Trouble Shooting Guide (CX6000) by nyb13813

VIEWS: 5 PAGES: 8

									                                CC8100 Profile 설정 방법

1. profile 생성

1.1 profile 이름 설정
localhost(config)# vdsl profile config premium [enter]
위 명령어 실행 시 profile mode로 변환


1.2 profile 속도 설정
localhost(config-profile)# speed downrate 8 uprate 4 [enter]
Speed Setting (8/4)


1.3 profile default SNR margin 설정
localhost(config-profile)# snr-margin down 6 up 6 [enter]
SNR margin value : (6/6)


1.4 profile power-backoff 설정
localhost(config-profile)# power-backoff on [enter]
Power Backoff ON !!


1.5 설정된 profile 확인
localhost# sh profile config
PROFILE
-----------------------------------------------------
Name :         premium
speed                     : (8/4)
compatible-mode : normal
interleave-depth : (0/0)
notch-filter         : domestic(off/off)
power-backoff             : ON
burst-protect         : (0/0)
snr-margin                : (6/6)




                                                        1      (주)코어세스
2. 설정된 Profile port 할당

2.1 port 할당
localhost(config)# port vdsl 1/1-3 profile config premium [enter] (ex: port slot 1, port 1,2,3 )


설정 후 console상에 display되는 massage
VDSL port 1/1 speed setting tx:8 rx:4
VDSL port 1/1 Power Backoff On
apply slot_port VDSL port 1/1 interleave-depth setting down: 0 up: 0
1/1-3 name: premium
VDSL port 1/1 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/1 compatible-mode: normal
Slot:1 Port:1 SNR MARGIN Setting down:6 up:6
profile |premiumVDSL port 1/2 speed setting tx:8 rx:4
| apply to slot:1 port:1
VDSL port 1/2 Power Backoff On
VDSL port 1/2 interleave-depth setting down: 0 up: 0
VDSL port 1/2 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/2 compatible-mode: normal
Slot:1 Port:2 SNR MARGIN Setting down:6 up:6
profile |premiumVDSL port 1/3 speed setting tx:8 rx:4
| apply to slot:1 port:2
VDSL port 1/3 Power Backoff On
VDSL port 1/3 interleave-depth setting down: 0 up: 0
VDSL port 1/3 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/3 compatible-mode: normal
Slot:1 Port:3 SNR MARGIN Setting down:6 up:6
profile |premium| apply to slot:1 port:3


2.2 port에 할당된 profile확인
localhost# sh port profile [enter]




  Port       Line profile                   Alarm profile
 ------ ----------------------   ----------------------
  1/1      premium



                                                      2                            (주)코어세스
1/2      premium
1/3      premium
1/4
1/5
1/6
1/7
1/8


3. 설정된 profile 수정


3.1 port에 할당된 profile회수
먼저 port에 할당된 profile부터 제거 한다.
localhost(config)# no port vdsl 1/1-3 profile config [enter]
prof name : premium is deleted from 1/1
prof name : premium is deleted from 1/2
prof name : premium is deleted from 1/3


3.2 회수된 profile확인
localhost# sh port profile
  Port       Line profile                   Alarm profile
 ------ ----------------------   ----------------------
  1/1
  1/2
  1/3
  1/4
  1/5
  1/6
  1/7
  1/8


3.3 설정된 profile 수정
이미 설정된 premium profile에서 default snr margin만 8db로 변경해보자!
변경 전 3.1에서처럼 port에 할당된 profile은 반드시 회수 되야 한다.
localhost(config)# vdsl profile config premium [enter]
localhost(config-profile)# snr-margin down 8 up 8 [enter]
SNR margin value : (8/8)



                                                   3           (주)코어세스
3.4 수정된 profile config 확인
localhost(config-profile)# end
localhost# sh profile config [enter]
PROFILE
-----------------------------------------------------
Name :         premium
speed                     : (8/4)
compatible-mode : normal
interleave-depth : (0/0)
notch-filter         : domestic(off/off)
power-backoff           : ON
burst-protect         : (0/0)
snr-margin                : (8/8)


3.5 Port에 수정된 profile 다시 할당
localhost(config)# port vdsl 1/1-3 profile config premium [enter]


VDSL port 1/1 speed setting tx:8 rx:4
VDSL port 1/1 Power Backoff On
apply slot_port VDSL port 1/1 interleave-depth setting down: 0 up: 0
1/1-3 name: premium
VDSL port 1/1 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/1 compatible-mode: normal
Slot:1 Port:1 SNR MARGIN Setting down:8 up:8
profile |premiumVDSL port 1/2 speed setting tx:8 rx:4
| apply to slot:1 port:1
VDSL port 1/2 Power Backoff On
VDSL port 1/2 interleave-depth setting down: 0 up: 0
VDSL port 1/2 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/2 compatible-mode: normal
Slot:1 Port:2 SNR MARGIN Setting down:8 up:8
profile |premiumVDSL port 1/3 speed setting tx:8 rx:4
| apply to slot:1 port:2
VDSL port 1/3 Power Backoff On
VDSL port 1/3 interleave-depth setting down: 0 up: 0



                                                        4                (주)코어세스
VDSL port 1/3 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/3 compatible-mode: normal
Slot:1 Port:3 SNR MARGIN Setting down:8 up:8
profile |premium| apply to slot:1 port:3


3.6 Port에 할당된 profile 확인
localhost(config)# end
localhost# sh port profile [enter]
  Port       Line profile                   Alarm profile
 ------ ----------------------   ----------------------
  1/1      premium
  1/2      premium
  1/3      premium
  1/4
  1/5
  1/6
  1/7
  1/8


4. 설정된 Profile제거

4.1 port에 할당된 profile제거
-3.1 참조


4.2 profile config 제거
localhost(config)# no profile config premium [enter]
localhost(config)# end


4.3 profile config 확인
localhost# sh profile config [enter]


[주의] port에 할당된 profile은 제거하지 않고 profile config만 삭제 시 port에는 기존의
profile config를 갖고 있다. 이럴 경우 기 설정된 port에 할당된 profile을 회수하거나[3.1참
조] 새로 지정할 profile config를 port에 재 지정해야 한다.




                                                   5                     (주)코어세스
5. profile premium로 설정된 port 외에 default 속도로 설정하는 방법

5.1 profile config 설정
localhost(config)# vdsl profile config lite [enter]
localhost(config-profile)# speed downrate 4 uprate 4 [enter]
Speed Setting (4/4)
localhost(config-profile)# snr-margin down 6 up 6 [enter]
SNR margin value : (6/6)
localhost(config-profile)# power-backoff on [enter]
Power Backoff ON !!


5.2 profile config 확인
localhost(config-profile)# end
localhost# sh profile config [enter]
PROFILE
-----------------------------------------------------
Name :         lite
speed                     : (4/4)
compatible-mode : normal
interleave-depth : (0/0)
notch-filter          : domestic(off/off)
power-backoff             : ON
burst-protect          : (0/0)
snr-margin                : (6/6)


5.3 기 설정된 premium profile외 나머지 port를 lite profile로 할당하기
localhost(config)# port vdsl 1/4-8 profile config lite [enter] (ex: 1/4-8)


VDSL port 1/4 speed setting tx:4 rx:4
VDSL port 1/4 Power Backoff On
apply slot_port VDSL port 1/4 interleave-depth setting down: 0 up: 0
1/4-8 name: lite
VDSL port 1/4 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/4 compatible-mode: normal
Slot:1 Port:4 SNR MARGIN Setting down:6 up:6
profile |lite| aVDSL port 1/5 speed setting tx:4 rx:4



                                                        6                    (주)코어세스
pply to slot:1 port:4
VDSL port 1/5 Power Backoff On
VDSL port 1/5 interleave-depth setting down: 0 up: 0
VDSL port 1/5 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/5 compatible-mode: normal
Slot:1 Port:5 SNR MARGIN Setting down:6 up:6
profile |lite| aVDSL port 1/6 speed setting tx:4 rx:4
pply to slot:1 port:5
VDSL port 1/6 Power Backoff On
VDSL port 1/6 interleave-depth setting down: 0 up: 0
VDSL port 1/6 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/6 compatible-mode: normal
Slot:1 Port:6 SNR MARGIN Setting down:6 up:6
profile |lite| aVDSL port 1/7 speed setting tx:4 rx:4
pply to slot:1 port:6
VDSL port 1/7 Power Backoff On
VDSL port 1/7 interleave-depth setting down: 0 up: 0
VDSL port 1/7 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/7 compatible-mode: normal
Slot:1 Port:7 SNR MARGIN Setting down:6 up:6
profile |lite| aVDSL port 1/8 speed setting tx:4 rx:4
pply to slot:1 port:7
VDSL port 1/8 Power Backoff On
VDSL port 1/8 interleave-depth setting down: 0 up: 0
VDSL port 1/8 NOTCH FILTER setting domestic<0> down: off<0> up: off<0>
VDSL port 1/8 compatible-mode: normal
Slot:1 Port:8 SNR MARGIN Setting down:6 up:6
profile |lite| apply to slot:1 port:8


5.4 port에 할당된 profile 확인
localhost# sh port profile [enter]
  Port       Line profile                   Alarm profile
 ------ ----------------------   ----------------------
  1/1      premium
  1/2      premium
  1/3      premium



                                                   7                     (주)코어세스
  1/4     lite
  1/5     lite
  1/6     lite
  1/7     lite
  1/8     lite


6. 저장하기
localhost# wr m [enter]
Building Configuration...
[OK]


                  위 내용은 premium과 lite profile을 예로 들어 작성되었음




                                 8                           (주)코어세스

								
To top