The 880F4 hydraulic concrete saw offers bar lengths up to 25 in. and comes standard with the FORCE4 guide- bar and drive sprocket, enabling it to drive larger chain. It is designed to make square corners with no overcuts. A flush cut version (8804F-FL) also allows for cuts within 3/16 in. from walls or floors. The 8-gpm configuration generates 11.5 hp and 122 (880F4) or 130 in.-lbs. (880F4-FL) of torque, while the 12-gpm configuration generates 17.5 hp and 172 (880F4) or 207 in.-lbs. (880F4-FL) of torque.
Concrete I Saws Diamond Products F ollowing is a look at a variety of concrete saws for your jobsite cutting applications. For details on any of these products, turn to the reader ser- vice card following page 16. To find more information on concrete saws and Core Cut CC150-EE The Core Cut CC150-EE early entry green walk-behind concrete accessories, visit the Equipment Connection at ForConstructionPros.com. saw is powered by a 4.8-hp Honda GX-160 engine. Its 6-in. blade with 1-in. arbor offers a maximum cutting Doosan WS-Series Saws depth of 1 3/16 in. Features include a pat- The WS-Series concrete saws include seven ent-pending skid plate adjustment mechanism, models with 12- to 36-in. blades and cut- mechanical blade depth control and two front polyurethane, ting depths from 4.6 to 15 in. Power is pro- non-marking wheels for greater stability. vided by 8- to 20-hp Honda or 31- or 57-hp Indicate 71 on inquiry card Deutz engines. The units offer manual propulsion with recoil starting or hydro- static propulsion with electric start. They ICS 880F4 feature larger, screw-type depth control, a multi-belt drive, universal dual 1-in. arbor Concrete Saw The 880F4 hydraulic with drive pin and heavy-duty, seven-gauge concrete saw offers bar steel frame and steel splashguards. lengths up to 25 in. and comes Indicate 81 on Inquiry Card standard with the FORCE4 guide- bar and drive sprocket, enabling it to Chicago Pneumatic Hydraulic Saws drive larger chain. It is designed to make square corners The SAW 16 hydraulic-powered cutoff saw has a 16-in. blade and with no overcuts. A flush cut version (8804F-FL) also allows for cuts within cuts to a depth of 6.3 in., while the SAW 14 has a 14-in. blade 3/16 in. from walls or floors. The 8-gpm configuration generates 11.5 hp and with a 5.2-in. maximum cutting depth. Suited 122 (880F4) or 130 in.-lbs. (880F4-FL) of torque, while the 12-gpm configura- for cutting concrete, asphalt, cement, brick and tion generates 17.5 hp and 172 (880F4) or 207 in.-lbs. (880F4-FL) of torque. steel, the units features a simple direct-drive con- Indicate 72 on inquiry card figuration, adjustable blade guard and optional lightweight, easy to use cart. The power source can be positioned as much as 75 ft. away. Stone Saw Devil Concrete Saws Indicate 82 on Inquiry Card The CS1 and CS2 manual and CSP3 self-propelled Saw Devil concrete saws come in sizes and configu- rations for concrete and asphalt flat sawing to depths of 7 5/8 in. A positive feed, self-locking acme screw raises and lowers the blade quickly. The easy to remove, heavy-duty blade guard is contoured to reduce slurry buildup. To mini- mize vibration to the operator, the units feature ergonomically designed, adjustable handles with padded hand grips and hip control bar and a vibration- reducing, all-steel box frame. Indicate 76 on inquiry card MK Diamond Water-cooled Saws This line of self-propelled concrete saws features low-vibration, water-cooled engines meeting CARB and EPA emission standards. The MK-4000HY fea- tures a 48-hp Hyundai 416 four-cylinder in-line, DOHC, liquid-cooled gaso- line engine. The MK-4000KB has a 44-hp Kubota V1505-T-E3B, four- cylinder in-line, tur- bocharged, liquid-cooled diesel engine. Both models are available with 18-, 24-, 30- and 36-in. blade guards and include a T-handle traverse control and variable plunge speed control. Indicate 70 on inquiry card The right tool for the job. The Husqvarna K 3000 Electric Cut-n-Break is ideal for cutting window and door openings, crack chasing, joint repair and much more. A unique MBW FS1C-18 Floor Saw The FS1C-18 Floor Saw features a low center of gravi- sliding guard can be positioned for flush cutting and the low water usage ty and weight distribution arranged to eliminate flex system along with an electric motor offer maximum versatility for and vibration during operation. The cutting depth indoor and outdoor use. gauge is calibrated for the blade size. A heavy-duty, two-piece, hinged, spring-tensioned blade guard fea- The Cut-n-Break method allows you to cut in stages through walls up to tures positive up or down positioning and mounts 16" thick. Initially, a cut up to 2-1/2" deep is made with fast cutting, twin to either side. Features include an adjustable guid- 9" blades. The remaining central core is then easily broken out with the ing handle, fluted, removable water manifolds companion breaking tool. Finally, successive cuts can be made to reach that deliver up to 5 gpm and an optional water up to 16" deep. tank conversion kit. HUSQVARNA CONSTRUCTION PRODUCTS Indicate 73 on inquiry card 17400 West 119th Street • Olathe, KS 66061 • T 800-288-5040 • F 800-825-0028 www.husqvarnacp.com Copyright © 2009 Husqvarna AB (publ.). All rights reserved. Husqvarna is a registered trademark of Husqvarna AB (publ.). Indicate 75 on inquiry card 22 EQUIPMENT TODAY • August 2009 Husqvarna K 3000 CS Unitec Pneumatic Concrete Chain Saw Electric Cut-n-Break The CS 536163-2 plunge cuts up to 15 in. deep in one pass and quickly The K 3000 Electric Cut-n-Break is able cuts mechanical openings, irregular shapes and square corners up to 14 to cut in stages through walls up to 16 in. with no overcuts. It is suited for cutting reinforced concrete, brick, in. thick, making it suited for window block, concrete pipe and natural stone. Standard AirFORCE F4 dia- and door openings, crack chasing, joint mond saw chains offer larger diamond segments and 50% greater tensile repair and more. Its sliding guard can strength. The 10- or 15-in.-long guidebars also be positioned to flush cut. The unit include laser-cut internal water channels is powered by a 12V, 15-amp electric to keep the bar lubri- motor. Its wet cutting system supplies cated and help to remove enough water to suppress dust but not slurry. The 6.5-hp air cause excessive slurry. Other features motor has a no load include Elgard overload protection and speed of 5,700 rpm. SoftStart for gradual starting. Indicate 74 on inquiry card Indicate 77 on inquiry card HARBOR FREIGHTPrices Quality Tools at the LOWEST TOOLS WHY WE HAVE 10 MILLION SATISFIED CUSTOMERS: FACTORY DIRECT √ We Buy Factory Direct and Pass the SAVINGS on to YOU!
Pages to are hidden for
"Concrete Saws"Please download to view full document