Docstoc

Cavity - PDF

Document Sample
Cavity - PDF Powered By Docstoc
					    CAVITY FIXINGS
  Produkt Titel
Produkt Titel
    Unterzeile
Unterzeile

                     Cavity
                         fixings




                               95
CAVITY FIXINGS
fischer Metal cavity fixing HM
The practical cavity fixing.


Suitability                                                    1   HM-S with metric screw
                                                               2   HM-H with angle hook
Suitable for:
Gypsum plasterboard, gypsum fibreboards,
chipboards, fibre cement boards, wood wool
building slabs, hard fibreboards, hollow brick                 1
ceilings, ribbed floors with hollow stone fillers,
hollow body ceilings, etc.
For fixing of:
Lamps, shelves, skirting boards, switches,
                                                               2
overhead cabinets, curtain rails, cable ducts,
window frames, boilers, wardrobes, etc.



Description                                                    Installation instructions
The fischer metal cavity fixing HM is used in hollow           ½ Choose the suitable cavity fixing depending on the thick-
elements which are faced with plasterboard, plywood or           ness of the board.
chip-boards as well as for the direct assembly in hollow
                                                               ½ Drill the necessary drill-hole (see technical data).
brick-
work, hollow ceilings and suspended ceilings. The expanding    ½ Insert the cavity fixing by means of the installation tool
feature of this metal anchor ensures extremely high loads        and pre-expand it. Otherwise, knock the cavity fixing into
are achieved.                                                    place with a hammer.
                                                               ½ Unscrew the pre-assembled screw.
Along with the metric screw variation, other variations with
angle hooks are available.                                     ½ Place the object to be fixed and attach the same with the
                                                                 enclosed screw using a screw driver/electric screw driver.
                                                               ½ The assembly is correctly finished if the screw is notice-
                                                                 ably well tightened.
                                                               ½ The HM 8 x 55 SS is to be assembled using the fischer
                                                                 setting tool HMZ 1 only.




Installation diagram




96
CAVITY FIXINGS
fischer Metal cavity fixing HM

Technical data                                                                                                   Installation examples



HM-S – zinc plated, with screw
                             do              t             l         ls         dp          da
                                             Min.                               Max.        Max.          Qty.
                                             drill-hole    Fixing-              board-      fixture       per
                             Drill           depth         length    Screw      thickness   thickness     box/
Type              Art. No.   ‡ mm            mm            mm        ‡ x mm     mm          mm            pcs.

HM 4 x 32 S       62306       8              42            32        M 4 x 40    3–13       16            50
HM 4 x 46 S       62307       8              56            46        M 4 x 52    5–18       23            50
HM 4 x 59 S       62308       8              69            59        M 4 x 66   35–42       16            50
HM 5 x 37 S       62310      12              47            37        M 5 x 45    6–15       19            50
HM 5 x 52 S       62311      12              62            52        M 5 x 60    7–21       24            50
HM 5 x 65 S       62312      12              75            65        M 5 x 73   20–34       24            50
HM 6 x 37 S       62314      13              47            37        M 6 x 45    6–15       14            50
HM 6 x 52 S       62315      13              62            52        M 6 x 60   10–21       24            50
HM 6 x 65 S       62328      13              75            65        M 6 x 70   20–34       24            50
HM 6 x 80 S       62316      13              90            80        M 6 x 88   38–50       24            50
HM 8 x 55 SS*     62329      13              65            55        M 8 x 60   10–21       24            50
* with hexagon headed screw, assembly only by using the setting tools HMZ 1




                                                                                                                                         Plasterboard and
                                                                                                                                         mineral fibre




Installation tool




HM Z 1 – the professional                                 HM Z 2 – the DIY installation tool
                                                                                                                                                UW profile
                                                                                               Quantity
Type                              Art. No.                                                     per box                                          CW profile
HM Z 1                            62320                                                        1
                                                                                                                                                filler
HM Z 2                            62321                                                        1




                                                                                                                                                             97
CAVITY FIXINGS
fischer Toggle fixings KD, KDH, KM, K, KT
The versatile cavity fixing.


Suitability                                                        1    Spring toggle KD 3 + 4
                                                                   2    Spring toggle KDH 3 + 4
Suitable for:
                                                                   3    Gravity toggle KD 5 + 6 + 8
Gypsum plasterboard, gypsum fibreboards,
                                                                   4    Gravity toggle KDH 5 + 6 + 8
chipboards, fibre cement boards, wood wool
                                                                   5    Spring toggles KT 3 + 5 + 6
building slabs, hard fibreboards, hollow brick
                                                                   6    Spring toggles + Screws KT 3 + 5 + 6
ceilings, ribbed floors with hollow stone fillers,
stone ceilings, hollow ceilings, trapezoidal
sheet, etc.
For fixing of:
Lamps, shelves, switches, overhead cabinets,
washbasins, curtain rails, shelf rails, cable ducts,                                                       5
hanging flower baskets, boilers, wardrobes, etc.


                                                                   1            2         3          4         6
Description

The fischer spring toggles and gravity toggles are standard
cavity fixings for ceiling, wall and floor fastenings. With
their long threaded rod, they will also bridge large wall thick-
nesses. The fixings are corrosion-protected by zinc-plating
and yellow passivating.
                                                                   Installation instruction
The fischer spring toggles KD/KDH/KT automatically expand
into any position through spring force.
The fischer gravity toggles KD/KDH 5/6/8 possess a toggle              ½ The dimensions
bar which automatically “locks” in the cavities.                       a = min. cavity and
                                                                       dp = max. board thickness
The fischer gravity toggle KM 10 with its 140 mm long                  (see table) should be
bearing arm is specially designed for washbasin and urinal             borne in mind.
fixings in plasterboard, chipboard or fibre cement boards.
It is supplied complete with a nylon bush and a drill-hole
support sleeve.




Installation diagram




98
CAVITY FIXINGS
fischer Toggle fixings KD, KDH, KM, K, KT

Technical data                                                                                     Installation examples


               KD 3 + 4                 KDH 3 + 4




               d             dp             a          l           ds

                                            Max.
                                            board      Min.
                                            thick-     cavity     Fixing
                             Drill ‡        ness       depth      length   Screws       Quantity
Type           Art. No.      mm             mm         mm         mm       mm           per box

KD 3           80181         12             65         27          95      M 3 x 90     50
KDH 3          80182         12             51         27         105      M 3 x 80     25
KD 4           80183         14             69         34         105      M 4 x 100    25
KDH 4          80184         14             35         34          95      M 4 x 80     25




KD 5 + 6 + 8                           KDH 5 + 6 + 8

KD 5           80187         16             63             70     100      M 5 x 100    25
KDH 5          80188         16             60             70     130      M 5 x 90     20
KD 6           80185         16             63             70     100      M 6 x 100    25
KDH 6          80186         16             60             70     130      M 6 x 100    20
KD 8           80178         20             55             75     100      M 8 x 100    20
KDH 8          80179         20             55             75     130      M 8 x 100    20




KM 10          50326         30             90         140        240      M 10 x 180   25
                                                                                                   Extraction forces (ultimate loads) in kN.
                                                                                                   These are ultimate loads of the fixing. The load-bearing
See also page 146, washbasin and urinal fixings.
                                                                                                   behaviour of the anchor base is not taken into account.
                                                                                                   An appropriate safety coefficient should be allowed on these
                                                                                                   ultimate loads (see page X).
                   KT                                      KT S
                                                                                                   KD 3                           1.0
                                                                                                   KD 4                           2.0
                                                                                                   KD 5                           3.0
KT 3           59980         11             -          27          -       M3           100
                                                                                                   KD 6                           3.5
KT 4           59981         14             -          27          -       M5           100
                                                                                                   KD 8                          13.5
KT 5           59982         18             -          32          -       M6           50
                                                                                                   KM 10                         13.0
KT 3 x 50 S    59986         11             25         27         50       M 3 x 50     50
                                                                                                   KDH 3                          0.1
KT 4 x 50 S    59987         14             25         27         50       M 5 x 50     25
                                                                                                   KDH 4                          0.4
KT 5 x 75 S    59988         18             45         32         75       M 6 x 75     25                      Hook bends
                                                                                                   KDH 5           open           0.6
                                                                                                   KDH 6                          1.0
                                                                                                   KDH 8                          1.5




                                                                                                                                                            99
CAVITY FIXINGS
fischer Board fixing PD
The latest development for boards and cavities.


Suitability                                                      1     Board fixing PD
                                                                 2     Chipboard screw
Suitable for: All standard board and hollow
materials such as plasterboard, fibreboard,
chipboard, fibre cement board, lightweight
wood-shaving board, hard fibreboard, hollow
profiles, hollow floors, hollow doors, etc.
                                                                1
For fixing of: Lamps, shelves, switches, skirting
boards, wall cupboards, curtain rails, cable ducts,
picture frames, water geysers, coat hooks,
                                                                2
wooden battens, etc.



Description                                                     Technical data
The fischer Board fixing PD is the new standard cavity fixing                          do        td           dp           l        ds x ls         da
for interior installation work. The procedure for using it is                                    Min.
                                                                                                 drill-hole   Board        Fixing   Chipboard       Fixing
convincing, fast and easy.                                                             Drill ‡   depth        thickness    length   screw           thickness   Quantity
                                                                Type        Art. No.   mm        mm           mm           mm       ‡ mm            mm          per pack

                                                                PD 8        24771       8        31           6            29       4               –           100
½ Pre-formed interior thread specially developed for            PD 10       15935      10        30           7            28       5               –           100
  chipboard screws. Fast and easy insertion of screw.           PD 12       15937      12        28           9            27       6               –            50
½ Extra short expansion zone means low space requirement        PD 8 S      24772       8        31           6            29       4 x 40          11           50
  behind board or short hole depth in solid material.           PD 10 S     15936      10        30           7            28       5 x 40          12           50
½ Two guide ribs with a lock-in mechanism allows the screw      PD 12 S     15938      12        30           9            27       6 x 50          22           25
  to be screwed in and out several times.
½ Several lengthwise ribs prevent PD from turning with
  screw.
½ Small strong flange prevents the fixing from slipping
  further into the hole.
½ Fixing is always installed first (i.e. flush with substrate
  surface).

Installation instruction                                        Installation examples
½ Best holding properties in board-type materials due to
  form locking similar to undercut.
½ No special tools or accessories required for installation.                                                                              l
½ Suitable for common chipboard screws only. Not suitable                                                                                     dp          da
  for double-threaded chipboard screws.




                                                                                                                      do                                          ds
Recommended loads in kN
                                PD 8        PD 10      PD 12
Plasterboard 9.5 mm             0.10        0.10       0.10
Plasterboard 12.5 mm            0.10        0.10       0.15
Plasterboard 2 x 12.5 mm        0.15        0.15       0.15                                                                             td
Fibreboard 12.5 mm              0.20        0.25       0.30                                                                                    ls
Plywood board                   0.15        0.40       0.80
Chipboard 16 mm                 0.25        0.25       0.25




Installation diagram




100
CAVITY FIXINGS
fischer Plasterboard fixing metal PDM / PD / FD

Suitability                                                      1     Plasterboard fixing metal PDM
                                                                 2     Plasterboard fixing nylon PD
Suitable for:
                                                                 3     Plasterboard fixing metal FD
For single and double plasterboard, rear-insulated
plasterboard, fibreboard.
For fixing of:
Lamps, skirting boards, switches, picture frames,
cable ducts, cable clamps, curtain rails, wooden                                                                                    2
battens, etc.                                                    1


                                                                                                                                    3


Description
½ Special fixing made of metal.
                                                                Technical data
½ Thread section cuts into substrate material until specially
  shaped head is flush with the surface.                                                          l            t                ds x ls
                                                                                                               Min.
½ Very little space required behind plasterboard.                                                 fixing
                                                                                                               Plaster-
                                                                                                               board                       Qty..
                                                                                                  length       thick-           Material   per
                                                                Typ                  Art.-Nr.     mm           ness mm          Type       pack

                                                                PDM 100              57100        31           9                Metal      100
Installation instruction:
                                                                PD 40 S              60190        37           9                Nylon      100
½ Can be installed without pre-drilling using electric or       FD                   57130        -            9                Metal      100
  battery screwdriver (bit size 2) or manual screwdriver        1)   Supplied with plasterboard screws with pan-head.
  (no installation tool necessary).                             2)   Supplied with plasterboard screws with countersunk head.

½ Not suitable for tiled plasterboard.
½ Suitable for wood, sheet and chipboard screws with
  diameter 4.0–5.0 mm.



                                                                Installation example

                                           da




                             t
                                 l




Installation diagram




                                                                                                                                           101

				
DOCUMENT INFO
Shared By:
Categories:
Tags: Cavity
Stats:
views:123
posted:7/26/2010
language:German
pages:7
Description: Cavity