VIEWS: 0 PAGES: 1 CATEGORY: Forms POSTED ON: 2/26/2009
REQUEST FOR INSPECTION FORM Name of project: Owner: Project Site Address: Architect/Designer: Contact: Ph: Fax: Email: General Contractor: Contact: Ph: Fax: Email: Bonding Company (If applicable): Architectural Woodwork Supplier: Contact: Ph: Fax: Email: Architectural Woodwork Installed by: Architectural Woodwork Finished by: Finished at: Shop Site (Check one ) AMOUNT OF MILLWORK CONTRACT: $ Date of Tender: Is this a phased project? Special Comments: APPROXIMATE SCHEDULE: 1. Shop Drawings ready for review: 2. Typical unit ready for inspection: 3. Installation starts: 4. Installation complete: The undersigned contractor or firm agrees to pay the Architectural Woodwork Manufacturers Association (local chapter) the inspection fee based on the contract price shown above, or the contract price at date of substantial completion, if greater. Further, it is agreed that costs for extra inspections as a result of deficiencies noted on a final inspection report will be the contractor’s responsibility. Any applicable taxes will be extra. AWMAC member firms will be invoiced as Inspection Reports are released. Non-member firm payments to be received before Inspection Reports are released. NOTE: THE ARCHITECTURAL WOODWORKER IS REQUIRED TO TAKE TEMPERATURE AND HUMIDITY READINGS WHEN ON SITE. CALL THE CHAPTER OFFICE FOR AN OFFICIAL TEMPERATURE AND HUMIDITY FORM. Dated: Signed: ASSIGNED INSPECTOR: SHOP DRAWINGS, MATERIALS AND METHODS INFORMATION FORM, AND ALL PERTINENT PROJECT DOCUMENTS TO BE DELIVERED TO THE AWMAC CHAPTER OFFICE.
Pages to are hidden for
"REQUEST FOR INSPECTION FORM Request Inspection Home Inspection pest control Home Inspector inspection results Inspection Services pest management Home Inspections Request Form"Please download to view full document