Get documents about "PLC Training Courses
Document Sample
Training Courses and Information
Training by seasoned Mr. Doug Bell of InterConnecting Introductory PLC
Automation, Inc., has been using both our course contents
veteran Doug Bell of products and competitive products for over You’ll use custom-built training panels that
InterConnecting 25 years. He has years of design and contain our D4-450 CPU, a variety of I/O
consulting experience, has been the focus modules, operator panels, and DirectSOFT.
Automation, Inc. of PLC magazine articles, and now offers • PLC family overview for all DirectLOGIC
products
Do you need training courses for PLCs or training classes taught at various locations
• Basic PLC theory of operation including CPU,
drives, taught by someone who has used around the country. bases, discrete I/O, analog I/O, and commu-
many of our products to solve difficult, real- Mr. Bell started his career as an Electronics nications
world application problems? Would you be Technician on the factory floor at Crown • System configuration techniques
even more interested if the training was Cork & Seal, one of the world’s premier • Simple RLL programming including timers,
held in a city near you? We thought so! suppliers of cans and closure systems. So, counters, drums, basic math, and more.
2010 Training Schedule * he can relate to the day-to-day problems • Advanced programming including number
associated with using and troubleshooting conversions, subroutines, RLL Plus, PID
Introductory PLC Training theory, etc.
• Chicago, IL April 13-15, 2010 PLC systems. After his stint at Crown, he
• Atlanta, GA May 4-6, 2010** established a very successful firm that
• Las Vegas, NV June 15-17, 2010 designs and implements control applica- Advanced PLC
• Atlanta, GA Sept. 21-23, 2010** tions, including programming and startup. contents
• Las Vegas, NV Oct. 19-21, 2010 Here’s a brief list of Mr. Bell’s qualifications Using training panels that contain our
• Dallas, TX Nov. 9-11, 2010 and applications experience: D4-450 CPU, a variety of I/O modules,
operator panels, and DirectSOFT, you will:
• Atlanta, GA Dec. 7-9, 2010**
• Nearly 20 years of experience in PLC and • Create programs based on specs given to
• Cleveland, OH Feb. 8-10, 2011 control system design, for more than 45 you in class
• Irvine, CA March 8-10, 2011 facilities worldwide, including sites in the • Learn table and pointer commands
• Chicago, IL April 5-7, 2011 U.S., France, Germany, England, and Mexico
• Wire, program and use Terminator and 205
• Atlanta, GA May 3-5, 2011** • Managed various automation projects, remote I/O
• Newark, NJ May 31-June 2, 2011 including specification, procurement,
programming, site startup and maintenance • Writing and structuring programs using
Stage
• Applications experience, including electronic
feeder controls, HVAC controls, automated test • Debug, diagnose and program PLC over cell
Advanced PLC Training phone
stations, coating systems, printing lines, motion
• Chicago, IL April 20-22, 2010 control systems, high-speed applications, Networking
• Atlanta, GA May 11-13, 2010** communication systems, device-level network • Serial RS-232 and RS-422
• Atlanta, GA Sept. 28-30, 2010** applications, PC-based control solutions, HMI
systems, etc. • Ethernet
• Las Vegas, NV Oct. 26-28, 2010
• Atlanta, GA Dec. 14-16, 2010** • Experience in training both factory technicians - MAC-IP-PLC-Addressing
and operations personnel • Networking with multiple PLCs
• Cleveland, OH Feb. 15-17, 2011
• Irvine, CA March 15-17, 2011 Note: PID class may be taught by guest • Control motor speed from a master PLC
instructors chosen by Mr. Bell. to a slave w/motor/encoder setup
• Chicago, IL April 12-14, 2011
• Atlanta, GA May 10-12, 2011** • Learn to use Read and Write com-
AUTOMATIONDIRECT does not set prices mands and the wiring of a network
• Newark, NJ June 7-9, 2011
or take reservations for these classes. For
PID Training additional information, course prices, PID course contents
• Atlanta, GA May 18-20, 2010** You’ll use custom-built training panels to:
schedules, reservations, contact:
• Las Vegas, NV Nov. 2-4, 2010 • Learn PID short cuts and tools
• Atlanta, GA May 17-19, 2011** • Learn to setup, tune, troubleshoot and
InterConnectingAutomation
debug PID loops.
* Dates and cities subject to change. 12154 North Ridge Trail
• Adjust the gain, reset, rate, and many other
Confirm at time of class reservations. Hales Corners, WI 53130 PID parameters, to see how they affect the
** Classes held at AutomationDirect loop
headquarters in Cumming, GA.
Phone: 414-425-8348
For the most current schedule, visit the Fax: 414-425-8363
InterConnectingAutomation website:
E-mail:
www.interconnectingautomation.com info@interconnectingautomation.com
Website:
If your city isn’t listed here, or if you need an www.interconnectingautomation.com
on-site class, custom class etc., then please
call the folks at InterConnecting
Automation. They can usually create a
class to suit a wide variety of special
requirements.
Volume 13
e35-16 Appendix 1 - 80 0 - 633 - 0405
Company
Training Videos and Online Training Information
Systems
Overview
Programmable
Controllers
“Introduction to PLC “PLC Analog I/O” Training
Logic and Principles” Video Set Field I/O
Training Video Set Mr. Doug Bell of InterConnecting
Software
Mr. Doug Bell of InterConnecting Automation, Inc., offers a PLC Analog I/O
Automation, Inc., offers a basic PLC video training video set. C-more &
other HMI
training package. The kit includes the following:
• Two 2-hour analog training videos, Drives
The kit includes the following: firmware upgrade instructional video, a
• Two video tapes showing examples of pro- pre-wired analog trainer and DL05 analog
gramming with DirectSOFT. You can get Soft
I/O module and manual. This unit is a Starters
“Hands-On” experience by following along “plug-and-play” add-on to the DL05 PLC
with the instructor who is using the same Trainer or any existing DL05 PLC. Motors &
hardware. (DirectSOFT V2.4a, or later,can Gearbox
be used with this course.) PLC Pre-wired Analog I/O Trainer:
• Pre-wired PLC trainer based on the • Two 0-10 VDC meters Steppers/
AUTOMATIONDIRECT D0-05AR PLC, with push- Servos
• Two 0-5 VDC potentiometers
buttons, lights, selector switches and a pro-
gramming cable ready to plug into your • 24 VDC wall-mount power supply Motor
computer • DL05 analog combo module, plus pre- Inexpensive online PLC Controls
wired cable from the trainer to the
• A DL05 Users Manual, which is referred to
throughout the video and is great for future module, ready to plug into your DL05 PLC training now available Proximity
Sensors
reference trainer or any existing DL05 PLC. Interconnecting Automation offers an inex-
Benefits of this video course: Benefits of this video course: pensive subscription-based online training Photo
Sensors
• Work in the privacy of your own • Work in the privacy of your own program. The online training section is a
home/office home/office
component of Limit
• No need to travel anywhere — your family Switches
• No need to travel anywhere — your family www.interconnectingautomation.com.
won’t have to do without you! won’t have to do without you!
• Learn at your own pace — take a break Visitors can view the complete list of Encoders
• Learn at your own pace — take a break videos in each “library” as well as watch
when you need it when you need it Current
• Refer back to the video at any time — sample videos; when ready to purchase, Sensors
• Refer to the video at any time — you’ll still
have the hardware to experiment with you’ll still have the hardware to experiment the prospective member registers and pays
with. Pressure
for their selected libraries on a monthly Sensors
Overview of course content: basis. The member receives unlimited
Overview of course content:
• Basics: introduction, basic wiring, logic AND
& OR, sensors, relays, reasons for using a • Analog I/O principles - voltage, current, access from a maximum of two PCs Temperature
Sensors
PLC, AUTOMATIONDIRECT PLC families thermocouples anytime during the 30 days; videos can be
• CPU Internals: scan time, addressing, I/O • PLC analog modules - input, output, ther- viewed as many times as needed during Pushbuttons/
(Xs and Ys), commands mocouple the subscription period. Most libraries Lights
• I/O: inside the I/O boards, octal addres-ing, • Configuring the analog I/O modules in the range from $29.95 - $39.95 per month. Process
programming methods -- hand-held pro- PLC
Libraries currently available include:
grammer - DirectSOFT • DL05 PLC analog tutorial includes configu- Relays/
ration, wiring, scaling (standard and non- • Introduction to PLC Principles (For the Timers
• DirectSOFT: getting started, the launch pad, novice-non user with limited controls
links, offline vs. online programming, standard) and programming, using the
potentiometers and voltmeters on the knowledge) Comm.
maneuvering through & using DirectSOFT,
creating and editing rungs trainer unit • CLICK series PLC Training (includes
• Application programming examples, Introduction to PLCs library) Terminal
• Programming & Debugging: using inputs Blocks &
and outputs, debugging and status mode, including controlling motor speed with a Future libraries include Productivity3000 Wiring
PLC commands, troubleshooting drive and an analog output card in a PLC
Training (includes Introduction to PLCs Power
To order the PLC Logic and Principles video library) and C-more HMI training.
or the PLC Analog I/O video, contact Circuit
Many of these video libraries will also be
InterConnecting Automation directly at: Protection
offered as interactive training courses, with
414-425-8348, or online at
progress tests and certification upon Enclosures
www.interconnectingautomation.com completion.
Tools
For more information, to view sample
videos or register for a subscription, visit: Pneumatics
www.interconnectingautomation.com Appendix
Product
Index
Part #
Index
Volume 13
w w w. a u to m at i o n d i re c t . c o m Appendix e35-17
Related docs
