Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

Painting - DOC - DOC

VIEWS: 315 PAGES: 16

									Woodside General Learning Areas (6)                                                     0671 PAINTING



0671 PAINTING




1     GENERAL


1.1   AIMS
Responsibilities
General: Provide coating systems to substrates as follows:
- Consistent in colour, gloss level, texture and dry film thickness.
- Free of runs, sags, blisters, or other discontinuities.
- Paint systems fully opaque.
- Clear finishes at the level of transparency consistent with the product.
- Fully adhered.
- Resistant to environmental degradation within the manufacturer’s stated life span.
Selections: Conform to the Selections.

1.2   CROSS REFERENCES
General
General: Conform to the General requirements worksection.
Associated worksections
All sections of this specification are to be referred to as one document.

1.3   STANDARDS
Painting
General: Comply with the recommendations of those parts of AS/NZS 2311 and AS/NZS 2312 which
are referenced in this worksection.
Australian Paint Approvals Scheme (APAS) (formerly Government Paint Committee (GPC)). For paint
types identified by a GPC specification code, conform to the specification represented by that code.

1.4   INTERPRETATION
Definitions
General: For the purposes of this worksection the definitions given below apply.
- Standard: To AS/NZS 2310.
- Substrate: The surface to which a sealant must bond.
- Background: The surface to which the undercoat is applied.
- Paint: A product in liquid form, which when applied to a surface, forms a dry film having protective,
  decorative or other specific technical properties.
- Sealer: A product used to seal substrates to prevent:
  . Materials from bleeding through to the surface.
  . Reaction of the substrate with incompatible top coats.
  . Undue absorption of the following coat into the substrate.
- Primer, prime coat: The first coat of a painting system that helps bind subsequent coats to the
  substrate and which may inhibit its deterioration.
- Undercoat: An intermediate coat formulated to prepare a primed surface or other prepared surface
  for the finishing coat.
- Finish coat: The final coat of a coating system.
- Gloss: The optical property of a surface, characterised by its ability to reflect light specularly.
- Sheen: Gloss which is observed on an apparently matt surface at glancing angles of incidence.
- Levels of gloss finish: When the specular direction is 60 degrees, a surface with the following
  specular gloss reading are defined as follows:

                                            Page 174 of 405
Woodside General Learning Areas (6)                                                   0671 PAINTING



  . Full gloss finish between 50 and 85 gloss units.
  . Semi gloss between 20 and 50 gloss units.
  . Low gloss between 5 and 20 gloss units ( also known as low sheen).
  . Flat finish < 5 gloss units (also known as matt).
- Opacity: The ability of a paint to obliterate the colour difference of a substrate.
- Adhesion: The sum total of forces of attachment between a dry film and its substrate. See AS 1580
  for tests to assess adhesion.
- Gloss unit: Numerical value for the amount of specular reflection relative to that of a standard
  surface under the same geometric conditions.

1.5   INSPECTION
Notice
Inspection: Give sufficient notice so that inspection may be made of the following:
- Painting stages:
  . Completion of surface preparation.
  . After application of prime or seal coats.
  . After application of undercoat.
  . After application of each subsequent coat.
- Clear finishing stages:
  . Before surface preparation of timber.
  . Completion of surface preparation.
  . After staining.
  . After sanding of sealer.
  . After application of each clear finishing coat.

1.6   TESTS
Fire retardant systems
General: Minimum indices, when tested to AS/NZS 1530.3, on a substrate representative of the
intended use, for paint systems specified as Low flame spread or Fire retardant:
- Spread of flame index: 3.
- Sum of Ignitability index and Heat evolved index: 7.
- Smoke developed index: 3.

1.7   SUBMISSIONS
Clear finish coated samples
General: Submit pieces of timber or timber veneer matching the timber to be used in the works,
prepared, puttied, stained, sealed and coated in accordance with the specified system, of sufficient
size so that, each piece can be cut into 4 segments, marked for identification, and distributed as
directed.
Opaque coated samples
General: Submit, on representative substrates, samples of each coating system showing surface
preparation, colour, gloss level, texture, and physical properties; to the Coated samples schedule.
Coated samples schedule
Substrate                  Paint system               Colour                    Sample size
James Hardie D3-      High Build Paint Finish       Refer FINISHES             1000 x 1000mm
ComTex Façade System (Acratex)                      SCHEDULE
Masonry/ brickwork    High Build Paint Finish       Refer FINISHES             1000 x 1000mm
                      (Acratex)                     SCHEDULE
Internal plasterboard Low sheen latex               Refer FINISHES             1000 x 1000mm
feature wall to G.09                                SCHEDULE



                                           Page 175 of 405
Woodside General Learning Areas (6)                                                        0671 PAINTING




Paint
General: Submit the paint manufacturer’s published material safety data sheets (MSDS) showing the
health and safety precautions to be taken during application.
Maintenance manual: Submit the paint manufacturer’s published recommendations for maintenance.
Proposed products
Proprietary materials: If the brand of paint has not been specified, submit the proposed brand of paint
and paint line, at least 3 weeks before the paint is required.
Execution
General: Submit name and contact details of proposed specialist applicators.
Product conformity
General: Submit current assessments of conformity as follows:
- Product register entry: Australian Paint Approvals Scheme (APAS).

2     PRODUCTS


2.1   PAINTS
APAS specifications
General: Provide paints and other materials which are scheduled in the Australian Paint Approvals
Scheme ‘List of Approved Products’ as complying with cited APAS specifications.
Quality: If the product is offered in a number of levels of quality, provide premium quality lines.
Combinations
General: Do not combine paints from different manufacturers in a paint system.
Clear timber finish systems: Provide only the combinations of putty, stain and sealer recommended by
the manufacturer of the top coats.
Delivery
General: Deliver paints to the site in the manufacturer’s labelled and unopened containers. Ensure
containers of materials specified by a APAS specification code are labelled accordingly.
Tinting
General: Provide only products which are colour tinted by the manufacturer or supplier.
Toxic ingredients
General: Comply with the requirements of Appendix P Uniform Paint Standard to the Standard for the
Uniform Scheduling of Drugs and Poisons (SUSDP).
Putty
Non-timber substrates: Oil-based or polymeric based.
Timber finishes: Lacquer or water based only.

3     EXECUTION


3.1   PREPARATION
Standards
General: To AS/NZS 2311 Sections 3.
Protection of steelwork: To AS/NZS 2312 Sections 4.
Order of work
Other trades: Before painting, complete the work of other trades as far as practicable within the area
to be painted, except for installation of fittings, floor sanding and laying flooring materials.
Clear finishes: Complete clear timber finishes before commencing opaque paint finishes in the same
area.
Protection
Fixtures: Remove door furniture, switch plates, light fittings and other fixtures before starting to paint,
and refix in position undamaged on completion of the installation.
Adjacent surfaces: Protect adjacent finished surfaces liable to damage from painting operations.
                                             Page 176 of 405
Woodside General Learning Areas (6)                                                      0671 PAINTING



 ‘Wet paint’ warning
General: Place notices conspicuously and do not remove them until paint is dry.
Restoration
General: Clean off marks, paint spots and stains progressively and restore damaged surfaces to their
original condition. Touch up damaged decorative paintwork or misses only with the paint batch used in
the original application.
Substrate preparation
General: Prepare substrates to receive the painting systems.
Cleaning: Clean down the substrate surface. Do not cause undue damage to the substrate or damage
to, or contamination of, the surroundings.
Filling: Fill cracks and holes with fillers, sealants, putties or grouting cements as appropriate for the
finishing system and substrate, and sand smooth.
Clear finish: Provide filler tinted to match the substrate.
Clear timber finish systems: Prepare the surface so that its attributes will show through the clear finish
without blemishes, by methods which may involve the following:
- Removal of bruises.
- Removal of discolourations, including staining by oil, grease and nailheads.
- Bleaching where necessary to match the timber colour sample.
- Puttying.
- Fine sanding (last abrasive no coarser than 220 grit) to show no scratches across the grain.
Preparation
General: Prepare substrates to the Preparation schedule.
Preparation schedule
Substrate                                    Preparation method
James Hardie D3-ComTex Façade                Refer Manufacturer’s recommendation
System to be texture coated
Brickwork to be texture coated               Refer Manufacturer’s recommendation


3.2   PAINTING
Standards
General: To AS/NZS 2311 Section 6.
Protection of steelwork: To AS/NZS 2312 Section 8.
Light levels
General: During preparation of surfaces, painting, and inspection, maintain light levels such that the
luminance (photometric brightness) of the surface is equal to the specified permanent artificial
illumination conditions or 400 lux, whichever is the greater.
Drying
General: Use a moisture meter to demonstrate that the moisture content of the substrate is at or below
the recommended maximum level for the type of paint and the substrate material.
Paint application
General: Apply the first coat immediately after substrate preparation and before contamination of the
substrate can occur. Apply subsequent coats after the manufacturer’s recommended drying period
has elapsed.
Priming before fixing
General: Apply one coat of wood primer (2 coats to end grain) to the back of the following before fixing
in position:
- External fascia boards.
- Timber door and window frames.
-
- Doors, including top and bottom of all doors
- Skirtings and architraves
                                            Page 177 of 405
Woodside General Learning Areas (6)                                                     0671 PAINTING



- Associated trims and glazing beads.
- Timber board cladding.
Spraying
Unless prior approval is obtained, spray painting is not permitted.
General: If the paint application is by spraying, use conventional or airless equipment which does the
following:
- Satisfactorily atomises the paint being applied.
- Does not require the paint to be thinned beyond the maximum amount recommended by the
   manufacturer.
- Does not introduce oil, water or other contaminants into the applied paint.
Paint with known health hazards: Provide masking, ventilating and screening facilities generally to the
standards set out for spray painting booths, AS/NZS 4114.1 and AS/NZS 4114.2.
Sanding
Clear finishes: Sand the sealer using the finest possible abrasive (no coarser than 320 grit) and avoid
cutting through the colour. Take special care with round surfaces and edges.
Repair of galvanizing
General: For galvanized surfaces which have been subsequently welded, prime the affected area.
Primer: To APAS-2916, two pack.
Tinting
General: Tint each coat of an opaque coating system so that each has a noticeably different tint from
the preceding coat, except for top coats in systems with more than one top coat.
Services
General: If not embedded, paint new services and equipment including in plant rooms, except
chromium, anodised aluminium, GRP, UPVC, stainless steel, non-metallic flexible materials and
normally lubricated machined surfaces. Repaint proprietary items only if damaged.

4     SELECTIONS


4.1   PAINT SYSTEMS
Paint system description by APAS specification
General: Where nominated in the Painting schedule, apply the paint system specified in the APAS
paint system tables.
Number of coats
General: Unless specified as one coat or two coat systems, each paint system consists of at least 3
coats.

4.2   HIGH BUILD PAINT FINISH
High Build Paint System
Finish to external FC wall lining: High-build textured paint system
Proprietary Item: DULUX Acra Tex 958 AcraSand
Substrate: FC sheet or brickwork
Preparation: Ensure surface is clean, sound, dry and free of any dust, dirt and other contaminants.
Top coating system:
Primer: DULUX Acra Tex 501/1 Acra Prime Water Based
Second Coat: DULUX Acra Tex 958 AcraSand
Third Coat: DULUX Acra Shield 955
Sample reference area: must be completed prior to commencing full application.
Control Joints: Provide 10mm wide Panel expressed joints at all locations of control joints in substrate.
Provide sealant filled joints over bond breaker tape between Panels.
Colour: To be advised – from Dulux range



                                            Page 178 of 405
Woodside General Learning Areas (6)                                                    0671 PAINTING



4.3   PAINTING SCHEDULES
Exterior painting schedule
Surface identification Substrate                    Paint system               Colour reference
Structural steel          Galvanised steel          Semi gloss solvent         Refer FINISHES
components noted to be                              borne                      SCHEDULE
painted – posts, rafters,
edge beams & purlins,
external columns,
outdoor area steelwork

Soffit Linings           FC Sheet                   Low gloss latex            Refer FINISHES
                                                                               SCHEDULE
External Wall lining     James Hardie D3-     Dulux Acra Tex high              Refer FINISHES
                         ComTex Façade System build paint finish               SCHEDULE

Interior painting schedule
Surface identification Substrate                    Paint system               Colour reference
New walls                    Plasterboard           Low gloss latex          Refer FINISHES
                                                    (low sheen acrylic)      SCHEDULE
New doors and                MDF/ Timber            Semi gloss solvent borne Refer FINISHES
architraves                                                                  SCHEDULE


4.4   PAINT SYSTEMS FOR LOW VOC EMITTING PAINTS
Painting schedules
Provide the following paint systems where noted in the Interior painting schedule and the Exterior
painting schedule:
- Primers and undercoats: Low odour/low environmental impact type as defined by APAS with a VOC
  limit ≥ 5 g/litre.
- Low gloss white or light coloured latex paints for broardwall areas: Low odour/low environmental
  impact type to APAS 0215 specification with a VOC limit ≥ 5 g/litre.
- Coloured low gloss latex paints: Low odour/low environmental impact type to APAS 0260/3
  specification with a VOC limit ≥ 85 g/litre.
- Gloss latex paints for timber doors and trims: Low odour/low environmental impact type to
  APAS 0260/1 specification with a VOC limit ≥ 90 g/litre.

4.5   APAS PAINT SYSTEM TABLES
General
General: Provide the paint type and coating sequence noted in the APAS Paint System Tables for
each of the paint systems listed in the Interior painting schedule and the Exterior painting
schedule, and for each substrate to which those systems are applied in the project.
The codes for each coat are APAS Specification codes.
Flat latex: Interior
Substrate                                             1st Coat       2nd Coat         3rd Coat
Existing paintwork (solvent-borne)                   0260/4           0260/4
Existing paintwork (latex)                           0260/4           0260/4
Concrete                                             0172             0260/4           0260/4
Tilt-up concrete                                     0171             0260/4           0260/4
Cement render                                        0172             0260/4           0260/4
Fibre cement                                         0172             0260/4           0260/4
Masonry                                              0172             0260/4           0260/4

                                             Page 179 of 405
Woodside General Learning Areas (6)                                    0671 PAINTING



Set plaster                                      0171       0260/4     0260/4
Fibrous plaster                                  0171       0260/4     0260/4
Glass reinforced gypsum plaster                  0171       0260/4     0260/4
Plasterboard (paper faced)                       0172       0260/4     0260/4
Iron and steel                                   0032       0260/4     0260/4
Aluminium                                        0035/3     0260/4     0260/4
Metallic-coated steel                            0134       0260/4     0260/4
Oil-based air-drying primed metal                0260/4     0260/4
Organic or inorganic zinc primed metal           0171       0260/4     0260/4
Timber                                           0183       0260/4     0260/4
Particleboard                                    0183       0260/4     0260/4
Medium density fibreboard                        0172       0260/4     0260/4
Hardboard, unprimed                              0183       0260/4     0260/4
Pre-primed board                                 0260/4     0260/4
Organic fibreboard                               0183       0260/4     0260/4
UPVC                                             0016/1     0260/4     0260/4
Glass reinforced plastic                         2971       0260/4     0260/4


Low gloss latex: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0260/3     0260/3
Existing paintwork (latex)                       0260/3     0260/3
Concrete                                         0172       0260/3     0260/3
Tilt-up concrete                                 0171       0260/3     0260/3
Cement render                                    0172       0260/3     0260/3
Sprayed ceiling                                  0172       0260/3     0260/3
Fibre cement                                     0172       0260/3     0260/3
Masonry                                          0172       0260/3     0260/3
Set plaster                                      0171       0260/3     0260/3
Fibrous plaster                                  0171       0260/3     0260/3
Glass reinforced gypsum plaster                  0171       0260/3     0260/3
Plasterboard (paper faced)                       0172       0260/3     0260/3
Iron and steel                                   0032       0260/3     0260/3
Aluminium                                        0035/3     0260/3     0260/3
Metallic-coated steel                            0134       0260/3     0260/3
Oil-based air-drying primed metal                0260/3     0260/3
Organic or inorganic zinc primed metal           0171       0260/3     0260/3
Timber                                           0183       0260/3     0260/3

                                         Page 180 of 405
Woodside General Learning Areas (6)                                    0671 PAINTING



Particleboard                                    0183       0260/3     0260/3
Medium density fibreboard                        0172       0260/3     0260/3
Hardboard, unprimed                              0183       0260/3     0260/3
Pre-primed board                                 0260/3     0260/3
Organic fibreboard                               0183       0260/3     0260/3
UPVC                                             0016/1     0260/3     0260/3
Glass reinforced plastic                         2971       0260/3     0260/3


Flat or low gloss latex: Exterior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0280/3     0280/3
Existing paintwork (latex)                       0280/3     0280/3
Tilt-up concrete                                 0171       0280/3     0280/3
Concrete                                         0280/3     0280/3
Cement render                                    0280/3     0280/3
Fibre cement                                     0280/3     0280/3
Compressed fibre cement                          0171       0280/3     0280/3
Masonry                                          0280/3     0280/3
Iron and steel                                   0032       0280/3     0280/3
Aluminium                                        0035/3     0280/3     0280/3
Metallic-coated steel                            0134       0280/3     0280/3
Oil-based air-drying primed metal                0280/3     0280/3
Organic or inorganic zinc primed metal           0280/3     0280/3
Cat. epoxy zinc phosphate primed metal           0280/3     0280/3
Timber                                           0183       0280/3     0280/3
Exterior grade hardboard                         0181       0280/3     0280/3
UPVC                                             0280/3     0280/3
Glass reinforced plastic                         2971       0260/3     0280/3


Semi-gloss latex: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0260/2     0260/2
Existing paintwork (latex)                       0260/2     0260/2
Concrete                                         0172       0260/2     0260/2
Tilt-up concrete                                 0171       0260/2     0260/2
Cement render                                    0172       0260/2     0260/2
Sprayed ceiling                                  0172       0260/2     0260/2
Fibre cement                                     0172       0260/2     0260/2
Masonry                                          0172       0260/2     0260/2

                                         Page 181 of 405
Woodside General Learning Areas (6)                                    0671 PAINTING



Set plaster                                      0171       0260/2     0260/2
Fibrous plaster                                  0171       0260/2     0260/2
Glass reinforced gypsum plaster                  0171       0260/2     0260/2
Plasterboard (paper faced)                       0172       0260/2     0260/2
Iron and steel                                   0032       0260/2     0260/2
Aluminium                                        0035/3     0260/2     0260/2
Metallic-coated steel                            0134       0260/2     0260/2
Oil-based air-drying primed metal                0260/2     0260/2
Organic or inorganic zinc primed metal           0171       0260/2     0260/2
Timber                                           0183       0260/2     0260/2
Particleboard                                    0183       0260/2     0260/2
Medium density fibreboard                        0172       0260/2     0260/2
Hardboard, unprimed                              0183       0260/2     0260/2
Pre-primed board                                 0260/2     0260/2
Organic fibreboard                               0183       0260/2     0260/2
UPVC                                             0016/1     0260/2     0260/2
Glass reinforced plastic                         2971       0260/2     0260/2


Semi-gloss latex: Exterior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0280/2     0280/2
Existing paintwork (latex)                       0280/2     0280/2
Concrete                                         0280/2     0280/2
Tilt-up concrete                                 0171       0280/2     0280/2
Cement render                                    0280/2     0280/2
Fibre cement                                     0280/2     0280/2
Compressed fibre cement                          0171       0280/2     0280/2
Masonry                                          0280/2     0280/2
Iron and steel                                   0032       0280/2     0280/2
Aluminium                                        0035/3     0280/2     0280/2
Metallic-coated steel                            0134       0280/2     0280/2
Oil-based air-drying primed metal                0280/2     0280/2
Organic or inorganic zinc primed metal           0280/2     0280/2
Cat. epoxy zinc phosphate primed metal           0280/2     0280/2
Timber                                           0183       0280/2     0280/2
Exterior grade hardboard                         0183       0280/2     0280/2
UPVC                                             0280/2     0280/2
Glass reinforced plastic                         2971       0280/2     0280/2


                                         Page 182 of 405
Woodside General Learning Areas (6)                                    0671 PAINTING



Gloss latex: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0260/1     0260/1
Existing paintwork (latex)                       0260/1     0260/1
Concrete                                         0172       0260/1     0260/1
Tilt-up concrete                                 0171       0260/1     0260/1
Cement render                                    0172       0260/1     0260/1
Sprayed ceiling                                  0172       0260/1     0260/1
Fibre cement                                     0172       0260/1     0260/1
Masonry                                          0172       0260/1     0260/1
Set plaster                                      0171       0260/1     0260/1
Fibrous plaster                                  0171       0260/1     0260/1
Glass reinforced gypsum plaster                  0171       0260/1     0260/1
Plasterboard (paper faced)                       0172       0260/1     0260/1
Iron and steel                                   0032       0260/1     0260/1
Aluminium                                        0035/3     0260/1     0260/1
Metallic-coated steel                            0134       0260/1     0260/1
Oil-based air-drying primed metal                0260/1     0260/1
Organic or inorganic zinc primed metal           0171       0260/1     0260/1
Timber                                           0183       0260/1     0260/1
Particleboard                                    0183       0260/1     0260/1
Medium density fibreboard                        0172       0260/1     0260/1
Hardboard, unprimed                              0183       0260/1     0260/1
Pre-primed board                                 0260/1     0260/1
Organic fibreboard                               0183       0260/1     0260/1
Glass reinforced plastic                         2971       0260/1     0260/1


Gloss latex: Exterior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0280/1     0280/1
Existing paintwork (latex)                       0280/1     0280/1
Concrete                                         0280/1     0280/1
Tilt-up concrete                                 0171       0280/1     0280/1
Cement render                                    0280/1     0280/1
Fibre cement                                     0280/1     0280/1
Compressed fibre cement                          0171       0280/1     0280/1
Masonry                                          0280/1     0280/1
Iron and steel                                   0032       0280/1     0280/1


                                         Page 183 of 405
Woodside General Learning Areas (6)                                    0671 PAINTING



Aluminium                                        0035/3     0280/1     0280/1
Metallic-coated steel                            0134       0280/1     0280/1
Oil-based air-drying primed metal                0280/1     0280/1
Organic or inorganic zinc primed metal           0280/1     0280/1
Cat. epoxy zinc phosphate primed metal           0280/1     0280/1
Timber                                           0183       0280/1     0280/1
Exterior grade hardboard                         0183       0280/1     0280/1
UPVC                                             0280/1     0280/1
Glass reinforced plastic                         2971       0280/1     0280/1


Semi-gloss, solvent-borne: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0016/1     0015/3     0015/3
Existing paintwork (latex)                       0016/1     0015/3     0015/3
Concrete                                         0172       0015/3     0015/3
Tilt-up concrete                                 0171       0015/3     0015/3
Cement render                                    0172       0015/3     0015/3
Sprayed ceiling                                  0172       0015/3     0015/3
Fibre cement                                     0172       0015/3     0015/3
Masonry                                          0172       0015/3     0015/3
Set plaster                                      0171       0015/3     0015/3
Fibrous plaster                                  0171       0015/3     0015/3
Glass reinforced gypsum plaster                  0171       0015/3     0015/3
Plasterboard (paper faced)                       0172       0015/3     0015/3
Iron and steel                                   0032       0015/3     0015/3
Aluminium                                        0035/3     0015/3     0015/3
Metallic-coated steel                            0134       0015/3     0015/3
Oil-based air-drying primed metal                0016/1     0015/3     0015/3
Organic or inorganic zinc primed metal           0134       0015/3     0015/3
Timber                                           0016/1     0015/3     0015/3
Particleboard                                    0016/1     0015/3     0015/3
Medium density fibreboard                        0172       0015/3     0015/3
Hardboard, unprimed                              0016/1     0015/3     0015/3
Pre-primed board                                 0016/1     0015/3     0015/3
Organic fibreboard                               0016/1     0015/3     0015/3
UPVC                                             0015/3     0015/3
Glass reinforced plastic                         2971       0015/3     0015/3



                                         Page 184 of 405
Woodside General Learning Areas (6)                                    0671 PAINTING



Full gloss, solvent-borne: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0016/1     0015/3     0015/1
Existing paintwork (latex)                       0016/1     0015/3     0015/1
Concrete                                         0172       0015/3     0015/1
Tilt-up concrete                                 0171       0015/3     0015/1
Cement render                                    0172       0015/3     0015/1
Sprayed ceiling                                  0172       0015/3     0015/1
Fibre cement                                     0172       0015/3     0015/1
Masonry                                          0172       0015/3     0015/1
Set plaster                                      0171       0015/3     0015/1
Fibrous plaster                                  0171       0015/3     0015/1
Glass reinforced gypsum plaster                  0171       0015/3     0015/1
Plasterboard (paper faced)                       0172       0015/3     0015/1
Iron and steel                                   0032       0015/3     0015/1
Aluminium                                        0035/3     0015/3     0015/1
Metallic-coated steel                            0134       0015/3     0015/1
Oil-based air-drying primed metal                0016/1     0015/3     0015/1
Organic or inorganic zinc primed metal           0134       0015/3     0015/1
Timber                                           0016/1     0015/3     0015/1
Particleboard                                    0016/1     0015/3     0015/1
Medium density fibreboard                        0172       0015/3     0015/1
Hardboard, unprimed                              0016/1     0015/3     0015/1
Pre-primed board                                 0016/1     0015/3     0015/1
Organic fibreboard                               0016/1     0015/3     0015/1
UPVC                                             0015/3     0015/3
Glass reinforced plastic                         2971       0015/3     0015/1


Full gloss, solvent-borne: Exterior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)               0016/1     0015/1     0015/1
Existing paintwork (latex)                       0016/1     0015/1     0015/1
Compressed fibre cement                          0171       0015/1     0015/1
Iron and steel                                   0032       0015/1     0015/1
Aluminium                                        0035/3     0015/1     0015/1
Metallic-coated steel                            0134       0015/1     0015/1
Oil-based air-drying primed metal                0016/1     0015/1     0015/1
Organic or inorganic zinc primed metal           0134       0015/1     0015/1

                                         Page 185 of 405
Woodside General Learning Areas (6)                                        0671 PAINTING



Cat. epoxy zinc phosphate primed metal           0015/1         0015/1
Timber                                           0181           0016/1     0015/1
Pre-primed exterior grade hardboard              0016/1         0015/1     0015/1
UPVC                                             0015/1         0015/1
Glass reinforced plastic                         2971           0015/1     0015/1


Texture finish, latex: Interior
Substrate                                        1st Coat       2nd Coat   3rd Coat
Concrete                                         0118/3         0118/3
Tilt-up concrete                                 0171           0118/3     0118/3
Cement render                                    0118/3         0118/3
Fibre cement                                     0118/3         0118/3
Masonry                                          0118/3         0118/3
Fibrous plaster                                  0171           0118/3     0118/3
Glass reinforced gypsum plaster                  0171           0118/3     0118/3
Iron and steel                                   0032           0118/3     0118/3
Metallic-coated steel                            0134           0118/3     0118/3
Timber                                           0016/1         0118/3     0118/3
Particleboard                                    0016/1         0118/3     0118/3
Hardboard, unprimed                              0016/1         0118/3     0118/3
Organic fibreboard                               0016/1         0118/3     0118/3


Texture finish, latex: Exterior
Substrate                                       System
Concrete                                        0117/3 system
Cement render                                   0117/3 system
Fibre cement                                    0117 system
Masonry                                         0117/3 system
Iron and steel                                  0117 system
Metallic-coated steel                           0117/3 system
Timber                                          0117 system


One pack varnish clear: Interior
Substrate                                        1st Coat       2nd Coat   3rd Coat
Existing clear finish                            0114
Timber                                           0114           0114
Particleboard                                    0114           0114       0114
Medium density fibreboard                        0114           0114       0114



                                         Page 186 of 405
Woodside General Learning Areas (6)                                    0671 PAINTING



One pack polyurethane clear: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Concrete                                         0208       0208       0208
Timber                                           0205       0205
Particleboard                                    0205       0205
Cork                                             0205       0205


Two pack polyurethane clear: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Timber                                           0206       0206       0206
Particleboard                                    0206       0206       0206
Cork                                             0206       0206       0206


Two pack epoxy, water-borne: Interior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing paintwork                               0167       0167
Concrete                                         0171       0167       0167
Cement render                                    0171       0167       0167
Fibre cement                                     0171       0167       0167
Masonry                                          0171       0167       0167
Iron and steel                                   0032       0167       0167
Aluminium                                        0035/3     0167       0167
Metallic-coated steel                            0134       0167       0167
Oil-based air-drying primed metal                0032       0167       0167
Cat. epoxy zinc phosphate primed metal           0167       0167
Timber                                           0183       0167       0167


Opaque timber finish, latex: Exterior
Substrate                                        1st Coat   2nd Coat   3rd Coat
Existing timber finish (latex)                   0280/5
Cement render                                    0280/5     0280/5
Fibre cement                                     0280/5     0280/5
Masonry                                          0280/5     0280/5
                                                                              **
Iron and steel                                   0032       0032       0280/5
Metallic-coated steel                            0134       0280/5     0280/5
Oil-based air-drying primed metal                0280/5     0280/5
Organic or inorganic zinc primed metal           0280/5     0280/5
Timber                                           0280/5     0280/5
Particleboard                                    0280/5     0280/5
Pre-primed board                                 0280/5     0280/5

                                         Page 187 of 405
Woodside General Learning Areas (6)                                     0671 PAINTING



Organic fibreboard                                0280/5     0280/5
Exterior grade hardboard                          0280/5     0280/5
UPVC                                              0280/5     0280/5
Glass reinforced plastic                          2971       0280/5     0280/5
**
     4th Coat 0280/5


Semi-transparent oil-based timber finish
Substrate                                         1st Coat   2nd Coat
Existing semi-transparent timber finish           0115
Timber                                            0115       0115


Paving paint - Semi gloss
Substrate                                         1st Coat   2nd Coat   3rd Coat
Existing paintwork                                0200/1
Concrete                                          0200/1     0200/1
Fibre cement                                      0200/1     0200/1
Clay brick                                        0200/1     0200/1
Timber                                            0200/1     0200/1
Particleboard                                     0200/1     0200/1
Cork                                              0200/1     0200/1


Roofing paint, latex
Substrate                                         1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)                0012/2     0012/2
Existing paintwork (latex)                        0012/2     0012/2
Concrete                                          0012/2     0012/2
Cement render                                     0012/2     0012/2
Fibre cement                                      0012/2     0012/2
Iron and steel                                    0032       0032       0012/1 **
Metallic-coated steel                             0134       0012/1     0012/1
Oil-based air-drying primed metal                 0012/1     0012/1
Organic or inorganic zinc primed metal            0012/1     0012/1
Timber                                            0183       0012/2     0012/2
UPVC                                              0012/2     0012/2
** 4th Coat 0012/1


Roofing paint, solvent-borne
Substrate                                         1st Coat   2nd Coat   3rd Coat
Existing paintwork (solvent-borne)                0011       0011
Existing paintwork (latex)                        0011       0011


                                          Page 188 of 405
Woodside General Learning Areas (6)                                          0671 PAINTING



Substrate                                        1st Coat       2nd Coat     3rd Coat
Iron and steel                                   0032           0011         0011
Metallic-coated steel                            0134           0011         0011
Oil-based air-drying primed metal                0011           0011
Organic or inorganic zinc primed metal           0134           0011         0011

Clear water repellent for masonry
Substrate                                        1st Coat       2nd Coat
Concrete                                         0116/1         0116/1
Masonry                                          0116/1         0116/1


Low flame spread coating
Substrate                                       System
Existing low flame spread paintwork             Topcoat of relevant system
Concrete                                        0064/3
Cement render                                   0064/3
Fibre cement                                    0064/3
Masonry                                         0064/3
Iron and steel                                  0064/1 system
Metallic-coated steel                           0064/2 system
Timber                                          0064/4 system
Particleboard                                   0064/4 system


Clear graffiti barrier
Substrate                                       System
Existing paintwork                              1441/1
Concrete                                        1441/1
Cement render                                   1441/1
Fibre cement                                    1441/1
Masonry                                         1441/1
Timber                                          1441/1




                                         Page 189 of 405

								
To top