Docstoc

Tractor Oils - necoleshannon.com

Document Sample
Tractor Oils - necoleshannon.com Powered By Docstoc
					                   Agricultural Product Specifications



                            Agricultural Products
These oils are formulated with base stocks and additives to
specifically meet the needs of agriculture, farm and construction
equipment. These lubricants must perform in the most rugged
and extreme conditions found in the field or off-road in
equipment that maybe used everyday, seasonally or once a year.
They are the life-blood of your equipment and are designed to
protect your investment and deliver the maximum amount of
horsepower to meet specific applications such as crankcase,
gearbox, power take-off, hydraulics, transmission, hydrostatic
transmissions, wet brakes, wet clutches, steering gears and
joints, u-joints, hitch couplings, etc.


          COTTON PICKER SPINDLE CLEANER
COTTON PICKER SPINDLE CLEANER is a water-soluble oil-based liquid that
will mix with water of any hardness. To produce proper emulsion, mix according
to directions provided. It is non-flammable when mixed with water. Correct use of
this product will clean dirt, plant materials and other foreign contaminants from
the spindles. Cleaner spindles mean reduced wrapping and staining, which in
turn means a superior yield of cleaner cotton.

DIRECTIONS:
1. Clean moistener system of wetting agents and cleaners and fill moistener tank
1/2 full of water. (Water and cleaner will not mix if cleaner is poured into
empty tank first and water is added later.)
2. Agitate the water by operating the moistener control water system. This will re-
   circulate the water back to the supply tank.
3. While the water is agitating, slowly add the spindle cleaner to the water at the
ratio of one gallon to 70 gallons of water.
4. Finish filling with water while agitating. After tank is filled, allow agitation to
   continue for about five minutes.

NOTE:
For best results the mixture should be used within 24 hours. If mixture is allowed
to stand for extended time, agitate for several minutes before picking. Additional
cleaner can be added for make-up in a tank already containing some previous
mixture. If tank is less than half full, then fill with plain water until half full. Follow
mixing directions and add cleaner at the correct ratio for the amount of water
being added for make-up.

STORAGE:
Drums and pails of spindle cleaner concentrate should be stored to avoid
possible contamination with water. If water gets into drum or pail, it will cause
curdling. If it is necessary to store outdoors, place drums on sides with bungs in
horizontal position.
           TYPICAL ANALYSIS


           PRODUCT NO.                                             627
           Viscosity @ 40C, cSt                                      11
           Viscosity @ 100C, cSt                                      2.8
           Viscosity @ 100F, SUS                                     64
           Viscosity @ 210F, SUS                                     35
           Viscosity Index                                           86
           Flash Point, F                                          360
           Pour Point, F                                               0
           API Gravity                                               34.5
           Color ASTM                                                 0.5




            COTTON PICKER SPINDLE GREASE
COTTON PICKER SPINDLE GREASE is a superior lithium-based lubricant that
meets or exceeds the performance requirements of John Deere 380, 360 and
305 specifications as well as Case International B-27. This product contains
wear, rust and oxidation inhibitors as are required by picker manufactures.
            TYPICAL ANALYSIS


           PRODUCT CODE                          904
           NLGI Grade                            00
           Viscosity @ 40C, cSt                  N/A
           Viscosity @ 100C, cSt                 N/A
           Viscosity @ 100F, SUS                 115
           Viscosity @ 210F, SUS                  40
          Penetration Worked                415
          Dropping Point, F                 N/A
          Color Visual                      Green
          Texture                           Smooth, Slight Fiber
          Soap Type                         Lithium 12-Hydroxy




  CROWN ROYAL MOLY-GRAPHITE EP GREASE

CROWN ROYAL MOLY-GRAPHITE EP GREASE is a multi-purpose type
grease developed to exceed the latest equipment requirements -- along with
superior performance.

CROWN ROYAL MOLY-GRAPHITE EP contains molybdenum disulfide and
graphite. This grease will not plate out forming an adhering film on metallic
surfaces, reducing the coefficient of friction.

This product has excellent water resistance as well as outstanding temperature
operating ranges. The molybdenum disulfide graphite will act as a dry lubricant
when necessary.

Advantages Include:
 Excellent protection; High temperature +525 F Drop Point
 Good load carrying ability;
 Excellent retention under shock loading conditions; and
 Resistance to water

Applications - Automotive, industrial, fleet trucks and contractor service.

The characteristics (excellent in nature) are especially valuable in heavy-duty
applications where sliding or oscillating motion is present as in bearings, steering
linkage and fifth wheel assemblies.

Meets NLGI Service Classification LB-GC for chassis and wheel bearing greases
as outlined in ASTM D 4950.
           TYPICAL ANALYSIS


          PRODUCT CODE                                  910
          NLGI Grade                                       2
          Viscosity @ 40C, cSt                         145
          Viscosity @ 100C, cSt                         13
          Viscosity @ 100F, SUS                        800
          Viscosity @ 100F, SUS                         70
          Penetration Worked                           280
          Dropping Point, F                            550
          Color Visual                                 Black
          Texture                                      Smooth-Tacky
          Timken OK, lbs                                60
          4-Ball EP Weld                               400
          Load Wear Index                               65
                                                       Lithium-
          Soap Type
                                                       Complex
          Soap %                                       7-11
          Wheel Bearing Leakage, ASTM D4290, g
                                                         2
          loss


                     DIESEL SUPREME PLUS
DIESEL SUPREME PLUS Monograde Oils (10, 20, 30, 40, and 50) contain the
same high quality base stocks and performance additive found in the multi-
weight oils. The SAE 10 may be used where a API-CF oil is recommended while
the SAE 20 can be used for the CF/SJ service. The SAE 30, 40 and 50 grades
meet the requirements of the medium and heavy-duty diesel as well as the two
stroke engines. They are suited for the applications where high performance API
CF-2, CF, CE, CD-II, CD, SG and SH (except 10W) or SJ service is required.
They may be used is some LPG, CNG and alternate fuel engine applications.

DIESEL SUPREME PLUS is suitable for use in both gasoline and diesel service
making them applicable to mixed fleets in on-and-off road use. Specific viscosity
grades are approved for use in power-shift, manual and hydrostatic
transmissions, final drives and hydraulic systems where the use of a heavy-duty
detergent type of engine oil is recommended.

ADVANTAGES AND BENEFITS:
 Controls low temperature sludge deposits for cleaner engines
 Reduces ring sticking and wear by controlling the formation of high
temperature
  varnish
 Minimizes valve and combustion chamber deposits
 Provides protection against the formation of acids caused by oxidation or fuel
 Protects against corrosion and rust
 Lessens formation of PCV valve deposits in gasoline engines
 Contains anti-wear agents to enhance engine life
APPLICATIONS/SPECIFICATIONS:
 Allison C-4 (SAE 10, 30 and 50)
 Caterpillar Transmission TO-2
 Mack ( EO-K, EO-K/2)
 MIL-L-2104G (SAE 10, 30, 40)
 MIL-L-46152 (SAE 30)

Consult your owner's manual for the proper viscosity grade to use in the following
engines:

Caterpillar       Fiat-Allis            Isuzu            Kubota                 Mitsubishi
Cummins           Ford                  Case             Mack                   Navistar
Detroit Diesel    GMC                   John Deere       M.A.N.                 Scania
Deutz             International         Komatsu          Mercedes Benz          Volvo


 TYPICAL ANALYSIS


PRODUCT NO.                    101              102       103      104             105
SAE GRADE                         10            20        30        40              50
Viscosity @ 40C, cSt              36.9           64.3      99       141             200
Viscosity @ 100C, cSt              6.4            8.6      11.4      14.8               18.7
Viscosity @ 100F, SUS          191              331       516      740            1050
Viscosity @ 210F, SUS             48             56        65       79               94
Viscosity Index                126              114       106      103              101
Flash Point, F                 385              415       430      450              460
Pour Point, F                     -22           -20        -0            5           10
Gravity, API                      29.5           28.5      27.5     27.0             26.5
Pounds Per Gallon                  7.33           7.38      7.42         7.47            7.52
Sulfated Ash, %                    1.2            1.2       1.2          1.2             1.2
Base Number, D2896                10             10        10       10               10
Color ASTM                         5.5            5.5       6.0          6.0             6.5
API Service                    CF/SJ           CF/SJ     CF-4/SJ CF-2/SJ CF-2/SJ


                      DIESEL SUPREME PLUS
DIESEL SUPREME PLUS Multigrade Oils have been reformulated to meet the
stringent requirements of today's engines. It is a premium quality heavy-duty
engine oil that is suitable for use in both diesel and gasoline engines. DIESEL
SUPREME PLUS 15W40 meets and/or exceeds the performance requirements
of API CI-4/SL, CH-4, CG-4, CF-4, CF and SJ. In addition, it exceeds the Allison
C-4, MIL-L-2104F, MIL-L-2104G as well as the older API classifications CE, CD-
II, SH, MIL-L-46152E, Mack EO-K/2, EO-L and EO-L Plus.

The same premium oil is available in an SAE 10W30 grade for better low
temperature performance in colder climates, better fuel economy compared to
the SAE 15W40 and to meet the demands of the OEM's (CG-4, CF-4, CF and
SJ) who recommend lower viscosity grades.

DIESEL SUPREME PLUS 20W50 contains the same high quality base stocks
and performance additives found in the CH-4 approved product. It can be used
for both gasoline and diesel engine service requiring a CF-4, CF, SH or SJ oil.
The SAE 20W50 is an excellent choice for high temperature and heavy loads.

ADVANTAGES AND BENEFITS:
 Meets the needs of today's high-performance, fuel efficient, low emission
diesel
   and gasoline engines.
 Better cold flow properties for easier starting in colder weather.
 Enhanced oxidation stability, valve train wear and deposit control.
 Extended oil drain capability (oil analysis recommended).
 Overall increased engine protection.
 More effectual shear stability for better viscosity control
APPLICATIONS/SPECIFICATIONS:
 General Motors-Allison C-4
 Allis Chalmers
 J.I. Case
 Caterpillar
 Cummins 27006 (10W30, 15W40)
 John Deere
 JCB
 Deutz
 Volvo VDS (15W40)
 Mack E0-M, EO-M Plus (15W40)
 Navistar International
 Kubota
 Komatsu
 Mercedes 228.1
 ACEA E2/B3/A2
 Detroit Diesel (15W40 in Series 40,50,55,60 and all other four stroke engines)
   TYPICAL ANALYSIS


  PRODUCT NUMBER                       106            108          109
  SAE GRADE                            10W30          15W40        20W50
  Viscosity @ 40C, cSt                  69            115          171
  Viscosity @ 100C, cSt                 10.2           14.8          18.5
  SUS @ 100F                           353            591          890
  SUS @ 210F                            61             79          950
  Viscosity Index                      135            135          125
  Flash Point, F                       420            420          450
  Pour Point, F                        -30            -25           -22
  Gravity, API                          29.3           28.5          27.7
  Pounds per Gallon                      7.32           7.34          7.37
  Ash Content, % Weight                  1.2            1.2           1.2
  Base Number, D2896                    10             10            10
  Color ASTM                             5.5            5.5           5.5
  API Service                          CH-4/SJ        CH-4/SL      CH-4/SJ



                  ENVIROGUARD GREASE EP #2
ENVIROGUARD GREASE EP #2 is designed to give superior performance with
the added advantage of being readily biodegradable by being manufactured
totally with plant based oil. It is designed to have good compatibility with other
multi-purpose greases and exhibits excellent water resistance.

ENVIROGUARD GREASE EP #2 grease is an ideal product in applications
where conventional mineral oil-based greases maybe a concern. It is ideal for
marine, wastewater treatment facilities, inland waterways, farm, and construction
applications. In addition to being “readily biodegradable” the plant based base
oils utilized have low or no toxicity as well as the added environmental value of
being produced with base oils from renewable agricultural resources.
          TYPICAL ANALYSIS


          PRODUCT CODE                       937
          NLGI Grade                            2
          Viscosity @ 40C, cSt                 55.1
          Viscosity @ 100C, cSt             10.8
          Viscosity @ 100F, SUS            278
          Viscosity @ 210F, SUS             63
          Penetration Worked               280
          Dropping Point, F                450
          Color Visual                     Green
          Texture                          Smooth
          Timken OK, lbs.                   40
          4-Ball EP Weld & LWI             500
          Soap Type                        Aluminum Complex
          Soap, %                          10 - 12




 ENVIROGUARD TRACTOR HYDRAULIC FLUID
 ENVIROGUARD TRACTOR HYDRAULIC FLUID is specially formulated with
 high quality biodegradable base oils to meet the need for an environmentally
                               friendly product.

ENVIROGUARD TRACTOR HYDRAULIC FLUID is designed as a "one fluid" for
use in farm tractor hydraulic systems, transmissions, differentials and wet brake
 systems. ENVIROGUARD TRACTOR HYDRAULIC FLUID remains fluid down
  to -40F, yet because of its wide temperature range performance, it maintains
    required viscosity at higher temperatures and with its exceptional antiwear
        protection, can be used in heavily loaded farm tractor differentials.

ENVIROGUARD TRACTOR HYDRAULIC FLUID is recommended for use in all
               types of farm and industrial tractors.

          TYPICAL ANALYSIS


          PRODUCT NO.                                     843
          Viscosity @ 40C, cSt                              43.6
          Viscosity @ 100C, cSt                              9.4
          Viscosity @ 100F, SUS                           219.5
          Viscosity @ 210F, SUS                             57.5
          Viscosity Index                                 195
          Flash Point, C                                  600
          Pour Point, C                                         -15
          API Gravity                                           21.5




        HD MULTI-PURPOSE GEAR OIL EP GL-4
HD MULTI-PURPOSE GEAR OIL EP GL-4 is a multi-purpose type gear
lubricant, which uses a sulfur-phosphorus additive treatment. The additives
provide extreme pressure properties. This Gear Oil is designed to protect critical
automobile gears. The additives also supply anti-scuff and anti-wear properties to
these gear oils. API Service Classifications: GL-4 also GL-3 & GL-2

HD MULTI-PURPOSE GEAR OIL EP GL-4 is blended to meet the multi-grade
viscosity requirements described in the SAE J306a recommended practice. This
oil is formulated with naturally high VI viscosity index improvers to meet the multi-
grade viscometric properties of the grade offered. Because this lubricant does
not contain VI improvers, it will maintain viscometric properties throughout its
useful life and will not lose viscosity through shear.

HD MULTI-PURPOSE GEAR OIL EP GL-4 is available in two viscosity grades
(SAE 90 and 140) for use at ambient temperatures down to -15 F. Equipment
manufacturers' recommendations should be followed when the gear lubricant is
subject to high ambient temperatures.

APPLICATIONS:
HD MULTI-PURPOSE GEAR OIL EP GL-4 may be used where the equipment
manufacturer recommends a product at the lower performance level of former
Military Specifications MIL-L-2105.

This gear oil is recommended for conventional (manual) transmissions,
differentials, final drives and other gear cases of trucks, buses, cars, farm
tractors and earth moving equipment where extreme pressure, hypoid or multi-
purpose gear oils of GL-4 performance level are required.
  TYPICAL ANALYSIS


  PRODUCT NO.                                       284B               286D
  SAE GRADE                                         90                 140
  Viscosity @ 40C, cSt                               229                450
  Viscosity @ 100C, cSt                                  19.1            30
  Viscosity @ 100F, SUS                             1214               2412
  Viscosity @ 210F, SUS                                  97.5           142
 Viscosity Index                                     95              95
 Flash Point, F                                     500             555
 Pour Point, F                                         0             10
 Gravity, API                                        28.5            26.5




       HIGH TEMPERATURE WHEEL BEARING
                   GREASE
HIGH TEMPERATURE WHEEL BEARING GREASE is a tremendous product:
The appearance is smooth, adhesive, slightly stringy and amber in color. This
new grease is Lithium complex and is formulated for operations from a 0 degrees
Fahrenheit, but with a dropping point of 525 degrees Fahrenheit! This grease is a
slightly heavier version of the popular ROYAL 98 GREASE and is designed for
better adherence to wheel bearings in trucking and off-highway applications.

QUALITIES:
 MECHANICAL STABILITY - HIGH TEMPERATURE WHEEL BEARING
GREASE resists thinning or hardening in bearings, thereby minimizing
leakage and
   maintaining extended long life service!
 OXIDATION AND CORROSION PROTECTION - The high level of additive
   treatment minimizes chemical deterioration over extended periods of storage
and
   service. Protects steel and copper alloy bearing against rust and corrosion.
 EXTREME PRESSURE PROTECTION - The EP additives provide effective
wear protection for ball joints, drive shafts and other parts subjected to high
pressure and shock loading.
 FORMULATION - Fully refined lube stocks and additives under rigid laboratory
and process control. Special compounding supplies beneficial anti-friction
properties.
 TEMPERATURE STABILITY - This products offers excellent low temperature
   pumpability and high temperature protection.
  WATER RESISTANCE - It effectively resists washout and excessive dilution
                                  by
                water, assuring all-weather lubrication.

                                APPLICATIONS:
   HIGH TEMPERATURE WHEEL BEARING GREASE is recommended for
    extended service in heavy-duty automotive, trucks, buses, farm tractors,
  construction equipment, high temp wheel bearings (Disc Brakes), roller & ball
 bearings, electric motor bearings, throw-out bearings, universal joints, chassis,
                                 fifth wheel, etc.

Meets NLGI Service Classification LB-GC for chassis and wheel bearing greases
                        as outlined in ASTM D 4950.
          TYPICAL ANALYSIS


         Product Number                      938
         Viscosity @ 40C, cSt                144
         Viscosity @ 100C, cSt                 11
         Viscosity @ 100F, SUS               775
         Viscosity @ 210F, SUS                 65
         Soap Type                           Lithium Complex
         Soap, %                             10 -12
         Dropping Point, F                   525
         Timken OK, lbs                        60
         4Ball EP Weld & LWI                 315/50
         Texture                             Smooth and Tacky
         Color Visual                        Amber




                        HYDROSTATIC FLUID
HYDROSTATIC FLUID is an automatic transmission fluid designed specifically
for use in transmissions that require a Type F or M2C33-F transmission fluid.
This includes most pre-1980 Ford automatic transmissions and many import car
manufacturers' models requiring such fluid. It is recommended for John Deere
hydrostatic systems specifying J21 A fluid.


         TYPICAL ANALYSIS

         PRODUCT NO.                                      202A
         Viscosity @ 40C, cSt                              32
         Viscosity @ 100C, cSt                                 7.0
         Viscosity @ 100F, SUS                            162
         Viscosity @ 210F, SUS                             48
         Viscosity Index                                  170
          Flash Point, C                                  360
          Pour Point, C                                    -40
          API Gravity                                       30.2
          Color Visual                                    Red




        POWERTECH C-2 / C-3 TORQUE FLUID
POWERTECH C-2/C-3 TORQUE FLUID is a torque fluid designed specifically
for transmissions and torque converters that require an Allison C-3 fluid,
including Allison CL(B) T-700 transmissions used in heavy duty trucks, buses
and earth moving equipment.


          TYPICAL ANALYSIS


          PRODUCT NO.                                     209
          Viscosity @ 40C, cSt                              42.7
          Viscosity @ 100C, cSt                              6.4
          Viscosity @ 100F, SUS                           220
          Viscosity @ 210F, SUS                             48
          Viscosity Index                                   98
          Flash Point, C                                  420
          Pour Point, C                                    -22
          API Gravity                                       29.5
          Color ASTM                                         2.0




             POWERTECH C-4 TORQUE FLUID
POWERTECH C-4 TORQUE FLUID is a premium quality hydraulic transmission
fluid that is approved by the Allison Division of General Motors Corporation for
use in Allison power shift transmissions.

POWERTECH C-4 TORQUE FLUID is blended with selected paraffin base
stocks fortified with additives designed to inhibit foaming, corrosion and
oxidation. Pour point depressant additives also provide low temperature
characteristics that aid in starting mobile equipment. This product supersedes
and includes the C-2/C-3 Allison specifications and assures top performance of
the machinery for which this product is recommended.


          TYPICAL ANALYSIS

          PRODUCT NO.                                         211
          Viscosity @ 40C, cSt                                 32.2
          Viscosity @ 100C, cSt                                 7.3
          Viscosity @ 100F, SUS                               163
          Viscosity @ 210F, SUS                                51
          Viscosity Index                                     200
          Flash Point, F                                      390
          Pour Point, F                                       -22
          API Gravity                                          29.5
          Color ASTM                                            3.0
          Foam Height, Max., MM                                10.0
          Breaktime, Max., Sec.                                23.0
          Weight Loss, Mg. Max.                                15.0




     POWERTECH UNIVERSAL TRACTOR HYDRAULIC FLUID

POWERTECH UNIVERSAL TRACTOR HYDRAULIC FLUID is an excellent
multi-purpose lubricating oil recommended for combination transmission,
differential, wet brakes, hydraulic and hydrostatic systems as specified by the
equipment manufacturer's. This product is a special blend of selected paraffinic
base oil, a high performance additive system and a shear stable viscosity index
improver. It is designed to prevent wear in the heavily loaded transmission and
differential gear assembly. The multiplicity of equipment manufacturer's approval
makes this fluid uniquely useful in a broad range of applications. It has the Allison
C-4, C-3 approvals.

ADVANTAGES AND BENEFITS:
 Special additives give chatter free and frictional performances in wet brakes for
  longer service life.
 Low pour point allows for mobility and lubrication at low operating
temperatures
 Shear stable viscosity index improver minimizes the viscosity change in torque
  converters and hydrostatic drives subject to higher operating temperatures
 High performance anti-wear package to enhance load carrying ability and
prevent scoring as well as gear wear
 Contains an anti-oxidant, anti-foam, seal swell along with a rust and corrosion
  inhibitor for longer life and reduced overall maintenance costs

APPLICATIONS/SPECIFICATIONS:
John Deere        J20A, J20C/D Hygard J14B, J21A, JDM
Allison                         C-4, C-3
                                M2C53A/C, M2C41B, M2C86B/C, M2C134A/B/C/D,
Ford New Holland
                                M2C77A, ESN-M
Caterpillar                     TO-2
                                MS-1209/Hy-Tran Ultra, MS-1207/Hy-Tran Plus, MS-
Case/IH                         1210/TCH, MS 1204/TFD Fluid, MS 1205/TFD-II Fluid, MS-
                                1206/PTF Fluid, JIC 145, Hy-Tran
Allis Chalmers                  Power Fluid 821, Power Fluid 322
Massey Ferguson/AGCO M-1129A, M-1135, M-1139, M-1141(Permatran), M-1143
Kubota                          Universal Transdraulic Fluid, UDT Fluid
Oliver/White                    Q-1766B, UHTF Type 55, Q-1722, Q-1802, Q-1826
Deutz-Allis                     AC Power Fluid 821XL
Sunstrand                       Hydrostatic Transmission Fluid
Sperry Vickers                  Pass Pump Test, 35VQ25


               TYPICAL ANALYSIS


              PRODUCT NO.                                          255
              Viscosity @ 40C, cSt                                  59
              Viscosity @ 100C, cSt                                  9.4
              Viscosity @ 100F, SUS                                301
              Viscosity @ 210F, SUS                                 57
              Viscosity Index                                      144
              Pour Point, C                                        -40
              Flash Point, C                                       395
              Specific Gravity @ 60F, gm/cc                          0.876
              Pounds per Gallon                                      7.31
              API Gravity                                           28.3
              Color Visual                                      Amber
      POWERTECH UNIVERSAL TRACTOR HYDRAULIC FLUID
               FOR JOHN DEERE TRACTORS

POWERTECH UNIVERSAL TRACTOR HYDRAULIC FLUID is an excellent
multi-purpose lubricating oil recommended for combination transmission,
differential, wet brakes, hydraulic and hydrostatic systems as specified by the
equipment manufacturer's. This product is a special blend of selected paraffinic
base oil, a high performance additive system and a shear stable viscosity index
improver. It is designed to prevent wear in the heavily loaded transmission and
differential gear assembly. The multiplicity of equipment manufacturer's approval
makes this fluid uniquely useful in a broad range of applications. It has the Allison
C-4, C-3 approvals.

ADVANTAGES AND BENEFITS:
 Special additives give chatter free and frictional performances in wet brakes for
  longer service life.
 Low pour point allows for mobility and lubrication at low operating
temperatures
 Shear stable viscosity index improver minimizes the viscosity change in torque
  converters and hydrostatic drives subject to higher operating temperatures
 High performance anti-wear package to enhance load carrying ability and
prevent scoring as well as gear wear
 Contains an anti-oxidant, anti-foam, seal swell along with a rust and corrosion
  inhibitor for longer life and reduced overall maintenance costs

APPLICATIONS/SPECIFICATIONS:
John Deere        J20A, J20C/D Hygard J14B, J21A, JDM
Allison                      C-4, C-3
                             M2C53A/C, M2C41B, M2C86B/C, M2C134A/B/C/D,
Ford New Holland
                             M2C77A, ESN-M
Caterpillar                  TO-2
                             MS-1209/Hy-Tran Ultra, MS-1207/Hy-Tran Plus, MS-
Case/IH                      1210/TCH, MS 1204/TFD Fluid, MS 1205/TFD-II Fluid, MS-
                             1206/PTF Fluid, JIC 145, Hy-Tran
Allis Chalmers               Power Fluid 821, Power Fluid 322
Massey Ferguson/AGCO M-1129A, M-1135, M-1139, M-1141(Permatran), M-1143
Kubota                       Universal Transdraulic Fluid, UDT Fluid
Oliver/White                 Q-1766B, UHTF Type 55, Q-1722, Q-1802, Q-1826
Deutz-Allis                  AC Power Fluid 821XL
Sunstrand                    Hydrostatic Transmission Fluid
Sperry Vickers              Pass Pump Test, 35VQ25
           TYPICAL ANALYSIS


          PRODUCT NO.                  255
          Viscosity @ 40C, cSt          59
          Viscosity @ 100C, cSt          9.4
          Viscosity @ 100F, SUS        301
          Viscosity @ 210F, SUS         57
          Viscosity Index              144
          Pour Point, C                -40
          Flash Point, C               395
          Specific Gravity @ 60F,
                                         0.876
          gm/cc
          Pounds per Gallon              7.31
          API Gravity                   28.3
          Color Visual                 Amber


                   PURE MINERAL GEAR OIL
PURE MINERAL GEAR OIL is designed for some manually operated
transmissions and gears operating under mild conditions. Pure mineral gear oil is
made from high quality mineral oil and selected inhibitors. PURE MINERAL
GEAR OIL utilizes high quality, solvent-refined base oils. Additives are
incorporated to provide a degree of oxidation, corrosion and foam inhibition - not
normally achieved with straight mineral oil. Friction modifiers and extreme
pressure agents are not employed in GL-1 oils.

PURE MINERAL GEAR OIL is recommended for use in certain transmissions,
final drives and miscellaneous applications in hydraulic systems, gear cases, and
mobile equipment where GL-1 and/or straight mineral oil and specified by the
manufacturer. API Service Classifications: GL-1

PURE MINERAL GEAR OIL is NOT RECOMMENDED for hypoid axles and
other applications requiring an extreme pressure lubricant for GL-5 service.

  TYPICAL ANALYSIS

  PRODUCT NO.                                  231     233          237
  SAE GRADE                                    90      140          250
  Viscosity @ 40C, cSt                     226          480        1095
  Viscosity @ 100C, cSt                     19           32           43
  Viscosity @ 100F, SUS                   1200         2580        6050
  Viscosity @ 210F, SUS                     97          157          212
  Viscosity Index                           94           97           97
  Flash Point, F                           505          550          550
  Pour Point, F                             10           15           30
  Gravity, API                              28.0         27.4         23.6
  Color ASTM                                  6.0         6.5          7.0
                   ROYAL CORNHEAD GREASE
ROYAL CORNHEAD GREASE is an extreme pressure, polyurea thickened
grease, formulated specifically for use in cornhead gear cases and most other
slow moving gear box applications requiring an NLGI “0” grease. ROYAL
CORNHEAD GREASE will not leak from the gear case or drain from the gears
during idle periods. It exhibits excellent resistance to extreme high and low
temperatures and resists rust. It maintains its consistency under severe working
conditions, resists moisture and will not washout.
          TYPICAL ANALYSIS


          PRODUCT CODE                                 995
          NLGI Grade                                      0
          Viscosity @ 40C, cSt                         144
          Viscosity @ 100C, cSt                         10.6
          Viscosity @ 100F, SUS                        776
          Viscosity @ 210F, SUS                         63
          Worked Penetration                           370
          Dropping Point, F                            450
          Soap Type                                    Polyurea
          Soap Percentage                              5-6
          Texture                                      Smooth
          Color                                        Green
          Timken Ok, LBS.                               40
          Four-Ball EP Weld & LWI                      400
       ROYAL POWERTECH ANTI-FREEZE GM
                 APPROVED
  ROYAL POWERTECH ANTI-FREEZE GM APPROVED is a premium quality,
  ethylene glycol based product that is designed for use in both heavy duty and
  automotive engines. Its low silicate formulation meets the stringent aluminum
  protection requirements of the automotive engine as well as complies with the
 heavy-duty diesel engine manufacturer's silicate limits. This product contains the
rust and corrosion protection for aluminum, brass, copper, solder and cast iron as
 well as having excellent anti-foaming properties. It can be readily mixed with any
       clean tap water and is compatible with most cooling system filters and
                              supplemental additives.
          TYPICAL ANALYSIS


          PRODUCT NUMBER                             800
          Color Visual                               Green
          Flash Point, F                             301
          API Gravity                                1.12-1.15
          Boiling Point, F                           300
          Freezing Point, F                          -34
          Glycol, % Wgt.                             94 min
          Ash, % Wgt.                                5.0
     ROYAL 98 LITHIUM COMPLEX EP GREASE

ROYAL 98 LITHIUM COMPLEX EP GREASE is a tremendous product: The
appearance is smooth, adhesive, slightly stringy and BLUE in color. This new
grease is a Lithium 12 Hydroxystearate complex and is formulated for operations
from a minus 40 degrees Fahrenheit, but with a dropping point of 525 degrees
Fahrenheit!

QUALITIES:
 MECHANICAL STABILITY - ROYAL 98 LITHIUM COMPLEX EP GREASE
resists thinning or hardening in bearings, thereby minimizing leakage and
  maintaining extended long life service!
 OXIDATION AND CORROSION PROTECTION - The high level of additive
  treatment minimizes chemical deterioration over extended periods of storage
and
  service. Protects steel and copper alloy bearings against rust and corrosion.
 EXTREME PRESSURE PROTECTION - The EP additives provides effective
wear protection for ball joints, drive shafts and other parts subjected to high
pressure and shock loading.
 FORMULATION - Fully refined lube stocks and additives under rigid laboratory
and process control. Special compounding supplies beneficial anti-friction
properties.
 TEMPERATURE STABILITY - ROYAL 98 LITHIUM COMPLEX EP GREASE
  offers excellent low temperature pumpability and high temperature protection.
  WATER RESISTANCE - It effectively resists washout and excessive dilution
                    by water, assuring all-weather lubrication.

                                   APPLICATIONS:
  Recommended for extended service in heavy-duty automotive, trucks, buses,
 farm tractors, construction equipment, high temp wheel bearings (Disc Brakes),
   roller & ball bearings, electric motor bearings, throw-out bearings, universal
                           joints, chassis, fifth wheel, etc.

       National Lubricating Grease Institute 147; NLGI 148; rating GC-LB
   TYPICAL ANALYSIS


  Product Number                  933                    933C
  NLGI Grade                      No. 1                  No. 2
  Viscosity @ 40C, cSt            145                    145
  Viscosity @ 100C, cSt            13                     13
  Viscosity @ 100F, SUS           800                    800
  Viscosity @ 210F, SUS            70                     70
  Worked Penetration              325                    280
  Dropping Point, F               550                    550
  Soap Type                       Lithium Complex        Lithium Complex
  Soap, %                         9 -11                  9 -11
  Texture                         Smooth and Tacky       Smooth and Tacky
  Color Visual                    Blue                   Blue
  Timken OK, lbs                   60                     60
  Four Ball EP Weld & LWI         315                    315
            ROYAL 760 POLYPLATE EP GREASE
ROYAL 760 POLYPLATE EP GREASE is an outstanding multipurpose, extreme
pressure (EP) Lithium Hydroxy grease. Recommended for extended service in
heavy duty automotive, trucks, buses, farm tractors and construction equipment.
    QUALITIES:
     FORMULATION - Fully refined lube stocks are combined with a high quality
    lithium
        soap and additives under rigid laboratory and process control. Special
    compounding supplies beneficial anti-friction properties.
     EXTREME PRESSURE PROTECTION - The high level of additive treatment
        minimizes chemical deterioration over extended periods of storage and
    service. Protects steel and copper alloy bearings against rust and corrosion.
     MECHANICAL STABILITY - ROYAL 760 POLYPLATE EP GREASE resists
        thinning or hardening in bearings, thereby minimizing leakage and maintaining
        lubrication in long-life service.
     WATER RESISTANCE - It effectively resists washout and excessive dilution
    by water, assuring all-weather lubrication.
      TEMPERATURE STABILITY - ROYAL 760 POLYPLATE EP GREASE offers
            excellent low temperature pumpability and high temperature protection.

                                     APPLICATION:
      ROYAL 760 POLYPLATE EP GREASE is highly recommended for chassis,
    universal joint, wheel bearing and other grease lubrication points for trucks, farm
     tractors, construction equipment, and automobiles. Its multipurpose capability
       usually eliminates the need for other greases, thus avoiding the danger of
                misapplication or mixing greases of difference base types

      ROYAL 760 POLYPLATE EP GREASE can also be used in lubricating many
        types of industrial machinery where poly-lithium-EP grease is specified.

       Meets NLGI Service Classification LB for chassis greases and GB for wheel
                    bearing greases as outlined in ASTM D 4950.
 TYPICAL ANALYSIS

                         985        908C       908B       908A       908        908D
Product Number
                         Semi-Fl.   No. 00     No. 0      No. 1      No. 2      No. 3
Viscosity @ 40C, cSt     104        157        177        178        182        182
Viscosity @ 100C, cSt     10.8       14.7       15.1       15.8       15.4       15.4
Viscosity @ 100F, SUS    545        831        939        945        963        963
Viscosity @ 210F, SUS     63         77         80         81         81         81
Worked Penetration       475        430        385        330        280        230
Dropping Point, F        N/A        N/A        340        360        360        360
                         LITHIUM- LITHIUM- LITHIUM- LITHIUM- LITHIUM- LITHIUM-
SOAP TYPE                12       12       12       12       12       12
                         HYDROXY HYDROXY HYDROXY HYDROXY HYDROXY HYDROXY
SOAP, %                  7-11       7-11       7-11       7-11       7-11       7-11
TIMKEN OK, LBS.           45         45         45         60         75         75
4Ball EP Weld & LWI        250/50     250/50      250/50     250/50         250/50   250/50
Color Visual               Green      Green       Green      Green          Green    Green



     ROYAL 876 HD EP LITHIUM COMPLEX GREASE
    ROYAL 876 HD EP LITHIUM COMPLEX is a, high base oil viscosity, lithium
    complex grease designed for the heavy-duty applications found in the
    construction and mining industry, as well as, automotive, trucking and farming
    applications. ROYAL 876 HD EP LITHIUM COMPLEX can be used wherever
    lithium greases are recommended or preferred, such as in suspension systems,
    wheel bearings, universal joints, ball joints and anti-friction plain bearings. Also,
    ROYAL 876 HD EP LITHIUM COMPLEX is well suited for multipurpose lubricant
    applications in the pulp and paper mill industry, such as paper machine wet ends,
    felt roll bearings and couplings and press sections.

    ROYAL 876 HD EP LITHIUM COMPLEX is a heavy-duty grease offering high
    load capability, primarily due to containing high load base oil. ROYAL 876 HD EP
    LITHIUM COMPLEX also contains tackiness additive to enhance retention on
    lubricant parts. In addition, it offers excellent structural and oxidation stability and
    exhibits high resistance to water washout.
               TYPICAL ANALYSIS


               PRODUCT CODE                                          920
               NLGI Grade                                               2
               Viscosity @ 40C, cSt                                   451
               Viscosity @ 100C, cSt                                   28.4
               Viscosity @ 100F, SUS                                 2429
               Viscosity @ 210F, SUS                                  140
               Penetration Worked                                     285
               Dropping Point, F                                      500
               Color Visual                                          Red
               Texture                                               Tacky
               Timken OK, lbs.                                         80
               4-Ball EP Weld                                         500
               Load Wear Index                                         45
               Wheel Bearing Leakage %                                  3
                     TWIN DISC TORQUE FLUID

TWIN DISC TORQUE FLUID is a very low viscosity fluid designed for use in
Twin Disc three stage torque converters. This specially compounded formula
contains a combination of additives to provide protection against rust, excessive
oxidation and foaming in the three stage converters. The nature of this fluid
makes it a useful fluid when low viscosity spindle oil is needed.

CAUTION should be taken when using this fluid as not all torque converters are
three-stage and its use may be harmful to the equipment. The single stage Twin
Disc and other similar type converters take a fluid having a higher viscosity.

  TYPICAL ANALYSIS

  Product Number                                              206
  Gravity, API                                                 27.5
  Specific Gravity                                               0.85
  Viscosity @ 40C, cSt                                           5.2
  Viscosity @ 100C, cSt                                          1.7
  Viscosity @ 100F, SUS                                        44
  Viscosity @ 210F, SUS                                        31.9
  Viscosity Index                                              95
  Flash Point, COC, F                                         195
  Pour Point, COC, F                                           -45
  Color Visual                                                Red




     WATERPROOF WHEEL BEARING GREASE
WATERPROOF WHEEL BEARING GREASE is a premium Lithium 12/Hydroxy
base grease, which is water insoluble and washout resistant. For slow and high
speed bearings, excellent for wheel bearings because of its washout resistance.
 A full additive grease with antirust, anti-wear, extreme pressure and oxidation
                                      inhibitors
          TYPICAL ANALYSIS


          Product Number                    911
          NLGI Grade                           3
Viscosity @ 40C, cSt    152
Viscosity @ 100C, cSt    15.1
Viscosity @ 100F, SUS   800
Viscosity @ 210F, SUS    80
Worked Penetration      235
Dropping Point, F       390
Soap Type               Lithium 12/Hydroxy
Soap, %                 12 - 14
Texture                 Short Fibre
Color Visual            Amber
% Oil Separation          2.5

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:131
posted:8/18/2010
language:English
pages:23