THEATER MEDICAL INFORMATION PROGRAM-JOINT (TMIP-J) SYSTEM

Document Sample
THEATER MEDICAL INFORMATION PROGRAM-JOINT (TMIP-J) SYSTEM Powered By Docstoc
					                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                      20 Sep 2008




THEATER MEDICAL INFORMATION PROGRAM-JOINT (TMIP-J)
              SYSTEM ADMINISTRATION
        MODULE 1B: INSTALLATION PROCEDURES
                 INSTRUCTOR GUIDE
                    VERSION 1.1

                   Submitted in Response to:

        D/SIDDOMS III Contract No. W74V8H-04-D-0036
                       Delivery Order 0016
      Theater Medical Information Program – Joint (TMIP-J)
                   Integration Development
                       Deliverable Item 29


                              For:

    Defense Health Information Management System (DHIMS)
                  Lt Col Michael Holmes, USAF
                 5109 Leesburg Pike, Suite 100
                     Falls Church, VA 22041
                   (703) 998-6900, ext. 1103

                              By:

          Science Applications International Corporation
                  Health Solutions Business Unit
     5203 Leesburg Pike, Suite 1300, Falls Church, VA 22041
  Beth Le Duc, TMIP-J Program Manager, Phone: (703) 824-5808
Amy Ward, TMIP-J Deputy Program Manager, Phone: (703) 664-4834
                                                 SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                        20 Sep 2008



REVISION HISTORY

     Date           Document #        Version     Description            Author
08/15/08          D3-TMIP-8018          1.0     Initial submittal   SAIC Training
09/20/08          D3-TMIP-8018A         1.1     Changed order of    SAIC Training
                                                process for B2I




Module 1B: B2 FY07 SP1 Installation      ii                          Instructor Guide
Procedures
                                                                                 SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                                        20 Sep 2008

Table of Contents

   1. Introduction.............................................................................................................. 1
   2. Objectives................................................................................................................. 1
   3. TMIP-J B2 FY07 SP1 Installation................................................................................. 3
      3.1 Pre-requisites for B2 Integrated System ............................................................. 3
      3.2 Installation Instructions for B2I.......................................................................... 4
      3.3 Oracle 10G Database Backup Upgrade Installation ............................................ 10
      3.4 Adobe Reader Installation................................................................................ 22
      3.5 TMIP-J B2 Documentation Installation .............................................................. 22
      3.6 Expeditionary Framework (EF) Upgrade Installation .......................................... 28
      3.7 TMIP Plugins Upgrade Installation.................................................................... 35
      3.8 Micromedex Installation................................................................................... 36
      3.9 AHLTA-Theater (AHLTA-T) Database Updater Installation.................................. 51
      3.10 Business Objects 6.5.1 CHF82 Upgrade Installation ........................................... 58
      3.11 SAMS Upgrade Installation............................................................................... 67
      3.12 B2 Integrated System Uninstall Procedures....................................................... 95
   4. TC2 System Component Installation ........................................................................113
      4.1 TC2 within TMIP-J Installation Wrapper Overview ............................................113
      4.2 Pre-installation Instructions for TC2 System.....................................................115
      4.3 Installation Instructions for TC2 System ..........................................................115
      4.4 Uninstall Instructions for TC2 System ..............................................................148
   5. Student Evaluation .................................................................................................163
      5.1 Skill...............................................................................................................163
   6. Conclusion .............................................................................................................164




Module 1B: B2 FY07 SP1 Installation                            iii                                          Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008

LESSON PLAN FOR MODULE 1B: B2 FY07 SP1 Installation
Procedures
Instructor Preparation Guidelines

Prior to conducting this module, ensure the students’ PCs have the four required Windows
components installed including Windows XP Professional Service Pack 2 (SP2), Message
Queuing (MSMQ) 3.0, Internet Explorer 6.0 SP2, and Web Services 2.0 SP3. Installation of the
Windows Foundation Software was addressed in Module 1A. Additionally, ensure the current
versions of TMIP-J installation CDs are available.

Estimated Time

The estimated time for this module is four hours. It may be more based on student
participation.

Objectives

At the end of this module, students will be able to install the following seven Foundation
Components and 10 Integrated Software Components without assistance:

   •   Foundation Components:
           .NET Framework
           Microsoft Web Services Enhancements
           Adobe Reader 8
           Oracle
           Microsoft Office XP
           Netscape Navigator
           TMIP-J Documentation
   •   Integrated Software Components:
           AHLTA Warrior
           TMIP-J B2 Utilities
           Expeditionary Framework
           Micromedex
           AHLTA-Theater (AHLTA-T)
           MEDIC
           PlexusD
           SAMS
           Business Objects
   •   TC2 System Upgrades
           Pre-Installation
           Installation
           TMIP-J Documentation
           TC2 Upgrade




Module 1B: B2 FY07 SP1 Installation             iv                               Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008

Student Evaluation

At the end of this module, students will have successfully completed the installation of all
Foundation and Integrated Software Components.




Module 1B: B2 FY07 SP1 Installation              v                                Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008

1.       Introduction

         TMIP-J is a suite of applications designed to work
         with one another through various communications                     Instructor Notes
         paths. Because of the various requirements these                    Provide the students
         applications have, there are a number of                            with an overview of
         prerequisite pieces of software that must be                        the three parts of
         installed.                                                          the installation
                                                                             process.
         In Module 1A, four required Windows Foundation
         Software components were installed including
         Windows XP Professional Edition SP2, Message
         Queuing (MSMQ) 3.0, Internet Explorer 6.0 SP2,
         and Web Services 2.0 SP3.

         In this module, we will cover the installation of
         several TMIP-J Foundation component software
         applications. These applications need to be
         installed before the installation of any TMIP-J
         applications.



2.       Objectives

         At the end of this module, students will be able to
         install the following Foundation and Integrated
         Software Components without assistance.

     •   Foundation Components
             .NET Framework
             Microsoft Web Services Enhancements
             Adobe Reader 8
             Oracle
             Microsoft Office XP
             Netscape Navigator
             TMIP-J Documentation
     •   Integrated Software Components
             AHLTA Warrior
             TMIP-J B2 Utilities
             Expeditionary Framework
             Micromedex
             AHLTA-Theater (AHLTA-T)
             MEDIC
             PlexusD
             SAMS
             Business Objects



Module 1B: B2 FY07 SP1 Installation               1                              Instructor Guide
Procedures
                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                 20 Sep 2008

   •   TC2 System Upgrades
          Pre-Installation
          Installation
          TMIP-J Documentation
          TC2 Upgrade




Module 1B: B2 FY07 SP1 Installation   2                     Instructor Guide
Procedures
                                                                    SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                           20 Sep 2008

3.          TMIP-J B2 FY07 SP1 Installation

            Once system prerequisite items are completed, the
            TMIP-J B2 FY07 SP1 upgrade installation wrapper
            can be run. The following steps detail using the
            Installation Wrapper to launch the install of each of
            the TMIP-J Foundation and Integrated Software
            Components.

            IMPORTANT: Installation MUST occur with an
            Administration user and must NOT be renamed. If
            a modified administrator user name is used, the
            software will NOT run.

            3.1      Pre-requisites for B2 Integrated System

            Prior to the installation of the updated TMIP B2
            SP07 SP1 software using the Installation Wrapper,
            it is necessary to ensure the following pre-
            requisites are met. These are:

       i.         The user has administrative privileges.
      ii.         Minimum System and Free Disk space met.
     iii.         TMIP-J B2 FY07 SP1 has not been installed.
     iv.          Windows administrator account password is known.
      v.          Windows XP Professional or Windows Server 2003 with
                  applicable service packs has been installed.
     vi.          Oracle 10g is present and operational.
     vii.         A minimum of 500 Megabytes (MB) of free disk space is
                  required over the combined drives where the upgrade
                   is being performed.

            Ensure that the Administrator accounts (both
            Windows and Oracle) are active and the passwords
            have not or are not about to expire. Also, the
            SYSTEM Oracle account must be active and the
            password should not be within 1 day of expiration.

            All documentation installed on the B2I system is
            located in D:\Program Files\TMIP\Documentation.

            Log Files are located in the following directory:
            C:\Logs\System.

Warning: In addition to loading the updated documentation, the Document Installer in the
TMIP-J B2 FY07 SP1 wrapper will remove the old TMIP-J Documentation and supporting folder
structure. The installation software will not provide a pop-up warning screen before deleting



Module 1B: B2 FY07 SP1 Installation                   3                               Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008

the old documentation. If there are any documents that the site wants to preserve, please
move those documents to another folder prior to the B2 FY07 SP1 installation.


3.2   Installation Instructions for B2I
       The Installation Wrapper for B2I is installed using a
       DVD. Perform the following steps to begin the
       installation process:

                    Step                         Result

          1. Insert the DVD in        Screen opens displaying
             the DVD drive.           the contents of the DVD.
                                      If auto run doesn’t enable,
                                      locate the DVD in My
                                      Computer.

          Note: If installing from the Network, navigate to My
          Computer, select the DVD drive, and double click
          setup.exe. The Install Wizard screen displays.

          2. The system will          Warning screen displays
             automatically            as shown in Figure 1B -
             advance. User input      3-1.
             is not necessary.




                                 3

Figure 1B - 3-1. TMIP B2 FY07 SP1 InstallShield Wizard Screen



                    Step                         Result

          3. Close all TMIP           The Department of
             applications and         Defense Computer
             click OK.                System Privacy Act
             See Figure 1B - 3-1.     Warning screen displays
                                      as shown in Figure 1B -
                                      3-2.




Module 1B: B2 FY07 SP1 Installation             4                                Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                4




                                                             5

Figure 1B - 3-2. Department of Defense Computer System Privacy Act Screen



                    Step                       Result

          4. Read and select I        Radio button selected as
             understand and           shown in Figure 1B - 3-2.
             accept these
             conditions radio
             button.
             See Figure 1B - 3-2.

          5. Click Next.              The TMIP B2 FY07 SP1
             See Figure 1B - 3-2.     Welcome screen displays
                                      as shown in Figure 1B -
                                      3-3.




Module 1B: B2 FY07 SP1 Installation            5                             Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                                                           6

Figure 1B - 3-3. TMIP B2 FY07 SP1 InstallShield Welcome Screen



                    Step                        Result

          6. Click Next.              The Installing TMIP
             See Figure 1B - 3-3.     Components screen
                                      displays as shown in
                                      Figure 1B - 3-4.

          Note: If installing from DVD, prompts appear
          instructing you to insert appropriate DVD. Follow the
          on-screen prompts from The Install Wizards.




Module 1B: B2 FY07 SP1 Installation            6                               Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008


         Step                         Result
 1. The TMIP B2             2. No user interaction is
    FY07 SP1 Setup             required.
    Status screen will
    temporarily display
    Figure 1B - 3-4.

 3. Drive Space Requirements screen Figure 1B -
    3-5, may or may not display depending on
    system configurations and amount of free space.

 4. Click Next.




Figure 1B - 3-4. TMIP B2 FY07 SP1 Setup Status Screen




Module 1B: B2 FY07 SP1 Installation            7                          Instructor Guide
Procedures
                                                      SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                             20 Sep 2008




                                                                 4

Figure 1B - 3-5 TMIP B2 FY07 SP1 Drive Space Requirements




Module 1B: B2 FY07 SP1 Installation        8                            Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                                                   5

Figure 1B - 3-6. Installing TMIP Components Screen


                    Step                       Result

          Note: Items install in the order they appear on the
          Current Settings list.
           5. Click Next.             InstallShield Wizard for
              See Figure 1B -         Oracle 10G Database
              3-6.                    Backup Setup screen
                                      displays as shown in
                                      Figure 1B - 3-7. This is
                                      the first item to install.




Module 1B: B2 FY07 SP1 Installation            9                             Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008

3.3   Oracle 10G Database Backup Upgrade Installation
       The Oracle 10G upgrade is next in the B2I
       installation process. This upgrade takes
       approximately 30 minutes to 1 hour to complete.

       Follow these steps to install Oracle 10G
       Database Backup Upgrade:




Figure 1B - 3-7. Preparing to Install Oracle 10G Database Backup Screen


                   Step                           Result

          1. Allow the system to      Once finished, the
             progress. User           InstallShield Wizard
             action is not            Welcome screen displays
             required.                as shown in Figure 1B -
             See Figure 1B - 3-7 .    3-8.




Module 1B: B2 FY07 SP1 Installation          10                              Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                                      2




Figure 1B - 3-8. Oracle 10G Database Backup InstallShield Wizard Screen


                   Step                        Result

           2. Click Next.             The Oracle 10G
              See Figure 1B -         Database Backup
              3-8.                    Folder screen displays as
                                      shown in Figure 1B - 3-9

          Note: Installation path for the Backup Oracle
          Database and Application Files should read,
          <partition>:\OracleBackup where <partition> is
          the partition where the component is located. It is
          recommended the E partition (default location) for
          Oracle 10G.




Module 1B: B2 FY07 SP1 Installation           11                             Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




                                                   3




Figure 1B - 3-9. Oracle 10G Database Backup Folder Screen


                   Step                       Result

           3. Click Next.             Oracle SYS User Name
              See Figure 1B -         and Password screen
              3-9.                    displays as shown in
                                      Figure 1B - 3-10.




Module 1B: B2 FY07 SP1 Installation          12                           Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                        4




                                                    5




Figure 1B - 3-10. Oracle SYS User Name and Password Screen


                   Step                        Result

          4. Type Oracle              Password displays as ****.
             password SYSDBA
             in the Password
             field.

          Note: The Oracle password is obtained from the
          TSID.

          5. Click Next.              The Ready to Install the
             See Figure 1B -          Program screen displays
             3-10.                    as shown in Figure 1B -
                                      3-11.




Module 1B: B2 FY07 SP1 Installation           13                              Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                                                   6




Figure 1B - 3-11. Ready to Install Oracle 10G Database Backup Screen


                   Step                       Result

          6. Click Install.           The Oracle 10G
             See Figure 1B -          Database Backup
             3-11.                    Ready to Install the
                                      Program status screen
                                      displays as shown in
                                      Figure 1B - 3-12.




Module 1B: B2 FY07 SP1 Installation          14                            Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




Figure 1B - 3-12. Oracle 10G Database Backup Status Screen


                   Step                        Result

           7. Allow system to         As each item is installed
              progress                the progress screen
              automatically. User     displays as shown in
              action is not           Figure 1B - 3-13. Once the
              required.               installation is complete,
              See Figure 1B -         the InstallShied Wizard
              3-12.                   Completed screen
                                      displays as shown in
                                      Figure 1B - 3-14.




Figure 1B - 3-13. Progress Screen

Module 1B: B2 FY07 SP1 Installation           15                             Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                                   8




Figure 1B - 3-14. Microsoft .Net Framework 1.1 Hotfix Install Screen


                   Step                        Result

           8. Click Finish.           The Preparing to Install
              See Figure 1B -         Oracle 10G April 2008
              3-14.                   CPU Setup screen
                                      displays as shown in
                                      Figure 1B - 3-15.




Module 1B: B2 FY07 SP1 Installation           16                            Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




Figure 1B - 3-15. Preparing to Install Oracle 10G April 2008 CPU Setup Screen


                   Step                       Result

           9. Allow the system to     The Welcome to the
              advance without         InstallShield Wizard for
              user interaction.       TMIP Oracle 10G April
              See Figure 1B -         2008 CPU screen displays
              3-15.                   as shown in Figure 1B -
                                      3-16.




Module 1B: B2 FY07 SP1 Installation          17                             Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                                                   10




Figure 1B - 3-16. Oracle 10G April 2008 CPU Welcome Screen


                   Step                       Result

           10. Click Next.            The Oracle Sys Use and
               See Figure 1B -        Password screen displays
               3-16.                  as shown in Figure 1B -
                                      3-17.




Module 1B: B2 FY07 SP1 Installation          18                            Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                                                         11




                                                   12




Figure 1B - 3-17. Oracle SYS User and Password Screen


                   Step                        Result

           11. Enter Oracle
               Password

           12. Click Next.            Ready to Install the
               See Figure 1B -        Program screen displays
               3-17.                  as shown in Figure 1B -
                                      3-18.




Module 1B: B2 FY07 SP1 Installation           19                           Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                                   13




Figure 1B - 3-18. Ready to Install Oracle 10G April 2008 CPU Screen


                   Step                        Result

          13. Click Install.          Installing TMIP Oracle
              See Figure 1B -         10G April 2008 CPU
              3-18.                   status screen displays as
                                      shown in Figure 1B - 3-19.

          14. The system              When finished,
              advances without        InstallShield Wizard
              user interaction.       Completed screen
                                      displays as shown in
                                      Figure 1B - 3-20.




Module 1B: B2 FY07 SP1 Installation           20                             Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




Figure 1B - 3-19. Microsoft .Net Framework 2.0 Setup Screen




 24                                              15




Figure 1B - 3-20. End-User License Agreement Screen


Module 1B: B2 FY07 SP1 Installation         21                            Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008


                    Step                        Result

            15. Click Finish.         Adobe Reader
                See Figure 1B -       Installation screen
                3-20.                 displays as shown in
                                      Figure 1B - 3-21. This
                                      begins the next step in the
                                      install process.

3.4   Adobe Reader Installation
The next item that installs is Adobe Reader 8.1.2. The system advances automatically. No
user interaction is required during the install of Adobe Reader as shown is Figure 1B-24 . When
completed the TMIP-J B2 Documentation install begins.




Figure 1B - 3-21. Installing Components Screen


3.5   TMIP-J B2 Documentation Installation
       The next item to install is the TMIP B2
       Documentation. This is a Mandatory Foundation
       item that will always be installed. After the
       directory is located by the system; the TMIP-J B2
       Documentation Welcome screen displays as
       shown in Figure 1B - 3-22.




Module 1B: B2 FY07 SP1 Installation            22                              Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008

       Follow these steps to install TMIP-J B2
       Documentation:




                                                       7




Figure 1B - 3-22. Install Wizard for TMIP-J B2 Documentation Screen


                    Step                          Result

           6. Click Next.             The Choose Destination
              See Figure 1B -         Location screen appears
              3-22.                   as shown in Figure 1B -
                                      3-23.




Module 1B: B2 FY07 SP1 Installation              23                          Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                                                    8




Figure 1B - 3-23. Choose Destination Location Screen


                   Step                       Result

           7. Click Next.             The Ready to Install the
              See Figure 1B -         Program screen appears
              3-23.                   as shown in Figure 1B -
                                      3-24.




Module 1B: B2 FY07 SP1 Installation          24                            Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




                                                    9




Figure 1B - 3-24. Ready to Install the Program Screen




Module 1B: B2 FY07 SP1 Installation         25                            Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008


                   Step                         Result

           8. Click Install.          The Setup Status
              See Figure 1B -         progress screen displays
              3-24.                   as shown in Figure 1B -
                                      3-25.




Figure 1B - 3-25. Setup Status Progress Screen


                   Step                         Result

           9. Allow the system to     Once the installation is
              automatically           complete, the
              progress.               InstallShield Wizard
              See Figure 1B -         Completed screen
              3-25.                   displays as shown in
                                      Figure 1B - 3-26.




Module 1B: B2 FY07 SP1 Installation            26                              Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                      11




Figure 1B - 3-26. TMIP-J B2 Documentation Complete Screen


                   Step                         Result

           10. Click Finish.          Checking “Expeditionary
               See Figure 1B -        Framework” screen
               3-26.                  displays as shown in
                                      Figure 1B - 3-27. This
                                      screen will display in the
                                      upper left hand corner of
                                      the window




Module 1B: B2 FY07 SP1 Installation            27                             Instructor Guide
Procedures
                                                                SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                       20 Sep 2008



3.6   Expeditionary Framework (EF) Upgrade Installation
       EF is the next system to install. If your site already
       has EF Core v. 120 installed, EF will not upgrade.
       Skip these steps and continue with TMIP Plugins
       Upgrade Installation in Section 3.7.




Figure 1B - 3-27. Checking Expeditionary Framework Screen


       For training purposes, the EF Upgrade Installation
       will occur. Checking Expeditionary Framework
       screen displays as the process initiates. Allow the
       system to progress to the Welcome to the
       InstallShield Wizard for Expediitionary
       Framwork screen as shown in Figure 1B - 3-28.

       Follow these steps to install EF Upgrade:


                     Step                          Result

          1. Click Next.               EF Installation
             See Figure 1B -           Information screen
             3-28.                     displays as shown in
                                       Figure 1B - 3-29.




Module 1B: B2 FY07 SP1 Installation              28                               Instructor Guide
Procedures
                                                      SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                             20 Sep 2008




                                                 1




Figure 1B - 3-28. Expeditionary Framework Welcome Screen




Module 1B: B2 FY07 SP1 Installation       29                            Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                                   2




Figure 1B - 3-29. EF Installation Information Screen


                   Step                       Result

          2. Click Next.              EF Ready to Install the
             See Figure 1B -          Program screen displays
             3-29.                    as shown in Figure 1B -
                                      3-30.

          Note: If the installation path is not correct, click
          Change and select the correct path. Then, click Next.




Module 1B: B2 FY07 SP1 Installation          30                             Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                     3




Figure 1B - 3-30. EF Ready to Install Screen


                    Step                        Result

          3. Click Install.           EF Status screen displays
             See Figure 1B -          showing the installation
             3-30.                    progress. Figure 1B - 3-31.
                                      Once completed the EF
                                      Groups message window
                                      displays as shown in
                                      Figure 1B - 3-32.




Module 1B: B2 FY07 SP1 Installation            31                             Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




Figure 1B - 3-31. Installing Expeditionary Framework Status Screen


                    Step                        Result

          4. Click No.                EF Group screen displays
             See Figure 1B -          as shown in Figure 1B -
             3-32.                    3-33.

          Note: You want to keep the EF Groups previously
          established. IF you select Yes, you will need to add
          the users back into the EF Groups.




                                4

Figure 1B - 3-32. Uninstall EF Groups Message




Module 1B: B2 FY07 SP1 Installation           32                              Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008


                    Step                        Result

          5. Click Next.              EF Group screen displays
             See Figure 1B -          as shown in Figure 1B -
             3-33.                    3-33.

          Note: You want to keep the EF Groups previously
          established. IF you select Yes, you will need to add
          the users back into the EF Groups.




                                                    5




Figure 1B - 3-33. EF Groups Screen


                    Step                        Result

          6. Click Finish.            EF InstallShield Wizard
             See Figure 1B -          Completed screen
             3-34.                    displays as shown in
                                      Figure 1B - 3-34. TMIP
                                      Plugins Upgrade
                                      Installation screen
                                      displays as shown in
                                      Figure 1B - 3-35




Module 1B: B2 FY07 SP1 Installation           33                              Instructor Guide
Procedures
                                                SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                       20 Sep 2008




                6




                                            6




Figure 1B - 3-34. EF Complete Screen




Module 1B: B2 FY07 SP1 Installation    34                         Instructor Guide
Procedures
                                                                 SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                        20 Sep 2008

3.7   TMIP Plugins Upgrade Installation

       The next step in the installation process is to install
       TMIP Plugins. After EF Updater is completed, the
       Checking TMIP Plugins displays a message
       window initiating the installation. Once the
       initiation process is complete, the Welcome to
       the InstallShield Wizard for TMIP Plugins
       screen displays as shown in
       Figure 1B - 3-35.

       Follow these steps to install TMIP Plugins:




Figure 1B - 3-35. Checking TMIP Plugins Screen


                     Step                         Result

          1. TMIP Plugins               No user input needed.
             status screen              After TMIP Plugins have
             displays                   completed, EF Suite
             See Figure 1B -            Update Manager screen
             3-36.                      appears Figure 1B - 3-37.




Figure 1B - 3-36. Status Screen for TMIP Plugins




Module 1B: B2 FY07 SP1 Installation              35                                Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008


                     Step                      Result

             2. Click Close to
                continue.
                See Figure 1B -
                3-37.




                                                     2

Figure 1B - 3-37. TMIP Plugins Ready to Install Screen



       3.8      Micromedex Installation

       Micromedex is a TMIP-J Component. Your site may
       or may not haven selected to install this
       component. If this item has been installed, the
       Welcome to the Micromedex® Healthcare
       Series Setup Program screen displays after the
       previous component has been installed.

       Follow these steps to install Micromedex:

                     Step                      Result

             1. Click Next.           Software License
                See Figure 1B -       Agreement screen
                3-38.                 displays as shown in
                                      Figure 1B - 3-39.




Module 1B: B2 FY07 SP1 Installation           36                               Instructor Guide
Procedures
                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                      20 Sep 2008




                                      1


Figure 1B - 3-38. Micromedex Welcome Screen




Module 1B: B2 FY07 SP1 Installation       37                     Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                                                         2



Figure 1B - 3-39. Software License Agreement Screen


                   Step                        Result

          2. Read the                 Setup Type screen
             agreement, then          displays as shown in
             click Yes.               Figure 1B - 3-40.
             See Figure 1B -
             3-39.




Module 1B: B2 FY07 SP1 Installation           38                               Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                                   3




                                                       3




Figure 1B - 3-40. Setup Type Screen


                   Step                        Result

          3. Select Stand             Installation Directory
             Alone, then click        screen displays as shown
             Next.                    in Figure 1B - 3-41.
             See Figure 1B -
             3-40.




Module 1B: B2 FY07 SP1 Installation           39                             Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                     4




Figure 1B - 3-41. Installation Directory Screen


                    Step                          Result

          4. Verify the directory     Select Program Folder
             location and click       screen displays as shown
             Next.                    in Figure 1B - 3-42.
             See Figure 1B -
             3-41.

          Note: If the directory path is incorrect, click Browse
          and find the correct path. Then, click Next.




Module 1B: B2 FY07 SP1 Installation            40                             Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                                          5



Figure 1B - 3-42. Select Program Folder Screen


                   Step                        Result

          5. Click Next.              Data Directories screen
             See Figure 1B -          displays as shown in
             3-42.                    Figure 1B - 3-43.




Module 1B: B2 FY07 SP1 Installation           41                           Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                            6



Figure 1B - 3-43. Data Directories Screen


                   Step                          Result

          6. Verify the directory     Subscription Update
             location for the four    screen displays as shown
             Micromedex data          in Figure 1B - 3-44.
             disks and click
             Next.
             See Figure 1B -
             3-43.

          Note: If the directory location is incorrect, click
          Browse and find the correct path. Then, click Next.




Module 1B: B2 FY07 SP1 Installation             42                           Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                                               7




                                                    8




Figure 1B - 3-44. Subscription Update Screen


                   Step                         Result

          7. Ensure I did NOT         Radio button selected.
             receive a
             subscription
             floppy disk radio
             button is selected
             See Figure 1B -
             3-44.

          8. Click Next.              Start Copying Program
             See Figure 1B -          Files screen displays as
             3-44.                    shown in Figure 1B - 3-45.




Module 1B: B2 FY07 SP1 Installation            43                            Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                                 9




Figure 1B - 3-45. Start Copying Program Files Screen


                   Step                       Result

           9. Click Next.             Micromedex
              See Figure 1B -         Healthcare Series
              3-45.                   copying program files
                                      status screen displays
                                      Figure 1B - 3-46. No user
                                      interaction is required.




Module 1B: B2 FY07 SP1 Installation         44                              Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




Figure 1B - 3-46. Micromedex Healthcare Series Screen



                   Step                       Result
                                      Information dialog box
                                      states that the setup has
                                      successful installed the
                                      Micromedex Healthcare
                                      Series program files
                                      Figure 1B - 3-46.

           10. Click OK.              Data Discs screen
               See Figure 1B -        displays Figure 1B -
               3-47                   3-48. Use this screen to
                                      select any data discs that
                                      are to be copied.




Module 1B: B2 FY07 SP1 Installation          45                             Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                                                         10



Figure 1B - 3-47. Information for successfully install Micromedex Healthcare Series Screen



                   Step                       Result
           11. Select A, B, C, and     .
               D.
               See Figure 1B -
               3-48.

           12. Click Next.            Information dialog box
                                      appears as shown in
                                      Figure 1B - 3-49.




Module 1B: B2 FY07 SP1 Installation          46                             Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                            11




                                                     12




Figure 1B - 3-48. Data Disc Screen



         Step                         Result
                             Information dialog
                             box appears as shown in
                             “Please insert
                             Data\Disc A” Figure 1B
                             - 3-49.


   Note: The following three steps are repeated for
      each data disc selected, A, B, C, D.
       For this example only screen shots for
       Data/Disc A are displayed.

 13. Click OK to             Select Data Source
     continue.               selection screen displays
                             as seen in Figure 1B -
                             3-50.




Module 1B: B2 FY07 SP1 Installation             47                          Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                                     13


Figure 1B - 3-49. Information to insert Data\Disc A Screen



         Step                         Result
   Select Path location
   of location of data
   source.
   See Figure 1B - 3-50.

 14. Click OK.                Micromedex
                              Copying CD files
                              screen appears Figure
                              1B - 3-51. No
                              interaction is required.




                                           14




   Figure 1B - 3-50 Select Data Source A Screen


Module 1B: B2 FY07 SP1 Installation             48                          Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




   Figure 1B - 3-51 Copy Status Data File Data\Disc A Screen



         Step                         Result
                              Information dialog
                              box states, “If you
                              need more
                              information… Figure
                              1B - 3-52.



 15. Click OK.                Setup Complete for
                              installing screen
                              appears Figure 1B -
                              3-53.




Module 1B: B2 FY07 SP1 Installation            49                         Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008




                                       15

Figure 1B - 3-52. Information for Technical Support Screen



         Step                         Result
 16. Click Finish to          Setup Status for
     complete setup.          installing screen
                              appears Figure 1B -
                              3-54. No user
                              interaction is required.




                                                         16




Figure 1B - 3-53. Setup Complete Screen



Module 1B: B2 FY07 SP1 Installation            50                               Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008




         Step                         Result
 17. No user interaction       Setup Status for
     is required.              installing screen
                               appears Figure 1B -
                               3-54.




Figure 1B - 3-54. Micromedex Shutoff Extension Setup Status Screen


3.9   AHLTA-Theater (AHLTA-T) Database Updater Installation
       ALTHA-T is a TMIP-J Component. Your site may or
       may not have selected to install this component. If
       this item is installed at your site, this update will
       run. The AHLTA-Database Update – Welcome
       InstallShield Wizard screen display as shown in
       Figure 1B - 3-55.

Note: There will be instances within the steps of this
      section when the Oracle password will be needed
      to complete the install. This password is provided
      in the TMIP-J TSID distributed separately.


Module 1B: B2 FY07 SP1 Installation             51                               Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008

Follow these steps to install AHLTA-T Database Updater:

          1. Click Next on the        AHLTA-T Database
             Welcome screen.          Updater - Oracle
             See Figure 1B -          Connection Information
             3-55.                    screen displays as shown
                                      in Figure 1B - 3-56.




                                                      1




Figure 1B - 3-55.Installing Components Screen



                    Step                       Result

           2. Enter the Oracle        Entered data display as
              Password, in the        shown in Figure 1B - 3-56.
              Password fields
              See Figure 1B -
              3-56.

          Note: Obtain the Password from the TSID.

           3. Click Next.             The Data Migration
              See Figure 1B -         Warning screen displays
              3-56.                   as shown in Figure 1B -


Module 1B: B2 FY07 SP1 Installation           52                             Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008


                    Step                        Result
                                      3-57.




                             2




                                      3




Figure 1B - 3-56. Setup Complete Screen


                    Step                        Result

            4. Click OK.              AHLTA-T Theater Data
               See Figure 1B -        Migration Manager
               3-57.                  screen displays as shown
                                      in Figure 1B - 3-58.
Note: The installation will not proceed until the OK button on
this screen has been selected.




Module 1B: B2 FY07 SP1 Installation            53                             Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




             4



Figure 1B - 3-57. Microsoft .Net Framework 3.0 Welcome to Setup Screen


                   Step                       Result

           5. Allow system to         DOS Command window
              advance.                displays as shown in
                                      Figure 1B - 3-59. When
                                      done, the AHLTA-
                                      Theater Complete dialog
                                      box displays as shown in
                                      Figure 1B - 3-59.




Module 1B: B2 FY07 SP1 Installation          54                            Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




Figure 1B - 3-58. AHLTA-Theater Data Migration Manager Screen




Figure 1B - 3-59. DOS Command Window


                   Step                       Result

          6. Click OK.                The InstallShield
             See Figure 1B -          Wizard Completed


Module 1B: B2 FY07 SP1 Installation          55                             Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008


                        Step                     Result
                3-60.                  screen displays as shown
                                       in Figure 1B - 3-61.

            Note: Use the View Log button if there are questions
            or errors from the installation. This accesses the log
            file. Notify the MHS Help Desk if errors occur. Provide
            the details from the log file.




        6


Figure 1B - 3-60. AHLTA-Theater Complete Screen


                        Step                     Result

            7. AHLTA-T                 The system progresses
               Database Updater        without user interaction.
               screen appears          AHLTA-Theater Update
               See Figure 1B -         successfully installed
               3-61.                   screen displays as shown
                                       in Figure 1B - 3-61.




Module 1B: B2 FY07 SP1 Installation             56                              Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                        7




Figure 1B - 3-61. AHLTA-T Database Updater Complete Screen


                   Step                        Result

          8. Next, AHLTA              There is no user
             Theater Global           interaction required.
             Information screen       AHLTA Theater Update
             displays.                dialog box screen displays
             See Figure 1B -          as shown in Error!
             3-62.                    Reference source not
                                      found..




Module 1B: B2 FY07 SP1 Installation           57                              Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




Figure 1B - 3-62. AHLTA-Theater Screen


3.10 Business Objects 6.5.1 CHF82 Upgrade Installation
Business Objects 6.5.1 CHF82 Update is the next
component to install. After SAMS 9 Database is installed,
the Business Objects 6.5.1 Prepare to Install screen
displays as shown in Figure 1B - 3-63.

Follow these steps to install Business Objects:

                     Step                          Result

            1. No user action is       TMIP B2 Business
               required. Allow         Objects 6.5.1 CHF82
               system to advance.      Update - Welcome
               See Figure 1B -         screen displays as shown
               3-63.                   in Figure 1B - 3-64.




Module 1B: B2 FY07 SP1 Installation               58                          Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




Figure 1B - 3-63. Business Objects Preparing to Install Screen




                                 2



Figure 1B - 3-64. TMIP B2 Business Objects 6.5.1 CHF82 Update Screen


                   Step                        Result

           2. Click Next.             Ready to Install the
              See Figure 1B -         Program screen displays
              3-64.                   as shown in Figure 1B -



Module 1B: B2 FY07 SP1 Installation           59                            Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008


                   Step                         Result
                                      3-65.




                                                     3




Figure 1B - 3-65. Ready to Install the Program Screen


                   Step                         Result

           3. Click Install.          The system advances
              See Figure 1B -         through the installation.
              3-65.                   Then displays the
                                      Business Objects 6.5
                                      CHF82 Update Dialog
                                      as shown in Figure 1B -
                                      3-66.
                                      No user interaction is
                                      required.




Module 1B: B2 FY07 SP1 Installation            60                             Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




Figure 1B - 3-66. Ready to Install the Program Screen



                    Step                         Result

            4. Business Objects         This screen asks the user
               6.5 CHEF82               if they want to remove
               Update dialog            files that were put onto
               box appears.             the computer during
               See Figure 1B -          installation. These files
               3-67.                    are not required for the
                                        Business Object
                                        application to function,
                                        but will be needed to
                                        uninstall Business
                                        Objects.

 Click Yes to remove files.
 This will free up disk space, but the user will need the
 installation media to uninstall Business Objects.
 Click No to leave files on computer. This will free up disk
 space, but the user will need the installation media to uninstall
 Business Objects.




Module 1B: B2 FY07 SP1 Installation             61                             Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




             5

Figure 1B - 3-67. Business Objects Dialog Box


                   Step                         Result

           5. Click Yes.              The TMIP B2 Business
              See Figure 1B -         Objects 6.5.1 CHF82
              3-67.                   Update – InstallShield
                                      Wizard Completed
                                      screen displays as shown
                                      in Figure 1B - 3-68.




                                                   6




Figure 1B - 3-68. Business Objects 6.5.1 CHF82 Update Completed Screen

Module 1B: B2 FY07 SP1 Installation           62                             Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008



                    Step                      Result

           6. Click Finish.           Business Objects
              See Figure 1B -         Content Update
              3-68.                   Welcome screen displays
                                      as shown in Figure 1B -
                                      3-69.




                                                  7




Figure 1B - 3-69. TMIP B2 BO Content Update Welcome Screen


                   Step                       Result

           7. Click Next.             Oracle SYS User Name
              See Figure 1B -         and Password screen
              3-69.                   displays as shown in
                                      Figure 1B - 3-70.




Module 1B: B2 FY07 SP1 Installation          63                            Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                                                         8




                                                    9




Figure 1B - 3-70. Oracle SYS User Name and Password Screen


                   Step                        Result

           8. Enter Password.         Enter the Oracle Password
              See Figure 1B -         for SYSDBA. This
              3-70.                   information can be found
                                      in the TSID.

           9. Click Next.             Oracle SYSTEM User
                                      Name and Password
                                      screen displays as shown
                                      in Figure 1B - 3-71.




Module 1B: B2 FY07 SP1 Installation           64                               Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                         10




Figure 1B - 3-71. Oracle SYSTEM User Name and Password Screen



                   Step                        Result

           10. Click Next.            Enter the Oracle Password
               See Figure 1B -        for SYSDBA. This
               3-70.                  information can be found
                                      in the TSID.
                                      Ready to Install the
                                      Program screen displays
                                      as shown in Figure 1B -
                                      3-72.




Module 1B: B2 FY07 SP1 Installation           65                            Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                             11




Figure 1B - 3-72. Ready to Install TMIP B2 BO Content Update Screen


                   Step                           Result

           11. Click Install.         The system progresses
               See Figure 1B -        with the install showing a
               3-72.                  status bar. This continues
                                      until the InstallShield
                                      Wizard Completed
                                      screen displays as shown
                                      in Figure 1B - 3-73.




Module 1B: B2 FY07 SP1 Installation            66                             Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                                                   11




Figure 1B - 3-73. InstallShield Wizard Completed Screen


                    Step                       Result

           12. Click Finish.          Oracle 10G Recompile –
               See Figure 1B -        Welcome to the
               3-73.                  InstallShield Wizard
                                      screen displays as shown
                                      in Figure 1B - 3-90.


3.11 SAMS Upgrade Installation
       The next item to install is SAMS. After AHLTA-
       Theater is completed the SAMS Installation
       Welcome screen displays.

       Follow these steps to install SAMS:

                    Step                       Result

          1. Click Next.              SAMS – License
             See Figure 1B -          Agreement screen
             3-74.                    displays as shown in
                                      Figure 1B - 3-75.



Module 1B: B2 FY07 SP1 Installation           67                               Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                                       1




Figure 1B - 3-74. SAMS Welcome Screen




                   Step                       Result

          2. Read and then
             acknowledge the
             license agreement
             by selecting I
             accept the terms
             of the license
             agreement radio
             button.


          3. Click Next.              SAMS – PEM
             See Figure 1B -          Configuration screen
             3-75.                    displays as shown in
                                      Figure 1B - 3-76.




Module 1B: B2 FY07 SP1 Installation          68                              Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




                                       2
                                                    3




Figure 1B - 3-75. License Agreement Screen




         Step                         Result

 4. Select the            Build Strategy screen
    appropriate           displays Figure 1B - 3-77.
    Encounter
    Module. Then,
    click Next.
    See Figure 1B -
    3-76.




Module 1B: B2 FY07 SP1 Installation            69                         Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008




                                  4




                                                        4




Figure 1B - 3-76. SAMS – PEM Configuration Screen




                   Step                          Result

           5. Select Upgrade
              from
              029.09.01.00R2
              radio button.
              See Figure 1B -
              3-77.

           6. Select Next.            SAMS 9 Database
                                      Oracle SID screen
                                      appears as shown in
                                      Figure 1B - 3-78.
               Warning: User must select the Upgrade option
               on this screen Figure 1B - 3-77. A known issue
               exists with selecting the Clean (full) build option.




Module 1B: B2 FY07 SP1 Installation             70                              Instructor Guide
Procedures
                                                   SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                          20 Sep 2008




                                      5




                                          6




Figure 1B - 3-77. Build Strategy Screen




Module 1B: B2 FY07 SP1 Installation           71                     Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                     Step                      Result

          7. Enter LDB in the         Oracle account SYS
             Oracle SID field.        screen displays as shown
             Then, click Next.        in Figure 1B - 3-79.
             See Figure 1B -
             3-78.




                 7




                                                     7




Figure 1B - 3-78. Oracle SID Screen




                     Step                      Result

           8. Enter and Re-           Oracle account SAMS
              enter the               screen displays as shown
              Password. Then,         in Figure 1B - 3-80.
              click Next.


Module 1B: B2 FY07 SP1 Installation           72                             Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008


                   Step                        Result
               See Figure 1B -
               3-79.




                             8




                                                   8




Figure 1B - 3-79. Oracle Account SYS Password Screen


                   Step                        Result

           9. Enter and Re-           Ready to Install the
              enter the               Program screen displays
              Password. Then,         as shown in Figure 1B -
              click Next.             3-81.
              See Figure 1B -
              3-80.




Module 1B: B2 FY07 SP1 Installation           73                           Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                            9




                                                     9




Figure 1B - 3-80. TMIP Schemas Account Password Screen


                   Step                          Result

           10. Click Install.         Continue or abort
               See Figure 1B -        install screen displays as
               3-81.                  shown in Figure 1B - 3-82.




Module 1B: B2 FY07 SP1 Installation             74                           Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                                     10




Figure 1B - 3-81. SAMS 9 Database Ready to Install Program Screen




   11




Figure 1B - 3-82. Continue or Abort Install Screen


                    Step                      Result

           11. Click Yes.             Note: Do not close the
               See Figure 1B -        minimized DOS window
               3-82.                  while the database
                                      installation scripts are
                                      running.
                                      If the DOS window is
                                      closed while running
                                      the installation, an
                                      error will occur as
                                      shown in Figure 1B -

Module 1B: B2 FY07 SP1 Installation          75                             Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008


                   Step                        Result
                                      3-84.
Note: SAMS Database dialog box could display behind DOS
screen Figure 1B - 3-83. No user interaction is required.




Figure 1B - 3-83 Executing SAMS Database Upgrade Scripts Screen




Figure 1B - 3-84. SAMs 9 Database Error Screen


                   Step                        Result

           12. System                 SAMS 9 Database
               automatically          InstallShield Wizard
               advances.              Complete screen displays
                                      as shown in Figure 1B -
                                      3-85.




Module 1B: B2 FY07 SP1 Installation           76                            Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                                                    13




Figure 1B - 3-85. SAMS 9 Database Installation Complete Screen



                   Step                       Result

           13. Click Finish.          SAMS – Welcome to the
               See in Figure 1B -     InstallShield Wizard for
               3-85.                  SAMS 9 screen appears
                                      Figure 1B - 3-86.




Module 1B: B2 FY07 SP1 Installation          77                            Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                                                        14




Figure 1B - 3-86. SAMS 9 Welcome Screen




                   Step                        Result

           14. Click Next.            SAMS – PEM
               See Figure 1B -        Configuration screen
               3-86.                  appears Figure 1B - 3-87.




Module 1B: B2 FY07 SP1 Installation           78                               Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                             15




                                           16




Figure 1B - 3-87. SAMS PEM Configuration Screen


                   Step                      Result

           15. Select AHLTA-
               Theater.
               See Figure 1B -
                3-87.

           16. Click Next.            SAMS – Setup Status
                                      screen appears Figure 1B
                                      - 3-88. There is no user
                                      interaction required.


        Note: Only Select SAMS Medical Encounters if you
        are ONLY running SAMS.




Module 1B: B2 FY07 SP1 Installation         79                             Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




Figure 1B - 3-88 SAMS Setup Status Screen


                   Step                       Result

           17. SAMS Update
               Complete screen
               appears. See
               Figure 1B - 3-89.

           18. Click Finish.          Business Objects 6.5.1
                                      CHF82 Upgrade
                                      Installation Setup
                                      Figure 1B - 3-63 screen
                                      appears next.




Module 1B: B2 FY07 SP1 Installation          80                            Instructor Guide
Procedures
                                                SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                       20 Sep 2008




                                         18




Figure 1B - 3-89. SAMS Update Complete Screen




Module 1B: B2 FY07 SP1 Installation       81                      Instructor Guide
Procedures
                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                  20 Sep 2008




Module 1B: B2 FY07 SP1 Installation   82                     Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008



3.11.1 Oracle 10G Recompile




                                             1




Figure 1B - 3-90. Welcome to the InstallShield Wizard for Oracle 10G Recompile Screen



                   Step                       Result

           1. Click Next to           Oracle 10G Recompile –
              continue.               Oracle SYS User Name
              See Figure 1B -         and Password screen
              3-90.                   displays as shown in
                                      Figure 1B - 3-91.




Module 1B: B2 FY07 SP1 Installation          83                            Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                        2




                                               3




       Figure 1B - 3-91. Oracle SYS User Name and Password Screen



                   Step                        Result

           2. Enter Oracle
              Password.
              See Figure 1B -
              3-91.

           3. Click Next.             Oracle 10G Recompile
              See Figure 1B -         Ready to Install the
              3-91.                   Program screen displays
                                      as shown in Figure 1B -
                                      3-92.




Module 1B: B2 FY07 SP1 Installation           84                              Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




                                                  4




       Figure 1B - 3-92. Oracle 10G Recompile Ready to Install Program Screen


                   Step                       Result

           4. Click Install.          Oracle 10G Recompile –
              See Figure 1B -         Install Oracle 10G
              3-92.                   Recompile screen
                                      displays as shown in
                                      Figure 1B - 3-93. No
                                      interaction by user is
                                      required.




Module 1B: B2 FY07 SP1 Installation          85                           Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




       Figure 1B - 3-93. Oracle 10G Recompile Installing Screen

                   Step                        Result

                                      Oracle 10G Recompile –
                                      Installed Wizard
                                      Completed screen
                                      displays as shown in
                                      Figure 1B - 3-94.

           5. Click Finish.           EF NCF Installer
              See Figure 1B -         Upgrade screen displays
              3-94.                   as shown in Figure 1B -
                                      3-95.




Module 1B: B2 FY07 SP1 Installation           86                            Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                                                         5




       Figure 1B - 3-94. Oracle 10G Recompile InstallShield Wizard Completed Screen



3.11.2 EF NCF Installer Upgrade


         Step                         Result

 1. The Installing EF     This screen will remain
    NCFs screen           during the NCF installation.
    appears in the left   No user interaction is
    upper-hand corner     required during the EF NCF
    of the window.        Installation.
    See Figure 1B -
    3-95.




Figure 1B - 3-95 Installing EF NCFs Screen.


Module 1B: B2 FY07 SP1 Installation            87                              Instructor Guide
Procedures
                                                    SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                           20 Sep 2008




         Step                         Result

 2. TMIP-J B2:
    Select
    Connecting
    System screen
    appears.
    See Figure 1B -
    3-96.

 3. Select the
    system(s) that your
    computer will be
    connecting to, or
    select None.

 4. Click Next.




Module 1B: B2 FY07 SP1 Installation            88                     Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                3




                                                                 4
                    Figure 1B - 3-96. Connecting System Selections Screen




Module 1B: B2 FY07 SP1 Installation          89                             Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008


3.11.3 Final Installation Steps


         Step                         Result

 1. TMIP-J B2 FY07
    SP1 Application
    Suite Component
    status screen
    appears.
    See Figure 1B -
    3-97.

 2. Click Next.           TMIP B2 FY07 SP1
    See Figure 1B -       dialog box displays as
    3-97.                 shown in Figure 1B - 3-98.




                                                               2


                   Figure 1B - 3-97. Component Succeeded Status Screen



Module 1B: B2 FY07 SP1 Installation            90                        Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008


         Step                             Result

 3. A dialog box
    appears that asks
    whether to delete
    the Oracle
    database backup
    that was created
    during the install.
    See Figure 1B -
    3-98.

 4. Click Yes to delete          This will free up hard
    the database                 drive space on the
    backup.                      computer.

 5. Click No to retain           Oracle 10G Database
    the database                 Backup status screen
    backup.                      displays as shown in
                                 Figure 1B - 3-99.




                            4



                          Figure 1B - 3-98. Delete Oracle Database Screen



         Step                             Result

 6. The Databases will           TMIP B2 FY07 SP1
    be deleted at this          dialog box displays as
    time.                       shown in Figure 1B -
    See Figure 1B -             3-100.
    3-99.




Module 1B: B2 FY07 SP1 Installation                91                          Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




          Figure 1B - 3-99. Oracle 10G Database Backup Screen



            Step                        Result

 7. You may receive an        TMIP B2 FY07 SP1
    informational            dialog box displays as
    prompt asking            shown in Figure 1B -
    “Would you like          3-100.
    to delete the EF
    database backup
    folder?”
    See Figure 1B -
    3-100.
If you select Yes, then the EF database backup that
was created at the beginning of this installation will be
removed. The database backup was created in the
event that there was a failure during the EF
installation. This prompt only displays when there was
a successful EF installation. This will free up hard drive
space on the computer.
     If you select No, then the database backup will be
retained.




      7


Figure 1B - 3-100. Delete EF Database Backup Prompt




Module 1B: B2 FY07 SP1 Installation               92                           Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008


          Step                        Result

 8. TMIP B2 FY07
    SP1 InstallShield
    Wizard Complete
    screen appears.
    See Figure 1B -
    3-101.

 9. Select Yes, I want
    to restart my
    computer now.
Note: It is recommended to reboot the system at the
end of the installations. The installer should follow
local Standard Operating Procedures (SOPs) to bring
the system back on-line.


 10. Click Finish.




Module 1B: B2 FY07 SP1 Installation            93                         Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008




                        8




                                                                     10


     Figure 1B - 3-101. TMIP B2 FY07 SP1 InstallShield Wizard Complete Screen




Module 1B: B2 FY07 SP1 Installation        94                             Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008


3.12 B2 Integrated System Uninstall Procedures
       The TMIP-J B2 FY07 SP1 Installation Wrapper has
       a Maintenance screen that has two options:

              Modify

              Remove

       Use the Modify option on the Maintenance screen
       to remove selected components. This option also
       allows you to install/upgrade a Component that has
       not been previously installed/upgraded.

       Use the Remove option on the Maintenance
       screen to uninstall EF components, as well as,
       TMIP Documentation and the Install Wrapper.

       This section describes using the Remove option to
       uninstall all installed features of TMIP-J.

       The following B2I Components will NOT be
       uninstalled using the Remove option:

              ActiveSync (this can only be uninstalled via the Add/Remove Programs but is not
              advisable. The AHLTA Mobile application relies on ActiveSync v4.2 to properly
              interact with the AHLTA-Theater application.)
              .NET Framework 1.1
              .NET Framework 1.1 SP1
              .NET Framework 1.1 Hotfix 886903
              .NET Framework 2.0
              .NET Framework 3.0
              Adobe Reader 8.1.2
              Web Services Extensions
              Windows Installer 3.1




Module 1B: B2 FY07 SP1 Installation           95                              Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008

       Follow these steps to remove components from a
       B2I system:

                   Step                            Result

           1. Select Start from       Start menu displays.
              the Windows
              Desktop.

           2. Highlight All           All Programs highlighted.
              Programs.

           3. Highlight TMIP.         TMIP highlighted.

           4. Select the Remove       Preparing to Setup TMIP
              button.                 B2 FY07 SP1 screen
                                      displays as shown in
                                      Figure 1B - 3-102. Allow the
                                      system to advance. No user
                                      input is required.




Figure 1B - 3-102. Preparing to Setup TMIP Progress Bar Screen



 5. A screen displays     TMI
    reminding the user    P B2 Fy07 SP1 dialog
    to ensure all TMIP    screen is display as shown in
    applications are      Figure 1B - 3-103
    closed before
    continuing

 6. Click OK.             Privacy Act Warning
                          screen as shown in Figure
                          1B - 3-104




Module 1B: B2 FY07 SP1 Installation           96                               Instructor Guide
Procedures
                                                                SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                       20 Sep 2008




                                 6

Figure 1B - 3-103. Close Application Reminder Screen




                                                            7

Figure 1B - 3-104. DoD Computer System Privacy Act Screen


                   Step                            Result

           7. Select I                TMIP B2 FY07 SP1
              understand and          Maintenance Welcome
              accept these            screen displays as shown in
              conditions radio        Figure 1B - 3-105.
              button and click
              Next.
              See Figure 1B -
              3-104.




Module 1B: B2 FY07 SP1 Installation           97                                  Instructor Guide
Procedures
                                                                SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                       20 Sep 2008




                 8




                                                            8

Figure 1B - 3-105. TMIP B2 FY07 SP1 Maintenance Welcome Screen


                     Step                          Result

           8. Click the Remove        Question window displays as
              radio button, and       shown in Figure 1B - 3-106.
              click Next.
              See Figure 1B -
              3-105.




             9

Figure 1B - 3-106. Question Window




Module 1B: B2 FY07 SP1 Installation           98                                  Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008


                   Step                             Result

           9. Click Yes.              A screen displays listing all
              See Figure 1B -         TMIP-J Components that will
              3-106.                  be uninstalled as shown in
                                      Figure 1B - 3-107.

           10. Click Yes.             Uninstall EF NCF window
               See Figure 1B -        displays as shown in Figure
               3-107.                 1B - 3-108.




                          10




Figure 1B - 3-107. Uninstall TMIP Component List Screen



3.12.1 Uninstall EF NCF


                   Step                         Result
Prior to the uninstallation, Windows Installer screen appears
asking “Are you sure you want to uninstall this product?”




      1

Figure 1B - 3-108. Uninstall Question Window


Module 1B: B2 FY07 SP1 Installation            99                              Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008



                   Step                         Result

           1. Click Yes.              The EF NCF Installer will
              See Figure 1B -         be uninstalled. No user
              3-108.                  interaction is required.



3.12.2 Uninstall Business Objects Update


                   Step                         Result
Prior to the uninstallation, Windows Installer screen appears
asking “Are you sure you want to uninstall this product?”




      1

Figure 1B - 3-109. Uninstall Question Window


                   Step                         Result

           1. Click Yes.              TMIP B2 Business
              See Figure 1B -         Objects 6.5.1 CHF82
              3-109.                  Update screen appears as
                                      shown in Figure 1B -
                                      3-110.
                                      Wait while the process
                                      completes. No user
                                      interaction is required.




Module 1B: B2 FY07 SP1 Installation           100                             Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




Figure 1B - 3-110. Progress Bar Screen


3.12.3 SAMS 9 Uninstallation


                   Step                       Result

           1. Uninstall of SAMS9      SAMS 9 – Program
              commences.              Maintenance screen
                                      appears as shown in
                                      Figure 1B - 3-111.

           2. Select Remove
              radio button.

           3. Click Next.             Screen appears asking
              See Figure 1B -         “You want to
              3-111                   completely remove
                                      selected application
                                      and its components?”

           4. Click OK.               SAMS – InstallShield
                                      Wizard Complete screen
                                      appears. (Screen not
                                      shown)

           5. Click Finish.




Module 1B: B2 FY07 SP1 Installation          101                              Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                  2

                                                        3




Figure 1B - 3-111. Progress Bar Screen - Continued


3.12.4 AHLTA-T Uninstallation


                      Step                     Result

           1. AHLTA-T will be         AHLTA-Theater B2
              uninstalled next.       FY07 SP1d Message box
              See Figure 1B -         asks to continue with the
              3-112.                  uninstall. (Screen not
                                      shown).

           2. Click Yes.              AHLTA-Theater B2
                                      FY07 SP1d progress
                                      screen appears as shown
                                      in Figure 1B - 3-112.




Module 1B: B2 FY07 SP1 Installation          102                              Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




Figure 1B - 3-112. Windows Installer Message Screen




                   Step                        Result

                                      AHLTA Theater Update
                                      screen appears informing
                                      AHLTA-T has been
                                      uninstalled as shown in
                                      Figure 1B - 3-113.

           3. Click OK.




               3

Figure 1B - 3-113 AHLTA-T Uninstall Complete


Module 1B: B2 FY07 SP1 Installation          103                            Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008



3.12.5 Uninstall Micromedex


          Step                         Result

   1. Micromedex will            Confirm File
      be uninstalled             Deletion screen
      next.                      appears as shown in
      See Figure 1B -            See Figure 1B - 3-114
      3-114.

   2. Click Yes.                 Screen appears
                                 showing items to be
                                 removed. Check marks
                                 will be added as items
                                 are removed.

If asked about shared files, click Yes To All. Click OK
when this button becomes enabled.




                             2

       Figure 1B - 3-114 Micromedex Confirm File Deletion Screen




Module 1B: B2 FY07 SP1 Installation             104                         Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008


3.12.6 Uninstall TMIP Plugins


         Step                         Result

 1. TMIP Plugins will      Uninstalling TMIP
    be uninstalled next.   Plugins screen appears as
    See Figure 1B -        shown in Figure 1B - 3-115
    3-115.                 in upper left hand corner
                           of the window.

 2. Click Yes.             Screen appears showing
                           items to be removed.
                           Check marks will be added
                           as items are removed.
                           Screen appears as shown
                           in Figure 1B - 3-116.




Figure 1B - 3-115 Uninstalling TMIP Plugins Screen



         Step                         Result
 3. Prior to the
    uninstallation,
    Windows
    Installer screen
    appears Figure 1B
    - 3-116 asking
    “Are you sure
    you want to
    uninstall this
    product? “

 4. Click Yes to
    continue.




Module 1B: B2 FY07 SP1 Installation            105                        Instructor Guide
Procedures
                                                      SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                             20 Sep 2008




     2

Figure 1B - 3-116 Uninstall Confirmation Screen



         Step                         Result
 5. If you clicked Yes,    No user interaction is
    the TMIP Plugins      needed Figure 1B - 3-117.
    Removal screen
    will appear. The
    status of the
    uninstallation will
    display as it
    progresses




Figure 1B - 3-117 TMIP Plugins Removal Screen




Module 1B: B2 FY07 SP1 Installation            106                      Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008


3.12.7 Uninstall EF


         Step                         Result

 1. EF will be                Prior to the
    uninstalled next.         uninstallation,
    See Figure 1B -           Windows Installer
    3-118.                    screen appears Figure
                              1B - 3-119 asking “Are
                              you sure you want
                              to uninstall this
                              product? “




Figure 1B - 3-118 Uninstalling Expeditionary Framework Notification Screen


         Step                         Result

 2. Click Yes to
    proceed.




    2


Figure 1B - 3-119 Uninstall Confirmation Screen




Module 1B: B2 FY07 SP1 Installation            107                           Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008



         Step                         Result
 3. If you clicked Yes,    No user interaction is
    the EF Removal        needed Figure 1B - 3-120 .
    screen will appear.
    The status of the
    uninstallation will
    display as it
    progresses.




Figure 1B - 3-120 EF Removal Screen


         Step                         Result
 4. Uninstall
    EFGroups? “Do
    you want to
    uninstall
    EFGroups?”
    See Figure 1B -
    3-121.

 5. Click No.




Module 1B: B2 FY07 SP1 Installation            108                       Instructor Guide
Procedures
                                                      SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                             20 Sep 2008




                                        5



Figure 1B - 3-121 Uninstall EFGroups Prompt


3.12.8 Uninstall TMIP-J B2 Documentation


           Step                       Result

 1. TMIP-J B2               TMIP-J B2
    Documentation           Documentation screen
    will be uninstalled     appears asking “Do you
    next.                   want to completely
    See Figure 1B -         remove the selected
    3-122.                  application and all of
                            its features? Figure 1B
                            - 3-122.


 2. Click Yes.




       2

Figure 1B - 3-122 Component Removal Confirmation Screen


           Step                       Result
 3. TMIP-J B2
    Documentation
    Uninstall
    Complete screen
    Figure 1B - 3-123
    appears notifying
    you that the
    documentation
    uninstall is
    complete.



Module 1B: B2 FY07 SP1 Installation            109                      Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008


         Step                         Result
 4. Click Finish.




                                                     4




Figure 1B - 3-123 Documentation Uninstall Complete Screen




Module 1B: B2 FY07 SP1 Installation            110                         Instructor Guide
Procedures
                                                     SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                            20 Sep 2008




3.12.9 Final Uninstall Steps


         Step                         Result

 5. TMIP-J B2
    Documentation
    FY07 SP1
    Uninstall
    Complete screen
    appears.
    See Figure 1B -
    3-124.

 6. Select Yes, I want
    to restart my
    computer now
    radio button.

 7. Click Finish.




Module 1B: B2 FY07 SP1 Installation            111                     Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008




                6




                                                               7

Figure 1B - 3-124 TMIP B2 FY07 SP1 Uninstall Complete Screen




Module 1B: B2 FY07 SP1 Installation       112                            Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008

4.     TC2 System Component Installation

       This section details the steps, within the TMIP-J
       Installation Wrapper, to install each of the
       TMIP-J Foundation and Integrated Software
       Components in a TC2 system environment. This
       section does not list actual CD names/numbers. For
       a list of CD names/numbers, please refer to the
       latest version of the Version Description Document
       (VDD).

       IMPORTANT: Installation MUST occur with an
       Administration user name and must NOT be
       renamed. If a modified administrator user name is
       used, the software will NOT run.

4.1   TC2 within TMIP-J Installation Wrapper Overview
       The Installation Wrapper provides an automated
       process for a more accurate and reliable installation
       with minimal user interaction. The Installation
       Wrapper for TC2 performs the following actions:

       •   Checks system for pre-requisites:
              Windows 2003 Server with SP1 or higher
              Operating System (OS)
              Cache 5.2.0.329.0 running
              2 GB of RAM
              C, L, and M Drives configured
                  150 MG free on C: Drive (for Expeditionary Framework)
                  5 GB free on L: Drive (for packages)
                  15 GB free on M: Drive
                  (for backups and database size differential)
              TC2 Build 1.0.0.3 or higher (CP307)
              CHCSMGR user with administrative privileges running

       •   Checks application for pre-requisites:
              TMIP-J B2 FY07 SP1 not installed
              CHCSMGR logged in
              Cache Controller Service running
              Build 1.0.0.3 installed

       Note: Before upgrade installation is preformed on
       TC2 system, the CHCSMGR account must be active
       and password should not be within one day of
       expiration.




Module 1B: B2 FY07 SP1 Installation            113                               Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008


4.1.1 TC2 System Components
       On the TC2 system, TMIP-J B2 FY07 SP1
       Installation Wrapper installs updates for the
       following components:

       •   TMIP-J CHCS Cache (TC2) Change Packages (CPs)
       •   Data Updates
       •   Utility Updates and Special Software Releases in
           Build 1.0.0.4-1.0.0.5, 1.0.0.7-1.0.0.8
       •   Transportable Computerized Patient Record (TCPR) module
       •   Expeditionary Framework (EF)

       The installation process stops Cache before
       performing a backup for the installation. At no
       other time during this installation process should
       the Cache service be stopped. Failure to follow this
       process causes the installation to fail.

4.1.2 Hardware Requirements for TC2 System
       The minimum and recommended hardware
       requirements for TC2 are:

       •   PC with 1000-MHz processor or 2 1500-MHz or faster
       •   1-4 GB RAM
       •   100 – 150 GB hard-disk space
       •   Other pre-requisite requirements as described in Section 4.1

4.1.3 Location of Log Files Directory for TC2 System
       During installation on the TC2 system, log files are
       located on the C: partition of the OS
       (C:\Logs\System).

       The first log files directory contains a file called
       TMIPB2FY07SP1.log which contains information
       pertaining to the execution of the TMIP-J
       Installation Wrapper.

       The second log file directory contains log files for
       the components installed by the TMIP-J Installation
       Wrapper. Not all components generate log files.
       The number of files depends on the total number
       of components being installed. These log files are
       helpful in troubleshooting errors received during
       the installation process.




Module 1B: B2 FY07 SP1 Installation            114                              Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008

4.1.4 Location of Document File Directory for TC2 System
       During installation on TC2 system, documentation
       files are located in the
       C:\Program Files\TMIP\Documentation
       directory.

4.2   Pre-installation Instructions for TC2 System
       There are a few items to consider prior to installing
       on a TC2 system.

       •   Do not shut down TaskMan on TC2.
       •   Close out any TC2 Terminal screens.
       •   Ensure all users are not using the system prior
           to starting the installation process.

       Two directories are needed for successful TC2
       system installation. Locate these on your system or
       create them if they do not exist.

       •   C:\Program Files\TMIP\Documentation – for all
           TC2 Administrative documentation.
       •   C:\Logs\System – for all TC2 Log Files. This allows MHS to
           locate the log files to resolve problems during TC2 installation.
       •   Ensure that the CHCSMGR accounts (both Windows and Caché) are active and the
           password have not or are not about to expire.

Warning: In addition to loading the updated documentation, the Document Installer in the
TMIP-J B2 FY07 SP1 wrapper will remove the old TMIP-J Documentation and supporting folder
structure. The installation software will not provide a pop-up warning screen before deleting
the old documentation. If there are any documents that the site wants to preserve, please
move those documents to another folder prior to the B2 FY07 SP1 installation.

4.3   Installation Instructions for TC2 System
       TC2 installation occurs from a DVD.

4.3.1 Installing TMIP-J on TC2 System
       Perform the following steps to install TMIP-J on a
       TC2 system:

                    Step                         Result

            1. Insert the first B2    Screen opens displaying
               FY07 SP1 DVD in        the contents of the DVD.
               the DVD drive.         If auto run doesn’t enable,
                                      locate the DVD in My
                                      Computer.


Module 1B: B2 FY07 SP1 Installation            115                               Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008


                    Step                        Result



          Note: If installing from the Network, navigate to My
          Computer, select the DVD drive, and double click
          setup.exe. The InstallWizard screen displays as
          shown in Figure 1B - 4-1.




Figure 1B - 4-1. Preparing to Install Screen


                    Step                        Result

            2. No user action is      TMIP B2 FY07 SP1
               required. System       Department of Defense
               automatically          Computer System
               advances.              Privacy Act Warning
                                      screen displays as shown
                                      in Figure 1B - 4-2.




Module 1B: B2 FY07 SP1 Installation            116                           Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                 3



                                                            3

Figure 1B - 4-2. Privacy Act Warning Screen


                     Step                      Result

           3. Read and select I       TMIP B2 FY07 SP1
              understand and          Welcome to the
              accept these            InstallShield Wizard
              conditions radio        screen displays as shown
              button. Then, click     in Figure 1B - 4-3.
              Next.
              See Figure 1B -
              4-2.




Module 1B: B2 FY07 SP1 Installation           117                            Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                                                             4

Figure 1B - 4-3. TMIP B2 FY07 SP1 Welcome Screen


                   Step                        Result

           4. Click Next.             TMIP B2 FY07 SP1
              See Figure 1B -         Installing TMIP
              4-3.                    Components screen
                                      displays as shown in
                                      Figure 1B - 4-4.




Module 1B: B2 FY07 SP1 Installation          118                               Instructor Guide
Procedures
                                                                SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                       20 Sep 2008




                                                                    5

Figure 1B - 4-4. Installing TMIP Component Screen


          Note: Components that will install or upgrade are
          listed in the order in which they will be installed. If the           Instructor Notes
          Wrapper detects a component already installed, it will
          list that item separately. This list may vary depending               Explain to the
          upon your site configuration.                                         students that the
                                                                                sequence of screen
                                                                                shots assumes that
                                                                                all components need
                    Step                          Result                        to be installed or
                                                                                upgraded.
            5. Verify the list and      Adobe Reader 8.1.2
               click Next.              screen displays as shown
               See Figure 1B -          in Figure 1B - 4-5.
               4-4.

          Note: If installing from DVD, prompts appear to insert
          DVD. Installation Wizards display for each individual
          component. Follow on screen prompts to complete the
          installation.



Module 1B: B2 FY07 SP1 Installation              119                              Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008

4.3.2 Adobe Reader Install

         Step                          Result

 6. Adobe Reader 8.1.2      TMIP-J B2
    installation. No user   Documentation install
    interaction is          will begin. Screen displays
    required during the     as shown in Figure 1B -
    install.                4-6.
    See Figure 1B -
    4-5.




Figure 1B - 4-5. Adobe Reader Installation Screen


4.3.3 TMIP-J B2 Documentation Installation on TC2 System
       TMIP-J Documentation is a Mandatory Foundation
       item that will always be installed. This is the first
       component to be installed.

       Follow these steps to install TMIP-J Documentation:

                    Step                          Result

          1. Click Next.               The Choose Destination
             See Figure 1B - 4-6.      Location screen displays
                                       as shown in Figure 1B -
                                       4-7.




Module 1B: B2 FY07 SP1 Installation             120                              Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                                      1




Figure 1B - 4-6. TMIP-J B2 Documentation Welcome Screen




                                                      2




Figure 1B - 4-7. Choose Destination Location Screen


Module 1B: B2 FY07 SP1 Installation         121                             Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008



                    Step                         Result

          2. Verify the                The Ready to Install
             Destination               screen displays as shown
             Location and click        in Figure 1B - 4-8.
             Next.
             See Figure 1B - 4-7.

          Note: If the Destination Location is incorrect, click the
          Change button and navigate to the correct location.
          Then, click Next.

          Note: It is recommended that the location for this
          component is on the C: partition on the TC2 server.




                                                          3




Figure 1B - 4-8. Ready to Install the Program Screen


                    Step                         Result

          3. Click Install.            The Setup Status
             See Figure 1B - 4-8.      progress screen displays
                                       as the system
                                       automatically advances

Module 1B: B2 FY07 SP1 Installation            122                              Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008


                   Step                        Result
                                      through the installation.
                                      Then, the InstallShield
                                      Wizard Complete screen
                                      displays as shown in
                                      Figure 1B - 4-9.




                                                        4




Module 1B: B2 FY07 SP1 Installation          123                              Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008



Figure 1B - 4-9. InstallShield Wizard Complete Screen


                    Step                        Result

          4. Click Finish.            The TC2 Upgrade
             See Figure 1B - 4-9.     installation begins as
                                      shown in Figure 1B - 4-10.


4.3.4 TC2 Upgrade Installation on TC2 System
       The TC2 Upgrade installation is next. Once you
       click Finish on the InstallShield Wizard Complete
       screen for the installation of TMIP-J
       Documentation; this process automatically
       launches. Refer to Figure 1B - 4-10.




Figure 1B - 4-10. Installing TC2 Updates Screen

       Once the initiation of the process is complete, the
       Welcome screen for TC2 Upgrade displays as
       shown in Figure 1B - 4-11.




Module 1B: B2 FY07 SP1 Installation            124                             Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                     1




Figure 1B - 4-11. Welcome Screen for TC2 Update Installation


       Follow these steps to complete the installation of
       TC2 Upgrade:

                    Step                        Result

          1.   Click Next.            The TC2 Backup Folder
               See Figure 1B -        screen displays as shown
               4-11.                  in Figure 1B - 4-12.




Module 1B: B2 FY07 SP1 Installation            125                            Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008




                                                    2




Figure 1B - 4-12. TC2 Backup Folder Screen


                    Step                       Result

          2.   Verify the Backup      The Ready to Install
               folder and click       TC2 screen displays as
               Next.                  shown in Figure 1B - 4-13.
               See Figure 1B -
               4-12.

          Note: If the TC2 Database Files Folder is incorrect,
          click the Change button and navigate to the correct
          destination folder. Then, click Next.




Module 1B: B2 FY07 SP1 Installation           126                            Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                                                     3




Figure 1B - 4-13. Ready to Install TC2 Screen



                    Step                        Result

          3.   Click Install.         The TC2 Update
               See Figure 1B -        Installer progress screen
               4-13.                  displays the status of the
                                      installation as shown in
                                      Figure 1B - 4-14.




Module 1B: B2 FY07 SP1 Installation           127                             Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




Figure 1B - 4-14. Installation Progress Screen for TC2 Update


                     Step                      Result

          4.   No action required.    When installation is
               Allow system to        complete, the final
               install.               confirmation message
                                      displays as shown in
                                      Figure 1B - 4-15.




                 5


Figure 1B - 4-15. Final Confirmation Message Screen




Module 1B: B2 FY07 SP1 Installation          128                               Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008


                    Step                         Result

          5.   Read the message        The Installing TC2
               and click Yes.          Update screen displays
               See Figure 1B -         again as shown in
               4-15.                   Figure 1B - 4-16.

          Note: The confirmation message indicates the amount
          of time it will take to continue the installation. At this
          point, all users must logoff the system as the system is
          offline once this part of the installation begins.




Figure 1B - 4-16. Installing TC2 Update Screen



                    Step                         Result

          6.   Allow the system to     The screen displays the
               advance                 program being installed.
               automatically.          Figure 1B - 4-16 displays
               See Figure 1B -         the progress of CHCSMGR
               4-16.                   installation.




Module 1B: B2 FY07 SP1 Installation             129                             Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008


          Note: As the installation process continues the Status
          field will display what is being installed and the
          progress bar will display the progress. User action is
          not required during this process. For complete details
          on each of the installation process steps, refer to the
          System Administration Manual.

          After the Backup installation completes, the
          InstallShield Wizard Completed screen displays as
          shown in Figure 1B - 4-17.




                                                     7




Figure 1B - 4-17. InstallShield Wizard Complete Screen for TC2 Update


                    Step                        Result

          7.   Click Finish.          EF Upgrade Installation
               See Figure 1B -        will now take place.
               4-17.

          Note: For additional details about TC2 systems, refer
          the System Administration Manual.




Module 1B: B2 FY07 SP1 Installation           130                               Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008

4.3.5 EF Upgrade Installation


         Step                         Result
 1. The following           Welcome to the
    screen, Checking        InstallShield Wizard
    “Expeditionary          for Expeditionary
    Framework”              Framework screen
    displays in the         displays Figure 1B -
    upper left hand         4-19.
    corner of the
    window Figure 1B -
    4-18.




Figure 1B - 4-18. Checking Expeditionary Framework Screen


         Step                         Result
 2. Click Next.             EF Installation
    See Figure 1B -         Information folder
    4-18.                   prompt screen displays
                            Figure 1B - 4-19.




Module 1B: B2 FY07 SP1 Installation            131                       Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008




                                               2




Figure 1B - 4-19. Welcome Screen for EF Installation



         Step                         Result
 3. The default is          EF Ready to Install
    stated below. If        Information screen
    you need to change      Figure 1B - 4-20.
    this then you can
    click Change,
    otherwise click
    Next.




Module 1B: B2 FY07 SP1 Installation            132                       Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008




                                      3



Figure 1B - 4-20. EF Installation Information Screen



         Step                         Result
 4. Click Install.          EF Ready to Install
    See Figure 1B -         Information screen
    4-20.                   Figure 1B - 4-21.




Module 1B: B2 FY07 SP1 Installation            133                       Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




                                       4



Figure 1B - 4-21. EF Ready for Installation Screen



         Step                         Result
                             Installing
                            Expeditionary
                            Framework status
                            screen displays Figure 1B
                            - 4-22. No user input
                            needed.




Module 1B: B2 FY07 SP1 Installation            134                        Instructor Guide
Procedures
                                                      SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                             20 Sep 2008




Figure 1B - 4-22. EF Status Screen



         Step                         Result
 5. Uninstall
    EFGroups? user
    prompt asks if the
    user would like to
    uninstall EFGroups
    Figure 1B - 4-23.



 6. Click No.

  If Yes is selected, then you then need to add the
  proper users back into the EF groups and have to
  logoff/logon to be able to configure EF.




                                6

Figure 1B - 4-23. Prompt for Uninstall of EFGroups


Module 1B: B2 FY07 SP1 Installation            135                      Instructor Guide
Procedures
                                                     SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                            20 Sep 2008




         Step                         Result
 7. Next, EF Groups
    screen Figure 1B -
    4-24 displays an
    informational
    message regarding
    EFGroups.

 8. After reading
    message, click
    Next to continue.




Module 1B: B2 FY07 SP1 Installation            136                     Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




                                 8




Figure 1B - 4-24. EFGroups Message Screen



         Step                         Result
                            Successful completion of
                            the EF will result in the
                            following screen
                            InstallShield Wizard
                            Completed Figure 1B -
                            4-25.

 9. Click Finish.




Module 1B: B2 FY07 SP1 Installation            137                        Instructor Guide
Procedures
                                                     SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                            20 Sep 2008




                                       9




Figure 1B - 4-25. EF Install Completion Screen




4.3.6 TMIP Plugins Upgrade Installation


         Step                         Result
1. The system prepares
   to install TMIP
   Plugins.

2. First, Checking
   “TMIP Plugins”...
   Figure 1B - 4-26 will
   display in the left
   hand upper corner of
   thee window.




Figure 1B - 4-26. Checking TMIP Plugins Screen


Module 1B: B2 FY07 SP1 Installation            138                     Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




         Step                         Result
 3. TMIP Plugins
    status screen
    displays Figure 1B -
    4-27. No user input
    needed.




Figure 1B - 4-27. Status Screen for TMIP Plugins



         Step                         Result
 4. Once the TMIP             The status message
    Plugins have              may vary depending
    completed, an EF          on the version of EF
    Suite Update              that was previously
    Manager screen            installed at your site.
    appears Figure 1B -
    4-28.

 5. Click on Close to         This screen will close
    continue.                 automatically in 60
                              seconds if the Close
                              button is not clicked.




Module 1B: B2 FY07 SP1 Installation            139                        Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




                           5

Figure 1B - 4-28. EF Suite Update Manager Screen


4.3.7 EF NCF Installer Upgrade Installation


         Step                          Result
1. Next, the Checking          This screen will remain
   EF NCF Installer            during the NCF
   screen appears in the       installation. No user
   left upper-hand             interaction is required
   corner of the window        during the EF NCF
   Figure 1B - 4-29. No        Installation.
   action is required.




Figure 1B - 4-29. Installing EF NCFs Screen




Module 1B: B2 FY07 SP1 Installation             140                        Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008

4.3.8 Final Installation Steps


          Step                        Result
   1. Now that the          The Component Status
      installation of all   screen displays Figure 1B
      components            - 4-30. Ensure this list is
      needing to be         correct.
      installed has
      completed

   2. Click Next to
      continue.




                                                                2
Figure 1B - 4-30. Component Status screen


          Step                        Result
   3. Informational
      prompt asks
      “Would like to


Module 1B: B2 FY07 SP1 Installation            141                          Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008


         Step                         Result
       delete the EF
       database
       backup folder?”
       Figure 1B - 4-31.

 If you select Yes, then the EF database backup that
 was created at the beginning of this installation will
 be removed. The database backup was created in
 the event that there was a failure during the EF
 installation. This prompt only displays when there
 was a successful EF installation. This will free up
 hard drive space on the computer.
 If you select No, then the database backup will be
retained.




   3

Figure 1B - 4-31. Delete EF Database Backup Prompt


         Step                         Result
   4. TMIP B2 FY07
      SP1
      InstallShield
      Wizard
      Complete
      screen displays
      Figure 1B - 4-31.

   5. Select Yes, I
      want to restart
      my computer
      now radio
      button.

Note: It is recommended to reboot the system at the
end of the installation. The installer should follow
local standard operating procedures (SOP) to bring
the system back on-line.


Module 1B: B2 FY07 SP1 Installation            142                          Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008


         Step                         Result
   6. Click Finish.




                   5




                                                                  6

Figure 1B - 4-32. TMIP B2 FY07 SP1 Installation Complete


4.3.9 Post-Installation Instructions for the TC2 System
      EF: If you are installing EF on a system that did not
      already have EF installed, please refer to section
      5.7 of the System Installation Guide (SIG) Gold
      Disk, Final – Revision D for instructions on
      configuring EF Admin for first time use.

       NCF: Following a successful installation of the
       TMIP-J B2 FY07 SP1 wrapper, you must run the EF
       ADMIN application in order for the NCF update to
       take effect. After this occurs, then the NCF will not
       display in the wrapper component listing screen as
       needing to be installed.


Module 1B: B2 FY07 SP1 Installation            143                               Instructor Guide
Procedures
                                                              SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                     20 Sep 2008

       As mentioned in the pre-installation instructions,
       the TMIP-J B2 FY07 SP1 installation wrapper will
       update several of the NCFs (Virtual Applications) on
       your system. It was recommended that you
       document any local settings prior to the
       installation, so that you can now make the same
       modifications to the updated NCFs since installation
       has completed.
       Once the system is back on-line, ensure that all
       conversions have completed using the following
       step (Figure 1B - 4-33).



       TMIP2:CHCS>D ^BDMONM

       Enter Version/Release Number: 4.630// <CR>

                          *** CONVERSION MONITOR
       ***



       1 - ROUTINES WITH EXCEPTIONS

       2 - NON-COMPLETE CONVERSION RUNS

       3 - ALL CONVERSIONS STATUS (BRIEF)

       4 - SINGLE CONVERSION MONITOR (DETAIL)

       5 - CONVERSION TIMING

       6 - PRINT ALL EXCEPTION REPORTS

       Selection: 2



Figure 1B - 4-33. Conversion Monitor

       A screen displays all incomplete conversions. This
       display is empty if all conversions for the selected
       Version/Release have already completed.
       Acceptable states for conversions are TASKED or
       RUNNING. As conversions complete, they are
       removed from the display. If a conversion is listed
       in a STOPPED or ABORTED state, please log a



Module 1B: B2 FY07 SP1 Installation            144                              Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008

       support call. Press <CR> or ‘^’ to refresh the
       screen.

       Notes:

          All conversions associated with the TC2 installation are complete prior to the
          completion of the installation, except for the following conversions: HEB33788 and
          HECAPERX. Those conversions are tasked for the evening of the installation. These
          conversions are NOT required to be complete before proceeding to use the system.
          These conversions can be checked during normal operation and should be monitored
          daily until it has completed.
          The following file is created during the CP 316 installation by the TC2 application and
          should not be removed:
          L:\CHCS\DATA\PACKAGES\CHCS_CP_P0316_4630_nnnnnn.RS - where nnnnnn could
          be any 6 digit number.


4.3.10 Verify TMIP-J B2 FY07 SP1 Software Version
4.3.10.1      TC2 Upgrade
      To verify that all Change Packages (up to CP 326)
      have been successfully installed on TC2, log into
      TC2 using the CHCSMGR account. Enter the
      command shown on Figure 1B - 4-34 to access the
      Application Product Installation screen. Please
      confirm that the CP version reported on the menu
      is 326 and press ENTER to exit the menu.

   TMIP2:CHCS>D ^ZPL

   User Account: chcsmgr
   Current CHCS Application release: 4.630            Last CP: P0326
   SY_LOAD Version: 1.5w

             1.   View and Transfer Available Change Packages
             2.   Application Package Documentation Menu
             3.   Change Package Pre-Installation Report
             4.   Application Package Installation Menu
             5.   Submit Change Package Testing Status
             6.   Management Menu
             7.   Reports Menu

          Select Application Product Installation Option: <CR>

   TMIP2:CHCS>
 Figure 1B - 4-34. Application Product Installation Screen




Module 1B: B2 FY07 SP1 Installation           145                               Instructor Guide
Procedures
                                                               SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                      20 Sep 2008

4.3.10.2      EF Upgrade
      To verify the version of EF software currently
      installed on the computer, log into EF Admin Figure
      1B - 4-35. Ensure that the Version stated on the
      screen is 2.0.1.120.




Figure 1B - 4-35. EF Admin Version Screen

       The first time that you log in after the upgrade, the
       following screen may display (Figure 1B - 4-36). It
       is recommended to click “YES” on this screen.




Figure 1B - 4-36. Re-Start EF
       The first time that you log in after the upgrade, the
       following screens may also display Figure 1B - 4-37
       and Figure 1B - 4-38. These notification messages
       display after a successful upgrade from EF 102 to
       EF 120. They are informational messages, click
       “OK” to continue.




Figure 1B - 4-37. NCF Files Processed Message




Module 1B: B2 FY07 SP1 Installation            146                               Instructor Guide
Procedures
                                                  SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                         20 Sep 2008




Figure 1B - 4-38 Processed for Deletion Message




Module 1B: B2 FY07 SP1 Installation        147                      Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008


4.4   Uninstall Instructions for TC2 System
       The uninstall process for TC2 systems is a manual
       process. System uninstall is NOT available for
       Cache enhancements on TC2. The EF component
       can be uninstalled. Uninstall should only be
       performed in situations where all other options
       have been exhausted. All users must logoff the
       system while the uninstall is being performed.

4.4.1 Stop EF Services on TC2 System
       Perform the following steps to Stop EF services:

                    Step                        Result

          1. Launch EFAdmin           The Expeditionary
             from Desktop.            Framework
                                      Administration screen
                                      displays as shown in
                                      Figure 1B - 4-39.

          2. Click Stop.              EF is not longer running.
             See Figure 1B -
             4-39.




Module 1B: B2 FY07 SP1 Installation           148                             Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                                                                                        3
               2




Figure 1B - 4-39. Expeditionary Framework Administration Screen




                    Step                        Result

          3. Close EF.                EF closes and Desktop
             See Figure 1B -          displays.
             4-39.


       After EF is stopped, you can begin to uninstall
       remaining components.




Module 1B: B2 FY07 SP1 Installation            149                          Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008

4.4.2 Remove Installed Features on TC2 System
       The Setup Maintenance screen for TMIP-J B2 FY07
       SP1 provides the option to remove installed
       programs. Use Remove on a TC2 System to
       uninstall:

       •   EF components
       •   TMIP-J Documentation
       •   Install Wrapper

       Once you verified EF is not running, perform these steps to remove EF components from
       a TC2 system:

                    Step                         Result

           1. Select Start from       The Start menu displays.
              Desktop.


           2. Highlight All           All Programs highlighted.
              Programs.

           3. Highlight TMIP.         TMIP highlighted.

           4. Select Remove.          The InstallShield
                                      Wizard screen displays as
                                      shown in Figure 1B - 4-40.




Figure 1B - 4-40. InstallShield Wizard Screen


                    Step                         Result

           5. User input is not       The Department of
              necessary. System       Defense Computer
              automatically           System warning screen
              advances.               displays as shown in
                                      Figure 1B - 4-41.



Module 1B: B2 FY07 SP1 Installation             150                           Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




                 6




                                                             6

Figure 1B - 4-41. Department of Defense Computer System Screen


                     Step                      Result

          6. Read and select I        The TMIP B2 FY07 SP1
             understand and           Maintenance Welcome
             accept these             screen displays as shown
             conditions radio         in Figure 1B - 4-42.
             button. Then, click
             Next.
             See Figure 1B -
             4-41.




Module 1B: B2 FY07 SP1 Installation          151                            Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008




                   7




                                                                7

Figure 1B - 4-42. TMIP B2 FY07 SP1 Welcome Screen


                       Step                    Result

          7. Select Remove            A message window
             radio button. Then,      displays as shown in
             click Next.              Figure 1B - 4-43.
             See Figure 1B -
             4-42.




               8


Figure 1B - 4-43. Message Window




Module 1B: B2 FY07 SP1 Installation           152                              Instructor Guide
Procedures
                                                                SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                       20 Sep 2008


                      Step                         Result

            8. Click Yes.               TMIP B2 FY07 SP1
               See Figure 1B -          screen displays a list of all
               4-43.                    installed programs
                                        available for uninstall as
                                        shown in Figure 1B - 4-44.




        9


Figure 1B - 4-44. List of Installed Programs



                      Step                         Result

            9. Review list and click    The EF NCF Installer
               Yes.                     screen displays as shown
               See Figure 1B -          in Figure 1B - 4-45.
               4-44.


            Note: The first program to uninstall is the EF NCF
            Installer. The components will uninstall in the order in
            which they appear in Figure 1B - 4-45.




Module 1B: B2 FY07 SP1 Installation              153                              Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008

4.4.3 Uninstall EF NCF Installer on TC2 System
        Follow these steps to uninstall EF NCF Installer:

                     Step                         Result
                                         Windows Installer
                                         screen appears Figure 1B
                                         - 4-45 asking “Are you
                                         sure you want to
                                         uninstall this
                                         product? “

               1. Click Yes.            The EF NCF Installer will
                                        be uninstalled. No user
                                        interaction is required.




    1

Figure 1B - 4-45. Uninstall Confirmation Screen


4.4.4 Uninstall TMIP Plugins


          Step                         Result
   1. TMIP Plugins             Uninstalling TMIP
      will be uninstalled      Plugins screen appears
      next.                    Figure 1B - 4-46 in upper
                               left hand corner of the
                               window.



                             The EF NCF Installer will
                             be uninstalled. No user
                             interaction is required.




Module 1B: B2 FY07 SP1 Installation             154                            Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




Figure 1B - 4-46. Uninstalling TMIP Plugins Screen



          Step                        Result
   2. Prior to the
      uninstallation,
      Windows
      Installer screen
      appears Figure
      1B - 4-47 asking
      “Are you sure
      you want to
      uninstall this
      product? “


   3. Click Yes to
      continue.

 If you clicked Yes, the TMIP Plugins Removal
 screen will appear. The status of the uninstallation
 will display as it progresses. No user interaction is
 needed Figure 1B - 4-48.




      3

Figure 1B - 4-47. Uninstall Confirmation Screen




Module 1B: B2 FY07 SP1 Installation             155                        Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008




Figure 1B - 4-48. TMIP Plugins Removal Screen




4.4.5 Uninstall EF


         Step                         Result
 1. Next, EF will be
    uninstalled. A
    notification screen
    will display in the
    left upper corner of
    the window Figure
    1B - 4-49.




Figure 1B - 4-49. Uninstalling Expeditionary Framework Notification Screen


         Step                         Result
2. Prior to the
   uninstallation,
   Windows Installer
   screen appears
   Figure 1B - 4-50
   asking “Are you
   sure you want to
   uninstall this


Module 1B: B2 FY07 SP1 Installation            156                           Instructor Guide
Procedures
                                                     SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                            20 Sep 2008


         Step                         Result
   product? “



3. Click Yes to proceed.




     3

Figure 1B - 4-50. Uninstall Confirmation Screen



         Step                         Result
 4. If you clicked Yes,
    the EF Removal
    screen will appear.
    The status of the
    uninstallation will
    display as it
    progresses. No
    user interaction is
    needed Figure 1B -
    4-51.




Figure 1B - 4-51. EF Removal Screen




Module 1B: B2 FY07 SP1 Installation            157                     Instructor Guide
Procedures
                                                           SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                  20 Sep 2008


         Step                         Result
   5. Uninstall
      EFGroups? “Do
      you want to
      uninstall
      EFGroups?”
      Figure 1B - 4-52.

   6. Click No.




                                 6

Figure 1B - 4-52. Uninstall EFGroups Prompt


4.4.6 Uninstall EF NCF


         Step                         Result
 1. Next, EF NCF will       Prior to the uninstallation,
    be uninstalled. A      Windows Installer
    notification screen    screen appears (Figure 1B
    will display in the    - 4-45) asking “Are you
    left upper corner of   sure you want to
    the window             uninstall this product? “
    Figure 1B - 4-53.

 2. Click Yes to           The EF NCF Installer will
    continue.              be uninstalled. No User
                           interaction is required.




                       Figure 1B - 4-53. Uninstall Confirmation Screen


Module 1B: B2 FY07 SP1 Installation            158                           Instructor Guide
Procedures
                                                        SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                               20 Sep 2008




4.4.7 Uninstall TMIP-J B2 Documentation


         Step                         Result
   1. The Uninstall of
      Documentation
      will now
      commence. A
      notification
      screen will
      display in the left
      upper corner of
      the window
      Figure 1B - 4-54.




Figure 1B - 4-54.Uninstalling TC2 Documentation Notification Screen



         Step                         Result
   2. Screen appears
      asking “Do you
      want to
      completely
      remove the
      selected
      application and
      all of its
      features?”
      Figure 1B - 4-55.

   3. Click Yes.




Module 1B: B2 FY07 SP1 Installation            159                        Instructor Guide
Procedures
                                                          SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                 20 Sep 2008




          3

Figure 1B - 4-55. Component Removal Confirmation Screen



         Step                         Result
   4. The TMIP-J B2         The InstallShield
      Documentation         Wizard Completed
      Uninstall             screen display as shown
      Complete screen       in Figure 1B - 4-56.
      appears notifying
      you that the
      documentation
      uninstall is
      complete Figure
      1B - 4-55.




                                                      5




Figure 1B - 4-56. InstallShield Wizard Complete Screen


Module 1B: B2 FY07 SP1 Installation            160                          Instructor Guide
Procedures
                                                            SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                   20 Sep 2008




                     Step                       Result
               5. Click Finish.       Uninstall Complete
                  See Figure 1B -     screen displays as shown
                  4-56.               in Figure 1B - 4-57.




                                                                 1

Figure 1B - 4-57. TMIP B2 FY07 SP1 Uninstall Complete Screen



                     Step                       Result

          1.   Click Finish.          TMIP-J components on the
               See Figure 1B -        TC2 System are
               4-57.                  uninstalled.


          Once the final Uninstall Complete screen is closed, you



Module 1B: B2 FY07 SP1 Installation           161                             Instructor Guide
Procedures
                                                       SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                              20 Sep 2008


                   Step                       Result
          are instructed to Restart the computer.




Module 1B: B2 FY07 SP1 Installation          162                         Instructor Guide
Procedures
                                                         SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                20 Sep 2008

5.   Student Evaluation

       5.1      Skill                                                  Instructor Notes
       During this module, students have successfully                  Check with each
       completed the installation of the Foundation                    student to confirm
                                                                       that they have
       Component software applications required as a
                                                                       successfully
       prerequisite for the installation of the TMIP-J
                                                                       completed the
       software.                                                       installation of all
                                                                       seven Foundation
       The student evaluation for this module is the                   Components
       successful installation of the following:                       software
                                                                       applications.
       •     .NET Framework
       •     Active Sync                                               Answer any
       •     Adobe Reader 8                                            questions the
       •     AHLTA Warrior Web Client                                  students might have
       •     TMIP-J B2 Utilities                                       regarding the
       •     Web Services Enhancements 2.0 SP3                         Foundation
                                                                       Components.
       •     Expeditionary Framework
       •     Micromedex
       •     Oracle 10G
       •     AHLTA-Theater
       •     Medic
       •     Microsoft Office XP
       •     Netscape Navigator
       •     PMIST PlexusD
       •     SAMS
       •     TMIP-J Reporting
       •     Business Objects Update
       •     TMIP-J B2 Documentation

       The instructor will confirm each student has
       successfully installed the TMIP-J B2 FY07 SP1
       Application Suite Software.




Module 1B: B2 FY07 SP1 Installation           163                           Instructor Guide
Procedures
                                                             SAIC D/SIDDOMS Doc. D3-TMIP-8018A
                                                                                    20 Sep 2008

6.     Conclusion

       At the conclusion of this module, students have                     Instructor Notes
       demonstrated their ability to successfully complete
       the installation of the TMIP-J B2 FY07 SP1                          Summarize the
                                                                           Screens Foundation
       Application Suite applications.
                                                                           Software and the
                                                                           importance of these
       Students have successfully installed:
                                                                           programs as a
                                                                           foundation for the
       •   Foundation Components                                           TMIP-J software
               .NET Framework                                              installation.
               Microsoft Web Services Enhancements
               Adobe Reader 8
               Oracle
               Microsoft Office XP
               Netscape Navigator
               TMIP-J Documentation
       •   Integrated Software Components
               AHLTA Warrior
               TMIP-J B2 Utilities
               Expeditionary Framework
               Micromedex
               AHLTA-THEATER
               MEDIC
               PMIST PlexusD
               SAMS
               Business Objects




Module 1B: B2 FY07 SP1 Installation            164                             Instructor Guide
Procedures