The Elmo is the go-between

Document Sample
The Elmo is the go-between Powered By Docstoc
					The Elmo is the go-between

                                         RGB In
                                         to view
              Lamp Switch                computer
               Input Switch

              Power Switch
                                          Main to
                                          view Elmo


You can leave the projector and computer hooked
up to the Elmo and go back and forth between the 2
with the flick of a switch.
   Connect the Elmo to the Dell Projector

1. Connect one end of the VGA cable
   (black cord with 2 blue ends) to the
   Monitor In port on the Projector.
2. Connect the other end of the VGA cable
    to the Elmo in the RGB Output port.
 Connect the Elmo to a Multimedia Laptop

1. Connect one end of the VGA cord to the
   back of the laptop (or computer).
2. Connect the other end of the VGA cord to
  the RGB Input port of the Elmo.
This cord should be connected to the
        laptop or computer.
This cord should be connected to the
             Projector.
• Switch the power on for the Projector.
• Turn on the power switch on the Elmo.
   The Elmo needs to remain on the entire
     time.
Connect the yellow composite cable and the red and white audio
cables from your Projector case to the back of the DVD/VCR.
                                              Connect the other end
                                              of the red and white
Connect the other end of the                  audio cables here.
yellow composite cable here.




                 Cable that is connected to
                 speakers in the cart.