Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

Solutions for Common Garage Door Problems

VIEWS: 15 PAGES: 1

You can easily fix some common garage door problems by yourself. Here are a few tips on how to maintain your own garage door when you find a challenge.

More Info
									Solutions for Common Garage Door Problems

Are you experiencing difficulty with your garage door? Repairing minor issues can be quick and easy as
long as you understand the source or you know what the issue is. Also, understanding how the garage
door works and realizing the best way to troubleshoot minor problems can enable you put every thing in
order effortlessly, so as not compromise the safety of your residence. Here are some typical garage door
problems and their fixes:

1. The garage door opens with the remote but won't close:

The receiver’s signal might be weak and needs replacing, or there is an issue power source. Often, all
you need to do is replace the batteries, so be certain to check the batteries first. If the batteries are all
right, slowly move away from the receiver and press the remote control at distinct periods of time. You
may require to change the receiver if you're unable to control your garage door when you distance
yourself from it. Check the sensors too. From time to time, when the infrared sensors malfunction, one
from the sensor lights is blinking. Check for anything that may prevent the sensor beam. It may need re-
alignment or the photo lens needs some cleaning when the trouble is originating from the beams.

2. You close the garage door. Unexpectedly, it stops, reverses, and goes back up:

There are varied assumptions for this problem - look for indications of wear and tear on the springs, like
uneven gaps between coils, broken spring, or excessive put on. Depending on the type of garage door
you have, the extension pulleys might require replacing. Conversely, the roller bearings might need
some lubricant. Double-check the sensors once again if they're blinking. Clean the door’s track and
guarantee that it's properly in place; otherwise, the wheels could be causing the reverse. Loosen the
screws that hold the track and carefully adjust it. Then, tighten the screws back up and see if it happens
again. If this doesn't work, it may need to be changed.

3. Your garage door closes right after hitting the floor:

If your garage door is having a problem in opening and closing correctly, you must look at the limit
switch if it needs adjusting or moving. Nonetheless, be cautious when performing this process yourself
as it needs fundamental mechanical abilities and use of suitable tools. If you are not confident with your
knowledge, then it's suggested that you just hire a qualified specialist to fix this problem for you.
Contact your local service for any issues you have with your garage door Vancouver.

4. The garage door gets stuck:

This is a clear issue of blockage on your door’s path. Again, take a look at the track that raises and lowers
your garage. Is there a foreign object in the way? If there is, remove it and try again. If removing the jam
does not do the trick, you may have several chains that require lubricating.

If none of the solutions provided work, then it's time to ask for support from a qualified specialist,
preferably from a reputable organization so that you're assured of their qualifications and successful
service. While this option will cost you more compared to just performing it yourself, do not risk it or
you might wind up adding more harm to your electric garage door.

								
To top