SAFE HANDLING AND USE OF HYDROCARBONS by zxg15325

VIEWS: 0 PAGES: 2

									                                       Transcend ™ Additive


                    Transcend ™ Additive (Trans-1,2-Dichloroethylene)

       Table 1: Material Compatibility at Room Temperature – Weight Change
                               Material Compatibility (Weight % change)
 PLASTICS                                                  5 min 24 hours                                         100 hours
ABS (Poly(Acrylonitrile butadiene styrene))                                    Attack             Attack               Attack
PVC (Polyvinyl Chloride)                                                          1.2              34.5                 59.5
PET (Polyethylene terephthalate)                                                  0.1               1.0                  1.1
HDPE (High Density Polyethylene)                                                  0.2               6.2                 10.8
LDPE (Low Density Polyethylene)                                                   1.0              25.3                 29.0
HIPS (High Impact Polystyrene)                                                  Attack            Attack              Attack
PP (Polypropylene)                                                                0.6              20.9                 25.0
Nylon 66 (Polyamide 6.6)                                                          0.3               0.3                 -0.1
PC (Polycarbonate)                                                                4.6             Attack               Attack
PVDF (Polyvinylidene Fluoride)                                                    0.0               0.1                  0.2


ELASTOMERS                                                                      5 min          24 hours           100 hours
SBR (styrene butadiene)                                                          10.7             132.3                138.5
EPDM                                                                             11.4              99.8                 92.9
Neoprene (Polychloroprene)                                                       11.2             124.4                129.6
Hypalon                                                                          11.5             158.0                157.0
Silicone                                                                         16.9             205.7                208.6
Butyl Rubber (polyisobutene isoprene)                                            13.3             119.0                118.7
Natural Rubber                                                                   36.1             587.6                613.1
Viton                                                                             0.1               3.3                  6.4
Epichlorohydrin homopolymer                                                      11.6             183.1                191.3
v.1 August, 2003

BEFORE HANDLING THIS MATERIAL, READ AND UNDERSTAND THE MSDS (MATERIAL SAFETY DATA SHEET)
FOR ADDITIONAL INFORMATION ON PERSONAL PROTECTIVE EQUIPMENT AND FOR SAFETY, HEALTH AND
ENVIRONMENT INFORMATION.

The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since
the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema Inc.
expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such
information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR
ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE
INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specific product designated and may not
be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any
application before commercialization. Nothing contained herein should be taken as an inducement to infringe any patient and the user
is advised to take appropriate steps to be assured that any proposed use of the product will not result in patent infringement.
                                        Transcend ™ Additive


       Table 2: Material Compatibility at Room Temperature – Linear Change
Transcend ™ ( Sample Dimension: Length x Width x Thickness – 2.5” x 0.5” x 0.25”;
                            Material Compatibility (linear swell % change)
PLASTICS                                                    5 min 24 hours                                           100 hours
ABS (Poly(Acrylonitrile butadiene styrene))                                        attack           attack               attack
PVC (Polyvinyl Chloride)                                                            -0.3             11.3                 16.7
PET (Polyethylene terephthalate)                                                     0.0              -0.2                 0.5
HDPE (High Density Polyethylene)                                                     0.1              1.6                  2.7
LDPE (Low Density Polyethylene)                                                      0.7              6.1                  7.1
HIPS (High Impact Polystyrene)                                                     attack           attack               attack
PP (Polypropylene)                                                                  -0.1              4.3                  5.7
Nylon 66 (Polyamide 6.6)                                                             0.1              0.0                  2.0
PC (Polycarbonate)                                                                   1.6            attack               attack
PVDF (Polyvinylidene Fluoride)                                                       0.0              0.1                  0.0


ELASTOMERS                                                                         5 min         24 hours            100 hours
SBR (styrene butadiene)                                                              2.5             33.7                 33.1
EPDM                                                                                 2.6             20.9                 19.8
Neoprene (Polychloroprene)                                                           2.8             30.2                 29.7
Hypalon                                                                              3.8             36.9                 36.8
Silicone                                                                             4.8             41.7                 43.3
Butyl Rubber (polyisobutene isoprene)                                                2.5             23.2                 23.1
Natural Rubber                                                                       8.9             71.6                 77.3
Viton                                                                                0.0              1.1                  2.9
Epichlorohydrin homopolymer                                                          3.6             41.1                 44.4
 v.1 August 2003
 BEFORE HANDLING THIS MATERIAL, READ AND UNDERSTAND THE MSDS (MATERIAL SAFETY DATA SHEET)
 FOR ADDITIONAL INFORMATION ON PERSONAL PROTECTIVE EQUIPMENT AND FOR SAFETY, HEALTH AND
 ENVIRONMENT INFORMATION.

 The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since
 the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema Inc.
 expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such
 information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR
 ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE
 INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specific product designated and may not
 be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any
 application before commercialization. Nothing contained herein should be taken as an inducement to infringe any patient and the user
 is advised to take appropriate steps to be assured that any proposed use of the product will not result in patent infringement.

								
To top