Docstoc

ARCAT spec ava brush

Document Sample
ARCAT spec ava  brush Powered By Docstoc
					                                       SECTION 10660

                               GLASS PARTITION SYSTEMS

PART 1 GENERAL

1.1   SECTION INCLUDES

      A.   Full height single glazed partition system.

      B.   Full height double glazed partition system.

      C.   Free standing glass partition system.

      D.   Glass doors and door hardware.

1.2   RELATED SECTIONS

      A.   Section 07900 - Caulking

      B.   Section 08210 - Wood Doors.

      C.   Section 08710 - Door Hardware. Door cylinders.

      D.   Section 09620 - Gypsum Board Assemblies: Adjacent construction for recessed
           frames and closers.

1.3   REFERENCES

      A.   ASTM A 276 - Standard Specification for Stainless Steel Bars and Shapes.

      B.   ASTM A 276 - Standard Specification for Stainless Steel Bars and Shapes.

      C.   ASTM B 221-06 - Standard Specification for Aluminum and Aluminum-Alloy
           Extruded Bars, Rods, Wire, Profiles, and Tubes.

      D.   ASTM C 864-05 - Standard Specification for Dense Elastomeric Compression Seal
           Gaskets, Setting Blocks, and Spacers.

      E.   ASTM C 1036-06 - Standard Specification for Flat Glass.

      F.   ASTM C 1048-04 - Standard Specification for Heat-Treated Flat Glass-Kind HS,
           Kind FT, Coated and Uncoated Glass.

      G.   ASTM C 1115-06 - Standard Specification for Dense Elastomeric Silicone Rubber
           Gaskets and Accessories.

      H.   ASTM C 1172-03 - Standard Specification for Laminated Architectural Flat Glass.

      I.   AAMA 611-98 - Voluntary Specification for Anodized Architectural Aluminum.



                                           10660-1
      J.   AAMA 2603-02 - Voluntary Specification, Performance Requirements and Test
           Procedures for Pigmented Organic Coatings on Architectural Extrusions and Panels.

      K.   AAMA 2604-05 - Voluntary Specification, Performance Requirements and Test
           Procedures for High Performance Organic Coatings on Architectural Extrusions and
           Panels.

      L.   ANSI A156.1 - Standard for Butts and Hinges'

      M.   ANSI A156.4 - Standard for Architectural Door Trim.

      N.   British Standard - BS 5281: Part 1: 1084.

      O.   British Standard - BS 2750: Part 3: 1980. - Acoustics - Measurement of sound
           insulation in buildings and of building elements.

      P.   Forest Stewardship Council (FSC) - Certification Procedures.

      Q.   Glass Association of North America (GANA) - Glazing Manual (2004).

1.4   DESIGN / PERFORMANCE REQUIREMENTS

      A.   Design Requirements: Design glass partition system to withstand live loads in
           accordance with applicable Building Code with maximum L/120 deflection.

      B.   Regulatory Requirements: Provide tempered or laminated safety glass for locations
           subject to human impact as required by the applicable Building Code.

      C.   Acoustical Requirements: Sound reduction tested in accordance with BS 2750: Part
           3: 1980 and rated in accordance with BS 5281: Part 1: 1984.

1.5   SUBMITTALS

      A.   Submit under provisions of Section 01300.

      B.   Product Data: Manufacturer's data sheets on each product to be used, including:
           1.   Preparation instructions and recommendations.
           2.   Storage and handling requirements and recommendations.
           3.   Installation methods.

      C.   Shop Drawings: Include plans, elevations, and details showing type and thickness of
           metal and glass, glazing, anchoring, and joining, hardware, trim, and accessories.

      D.   LEED Submittals: Provide documentation of how the requirements of Credit will be
           met:
           1.   List of proposed materials with recycled content. Indicate post-consumer
                recycled content and pre-consumer recycled content for each product having
                recycled content.
           2.   Product data and certification letter indicating percentages by weight of post-
                consumer and pre-consumer recycled content for products having recycled
                content.
           3.   List of proposed materials with rapidly renewing content. Indicate rapidly
                renewing content percentage for each product having rapidly renewing
                content.

      E.   Selection Samples: For each finish product specified, two complete sets of color
           chips representing manufacturer's full range of available colors and patterns.




                                          10660-2
      F.   Verification Samples: For each finish product specified, two samples, minimum size
           12 inches (305 mm) square, representing actual product, color, and patterns.

      G.   Manufacturer's Certificates: Certify products meet or exceed specified requirements.

1.6   QUALITY ASSURANCE

      A.   Manufacturer Qualifications: Glass partition manufacturer to have minimum five
           years documented experience in the fabrication of glass partitions of the type
           required for this project and be capable of providing field service representation
           during installation.

      B.   Installer Qualifications: Minimum 2 years documented experience in work of this
           Section and approved by partition system manufacturer.

1.7   DELIVERY, STORAGE, AND HANDLING

      A.   Store products in manufacturer's unopened packaging until ready for installation.

      B.   Protect materials from damage and exposure to moisture.

1.8   SEQUENCING

      A.   Ensure that locating templates and other information required for installation of
           products of this section are furnished to affected trades in time to prevent
           interruption of construction progress.

      B.   Ensure that products of this section are supplied to affected trades in time to prevent
           interruption of construction progress.

1.9   PROJECT CONDITIONS

      A.   Maintain environmental conditions (temperature, humidity, and ventilation) within
           limits recommended by manufacturer for optimum results. Do not install products
           under environmental conditions outside manufacturer's absolute limits.

      B.   Field Measurements: Verify opening dimensions of all-glass partitions by field
           measurements before fabrication and indicate the measurements on Shop
           Drawings. Coordinate fabrication schedule with construction progress to avoid
           delaying the Work.

1.10 COORDINATION

      A.   Coordinate Work with other operations and installation of adjacent surfaces to avoid
           damage to installed materials.

      B.   Coordinate work with adjacent floor, wall, and ceiling construction to accommodate
           frame anchorage, track, and concealed hardware.

      C.   Coordinate work with concrete floors and floor finishes for adequate tolerances and
           clearances between panels and floor finish.

PART 2 PRODUCTS

2.1   MANUFACTURERS

      A.   Acceptable Manufacturer: Avanti Systems USA, which is located at: 200 William St.
           Suite 306 ; Port Chester, NY 10573; Toll Free Tel: 877-282-6843; Tel: 914-934-



                                           10660-3
           9093; Email: request info; Web: www.avantisystemsusa.com

      B.   Substitutions: Not permitted.

      C.   Requests for substitutions will be considered in accordance with provisions of
           Section 01600.

2.2   FULL HEIGHT SINGLE GLAZED PARTITION SYSTEM

      A.   Solare full height, relocatable, single dry glazed glass partition system as
           manufactured by Avanti Systems USA. Aluminum or frameless glass can be
           specified as part of this section.
           1.     Configuration:
                  a.     Straight Wall.
                  b.     Curved Wall.
                  c.     As indicated on the Drawings.
           2.     Single Glazed.
                  a.     3/8 inch (10 mm) clear tempered glass.
                  b.     1/2 inch (12 mm) clear tempered glass.
                  c.     Nominal 7/16 inch (11 mm) laminated glass.
                  d.     Nominal 9/16 inch (13 mm) laminated Lunar LCD Privacy Glazing,
                         liquid crystal display switchable privacy glass.
           3.     Head and Sill Channels:
                  a.     Extruded 1 inch (25 mm) aluminum, 2 piece glazing channels with
                         brush seals.
                  b.     Hardwood channel track.
                  c.     Setting blocks provided as required.
                  d.     Provide end covers or channel end caps as required.
           4.     Vertical Wall Trim:
                  a.     Wall/Aluminum: Extruded aluminum 1 inch (25 mm) face size, 2 piece
                         frame with brush seals for glazing joints.
                  b.     Drywall: Extruded aluminum flush glazing drywall insert with brush
                         seals for glazing joints.
                  c.     Wall/Wood: Hardwood channel track.
           5.     Glass Joints:
                  a.     Vertical Joints:
                         1)      Translucent H sections.
                  b.     Corner Joints:
                         1)      Extruded aluminum 90 degree junction sections.
           6.     Doorframes:
                  a.     Extruded aluminum slimline door frame with 2 inch by 2-1/4 inch (51
                         mm by 57 mm) deep, one piece construction and brush seal door
                         seals.
                  b.     Hardwood Frame with brush seal door seals.

2.3   FULL HEIGHT ACOUSTICAL DOUBLE GLAZED PARTITION SYSTEM

      A.   Solare Acoustic full height, relocatable, double/twin dry glazed glass partition system
           as manufactured by Avanti Systems USA. Aluminum or frameless glass can be
           specified as part of this section.
           1.     Configuration:
                  a.    Straight Wall.
                  b.    Curved Wall.
                  c.    Facetted Wall.
                  d.    As indicated on the Drawings.
           2.     Double Glazed.
                  a.    3/8 inch (10 mm) clear tempered glass and 3/8 inch (10 mm) clear


                                           10660-4
                        tempered glass. Sound reduction 42 Rw (db).
                 b.     3/8 inch (10 mm) clear tempered glass and nominal 3/8 inch (10 mm)
                        laminated glass. Sound reduction 45 Rw (db).
                 c.     1/2 inch (12 mm) clear tempered glass and nominal 3/8 inch (10 mm)
                        laminated glass. Sound reduction 47 Rw (db).
           3.    Twin Glazed.
                 a.     3/8 inch (10 mm) clear tempered glass with 5 inch (127 mm) air gap
                        and a second 3/8 inch (10 mm) clear tempered glass. Sound reduction
                        49 Rw (db).
                 b.     1/2 inch (12 mm) clear tempered glass with 5 inch (127 mm) air gap
                        and a second 1/2 inch (12 mm) clear tempered glass. Sound reduction
                        49 Rw (db).
           4.    Head and Sill Channels:
                 a.     Extruded 1 inch (25 mm) aluminum, 2 piece glazing channels with
                        brush seals.
                 b.     Setting blocks provided as required.
                 c.     Provide end covers or channel end caps as required.
           5.    Vertical Wall Trim:
                 a.     Wall/Aluminum: Extruded aluminum 1 inch (25 mm) face size, 2 piece
                        frame with brush seals for glazing joints.
                 b.     Drywall: Extruded aluminum flush glazing drywall insert with brush
                        seals for glazing joints.
           6.    Glass Joints:
                 a.     Vertical Joints:
                        1)     Translucent H sections.
                 b.     Corner Joints:
                        1)     Extruded PVC 90 degree junction section.
           7.    Doorframes:
                 a.     Extruded aluminum double glazed door frame with brush seal door
                        seals.
                 b.     Hardwood Frame with brush seal door seals.
                 c.     Eclipse Plus integrated frameless frame for sliding doors running
                        between double glazing.

2.4   FREESTANDING GLASS PARTITION SYSTEM

      A.   Elite Freestanding relocatable, dry glazed partition system as manufactured by
           Avanti Systems USA. Aluminum-framed or frameless glass can be specified as part
           of this section.
           1.      Configuration:
                   a.    Straight Wall.
                   b.    Curved Wall.
                   c.    As indicated on the Drawings.
           2.      Single Glazed.
                   a.    3/8 inch (10 mm) clear tempered glass.
                   b.    1/2 inch (12 mm) clear tempered glass.
                   c.    Nominal 7/16 inch (11 mm) laminated glass.
                   d.    Nominal 9/16 inch (13 mm) laminated Lunar LCD Privacy Glazing,
                         liquid crystal display switchable privacy glass.
           3.      Bottom Track:
                   a.    Extruded 1 inch (25 mm) aluminum, 2 piece glazing channels with
                         brush seals.
                   b.    Setting blocks provided as required.
                   c.    Glazing gaskets molded or extruded shape to fit glazing channel
                         retaining slot.
                   d.    Provide end covers or channel end caps as required.



                                         10660-5
           4.    Vertical Wall Trim:
                 a.     Wall/Aluminum: Extruded aluminum 1 inch (25 mm) face size, 2 piece
                        frame with brush seals for glazing joints.
           5.    Glass Joints:
                 a.     Vertical Joints:
                        1)     Translucent H sections.
                 b.     Corner Joints:
                        1)     Extruded aluminum 90 degree junction sections with brush seals.
           6.    Doorframes:
                 a.     Extruded aluminum slimline door frame with brush seal door seals.

2.5   GLASS PARTITION DOORS

      A.   Sliding Doors:
           1.     Eclipse frameless surface mounted, sliding glass doors with tempered glass
                  of minimum thickness matching glass partition.
           2.     Eclipse Plus integrated frameless sliding doors running between double
                  glazing with tempered glass of minimum thickness matching glass partition.
           3.     Hardware: Frameless surface mounted hardware.
                  a.     Sliding Door Devices: Top hung solid stainless steel components with
                         roller assembly fitting over exposed 25 mm diameter solid stainless
                         steel support bar with rubber cushioned stops for single and double
                         doors. Tubular rails not permitted.
                  b.     Overpanel to sidelight connections to be L shaped support brackets.
                         Inline connectors not permitted.
                  c.     Corner junctions to be variable angle devices. Fixed devices are not
                         permitted.
                  d.     Tubular Pull: Stainless steel with a brushed finish, 48 inches (1219
                         mm) long 5/16 inch (8 mm) diameter.

      B.   Pivoted Doors:
           1.    Eclipse frameless surface mounted pivoted glass doors with tempered glass
                 of minimum thickness matching glass partition.
           2.    Sound Rating: Up to 35 Rw (db) in accordance with BS5281; Part 1, 1084
                 when used with full height acoustical double glazed partition system.
           3.    Hardware
                 a.     Tubular Pull: Stainless steel with a brushed finish, 48 inches (1219
                        mm) long 5/16 inch (8 mm) diameter.
                 b.     Pivots: Patch type with ANSI A156.4, Grade 1, compact design floor-
                        concealed door pivot and closer with 90 degree hold open check.
                        1)     Adjustable spring power allows the necessary adjustment.
                        2)     Controlled closing with two independent valves.
                        3)     Non-handed.
                        4)     Brushed stainless steel finish.

      C.   Acoustic Doors:
           1.    35db Sound Reduction
           2.    European Style Construction / Fitting
           3.    Aluminum Frame w/ Acoustic Seals
           4.    Available with variety of middle options including blinds, glass, LCD Glass.

      D.   Hinged Doors:
           1.   Flush wood hinged doors 1-3/8 inches (44 mm) thick as specified in Section
                08210.
           2.   Flush wood hinged doors 1-3/8 inches (44 mm) thick.
                a.    Cherry.
                b.    Ash.


                                           10660-6
                  c.      Oak.
                  d.      Beech.
                  e.      Maple.
                  f.      Species, as selected by the Architect from the manufacturers full range.
           3.     Frameless glass hinged doors with minimum thickness to match glass
                  partition.
           4.     Hardware:
                  a.      Lever Model: _____________.
                  b.      Knob Model: _____________.
                  c.      Cylinder: _____________.
                  d.      Hinges: ______, patch type for glass doors.
                  e.      Closers: Overhead patch type.

2.6   MATERIALS

      A.   Aluminum Extrusions:
           1.    ASTM B 221, 6063-T6 alloy and temper.
           2.    Recycled content: Minimum 75 percent, with minimum 40 percent classified
                 as post consumer.

      B.   Stainless Steel Fittings: Type 304 stainless steel conforming to ASTM A 276.

      C.   Wood: Hardwood: FSC certified.
           1.   Cherry.
           2.   Ash.
           3.   Oak.
           4.   Beech.
           5.   Maple.
           6.   Species, as selected by the Architect from the manufacturers full range.

      D.   Glass:
           1.     Clear tempered glass: ASTM C 1048, Type 1 transparent flat, Class 1 clear,
                  Quality q3 glazing select, Kind FT fully tempered, thickness specified.
           2.     Laminated glass: ASTM C 1172, consisting of two layers of , thickness
                  specified with:
                  a.     Clear glass with clear plastic interlayer.
                  b.     Clear glass with translucent plastic interlayer.
           3.     Lunar LCD Privacy Glazing: Liquid crystal display switchable privacy glass.
                  a.     Requires 120 VAC connections for operation.
                  b.     Provide with single switch.
                  c.     Provide with 3 way switch.
                  d.     Color:
                         1)     Neutral.
                         2)     Grey.
                         3)     Green.
                         4)     Bronze.
                         5)     Blue.
                         6)     As selected by the Architect.
           4.     Custom glass: As selected by the Architect.

      E.   Glazing Gaskets: ASTM C 864, neoprene or EPDM, or ASTM C 1115, silicone or
           thermoplastic polyolefin rubber, molded or extruded shape to fit glazing channel
           retaining slot.

      F.   Fasteners: Type best suited to application.

      G.   Wood Doors: Specified in Section 08210.



                                           10660-7
      H.   Door Hardware: Specified in Section 08710.

      I.   Blinds:
           1.     Type:
                  a.    Horizontal louver.
                        1)     Wood.
                        2)     Aluminum.
                        3)     Vinyl.
                        4)     Size:
                               a)     1 inch (25 mm) slat.
                               b)     1/2 inch (12.5 mm) slat.
                  b.    Vertical louver.
                        1)     Wood.
                        2)     Aluminum.
                        3)     Vinyl.
                        4)     Size:
                               a)     3-1/2 inch (89 mm) slat.
                               b)     __ inch (__ mm) slat.
                        5)     Slats:
                               a)     Solid.
                               b)     Perforated.
                  c.    Color: As selected by Architect from manufacturer's full color range.

2.7   FINISHES

      A.   Aluminum: AAMA 2604, polyester powder coating stock color RAL 9006 metallic
           silver.

      B.   Aluminum: AAMA 2604, polyester powder coating custom color as selected by the
           Architect selected from manufacturer's full color range.

      C.   Stainless Steel Fittings: Satin finish.

      D.   Wood: Manufacturer's standard satin polyurethane finish.

      E.   Wood: Manufacturer's standard gloss polyurethane finish.

      F.   Wood: Manufacturer's standard stain and polyurethane finish as selected by the
           Architect selected from manufacturer's full color range.

      G.   Wood: Finish to match wood doors specified in Section 08210.

2.8   FABRICATION

      A.   Accurately fit and secure joints and intersections.

      B.   Make joints flush and hairline.

      C.   Prepare components to receive anchor devices and hardware. Fabricate anchorage
           items.

      D.   Arrange fasteners, attachments, and jointing to ensure concealment from view.

PART 3 EXECUTION

3.1   EXAMINATION

      A.   Do not begin installation until substrates have been properly prepared.



                                             10660-8
      B.   Verify wall openings are ready to receive work of this section.

      C.   Verify concealed overhead structural supports are sized and located properly.

      D.   Insure finished floor under operable glass partition is level plus or minus 1/8 inch in
           10 feet (3 mm in 3 m) non-cumulative.

      E.   If substrate preparation is the responsibility of another installer, notify Architect of
           unsatisfactory preparation before proceeding.

3.2   PREPARATION

      A.   Clean surfaces thoroughly prior to installation.

      B.   Prepare surfaces using the methods recommended by the manufacturer for
           achieving the best result for the substrate under the project conditions.

3.3   INSTALLATION

      A.   Install in accordance with manufacturer's instructions and approved Shop Drawings.

      B.   Use anchorage devices to securely attach assembly to structure.

      C.   Install components plumb and level, in proper plane, free from warp and twist.

      D.   Install glass and accessories in accordance with GANA Glazing Manual.

      E.   Installation Tolerances:
           1.      Maximum variation from plumb or level: 1/8 inch in 3 feet or 1/4 inch in any 10
                   feet, whichever is less.
           2.      Maximum misalignment of members abutting end to end: 1/16 inch.

3.4   ADJUSTING

      A.   Adjust doors for smooth operation throughout full operating range.

3.5   PROTECTION

      A.   Protect installed products until completion of project.

      B.   Touch-up, repair or replace damaged products before Substantial Completion.

3.6   CLEANING

      A.   After installation and adjusting clean metal and glass surfaces to remove dust, loose
           fibers, fingerprints, adhesives, and other foreign materials.

3.7   SCHEDULES

      A.   :

      B.   :

                                       END OF SECTION




                                             10660-9

				
DOCUMENT INFO
Shared By:
Categories:
Tags: ARCAT, spec, brush
Stats:
views:21
posted:7/3/2010
language:English
pages:9
Description: ARCAT spec ava brush