Firmware Updater Guide by zgm52709

VIEWS: 102 PAGES: 28

									Firmware Updater Guide

  magicolor 1650EN
  magicolor 2550/2550DN
  magicolor 4650EN/4650DN
  magicolor 5450
  magicolor 5550/5570
  magicolor 5650EN/5670EN
  magicolor 7440
  magicolor 7450
  magicolor 7450II
  pagepro 4650EN/5650EN
  bizhub C30P




                            4138-9560-08A
                             1760573-001I
Contents



1   Updating the Firmware (for Windows) ............................................................ 1
    System Requirements 2
    Starting the Firmware Updater 3
    For a Network Connection 6
       If Spooling of the Data Fails 8
    For a Local Connection 10
       If Spooling of the Data Fails 12
    When Specifying the IP Address of the Printer 14
       If Transferring of the Data Fails 16

2   Updating the Firmware (for Macintosh) ........................................................ 17
    System Requirements 18
    Starting the Firmware Updater 19
       If Transferring of the Data Fails 23




Contents                                                                                             i
ii   Contents
1   Updating the
    Firmware
    (for Windows)
System Requirements
    Computer:
    –   PC with a Pentium 2, 400 MHz or faster processor
        (A Pentium 3, 500 MHz or faster processor is recommended.)
    Operating system:
    –   Microsoft Windows XP Home Edition/Professional, Windows 2000,
        Windows Vista Home Basic/Home Premium/Business/Enterprise/
        Ultimate
    Available hard disk space:
    –   Approximately 20~26 MB
    Memory:
    –   128 MB or more
    Interface:
    –   10Base-T/100Base-TX/1000Base-T Ethernet
    –   USB 2.0 (High Speed) compliant
    –   Parallel (IEEE 1284)
    Compatible printer:
    –   magicolor 1650EN
    –   magicolor 2550
    –   magicolor 2550DN
    –   magicolor 4650EN/4650DN
    –   magicolor 5450
    –   magicolor 5550
    –   magicolor 5570
    –   magicolor 5650EN
    –   magicolor 5670EN
    –   magicolor 7440
    –   magicolor 7450
    –   magicolor 7450II
    –   pagepro 4650EN
    –   pagepro 5650EN
    –   bizhub C30P




2                                            System Requirements
Starting the Firmware Updater
     CAUTION
     You must have administrator privileges in order to update the firmware.


     CAUTION
     Before starting the firmware updater, turn on the printer, and make sure
     that it is correctly connected.


     CAUTION
     When the firmware is updated, the printer control panel settings may
     return to their defaults. Before starting the firmware updater, be sure to
     print the configuration page to check the settings. For details on
     printing the configuration page, refer to the printer’s User’s Guide.


     CAUTION
     Do not perform any of the following operations while updating the
     firmware.
     – Turn off the printer.
     –   Turn off the computer running the firmware updater.
     –   Exit the firmware updater.
     –   Send a print job to the printer from any other computer on the net-
         work.


            If the User Account Control window appears when installing on Win-
            dows Vista, click Allow button or the Continue button.
     The following procedure describes how to update the firmware for magicolor
     5450. Follow the same procedure to update the firmware for magicolor
     1650EN, magicolor 2550, magicolor 2550DN, magicolor 4650EN/4650DN,
     magicolor 5550/5570, magicolor 5650EN/5670EN, magicolor 7440, magi-
     color 7450, magicolor 7450II, pagepro 4650EN, pagepro 5650EN and bizhub
     C30P.
     1   Download the firmware updater from the web site.
     2   Double-click “5450Gxxxxxxxx.exe”.




Starting the Firmware Updater                                                    3
    3   The printer name and firmware version are displayed. Click the [Next] but-
        ton.




    4   The license agreement is displayed. Select “I agree”, and then click the
        [Next] button.




4                                        Starting the Firmware Updater
     5   The list of printer drivers is displayed. Select the appropriate connection
         for the environment where the printer is being used.




     For a Network Connection                 Select “Network port”. →Continue
                                              with page 6.
     For a Local Connection                   Select “Local port”. →Continue with
                                              page 10.
     When Specifying the IP Address of        Select “Printer IP address”. →Con-
     the Printer                              tinue with page 14.


            If you select “Network port” or “Local port”, make sure that the
            printer driver has been installed.
            If you select “Printer IP address”, the firmware can be updated even
            if a printer driver is not already installed.




Starting the Firmware Updater                                                          5
For a Network Connection
    When “Network port” is selected, a list of printer drivers for the network port
    appears.
    1   Select the printer driver, and then click the [Next] button.




    2   A message appears, requesting confirmation to update the firmware.
        Click the [Start] button to begin transferring the firmware.




6                                               For a Network Connection
    3   The result of the firmware transfer is displayed. Click the [Exit] button.




           If the firmware was successfully updated, the printer will automatically
           restart.
           Do not turn off the printer while its firmware is being updated.
    4   Print the configuration page from the printer’s control panel to check the
        settings.

           When the firmware is updated, the printer control panel settings may
           return to their defaults. Refer to the configuration page that was previ-
           ously printed to reset the settings from the printer’s control panel.

           For details on printing the configuration page and using the printer’s
           control panel, refer to the printer’s User’s Guide.




For a Network Connection                                                             7
    If Spooling of the Data Fails
      If spooling of the data fails, the following message appears.

             If spooling fails, data may remain in the printer spooler. Delete this
             data, and then try again.
             –   (Windows Vista)
                 Click “Control Panel” in the Start menu, then Printers, and then
                 double-click the appropriate printer icon. Select “5450Gxxxxxxxx”
                 below “Document Name”, and then click “Cancel All Docu-
                 ments” in the Printer menu or “Cancel” in the Document menu.
             –   (Windows XP)
                 Click “Printers and Faxes” in the Start menu, and then dou-
                 ble-click the appropriate printer icon. Select “5450Gxxxxxxxx”
                 below “Document Name”, and then click “Cancel All Docu-
                 ments” in the Printer menu or “Cancel” in the Document menu.
             –   (Windows 2000)
                 Click “Printers” in the Start menu, and then double-click the
                 appropriate printer icon. Select “5450Gxxxxxxxx” below “Docu-
                 ment Name”, and then click “Cancel All Documents” in the
                 Printer menu or “Cancel” in the Document menu.
      1   Click the [OK] button.




8                                                For a Network Connection
    2   Check that the printer is ready and that it is correctly connected, and then
        click the [Update again] button.




For a Network Connection                                                          9
For a Local Connection
     When “Local port” is selected, a list of printer drivers for the local port
     appears.
     1   Select the printer driver, and then click the [Next] button.




     2   A message appears, requesting confirmation to update the firmware.
         Click the [Start] button to begin transferring the firmware.




10                                                    For a Local Connection
    3   The result of the firmware transfer is displayed. Click the [Exit] button.




           If the firmware was successfully updated, the printer will automatically
           restart.
           Do not turn off the printer while its firmware is being updated.
    4   Print the configuration page from the printer’s control panel to check the
        settings.

           When the firmware is updated, the printer control panel settings may
           return to their defaults. Refer to the configuration page that was previ-
           ously printed to reset the settings from the printer’s control panel.

           For details on printing the configuration page and using the printer’s
           control panel, refer to the printer’s User’s Guide.




For a Local Connection                                                               11
 If Spooling of the Data Fails
     If spooling of the data fails, the following message appears.

            If spooling fails, data may remain in the printer spooler. Delete this
            data, and then try again.
            –   (Windows Vista)
                Click “Control Panel” in the Start menu, then Printers, and then
                double-click the appropriate printer icon. Select “5450Gxxxxxxxx”
                below “Document Name”, and then click “Cancel All Docu-
                ments” in the Printer menu or “Cancel” in the Document menu.
            –   (Windows XP)
                Click “Printers and Faxes” in the Start menu, and then dou-
                ble-click the appropriate printer icon. Select “5450Gxxxxxxxx”
                below “Document Name”, and then click “Cancel All Docu-
                ments” in the Printer menu or “Cancel” in the Document menu.
            –   (Windows 2000)
                Click “Printers” in the Start menu, and then double-click the
                appropriate printer icon. Select “5450Gxxxxxxxx” below “Docu-
                ment Name”, and then click “Cancel All Documents” in the
                Printer menu or “Cancel” in the Document menu.
     1   Click the [OK] button.




12                                                  For a Local Connection
    2   Check that the printer is ready and that it is correctly connected, and then
        click the [Update again] button.




For a Local Connection                                                           13
When Specifying the IP Address of the
Printer
     When “Printer IP address” is selected, the “Printer IP address” box
     becomes available.
     1   Type in the IP address, and then click the [Next] button.




     2   A message appears, requesting confirmation to update the firmware.
         Click the [Start] button to begin transferring the firmware.




14                   When Specifying the IP Address of the Printer
     3   The result of the firmware transfer is displayed. Click the [Exit] button.




            If the firmware was successfully updated, the printer will automatically
            restart.
            Do not turn off the printer while its firmware is being updated.
     4   Print the configuration page from the printer’s control panel to check the
         settings.

            When the firmware is updated, the printer control panel settings may
            return to their defaults. Refer to the configuration page that was previ-
            ously printed to reset the settings from the printer’s control panel.

            For details on printing the configuration page and using the printer’s
            control panel, refer to the printer’s User’s Guide.




When Specifying the IP Address of the Printer                                         15
 If Transferring of the Data Fails
     If transferring of the data fails, the following message appears.
     1   Click the [OK] button.




     2   Check that the printer is ready and that it is correctly connected, and then
         click the [Update again] button.




16                   When Specifying the IP Address of the Printer
2   Updating the
    Firmware
    (for Macintosh)
System Requirements
     Computer:
     –   Apple Macintosh computer with a PowerPC G3 or later processor
         (A PowerPC G4 or later is recommended.)
     –   Apple Macintosh computer with an Intel processor
     Operating system:
     –   MacOS X 10.2.8/10.3.x/10.4.x/10.5.x
         (We recommend installing the newest patch.)
     Available hard disk space:
     –   Approximately 30~42 MB
     Memory:
     –   128 MB or more
     Interface:
     –   10Base-T/100Base-TX/1000Base-T Ethernet
     Compatible printer:
     –   magicolor 1650EN
     –   magicolor 2550
     –   magicolor 2550DN
     –   magicolor 5450
     –   magicolor 5550
     –   magicolor 5570
     –   magicolor 7450
     –   magicolor 7450II
     –   bizhub C30P




18                                             System Requirements
Starting the Firmware Updater
     CAUTION
     You must have administrator privileges in order to update the firmware.


     CAUTION
     Before starting the firmware updater, turn on the printer, and make sure
     that it is correctly connected.


     CAUTION
     When the firmware is updated, the printer control panel settings may
     return to their defaults. Before starting the firmware updater, be sure to
     print the configuration page to check the settings. For details on
     printing the configuration page, refer to the printer’s User’s Guide.


     CAUTION
     Do not perform any of the following operations while updating the
     firmware.
     – Turn off the printer.
     –   Turn off the computer running the firmware updater.
     –   Exit the firmware updater.
     –   Send a print job to the printer from any other computer on the net-
         work.


     The following procedure describes how to update the firmware for magicolor
     5450. Follow the same procedure to update the firmware for magicolor
     1650EN, magicolor 2550, magicolor 2550DN, magicolor 5550, magicolor
     5570, magicolor 7450, magicolor 7450II and bizhub C30P.
     1   Download the firmware updater from the web site, and then decompress
         it.
     2   Double-click “5450Gxxxxxxxx”.




Starting the Firmware Updater                                               19
     3   The printer name and firmware version are displayed. Click the [Next] but-
         ton.




     4   The license agreement is displayed. Select “I agree”, and then click the
         [Next] button.




20                                        Starting the Firmware Updater
     5   The screen for specifying the IP address of the printer appears.




     6   Type in the IP address, and then click the [Next] button.




     7   A message appears, requesting confirmation to update the firmware.
         Click the [Start] button to begin transferring the firmware.




Starting the Firmware Updater                                                 21
     8   The result of the firmware transfer is displayed. Click the [Exit] button.




            If the firmware was successfully updated, the printer will automatically
            restart.
            Do not turn off the printer while its firmware is being updated.
     9   Print the configuration page from the printer’s control panel to check the
         settings.

            When the firmware is updated, the printer control panel settings may
            return to their defaults. Refer to the configuration page that was previ-
            ously printed to reset the settings from the printer’s control panel.

            For details on printing the configuration page and using the printer’s
            control panel, refer to the printer’s User’s Guide.




22                                          Starting the Firmware Updater
  If Transferring of the Data Fails
     If transferring of the data fails, the following message appears.
     1   Click the [OK] button.




     2   Check that the printer is ready and that it is correctly connected, and then
         click the [Update again] button.




Starting the Firmware Updater                                                     23
24   Starting the Firmware Updater

								
To top