides to change the setting of the device to factory                       •     Wait for the lights on the modem to turn steady green. This may take a few
                                                                                                      minutes.
      Default setting.




           For more information, please contact Verizon Online Support at (866) 268-4360.
                                                                                            1                                                                                                2




                  DSL Gateway Reset                                                                             Linksys Router Reset
                Westell VersaLink™ 327W Gateway                                                             Wired or Wireless Routers and Gateways
Follow the steps below to reset the Westell 327W Gateway to the factory settings:                   Follow the steps below to reset the Linksys Router to factory settings:

•     Make sure the power is ON.
                                                                                                •   Make sure the power is ON.
•     Insert a paper clip into the small hole on the back of the modem labeled Reset.
      See the picture below for the exact location                                              •   Insert a paper clip into the small hole on the back of the modem. See the picture
•     Hold the paper clip in place for at least 10 seconds and then release by removing             below for the exact location:
      the paper clip.                                                                           •   Hold the paper clip in reset button for 30 seconds or more and the router will be
•     Wait for the lights on the modem to turn steady green. This may take a few                    restored to factory defaults. This also means that your configuration will be set to
      minutes.
                                                                                                    factory defaults also, so if your router is configured for your ISP you may loose your
                                                                                                    connection until you set the unit up again.
                                                                                                •   If you have a wireless router and you have enabled WEP on the router, you need to
                                                                                                    setup WEP keys again to secure your wireless connection.
                                                                                                •   The default password for the router is admin in lower case letters.




                                                                                            3                                                                                                4

								
To top