Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

sun heater

VIEWS: 62 PAGES: 3

									                                                                          Hi-Temp Strip Heaters
                                                                                      Type SUN (3 " wide)
APPLICATIONS
The SUN strip heater is designed for rugged duty
at high temperatures (1400°F maximum sheath
temperature) where moisture resistant
construction is desired, or where the preferred
power is 480 Volt. The SUN heater may be used
to heat platens, dies, molds, tanks, kettles, and
many other surfaces.




STANDARD FEATURES                                                OTHER OPTIONS
Incoloy sheath tubular is tightly pressed against                -B15       Terminals bent up at 15° angle
a heavy stainless steel plate and completely
enclosed in a stainless steel shroud. Holes are                  -B45       Terminals bent up at 45° angle
provided for field mounting on 3/8 inch diameter                 -B90       Terminals bent up at 90° angle
studs assuring good heat transfer to the                                    Terminals bent up at 180° angle
                                                                  -B180
process. Mounting holes are on seven (7) inch
centers.                                                         -BXxx      Terminals bent up (or down) at a non-
                                                                            standard angle
ENCLOSURE OPTIONS                                                -J(-K)     Integrally mounted ungrounded
                                                                            sensing thermocouple
-GP       General Purpose Enclosure
                                                                 -Xcsc      Assembly is bent to a specified cross-
-LT       Moisture Resistant Enclosure
                                                                            section radius. Minimum cross-section
-ER       Explosion Resistant Enclosure                                     radius is 4-1/4 inches.

Note: Dim "D" is length (inches) from each heater end to centerline of first hole.

11/19/2001                                                                                            Page 1 of 3
GAUMER COMPANY, INC. · 13616 Hempstead Road · Houston · Texas · 77040 · Ph: 713.460.5200
Ph: 800.460.5200 · Fx: 713.460.1444 · Fx: 800.460.5700 · www.gaumer.com · sales@gaumer.com
                                                                       Hi-Temp Strip Heaters
                                                                                         Type SUN (3 " )
   Catalog        Sheath      Total       Watts       Volts    W/sq.in W/sq.in No.Mtg.    Dim"D"       Weight
   Number         Length      Length                            1Side   Total   Holes     SeeNote

  SUN14M1             11        15.5       750        120         23         11      2       2            3
  SUN14M2             11        15.5       750        240         23         11      2       2            3
  SUN14M4             11        15.5       750        480         23         11      2       2            3
  SUN14H2             11        15.5       375        120         12          6      2       2            3
  SUN14H4             11        15.5       375        240         12          6      2       2            3
  SUN19M1             16        20.5      1000        120         23         11      3       1            3
  SUN19M2             16        20.5      1000        240         23         11      3       1            3
  SUN19M4             16        20.5      1000        480         23         11      3       1            3
  SUN19B2             16        20.5       670        120         15          7      3       1            3
  SUN19B4             16        20.5       670        240         15          7      3       1            3
  SUN19H2             16        20.5       500        120         12          6      3       1            3
  SUN19H4             16        20.5       500        240         12          6      3       1            3
  SUN21M1             18        22.5      1250        120         23         11      3       2            4
  SUN21M2             18        22.5      1250        240         23         11      3       2            4
  SUN21M4             18        22.5      1250        480         23         11      3       2            4
  SUN21B2             18        22.5       800        120         15          7      3       2            4
  SUN21B4             18        22.5       800        240         15          7      3       2            4
  SUN21H2             18        22.5       625        120         12          6      3       2            4
  SUN21H4             18        22.5       625        240         12          6      3       2            4
  SUN25M1             23        27.5      1500        120         23         11      4       1            5
  SUN25M2             23        27.5      1500        240         23         11      4       1            5
  SUN25M4             23        27.5      1500        480         23         11      4       1            5
  SUN25B2             23        27.5      1000        120         15          7      4       1            5
  SUN25B4             23        27.5      1000        240         15          7      4       1            5
  SUN25H2             23        27.5       750        120         12          6      4       1            5
  SUN25H4             23        27.5       750        240         12          6      4       1            5
  SUN34M1             31        35.5      2000        120         23         11      5     1-1/2          6
  SUN34M2             31        35.5      2000        240         23         11      5     1-1/2          6
  SUN34M4             31        35.5      2000        480         23         11      5     1-1/2          6
  SUN34B2             31        35.5      1250        120         15          7      5     1-1/2          6
  SUN34B4             31        35.5      1250        240         15          7      5     1-1/2          6
  SUN34H2             31        35.5      1000        120         12          6      5     1-1/2          6
  SUN34H4             31        35.5      1000        240         12          6      5     1-1/2          6
  SUN41M2             38        42.5      2500        240         23         11      6     1-1/2          7
  SUN41M4             38        42.5      2500        480         23         11      6     1-1/2          7
  SUN41H2             38        42.5      1250        120         12          6      6     1-1/2          7
  SUN41H4             38        42.5      1250        240         12          6      6     1-1/2          7
  SUN43B2             40        44.5      1700        120         15          7      6     2-1/2          8
  SUN43B4             40        44.5      1700        240         15          7      6     2-1/2          8
  SUN49M2             46        51.5      3000        240         23         11      7       2            9
  SUN49M4             46        51.5      3000        480         23         11      7       2            9
  SUN49H2             46        51.5      1500        120         12          6      7       2            9
  SUN49H4             46        51.5      1500        240         12          6      7       2            9
  SUN52M2             47        53.5      3300        240         23         11      7     2-1/2          9
  SUN52M4             47        53.5      3300        480         23         11      7     2-1/2          9
  SUN52B2             49        53.5      2100        120         15          7      7     2-1/2          9
  SUN52B4             49        53.5      2100        240         15          7      7     2-1/2          9
  SUN61B4             56        62.5      2500        240         15          7      8     3-1/2         10
Note: Dim "D" is length (inches) from each heater end to centerline of first hole.

11/19/2001                                                                                         Page 2 of 3
GAUMER COMPANY, INC. · 13616 Hempstead Road · Houston · Texas · 77040 · Ph: 713.460.5200
Ph: 800.460.5200 · Fx: 713.460.1444 · Fx: 800.460.5700 · www.gaumer.com · sales@gaumer.com
                                                                       Hi-Temp Strip Heaters
                                                                                          Type SUN (3 " )
   Catalog        Sheath      Total       Watts       Volts    W/sq.in W/sq.in No.Mtg.     Dim"D"       Weight
   Number         Length      Length                            1Side   Total   Holes      SeeNote

  SUN65M2             60       66.5       4200        240         23         11       9       2           11
  SUN65M4             60       66.5       4200        480         23         11       9       2           11
  SUN65H4             60       66.5       2100        240         12          6       9       2           11
  SUN78M2             73       79.5       5000        240         23         11      11     1-1/2         13
  SUN78M4             73       79.5       5000        480         23         11      11     1-1/2         13
  SUN78H4             73       79.5       2800        240         12          6      11     1-1/2         13
  SUN88M4             84       99.5       5600        480         23         11      12     3-1/2         17
   SUN88B4            84       99.5       3700        240         15          7      12     3-1/2         17
  SUN88H4             84       99.5       3120        240         12          6      12     3-1/2         17
  SUN100M4            95       101.5      6300        480         23         11      14       2           17
  SUN100B4            95       101.5      4200        240         15          7      14       2           17
  SUN100H4            95       101.5      3470        240         12          6      14       2           17




Note: Dim "D" is length (inches) from each heater end to centerline of first hole.

11/19/2001                                                                                          Page 3 of 3
GAUMER COMPANY, INC. · 13616 Hempstead Road · Houston · Texas · 77040 · Ph: 713.460.5200
Ph: 800.460.5200 · Fx: 713.460.1444 · Fx: 800.460.5700 · www.gaumer.com · sales@gaumer.com

								
To top