Bryant Electronic Catalog Commercial Split Systems v4.14 Sales Office by naq52275

VIEWS: 20 PAGES: 2

									April, 2005                        Bryant Electronic Catalog                                            Page 1 of 2
                                 Commercial Split Systems v4.14
                                   Sales Office Release Sheet
                             Bryant Commercial Split Systems v4.14 replaces v4.12
                            Note: This program has been released to sales offices only.

                                        UPDATE DESCRIPTION
This update to Commercial Split Systems program contains the following changes:
•   Performance data for the 576C090 and 576C102 condensing unit combinations were removed. These units have
    been obsolete since 2002 but were kept in the program for distributor inventory selection.
•   Several changes were made to the Performance Summary Report to make the report and information easier to
    understand. For example, the “Compressor Power, kW” line was moved down to the Outdoor unit electrical
    section of the report.
In addition, the following problems were corrected:
•   When selecting accessory electric heating, the software allowed a discharge plenum to also be selected. When
    accessory electric heating is present, the discharge plenum is not allowed.
•   When a 524A090 unit size DX combination was selected and the airflow was below 2500 cfm, incorrect
    electrical values were displayed in the performance report.

                                   INSTALLATION PROCEDURES
Installation via Internet Download
If you already have one of the Commercial Splits versions v4.10 thru v4.12 installed on your computer, you can save
time by using a Patch Update to install the program. This is the first procedure below. Otherwise, a full program
installation will be required. This is the second procedure below.
To perform a patch update install, please use the following procedure:
•   Download the ecatp-cps414.exe file from the Internet site and save it in a folder on your hard disk.
•   Run Windows Explorer and double-click on the ecatp-cps414.exe file. This launches the program installer.
•   Follow the installation instructions which appear on your screen.
To install Commercial Split Systems v4.14, please use the following procedure:
•   Download the ecat-cps414.exe file from the Internet site and save it in a folder on your hard disk.
•   Run Windows Explorer and double-click on the ecat-cps414.exe file. This launches the program installer.
•   Follow the installation instructions which appear on your screen.
•   Note: E-CAT/E20-II Configuration Services v2.14 must be installed prior to installing Commercial Splits.
Running the Program
Use the following procedure to run the program:
•  From the Windows desktop press Start, choose Programs and then choose Bryant Electronic Catalog Programs.
•  In the Bryant Electronic Catalog Programs group click on the Commercial Splits v4.14 item.
Minimum Computer Requirements:
•  Hard Disk Space: 17 megabytes
•  Random Access Memory: At least 32 megabytes
•  Display Monitor: At least VGA with 600x800 resolution and 256 colors.
•  Operating System: Windows 95, 98, ME, 2000, or Windows NT (with service pack 4 or later)
•  E-CAT/E20-II Configuration Services v2.14




                                                                                                  Carrier Software Systems
                                                                                                        Syracuse, NY, USA
                                                                                                           1-800-253-1794
                                                                                          software.systems@carrier.utc.com
April, 2005                        Bryant Electronic Catalog                                        Page 2 of 2
                                 Commercial Split Systems v4.14
                                   Sales Office Release Sheet

                              PREVIOUS VERSION INFORMATION
1. When Commercial Splits v4.14 is installed it will overwrite v4.12. It is not necessary to uninstall v4.12 before
   installing v4.12.
2. Data created with v4.12 is usable with v4.14 immediately; no data conversion procedures are required.


                                       MANUAL INFORMATION
Standard documentation is provided in a fully-featured on-line help system within the Commercial Split Systems
program. To access on-line help use the Help option on Commercial Split Systems program menu bar, or press the
[F1] key for help specific to any input or option in the program.




                                                                                              Carrier Software Systems
                                                                                                    Syracuse, NY, USA
                                                                                                       1-800-253-1794
                                                                                      software.systems@carrier.utc.com

								
To top