Lake Simcoe Water Pollution Control Plant WPCP The plant consists of Preliminary Treatment Secondary Treatment and Tertiary Treatment The design average flow for the Lake Simcoe Water Pollution by bed12471

VIEWS: 15 PAGES: 1

									Lake Simcoe Water Pollution Control Plant (WPCP)
The plant consists of Preliminary Treatment, Secondary Treatment and Tertiary Treatment.
The design average flow for the Lake Simcoe Water Pollution Control Plant is 4,500 m3/d.
Through equalization flow control, the plant is capable of handling different peak flows through
the three stages.

Various levels as well as modes of control are provided. All pertinent equipment can be
controlled through operator workstations. The plant control and monitoring system is based on
three programmable logic controllers (PLCs) with two operator workstations, tied on an
Ethernet network. Local panel mounted OITs (Operator Interface Terminals) are also provided.

The PLCs are GE Fanuc 90/30 series, and the SCADA software is CIMPLICITY.

Each device/unit control adheres to stringent standards for actual control as well as fault
monitoring. Standard logic templates are used for all devices/units. Local/Remote control
transfer from one level in the control hierarchy to another is designed to be bumpless.

Operator screens are both functional and intuitive, while taking into account client preferences
and requirements.




MAAK Technologies Group Inc., 9133 Leslie Street, Suite #201, Richmond Hill, Ontario, Canada L4B 4N1 Tel: 905-326-9833 Fax: 905-326-9838

								
To top