Aqueous parts cleaner makes less waste
Typhoon Pro Oil Eater’s 45-gal. water-based parts washer, built with an indus-
trial-grade HDPE resin tank, is designed to reduce the need and
Blow Gun cost of disposal while offering long and trouble-free operation.
Kimball Midwest’s The unit can be heated to 110 degrees F by a 1,000W heater
Typhoon Pro that shortens heat-up time. Other features include:
Blow Gun blows • Separate heater and pump switches with lighted on/off
off heavy dust, indicators.
dirt, shavings, • Filter system prolongs fluid life.
chips and accu- • Flexible spigot, flow-through brush and a stainless-steel work
mulations from shelf.
equipment surfaces from • Protection is provided with a ground fault interrupter.
15’ to 20’ away, providing • Work station measures 24” by 32” by 9”.
powerful clean-up. It delivers • Two 5-gal. pails of Oil Eater cleaner/degreaser are included with the unit.
up to 34 cfm at 125 psi, and Circle 94 on inquiry card or click E-INQUIRY at PTEN.com
over 2 lbs. of thrust. A variable-
flow trigger provides full control, Maximum durability and portability
while an all-metal construction Providing a compact, economical alternative to belt-driven models while yielding the pro-
allows the Typhoon to withstand fessional performance of commercial-grade units, Jenny’s pressure washers
heavy-duty use. It is chrome- are designed for maximum durability and portability. Powered by 9 hp or 13
plated to resist chemicals and hp Honda GX-series engines, these washers are available with pressure
solvents. ratings between 3,000 psi and 4,000 psi, and flow rates that
Circle 93 on inquiry card vary between 3 gpm and 4 gpm. All models feature a triple