Removing noise from audio in Adobe Premiere Pro

							Tip, Removing noise from audio in Adobe
Premiere Pro
Posted by: emalik on: September 6, 2007

      In: Adobe Priemere Pro
      Comment!

In this little tutorial,I am just giving you a quick tip on how to remove the noise from the
audio track in adobe premiere pro.

Drag the footage on time-line.
Open the effects panel.
Go to Audio effects.

there you can see three categories, now it depends that which type of audio mode do you
have to which you want to remove the noise.But most of time the audio is Stereo
mode.So i am going with stereo.

Under Audio Effect open the stereo drop down.
There you will find the the DeNoiser effect
Drag and drop the effect on your audio channel.

Now go to Effect control pannel….Windows—>effect control.

There you will see the that DeNoiser is applied under the channel‟s audio
effect……Note…if you are not seeing it under there then either you have not selected the
audio channel or the effect is not applied on audio channel …you could repeat the step
again.

Ok now pree the small arrow on the left of the DeNoiser effect to open it options

There you will see two option, one is custom setup and second is Individual parameters.

Open the Individual parameters by clicking the arrow on the left.

Open Reduction, there you will see a slider…now slide it to the left as much as the noise
is over from the audio you can test the audio by playing the play button on preview
monitor or by hitting the „Space Bar‟ on the keyboard.You can also adjust the slider
position during the playback.

You can also play with the offset an freeze options to get it perfect.

I hope this solves the problem…
Thanks for being in touch.
Removing noise from the audio by using
Adobe Audition
Posted by: emalik on: July 6, 2007

      In: Adobe Audition
      Comment!

A very common problem during the Voice recording is that some ambiance sound is
always added to the sound unless you make whole room sound proof.

Here is an easy way to remove that sound without affecting the original audio content by
using a software known as Adobe Audition..You could record the audio either by using
Audition or any other software which you like.When you done with recording your audio
follow the process described below

1-Run the adobe audition

2-Goto file>>Open. or Press Ctrl+O

3-Select the audio file from which you want to remove noise.

4-Next step is to click and drag on the waveform to select some part of it ,where no
activity is going on or its ideal…you can see the follwing picture as a reference.(by doing
this we tell the audition compiler that this selection is noise which we want to remove)
5- Now go to Effects>>Noise reduction>>Noise reduction




6- On Noise redution dialog box click “get profile from selection” button.




7- when u click that button audition get the noise profile from your selection……Now
click Close button on the dialog box to hide it.(Please do not click the Cancel button
because it do not save the selction profile).

8- Now select the whole sound track either by clicking the edit menu>>>Select entire
wave or by pressing the shortcut ctrl+A.
9- Now again open the Noise reduction dialog by Effects>>Noise reduction>>Noise
reduction..and click ok. when you click ok Audition performs the process of noise
reduction this could take some time depending on the length of the track.

10- Now when its done go click the play button at the bottom left of Audition to hear
what u got, if u satisfied then go to file menu and select save As.

Thats it..

Thanks for being in touch.