--> by sauve




Our people care . . .

Our equipment is the proof.

M60 Emulsion Loader
Standard Features
ŸReliable M60 four wheel drive, center articulated carrier specifically designed and manufactured for the rugged underground mining conditions ŸDeutz BF6L914 diesel engine - 150 HP ŸClark Hurth 32,000 series powershift transmission ŸNew Holland D65I series front and rear axles ŸFully hydraulic internal wet disc brake axles with independant front and rear application systems ŸPush to apply emergency parking brake control button ŸSpring applied hydraulic release parking/emergency brakes on both axles ŸFront and rear brake system pressure gauges ŸEngine gauges with low oil pressure/high temperature ŸEngine temperature and pressure warning lights ŸTransmission and engine temperature and pressure warning gauges ŸDonaldson dry type air filter assembly ŸECS exhaust purifier and silencer ŸHourmeter, voltmeter, fuel level gauge ŸAudio back up alarm ŸLockable master switch ŸHydraulic selector valve for auxiliary hydraulic control function ŸCentral manual lube point for powerframe ŸHydraulic power orbitol type steering with bi-directional operation ŸErgonomic operator’s compartment ŸSafe entry/exit with three point contact ŸMechanical seats with seat belts ŸTwo (2) forward and two (2) reverse drive lights ŸWheel chock brackets Ÿ10:00x20 solid tires and rims Ÿ57.5 US gallon fuel tank & 24.2 US gallon hydraulic tank ŸBoom ŸAluminum emulsion tank ŸTransfer pump ŸEmulsion hose reel ŸStrobe light

Available Options
•Mercedes MB904 137 HP or 173 HP diesel engine •Non ROPS and ROPS canopies and cabs •Air conditioners and heaters for cabs •Fire extinguishers •Automatic lubrication systems •Wiggins fuel tanks •HTI wrap and Firwin Blankets •Wheel chocks •Stick steering •Air ride seats •Brake lights •Set two (2) 30”, 39”, or 48” front jacks DIMENSIONS WEIGHT TURNING ANGLE Inside Radius: 18’ 4” •Air hydraulic power pack

20% Grade Up Ramp 1st gear 4 km/hr 2nd gear 8 km/hr 3rd gear 4 km/hr

SPEEDS Speed on Flats 1st gear 2nd gear 3rd gear

4 km/hr 8 km/hr 15 km/hr

8’ 6” wide x 29’ 9” long x 7’ 10” high 40,000 lbs. Gross Vehicle Weight 42 degrees Outside Radius: 27’ 10”

At Marcotte, engineering is a process of continuous product improvement; therefore,specifications are subject to change without notice.
2291 Lasalle Blvd.,Sudbury, Ontario, Canada P3A 2A9 Toll free: 1-800-461-5955 Phone: (705) 566-5030 Fax: (705) 566-5657 www.marcottemining.com


To top