* Reels include two 40' x 1/2'' new oil reels, a 45' x 1/2'' air reel, 35' x 3/4'' waste oil reel with quick couplers, 40' x 3/8'' grease reel with control handle and a control panel with 150# regulator

More Info
                                                                                SUPPORT EQUIPMENT

Trench Grader
Asphalt Spreader
is avail-
able in
three                                       MB Model HL
units and
is designed for asphalt repairs.            Power Broom                               PWCE Extendable
                                            The Model HL attachment power
• Grades and smoothes asphalt in
  one pass                                  broom is designed for work with
                                                                                      The Extendable Dipper from Paul
• 12- to 72-inch adjustable chutes          skid steers, compact wheel load-
                                                                                      Wever Construction Equipment fits
• Up to 6 inch depths                       ers and tractor loaders with a
                                                                                      full-size and mini-excavators, as
WRITE IN 214 ON INQUIRY CARD                minimum of 12 gpm.
                                                                                      well as backhoe-loaders.
                                            • Hydraulic angle change 30° left/right
                                                                                      • Installs easily
                                            • 5-, 6-, 7- and 8-foot broom widths
                                                                                      • Provides up to 30% more reach
                                            • 32-inch-diameter brush
                                                                                      • Auxiliary hydraulics available
                                            • Four-point self-centering swing
                                                                                      • Transports with the machine
                                                                                      • Able to lift heavy loads
                                            • Brush hood covers 155°
                                                                                      WRITE IN 218 ON INQUIRY CARD
                                            • Heavy-duty spline shaft hydrau-
                                              lic motor or low-flow, high-torque
                                              motor available
                                            WRITE IN 216 ON INQUIRY CARD

Zanetis RoadHog
Milling Attachments
The updated self-powered
RoadHog milling attachments
for loader-backhoes are powered
by 76-hp John Deere PowerTech                                                         General 130C
turbocharged four-cylinder Tier III-
compliant diesel engines.                   Coneqtec AP                               Cut-R-Tach
                                                                                      The 130C Cut-R-Tach is designed
• Available in 30- and 40-inch cutting
  widths with an 8-inch cutting depth
                                            Cold Planers                              for many asphalt cutting projects,
                                            These heavy-duty planers are              such as road patching, scoring
  capability                                equipped with high-torque, direct-        and edging, and various tasks for
• Cutting drum can be sideshifted           drive motors.                             pipeline, street, water and sewer
  hydraulically to the right side for       • Four-wheel front down design and        applications.
  cutting shoulders or against curbs          center pivot eliminates bouncing        • Clamps to most backhoe dip-
• Features hydraulic tilt (slope) control    
To top