ASSEMBLY INSTRUCTIONS Caution ! by iyf57920

VIEWS: 12 PAGES: 4

									                                                          ASSEMBLY INSTRUCTIONS
                                                                       Caution !
Watch your fingers when adjusting clamps. They may become pinched resulting in injury.
Be careful around pipe ends, inside the pipe and screw ends. Metal shavings, etc. May injure your fingers.


  Inside This Package
  Before assembly, please make sure that all the items listed below are present.
[CYMBAL 3PCS] box                                                                                                       [BASS DRUM PEDAL] box

Cymbal Pad x 3                                                                                                             Kick Pad           Beater    [DD502(D)]




                                                                                                                                              Foot Pedal


[DRUM PADS] box                                      [DRUM PADS] box

Drum Pad x 2                                          Drum Pad x 2



                                                                                                                           Stand x 2



Metal Rod x 2                                         Metal Rod x 2




[ACCESSORIES] box                                                                                           [HI-HAT PEDAL] box
Cymbal holder (L) x 2                                              Drumstick x 2                             Hi-Hat control pedal             Optional Parts
                                                                                                             [DD502/DD502(D)]                 Hi-Hat control pedal/
                                                                                                                                              Kick Trigger
                                                                                                                                              [DD502(S)]



                                                                   Connecting Cable x 9
Cymbal holder (S)                   Metal Rod

                                                                                                            [DRUM MODULE] box                 Kick Trigger
                                                                                                                                              [DD502]
                                                                                                            Drum module
 Hexagon Key (5mm)                  Drum Key                       AC Adaptor

                                                                   Instruction Manual

                                                                   Assembly Instructions


Side Arm (L1)                                        Side Arm (L2)                                Side Arm (R)




          Cymbal holder clamp     Holder clamp                Holder clamp                        Cymbal holder clamp       Holder clamp


Pillar (L)                                                                         Pillar (R)
                                        Connector                                               Connector     Cross pipe




                 Clamp                                                                                                             Clamp

Leg (L)                                             Leg (R)                                            Center Pipe
       Clamp         Cross pipe      Connector                                     Clamp                                        Connector




                 Rubber Foots                                      Rubber Foots                                                Holder clamp
Assembly

1 Setting up the frame of the digital drum set              Pillar (L)                                                              Pillar (R)
  [1] Attach the Pillar (L) to the clamp on the Leg (L).
  [2] Using the hexagon key, tighten the screws on the clamp.
  [3] Remove the screw attached to the connector.
  [4] Attach the cross pipe to the connector.
  [5] Reattach the screw into the connector
  [6] Tighten the screw on the connector.
  [7] Attach the Pillar (R) to the clamp on the Leg (R).
                                                                                [3],[5],[6]
  [8] Tighten the screws on the clamp.
  [9] Attach Center Pipe to the clamp on the Leg (L).
                                                                                   [4]
  [10] Tighten the screws on the clamp.                                                                      Cross pipe
                                                            [1]                                                                             [7]
  [11] Attach the Right Leg Assembly to the Center Pipe.                                 [6]
  [12] Tighten the screws on the clamp.
  [13] Remove the screw attached to the connector
  [14] Attach the cross pipe to the connector.
  [15] Reattach the screw into the connector.                      [2]     Leg (L)                                   Leg (R)        [8]
  [16] Tighten the screw on the connector.                          Left Leg Assembly                   Right Leg Assembly

  Pillar (L)                  Center Pipe          Center Pipe                                          [13],[15],[16]
                [9]                                                          [12]
  [10]
                                                                                    [11]




                                                                                                              [14]

                                                                                                                     [16]
                                                                           Cross pipe




                                                                                    Pillar (L)
  [17] Attach the Side Arm (L1) to the clamp on the Pillar (L) .
  [18] Tighten the screws on the clamp.
  [19] Attach the Side Arm (L2) to the clamp on the Pillar (L).
  [20] Tighten the screws on the clamp.                                       [17]
  [21] Attach the Side Arm (R) to the clamp on the Pillar (R)
  [22] Tighten the screws on the clamp.                                                          [18]



                                                                          Side Arm (L1)




                 Pillar (L)                                                                                            Pillar (R)



     Side Arm (L1)                                                                                                          [22]

                                                                                                                             [21]


               [19]
                                       [20]




          Side Arm (L2)                                                                                                      Side Arm (R)
2 Attaching the drum pads                                   [1]                 [3]                              [4]
  [1] Loosen the wing nuts on the                   [2]
      drum pads .
  [2] Remove the Metal Rods.
  [3] Reattach the Metal Rods to
       the drum pads.
  [4] Tighten the wing nuts securely.

                                                                         Wing nut                                               Drum Pad Assembly


  [6] Attach the drum pads assemblies to the holder clamps and adjust their position,
      then tighten the wing nuts on the Holder clamps.                            [6]                                     [6]

                       Holder clamp     Holder clamp




                                                                                            [6]                                            [6]




     Holder clamp                                         Holder clamp




3 Attaching the cymbal pads
                                                                                                                       Cymbal holder (L)
  [1] Attach the Cymbal holders to the Holder clamps on the
      Side Arms.
  [2] Tighten the wing nuts on the Holder clamps.
  [3] Remove the wing nut and one of the felt washer of each                          Cymbal holder (S)

      Cymbal holders.                                                                                  [1],[2]
  [4] Attach the Cymbal pads to the cymbal holders,
     make sure the pin is inside the pin holder.                                             [1],[2]
  [5] Reattach the felt washer and wing nut,                                                                                                     [1],[2]
      tighten the wing nut of each cymbal holders.

Wing nut


                      [3]                   Pin holder                                [4]
Felt washer

                      [3]

                      Pin
Felt washer




                    Wing nut
                                      [5]

               Felt washer
4 Attaching the Drum Module                                                           Wing screw
  [1] Attach the Metal Rod to the Drum Module.
  [2] Tighten the wing screw securely on the Drum Module.
  [3] Attach the Metal Rod to the Holder clamp on the                                              [2]
      Side Arm (L1) and adjust the position.
  [4] Tighten the wind nut on the Holder clamp.
                                                                    Metal Rod                                        [3],[4]


                                                                                      [1]



5 Attaching the Kick Trigger
  A Phillips (+) screwdriver is required when attaching the Kick Trigger, please prepare one before assembly.
  [1] Using the Drum Key to loosen the square head set screws
       attached to the rear of Kick pad.                                                                                                       [3]
  [2] Attach the Stands to the Kick Pad.                                                       [1]
  [3] Using the Drum Key, tighten the square head set screws,
       the stands are firmly secured.
  [4] Attach the Rod to the holders.                                                                                                     [2]
  [5] Remove the screws attached to the Kick Pedal.
  [6] Attach the Kick Pedal to the Kick Pad.                                                               [2]
  [7] Tighten the screws securely there to fix the Kick Pedal and
       Kick Pad.
  [8] Tighten the wing screw on the Kick Pedal.
                                                                                     Square head set screw
  [9] Loosen the screw.
  [10] Attach the Beater to the Kick Pedal                                                                                                 Stand
  [11] Position the Beater from the center of the pedal, tighten the screw
                                                                                                                   [7]



                                  [4]

[4]
                                                                                                         [6]




                                        [5]


                   [8]                                     [9]                                            Beater

                                                                                                                                        [11]




                                                                                            [10]




                                                Cymbal Pad
6 Setup Example

                         Cymbal Pad           Drum Pad

               Drum Module




                                                                           Drum Pad

                    Drum Pad



                   Hi-Hat control pedal




                                                         Kick Trigger
                                                                                                                               Art No.:DD502 VER 007

								
To top