Software installation and hardware key by zed18012

VIEWS: 22 PAGES: 2

									                                                      1                                          09-051 PMO


1         Software installation and hardware key
VISION NETWORK ANALYSIS INSTALLATION

Vision Network analysis will be installed on a computer as follows:
· insert the CD-ROM in the computer drive
· start the "Autorun.exe" program, if not started automatically
· install Vision Network analysis
· next, install either the PC key software or the network key software, as described in the next chapter
· plug the PC key into the computer's USB port.


SOFTWARE INSTALLATION FOR PC-KEY OR NETWORK KEY

The right to use Vision is provided by the hardware key supplied with the software. Without a PC key or network
key, Vision can only be used in demonstration mode. In this mode, Vision does not allow the user to save network
files, and calculations can only be made for networks of a limited size.


Driver for SuperPro PC key




When using Vision with the SuperPro PC key, installation of the Sentinel driver is mandatory. This driver looks after
communication between the computer and the key.

Installation of the Sentinel driver:
· place the CD in the computer
· start the "Autorun.exe" program, if not started automatically
· select: Sentinel System Driver.


Unikey PC key




The Unikey PC key does not require installation of any driver software.


Protection server (spnsrvnt.exe) for SuperProNet Network key

When using Vision with the SuperProNet network key, the Sentinel driver and the Sentinel Protection Server must
be installed on the computer where the network key is to be found. The driver looks after communication between
the computer and the network key; the server looks after communication between the computer and the clients,
using the TCP/IP protocol and port 6001. Nothing needs to be installed on the clients.
                                                       2                                   09-051 PMO

Installation of the Sentinel driver and the Sentinel Protection Server:
· place the CD in the computer
· using the Windows Explorer, go to directory "Sentinel"
· start: Sentinel Protection Installer 7.5.0.exe
· select: Custom
· select: Sentinel System Drivers
· and select: Sentinel Protection Server.

The driver and the server are both installed.


Options in Vision

With Tools | Options | Key the options for use of the network key can be defined.

SuperProNet network key
By checking this item Vision assumes use of a Sentinel SuperProNet network key. However, Vision always checks
first whether a PC key is present, and uses it if valid.

Server
Optionally the IP number of the server containing the SuperProNet can be entered. Communication may improve.

								
To top