10 ELECTRONICS CORPORATION OF INDIA LIMITED (Govt. of India Enterprise) ECIL Post, Hyderabad - 500 062 Electronics Corporation of India Limited (ECIL), is a leading Public Sector Company in the area of Strategic Electronics with thrust on innovation & indigenization. A technology leader and pioneer, engineers at ECIL have opportunities to work in some of the most exciting national and international projects in Nuclear, Defence, Space, Security, Telecom, IT, Medical and e- governance sectors in the functional areas of Design & Development, Project execution, Engineering, Production, Testing & qualification, Marketing and maintenance. Core competencies include Automation & Control, Power Electronics & drives, SATCOM, DSP, Communication & networks, EW, Microwave & RF engineering, Mechanical & Structural design, Inertial systems & navigation, Hybrids, ASICS, VHDL, FPGA, Sensors, Actuators & Detectors, Embedded electronics, Real-time software etc. ECIL has close collaboration with national R&D laboratories and institutes and has been involved in dream projects such as Chandrayaan-I, LHC etc., pushing technology frontiers. ECIL is looking for dynamic and result- oriented persons for the following positions: Post Name of the Post No. Post qlfn. Age limit as Total Min. No. of Exp. (yrs.) on monthly posts 31.7.2010 emoluments (yrs.) (Excluding perks) Rs. 01 GENERAL MANAGER (EG-IX) (Rs. 1 20 50 84,700/- 51,300-3%%-73,000) 02 SR.DEPUTY GENERAL MANAGER 1 18/15 48/45 (*) 60,430/ 54,320 (EG-VII) /( DEPUTY GENERAL MANAGER (EG-VI) Defence - Business Development) (Rs.36,600- 3°/o-62,000/32,900-3°/o-58,000) 03 DEPUTY GENERAL 2 15 45 54,320/- MANAGER(QA) (EG-VI) (Rs.32,900- 3%%-58,000) 04 SENIOR MANAGER (CC) (EG-V) 1 12 45 48,050/- (Rs.29,100-3%%-54,500) 05 SENIOR MANAGER (MM) (EG-V) 1 12 45 48,050/- (Rs.29,100-3%%-54,500) 06 SENIOR MANAGER (QA/QC) (EG- 1 12 45 48,050/- V) (Rs.29,100-3%%-54,500) 07 TECHNICAL MANAGER (ENGG) 2 10 40 41,110/- (EG-IV) (Rs.24,900-3%%-50,500) 08 TECHNICAL MANAGER (PRODN) 1 10 40 41,110/- (EG-IV) (Rs.24,900-3%%-50,500) 09 TECHNICAL MANAGER (QA/QC) 2 10 40 41,110/- (EG-IV) (Rs.24,900-3%%-50,500) 10 PURCHASE MANAGER (EG-IV) 2 10 40 41,110/- (Rs.24,900-3%%-50,500) 10 11 PURCHASE OFFICER (EG-II) 1 1 30 27,080/- (Rs.16,400-3%%-40,500) 12 TECHNICAL OFFICER (EG-II) 40 3 30 27,080/- (Rs.16,400-3%%-40,500) 13 STATION OFFICER-A (FIRE) (EG-I) 1 (@) Min. 18 20,810/- (Rs.12,600-3%%-32,500) Max. 40 ( * ) Defence service will be excluded from Age (@) Minimum experience of 5 years in a post not below the rank of Sub-Officer in a well established whole time fire services organization is essential. Notwithstanding the above, the candidate must have 3 years relevant experience after obtaining the requisite qualification of Station Officer-A. No experience required for candidates with BE (Fire). Additional increment(s) and/or service weightage will be allowed in deserving cases based on experience/ higher qualification (relevant)/performance in interview. Post Qualification & Experience No. 01 GENERAL MANAGER: A first class Graduate/Post Graduate in Engineering or its equivalent in Electronics and Communication engineering or its equivalent from a reputed University/Institute. Should have excellent domain knowledge of Radios, Radars for various applications, Electronic Warfare Systems, Integrated COMINT and ELINT Systems. Shall be responsible for heading the division leading a group of talented engineers in developing new business as well as responsible for divisional performances. Shall have handled large projects at Project Manager level and at Head of Division level. Shall have a good rapport with DRDO, MoD and be aware of the MoD long range plans, DPP procedures etc. Should possess 20 years post qualification experience in all, of which last 5 years shall be in a senior management positions. Ex-Service Officers with suitable experience can also apply. 02 SENIOR DEPUTY GENERAL MANAGER/DEPUTY GENERAL MANAGER (Defence-Business Development): A First Class Graduate Engineer or a Staff College qualified First Class M.Sc., serving/retired Officer with minimum of 6/2 years service in Colonel Rank. Should have experience of posting at Army Head Quarters. Should be well versed with latest Defence Procurement Procedures and DPM-2009. Should have good insight into current and future requirements of armed forces, to identify future business areas. 03 DEPUTY GENERAL MANAGER (QUALITY ASSURANCE): A First Class Graduate/Post-graduate in Engineering or its equivalent in Electronics & Communication Engineering/Computer Science Engineering from a reputed University/Institute. Should be capable to lead a team to Head, Quality Assurance for Strategic Systems such as Nuclear, Defence etc. Should be fully conversant with Quality Management systems and procedures with experience in implementation. Handling of MSQA projects will be preferred. 04 SENIOR MANAGER (CORPORATE COMMUNICATIONS): A Post Graduate with PG Diploma in Journalism or Master of Journalism. Should have post qualification experience as correspondent/journalist/web correspondent for a reputed magazine/Organization. Shall be responsible for writing technical articles in the in-house magazine as well as print media. The incumbent shall act as an interface between the media and the Corporation. 05 SENIOR MANAGER (MATERIAL MANAGEMENT): A First Class Graduate Engineer or its equivalent with post graduate Diploma in Material Management from a reputed University/Institution. Should have post qualification experience in Materials Management of a large organization of repute dealing with imports / re-exports. Knowledge of implementation and operation of e-procurement and FEMA rules will be preferred. Candidates having MBA with specialization in Materials Management will be preferred. 06 SENIOR MANAGER (QUALITY ASSURANCE / QUALITY CONTROL) : A First Class Graduate /Post graduate in Engineering or its equivalent from a reputed University/ Institute. Should have post qualification experience in Quality Assurance for Systems for strategic applications such as Nuclear, Defence etc. Should have thorough knowledge of Quality management Systems & Procedures and its implementation. Experience in handling projects of MSQA will be preferred. 10 07 TECHNICAL MANAGER (ENGINEERING) : A First Class Graduate Engineer or its equivalent in Mechanical from a reputed University/Institute, with experience in Engineering & Product Development, System Engineering / Electronics Packaging standards, practices, components, materials/CAE, CAD, CAM / familiarity with JSS, MIL, IEC, DIN, ISO standards/thermal, EMC, IP issues/documentation standards. 08 TECHNICAL MANAGER (PRODUCTION) : A First Class Engineering Graduate or its equivalent in Mechanical from a reputed University / Institute with experience in Design analysis of PCBs - Thermal, RF interference. Should possess Knowledge in design & analysis tool for PCB design and have worked on Multi layer Hi-density interconnectivity flexible PCB Boards. 09 TECHNICAL MANAGER (QUALITY ASSURANCE / QUALITY CONTROL) : A First Class Graduate Engineer or its equivalent in Mechanical from a reputed University/ Institute with experience in Standards & QA procedures applicable for Mil and Aerospace, applicable Indian Defence and MIL Standards. Should be conversant with the Quality Management Systems. PURCHASE MANAGER : A First Class Engineering graduate or its equivalent with post graduate Diploma in Materials Management from a reputed University/ Institute with post qualification experience in Materials Management of a large organization of repute dealing with imports / re-exports. Knowledge of implementation and operation of e-procurement and FEMA rules will be preferred. Candidates having MBA with specialization in Materials Management will be preferred. 11 PURCHASE OFFICER: A First Class Engineering graduate or its equivalent with One year Post Graduate Diploma in Materials Management from a reputed University/Institute with post qualification experience in Materials Management of a large organization of repute dealing with imports / re-exports. Knowledge of implementation and operation of e-procurement and FEMA rules will be preferred. Candidates having MBA with specialization in Materials Management will be preferred. 12 TECHNICAL OFFICER: A First Class Graduate/Post-graduate in Engineering or its equivalent from a reputed University/Institute in Electronics/ CSE/Electrical/lnstrumentation/Mechanical /CiviI/Aeronautical. Should have post qualification experience in systems for Defence, Nuclear, Space, Security, Telecommunication, IT or process industry in the areas - design, development, manufacturing, testing. Relevant areas of experience include: Embedded systems, Analog/digital electronics, ASIC, MEMS, VLSI, FPGA, VM, PCI, Control & Instruments & Systems, Networks, Communication, EW System, Power electronics, Drives, High Voltage Systems, Inertial components, systems, DSP, Image processing, High performance computing, Thermal analysis, Machine design, structural analysis & design. Knowledge and working experience of CAD, CAE, EDA, CASE, ANSYS, CATIA, Solid Works, ORACLE, C++, MATLAB, SPICE, MIL/JSS/IEC/IEEE standards, Documentation and engineering tools, cost estimates, supervision of Civil contracts, liaisoning with customers, Planning systems and Simulators for C&I Systems & Missiles, Experience in Radar Data, Processing and application specific in Air Traffic Control. 13 10 STATION OFFICER-A (FIRE): (i) SSC or equivalent + Certificate of Station Officer's Course of the National Fire Service College or from CISF Fire Training Centre (OR) Graduate of the Institute of Fire Engineering, India. (OR) B.E in Fire Engineering. (ii) Having minimum 5 years of experience in a post not below the rank of Sub-Officer in a well established whole time fire service organization is essential. Notwithstanding the above experience, the candidate must have 3 years of relevant experience after obtaining the requisite qualification of Station Officer-A for candidates without B.E (Fire) qualification. (iii) Candidate should possess a valid Heavy Vehicle Driving Licence and be fully conversant with the operation and Maintenance of Fire Engines, Fire Pumps and other Fire Fighting Equipments. Mode of Selection: The Final selection of the candidate will be done on the basis of performance in Physical Endurance Test/Trade Test and interview: a) b) c) d ) e) f) Should be able to run 100 meters in 30 seconds. Should be able to lay 4 lengths of hoses each 50 ft. from the appliance within 3 minutes. Should be able to climb on extension ladder of 35 ft. length and come down, twice in 2 minutes. Should be able to carry a person of approximately his own weight by the Fireman's lift method over 25 meters in 3 minutes. Should be able to "pushups" 20 times continuously. Should be able to run 1 mile in 10 minutes. Physical Standards No deformity Height 165 cms. (minimum) Weight 50 kgs (minimum) Chest 81 cms. (Normal) 86 cms. (Expansion) Vision 6/6 without wearing glasses or any other aid. Night or colour blindness shall be a disqualification. Should be able to conduct Physical training, Squad drills, Fire fighting drills, Fire fighting/Trailor operations, driving test, operation of fire tenders and generation of foam using foam tenders Experience in Nuclear, Defence, Aerospace Institutions / Industry will be an added advantage. Coverage under PF & Gratuity schemes; LTC, Medical benefits, Leave Rules etc., would be allowed, as per rules of the Corporation. Placement will be anywhere in India. RESERVATIONS: 10 Post Nos. No.of posts Reserved for 01 01 UR 02 to 03 03 2-UR & 1-OBC 04 to 10 10 5-UR; 3-OBC; 1-SC & 1-ST 11 to 13 42 21- UR, 15-OBC, 03-SC & 03- ST The reservation includes two posts for Persons with Disabilities (One each for Orthopedically Handicapped and Hearing Handicapped), which may be from any category of candidates selected. RELAXATIONS: Qualification: First Class with minimum 60% marks is relaxed to Second Class with minimum 50% marks in aggregate for SC/ST candidates. Age: The upper age limit is relaxed by 5 years for SC/ST, 3 years for OBC (Non-Creamy Layer) candidates. Age relaxation for Persons with Disabilities (degree of disability 40% or above) is 5 years for candidates belonging to General; 8 years for OBC and 10 years for SC/ST categories. Upper age limit is further relaxed by 5 years for the candidates who had ordinarily been domiciled in the state of Jammu & Kashmir from 01.01.80 to 31.12.89. Fee exemption: Candidates belong to SC/ST/PH & Serving/Retired Service Officers from Defence are exempted from payment of application fee. Experience: Relaxation in experience will be allowed for SC/ST candidates as detailed below: Period of experience asked for Period of Relaxation allowed for 3 to 5 years 1 year 10 years and above 3 years GENERAL CONDITIONS: Application Fee for General/OBC candidates is Rs. 200/- (non-refundable) for all posts. Candidates belonging to SC / ST / PWD/ Serving/Retired Service Officers from Defence are exempted. Candidates claiming to belong to any particular category of SC / ST / OBC / PWD shall necessarily submit a copy of certificate, as prescribed by Govt. of India, as the case may be, from a competent authority. Candidates belong to OBC category but coming in the "creamy layer" are not entitled to apply against OBC (Non-creamy layer) category. The Management reserves right to limit the number of candidates to be called for interview, as also to fill the posts even at lower level. Before applying, the candidate should read the complete advertisement carefully and ensure that he / she fulfill the eligibility criteria mentioned in the advertisement in all respects. All qualifications should be from a recognized Indian University / Institute recognized by AICTE / Appropriate Statutory Authority. The candidates working in Govt. Departments /PSUs should route their application through proper channel or 'No Objection Certificate' should be produced at the time of interview invariably. No manual / paper application will be entertained. TA (to & fro rail fare) will be paid to the outstation candidates appearing for interview by the shortest route to Hyderabad and back [i.e., from the address for correspondence (within India) mentioned in the Application form], subject to production of documentary proof, as per rules. 10 The application is liable for rejection at any stage of recruitment process in case of furnishing false information, without enclosing necessary documents including Pay-in-slip (if applicable), un-signed application & received after closing date. For queries candidates may visit the link and consult the Frequently Asked Questions (FAQ) section. The candidate has to quote his/her system generated application number allotted for all future correspondence. All future correspondence would be through E-mail ID furnished by the applicant in the on-line application-form or by post. ECIL reserves the right to cancel / restrict / enlarge/ modify the recruitment process, if need so arises, without assigning any reason. Any Legal proceeding in respect of any matter / claim or dispute arising out of this advertisement and / or any application in response thereto can be instituted only in jurisdiction limited to Courts at Ranga Reddy District, Andhra Pradesh. ECIL will be not responsible for any postal delay / loss in transit in submission of documents within specified time. In case any ambiguity/dispute arises on account of interpretation in version other than English, English version will prevail. Canvassing in any form will be a disqualification. Only Indian Nationals need apply. HOW TO APPLY: Eligible candidates have to apply 'ON-LINE' through our website "http://www.ECIL.co.in" and select 'Careers' and click on the "Jobs.ecil.co.in" link. You can alternatively use "https://jobs. ECIL.co.in" for getting connected to advertisement details. The on-line application will be operational from 24.08.2010 (1300 hrs.) to 07.09.2010 (2400 hrs.). State Bank of India has been authorized to collect the Application fee on behalf of ECIL, in a specially opened account Number 31102144119 available on website from 24.08.2010. Candidate has to download and print the pay-in-slip and approach the nearby SBI branch for remitting the application fee of Rs.200/- (Rupees Two Hundred only). The pay-in-slip printed from the portal should only be used for depositing the fee for proper crediting of amount in the allocated account. On receipt of the money, the Bank will allot a Journal Number, Branch Name and Branch Code, after collecting said money. This journal number, Branch Name and branch code are to be filled up by the candidate while applying online. In case, the candidate deposits the fee in a wrong account, ECIL will not be responsible. There will not be any other mode of receipt of application fee. The candidate can take a print out of the blank application proforma provided as a link on the main page, fill up the required information (in Capital letters) as per proforma along with the application fee details and apply through on-line so that the data furnished is error-free. After applying on-line, the candidate is required to take the print out of registered on-line application form with system generated application serial number. Please note down your application serial number for the post applied, for future reference. The candidate can take re- print of his/her registered on-line application form before the last date for On-line registration. Write the system generated on-line application serial number on the ECIL copy of the Pay-in-slip form. 10 The candidate has to sign on print-out of on-line registered application form by affixing the colour passport size photograph (4 X 3 cms) and enclose the photo copies of educational qualifications, experience, caste & Medical Certificate (applicable for PH candidates only) along with EClL's copy of Pay-in-slip invariably. The candidate can retain a copy of the registered on- line application form and candidate's copy of Pay-in-slip of application fee for future reference. The candidate should write advertisement Number 9/2010, Post No. and system generated Application Number on the top of the envelope and send the same to: Senior Deputy General Manager (Recruitment), Personnel Group, ECIL ECIL (Post), Hyderabad - 500 062, Andhra Pradesh. Please note that the registered on-line application form along with all the enclosures (hard copy) as indicated at Sl No.5 above, should reach ECIL on or before 14.09.2010 invariably. The application (hard copy) received after this date will not be entertained. If the candidate is eligible to apply for more than one post, remit the fee for each application, apply on on-line separately for each post and send the registered application form with all enclosures by post separately. The application is liable for rejection at any stage of the recruitment process, in case of furnishing false information / without enclosing necessary documents, including pay-in-slip / unsigned application. The candidate has to quote advertisement number, post name and On-line system generated IMPORTANT DATES: a. Commencement of on-line Registration of application by 24.08.2010 candidates 1300 Hours b. Last date for on-line registration of 07.09.2010 application by candidates 2400 Hours c. Last date of accepting registration forms (Hard copy) with 14.09.2010 required documents by post from candidates 1600 hrs. d. Interview date Will be communicated by mail/ post to eligible candidates only.