3D Snowflake by Ishan Rathi 10D by rashkath

VIEWS: 657 PAGES: 11

How to make a 3d paper snow
Step 1

Assemble material :- stapler , scale , cutter , pencil , paper
Step 2

 Fold each of the 6 pieces of paper in half , diagonally .If the paper you’re using
doesn’t make a perfect triangle , cut of the edge that sticks out (rectangular edge)
and make it align perfectly . Cut three lines each sides of the triangle from the
folded edge , making sure not to cut the unfolded paper edges.
Step 3

Unfold your paper .
Step 4

  Keeping your paper diamond side up , roll the first two innermost paper
 lines together to form a tube . staple these two pieces together . You should
 see triangle shapes on each side of the roll.
Step 5

Turn the diamond over to the other side . Take the next two paper lines and pull
them together on the opposite side of the tube and staple them together as
before . This will be more rounded shape and wider than the first tube.
Step 6

  Keep turning the paper and joining the paper lines together on the
  opposite side until all paper lines have been joined . Repeat this process
  with the remaining 5 pieces of paper .
Step 7

Join three of the completed rolled pieces together at one end and staple
them. Do the other three pieces the same way . Now you will have two pieces
consisting of three strands of “arms” each.
Step 8

  Staple the two new pieces in the middle and staple where each of the
  6 arms meet. This ensures that snowflake shape is pulled into place.
Finished snowflake

To top