SELECTOR GUIDE FOR HEATING ELEMENTS
Product Name Application Pigment Sheet resistance
(Ω/square/25µm)
Theoretical Coverage (m²/kg at 10 µm)
ca. 15 ca. 12
Typical Cure
Electrodag® PF-410 Electrodag® 6017 SS
Silver ink for flexible substrates Carbon ink for flexible substrates, can be mixed with Electrodag® PM-404 Non-conductive ink for flexible substrates, can be mixed with Electrodag® 6017 SS Silver ink for rigid substrates Resistor ink for rigid substrates Resistor ink for rigid substrates Resistor ink for rigid substrates Resistor ink for rigid substrates Resistor ink for rigid substrates Resistor ink for rigid substrates
Silver Carbon
< 0.025 ca. 35
120°C, 15 min. 120°C, 15 min.
Electrodag® PM-404
Non-conductive
n.a.
ca. 14
120°C, 15 min.
Minico® M 4100 Minico® M 2001 RS Minico® M 2010 RS Mod2 Minico® M 2012 RS Mod2 Minico® M 2013 RS Mod2 Minico® M 2014 RS Mod2 Minico® M 2015 RS Mod2
Silver Carbon/Silver Carbon/Silver Carbon Carbon Carbon Carbon
< 0.040 ca. 1 ca. 10 ca. 100 ca. 1000 ca. 10.000 ca. 100.000
ca. 14 ca. 20 ca. 25 ca. 38 ca. 38 ca. 38 ca. 38
200°C, 20 min. 200°C, 30 min. 200°C, 30 min. 200°C, 30 min. 200°C, 30 min. 200°C, 30 min. 200°C, 30 min.
∗
For additional information on drying/curing cycles please consult Product Data Sheet and Application Sheets. These figures are given only as a guide.
For further information please contact:
Acheson Industries (Europe) Ltd.
c/o Postbox 1 9679 ZG SCHEEMDA The Netherlands Tel.: +31 (0)597 670502 Fax.: +31 (0)597 670595 e-mail: emsales-acheson.nl@nstarch.com
GB 03.03 – Sel. Guide Heating Elements