Programming the Siemens HE40T Bar Code Scanner 1. The following information is used to program the HE40T Siemens Bar Code Scanner. The HE40T (Hawkeye) scanner is a UID compliant scanner. Before programming the scanner, ensure to plug in the 8-pin DIN connection on the bottom of the scanner and then plug the other end of the cable to a USB port on your host computer. To properly program your HE40T scanner to read 1D & 2D data matrix bar codes, scan the following bar codes below: a. The 1st bar code you will scan will be the “USB Keyboard” bar code: b. The 2nd bar code you will scan is the “All 1D On” bar code: c. The 3rd bar code you will scan is the “UII DM On” bar code: d. The 4th bar code you will scan is the “Send & Buffer Mode” bar code. This bar code is used to allow the user to wirelessly scan items during a monthly inventory. e. The 5th bar code you will scan is the “Read with Near Field Imager” bar code: f. The 6th bar code you will scan is the “Suffix-Enter (USB/PS2)” bar code: g. The 7th bar code you will scan is the “Vibrate on/Beep on” bar code: h. The last bar code you will scan is the “Save Settings” bar code: * NOTE: If you want to put your HE40T bar code scanner in wireless mode, the user will unhook the 8 pin DIN connector from the rear of the scanner handle. DO NOT remove the USB plug connector. This feature will allow the user to conduct a monthly inventory and once the 8 pin DIN connector is plugged back in, the scanner will download what was scanned during the inventory.
Pages to are hidden for
"Programming the Siemens HE40T Bar Code Scanner"Please download to view full document