A Tutorial on Introduction to Analog and Mixed Signal

							A Tutorial on “ Introduction to Analog and Mixed Signal VLSI Testing”

The topics to be covered in this tutorial are:

1. Introduction to Test:
    ♣ Overview
    ♣ Analog, Digital, or Mixed Signal?
    ♣ Why Device Testing?
    ♣ Test & Diagnostic Equipment
    ♣ Test Challenges
2. DC & Parametric Measurements
    ♣ Continuity
    ♣ Leakage
    ♣ Power Supply Current
    ♣ DC Reference & Regulators
    ♣ Impedance Measurement
    ♣ DC Offset
    ♣ DC Gain
    ♣ DC Power Supply Rejection Ratio
    ♣ DC Common Mode Rejection Ratio
    ♣ Comparator DC Test

3. Analog and Mixed Signal Testing

♣ Case Study I : Analog Testing Methodology
♣ Case Study II: Mixed Signal Testing Methodology

4. How DSPs and FPGAs are widely used in Mixed Signal Testing


CV of Speaker (Tutorial)

Wong Shee Kian, 30, has served ASB since January 2005 as R&D Manager. He was pro-
moted to Chief Technology Officer in 2006 and being appointed as Director of the com-
pany. Wong spent almost 3 years in Component Applications group, Altera Corporation,
Malaysia prior to joining ASB. Being the leader and pioneer of IBIS behavioral I/O mod-
eling group, Wong was responsible to characterize I/O buffers and develop tool specific
(IBIS, etc.) simulation models as part of the design collaterals to customers. Wong has
vast experience working on system-level signal integrity simulation and analysis. He pro-
vided training on topics related to signal integrity and behavioral modeling to various de-
partments or groups in Altera, including regional support centers as well as worldwide
Field Applications Engineers. Wong was also actively involved in various roll-out activi-
ties of new product from Altera. This includes new device check-out, evaluation and
characterization, as well as generation of technical collaterals such as datasheet, applica-
tion notes and white papers.
 Wong manages the R&D department and Applications department. He defines R&D
roadmap of the company, oversees R&D activities and new product introduction (NPI)
development. He also plays an important role in the design of Aemulus products.

 Wong has a Bachelor degree in Electrical Engineering from Universiti Malaya (UM). He
is currently pursuing Master of Engineering (Microelectronics) with Multimedia Univer-
sity (MMU).