WELDING - unidoorg

Document Sample
WELDING - unidoorg Powered By Docstoc
					                                                      LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                    Hag     Halfait El   Souk El
 Item     Description                                                  Kerari                                      Kht 1
                                                                                   Yousif    Muluk        Mahali
  E.1     WELDING SUB-SECTOR
          Students Equipment
 E.1.1    Tool Box and General Safety Gear
E.1.1.1   Hacksaw frame, 300 mm                                         12                      24         12
          General purpose with an adjustable round steel tube
          bow frame for 250mm and 300mm blades. Shaped
          diecast handle. Supplied complete with a 250mm
          carbon steel blade
E.1.1.2   Engineer‟s hammer, 1000 g                                     12                      24         12
E.1.1.3   Flat file, second cut, 250 mm                                 12                      24         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.1.1.4   Hand file, second cut, 250 mm                                 12                      24         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.1.1.5   Halfround cabinet file, second cut, 250 mm                    12                      24         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.1.1.6   Round file, second cut, 250 mm                                12                      24         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.1.1.7   Square file, second cut, 250 mm                               12                      24         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.1.1.8   Three square file, second cut                                 12                      24         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.1.1.9 File Handle                                                     12                      24         12
E.1.1.10 Filecard cleaning brush                                        12                      24         12
         For the cleaning of files, etc. Filled with file card steel
         wire 360 points per square inch. Brush width 25mm.
         Filled Length: 90mm. Beechwood handle.
E.1.1.11 Cold Chisel, 12mm High quality octagonal steel stock           12                      24         12
         with ground cutting edge. Manaufatured and tested to
         BS3066 Width: 12mm Length 200mm
E.1.1.12 Cold Chisel, 19mm High quality octagonal steel stock           12                      24         12
         with ground cutting edge. Manufactured and tested to
         BS3066 Width: 19mm Length 250mm
E.1.1.13 Screwdriver, insulated, 4x100 mm                               12                      24         12
         Expert Quality, tested to 10kV, suitable for working on
         live circuits of 1kV AC and 1.5kV DC. Chrome
         molybdenum steel blades hardened, tempered and
         chemically blacked. Fully insulated handle and blade
         sheath for total safety.
E.1.1.14 Plain slot screwdriver, 8x150 mm                               12                      24         12
         Expert Quality, chrome vanadium steel blades
         hardened, tempered with satin chrome plated finish
         and shot blasted tips. The handle is manufactured from
         impact-resistant heavy duty „soft gripÕ polypropylene
         with colour coded handles for easy recognition. Most
         blades have hexagon bolsters which enable extra
         power to be obtained by use of a spanner.

E.1.1.15 Engineers precision square, flat, 150x100 mm                   12                      24         12
         Suitable for inspection rooms and test laboratories
         • Stainless steel or made from special carbon steel
         • Extra fine ground pattern
         • Flat or with back
E.1.1.16 Double ended scriber, 200 mm                                   12                      24         12
         Precision manufactured tool with hardened steel tips.
         Features straight and 90° tips with knurled body.
         Length: 200 mm

E.1.1.17 Centre punch, automatic, 125 mm                                12                      24         12
         Knurled brass barrel with spring loaded alloy steel
         point.
         Length: 125 mm




                                                                         1 of 46
                                                        LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                      Hag     Halfait El   Souk El
  Item     Description                                                   Kerari                                      Kht 1
                                                                                     Yousif    Muluk        Mahali
E.1.1.18 Adjustable sliding bevel, 200 mm                                 12                      24         12
         For standard joiners‟ and machinery use
         • Hardened steel blade, section 30x1,8 mm
         • Anodic coated aluminium handle with profile grooves,
         section 30x5 mm
         • With or without angle graduations on the handle
         available
         • With nickel plated fixing screw for locking the steel
         blade
E.1.1.19 Vice grip plier, 190 mm                                          12                      24         12
         Chrome Vanadium steel jaws hardened and tempered
         with industrial style satin finish. Deeply serrated jaws
         help grip workpiece. Riveted handle construction
         provides extra rigidity and reduces deformation when
         grip is under load. Spring- loaded locking mechanism
         prevents nipping fingertips when releasing.

           General-purpose pliers with reinforced teeth for a
           range of applications.
           Length: 190 mm
           Capacity: 0 - 42 mm

E.1.1.20 Steel Rule 300 mm/12", High quality steel rules                  12                      24         12
         permanently marked in Metric and Imperial
         graduations. Inlcudes hnaging hole. Length 300mm
E.1.1.21                                                                  12                      24         12
E.1.1.22 Bench brush, 280x70 mm                                           12                      24         12
E.1.1.23 Tool box, 5-tray, 530 mm, sheet steel, laquered                  12                      24         12
E.1.1.24 Welder‟s apron                                                   24                      48         24
         - chrome leather
         - with adjustable neck and waist straps
         - 70 x 90 cm
E.1.1.25 Safety goggles, clear lenses                                     32                      64         32
         BSEN166/B - Clear polycarbonate safety lens with
         direct ventilation in goggle frame.
E.1.1.26 Safety goggle with polycarbonate lens                            32                      64         32
         with polycarbonate lens, can be worn over spectacles.
         Frame of soft plastic material. Adjustable elastic band.




E.1.2      DRILLING, PEDESTAL, 28 MM / 30 MM
           Pillar drilling machine, 28 mm                                  1                      2           1
           . Spindle MT 4
           . Throat 254 mm
           . Speed range 120 - 1810 rpm
           . No. of speeds 9
           . Table size 475x425 mm
           INCLUDING:
 E.1.2.1   Machine vice, 125 mm                                            1                      2           1
           · Smooth running with exact jaw guiding, also at high
           axial load
           · Spindle with rolled trapezoid thread for smooth
           running
           · Multiple possibilities for assembly on the drilling table
           due to oblong holes
           Technical data:
           - Jaw width: 125 mm
           - Span: 110 mm
           - Jaw height: 30 mm
 E.1.2.2   Twist drill set, 14 to 30 mm                                    1                      2           1
           · 9 pcs; 14.5/16/18/20/22/24/26/28/30 mm
           · Wooden box
           · High service life
           · Good removal of chips
           · Right-hand cutting
 E.1.2.3   Reduction sleeve set, morse taper MT4-2 + MT4-3                 1                      2           1
 E.1.2.4   Ejecting drift set                                              1                      2           1
 E.1.2.5   Twist drill set, 1 to 13 mm                                     2                      2           2
           · 25 pcs; 1 - 13 mm
           · Metal box
 E.1.2.6   Machine clamp set, 52 pcs                                       2                      3           2
           · Handy wall unit
           · Metric thread
           · 24 pcs draw-in bolts
           · 6 pcs T-slot nuts
           · 6 pcs nuts
           · 4 pcs coupling nuts
           · 6 pcs step blocks
           · 12 pcs step clamps
           · T-slot nuts (size 18 mm) draw bar thread M 16




                                                                           2 of 46
                                                        LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                     Hag     Halfait El   Souk El
  Item     Description                                                  Kerari                                      Kht 1
                                                                                    Yousif    Muluk        Mahali
 E.1.2.7   Adjustable wrench set, 3 pcs, 20 mm, 25 mm, 34 mm              2                      4           2
           Hardened and heat treated steel with satin chrome
           finish. Fully polished, offset jaws. Slim raised lip style
           handle with hanging hole.
           Length: 150, 200, 250 mm
           Capacity: 20, 25, 34 mm


E.1.3      GRINDER, PEDESTAL, 200 MM
           Pedestal grinder , 200 mm                                      1                      2           1
           . Voltage 220-240V/1Ph/50-60Hz
           . Power 900 W
           . Speed 2800 rpm
           . Grinding wheel 200x25x20 mm,. Grit 36/80
           . Weight 24 kg
           INCLUDING:
 E.1.3.1   Pedestal                                                       1                      2           1
 E.1.3.2   Grinding wheel, 200x25x20 mm, grit 36                          1                      2           1
 E.1.3.3   Grinding wheel, 200x25x20 mm, grit 80                          1                      2           1
 E.1.3.4   Grinding wheel dresser, 150 mm                                 1                      2           1
           Aluminium alloy body with four star wheels. Suitable
           for cleaning, sharpening and trueing grinding wheel
           surfaces. Suitable for use with any grinder.
           Length: 150 mm

E.1.4      GRINDER, PEDESTAL, 300 MM
           Pedestal grinder , 300 mm                                      1                      2           1
           . Voltage 220-240V/1Ph/50-60Hz
           . Power 900 W
           . Speed 2800 rpm
           . Grinding wheel 300x25x20 mm,. Grit 36/80
           . Weight 24 kg
           INCLUDING:
 E.1.4.1   Pedestal                                                       1                      2           1
 E.1.4.2   Grinding wheel, 300x25x20 mm, grit 36                          1                      2           1
 E.1.4.3   Grinding wheel, 300x25x20 mm, grit 80                          1                      2           1
 E.1.4.4   Grinding wheel dresser, 150 mm                                 1                      2           1
           Aluminium alloy body with four star wheels. Suitable
           for cleaning, sharpening and trueing grinding wheel
           surfaces. Suitable for use with any grinder.
           Length: 150 mm

  E.1.5    BENCH LEVER SHEARING MACHINE
           Bench profile shear                                            1                      2           1
           . Steel plate 10 mm
           . Square 20x20 mm
           . Strip 90x14 mm
           . Round 22 mm
           . L/T steel 60x7 mm
           . Length of knives 170 mm


  E.1.6    BENCH SHEAR
           Bench shear                                                    1                      2           1
           . Steel plate 6 mm
           . Strip 70x6 mm
           . Round 13 mm
           . Length of knives 200 mm


  E.1.7    POWER HACKSAW




                                                                          3 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                 Hag     Halfait El   Souk El
 Item     Description                                               Kerari                                      Kht 1
                                                                                Yousif    Muluk        Mahali
          Power hacksaw                                               1                      1           1
          . Cutting capacity round 225mm,
          . Cutting capacity square 230 x 220mm
          . Max cutting degree 45°/120
          . Distance of strokes 140mm
          . Blade size 400 x 32 x 1.6 x 8.3
          . Main motor 2HP (1.5kw)
          Standard Accessories
          . Complete hydraulic system
          . Infinitely variable saw feed pressure control.
          . Complete electric components with motor protect
          . Recirculating coolant system.
          . Adjustable material length stop.
          . Clamping device for short ends.
          . Equalixing bar for jaws.
          . Nesting fixture for multiple sawing of stacked bars,
          small rounds
            and tubing.
          . Material support stands.
          . Saw blade ready for cutting.
          . Set of necessary tools and tool box
          . Grease gun.
          . Instruction and parts manual.
          INCLUDING:
          Hacksaw blade, power use, 6 tpi                            24                      12         24

 E.1.8    CIRCULAR CUT-OFF SAWING MACHINE
          Circular cut-off sawing machine 315 mm                      2                      1           2
          . Sawblade diameter 315 mm
          . Speed 40/80 rpm
          . Max. sawing capacity solid material 50 mm,
          . Max. sawing capacity round tube 90 mm
          . CE standard
          Complete with:
          . Machine stand, saw blade, coolant fluid
          INCLUDING:
          Material roller stand                                       2                      1           2
          · Trouble-free and efficient material transport for the
          feed and removal of workpieces
          · Universally applicable for e.g. metal belt saws,
          circular saws etc.
          · Roller support continuously height-adjustable and
          clampable
          · Safe workpiece rest with solid and highly stressable
          steel rolls
          · Stable construction made of special profiles
          · Option to assemble the length measuring systems
          LMS
          Technical data:
          - Diameter of support rollers: 60 mm
          - Width of support rollers: 360 mm
          - Maximum load: 360 kg
          - Length materials stand: 1000 mm
          - Height materials stand: 650 - 950 mm
          Circular saws                                               4                      2           4
          - Size : 315 x 2,5 x 40 mm Z6

          GAS WELDING
 E.1.9    OXY ACETYLENE WELDING
E.1.9.1   Combined welding & cutting outfit.                          3                      6           3
          MK 3 shank, mixer. Cutting attachment MK 3.
          Type 3 swaged welding nozzles 2, 5, 7, 10,13, 18 and
          25.
          3/64" ANM type cutting nozzle ( 5 - 12 mm.).
          1/16" ANM type cutting nozzle ( 10 - 75 mm.).
          Nozzle cleaner outfit.
          Outfit spanner.
          Data card.
          Plastic carrying case.
E.1.9.2   Acetylene regulator single stage, two gauges                3                      6           3
          These single stage regulators are precision built to
          latest BS EN ISO
          2503 standards to provide maximum accuracy and
          safety.
          Features: Forges brass body and chromed bonnet
          Internal safety valve
          Encapsulated valve on 300bar models
          63mm dual scale safety pressure
E.1.9.3   Flashback arrestor, acetylene                               3                      6           3
          for regulator mounting has been redesigned
          incorporating an improved sintered filter and thermal
          trip device. Complies with EN730




                                                                      4 of 46
                                                   LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                 Hag     Halfait El   Souk El
 Item     Description                                               Kerari                                      Kht 1
                                                                                Yousif    Muluk        Mahali
E.1.9.4  Oxygen regulator single stage, two gauges                    3                      6           3
         These single stage regulators are precision built to
         latest BS EN ISO
         2503 standards to provide maximum accuracy and
         safety.
         Features: Forges brass body and chromed bonnet
         Internal safety valve
         Encapsulated valve on 300bar models
         63mm dual scale safety pressure gauges
         Captive pressure adjusting screw
E.1.9.5 Flashback arrestor, oxygen                                    3                      6           3
         for regulator mounting has been redesigned
         incorporating an improved sintered filter and thermal
         trip device. Complies with EN730
E.1.9.6 Set of hoses                                                  3                      6           3
         . 10 mtr. oxygen hose i.d. 6 mm. complete mounted
         with nut,
           tailpiece and clamps to fit regulator side and hose
         check valves
           to fit welding-cutting torch side. Right handed.
         . 10 mtr. Acetylene hose i.d. 8 mm.complete mounted
         with connections as a.m. Left handed.
         . 10 Hose clamps for parallel routing of hoses.
E.1.9.7 Cylinder trolley for 40/50 ltr oxy/acetylene cylinders        3                      6           3
         Perfectly balanced trolleys of welded steel construction
         with solid rubber
         tyres and fitted safety retaining chains.
         Three models: Oxy-Acetylene Twin Trolley
         Oxy-Propane Twin Trolley
         Single Universal Trolley with height adjustment
E.1.9.8 Workbench for welding.                                        3                      6           3
         Frame made of painted steel sections.
         Dimensions 600x900 mm.
         Part of the work surface 400x600 mm is made of
         galvanized
         steel grate, another part of the work surface 300 x 600
         mm
         is made of refractory bricks, the rest part 600x200 mm
         is
         made of steel plate for collection filler materials and
         tools.
         Height above floor level 800 mm.
         Bin for collecting and cooling workpieces, made of
         galvanized steel sheet.
         Dimensions 300x600x65 mm.
         Plates and expansion bolts for securing the bench to
         the floor.
         Workpiece table for gas welding, 600x900 mm
E.1.9.9 Workpiece holder                                              3                      6           3
         Complete for connection to the a.m.Workbench
E.1.9.10 Spark lighter, with flint renewals in box, 10 pcs            3                      6           3
         SUNFIRE TYPE with cup to collect gases, ideal for site
         use, screw on flints.
E.1.9.11 Gas saver,                                                   3                      6           3
         gas economiser in production welding and brazing.
         The torch is held on the hooked
         arm when not in use which shuts off gas supply to the
         torch. When unhooked the
         torch can be immediately re-ignited from the pilot light
         without having to re-adjust
         the valves. 3/8” BSP connections.
E.1.9.12 Welding goggle flip-front                                   12                      12         12
         Flip-front gas welding goggle fitted with 50mm 5GW
         coloured and clear glass cover lens and anti-mist
         backing lenses BS1542 & BS 2029.2.

         SHIELDED METAL ARC WELDING
 E.1.10 MANUAL ARC WELDING, TRANSFORMER
E.1.10.1 AC welding transformer                                       2                      4           2
         . Supply voltage 230/400 V.
         . Frequency 50 Hz.
         . Phase 1.
         . No load Voltage 52 V. / 79 V.
         . Current range 40-400 A. / 40-330 A.
         . Absorbed power 60% 23 KVA.
         . Duty cycle 35% 400 A. / 330 A.
         . Duty cycle 60% 310 A. / 250 A.
         . Electrode 1,6 - 6 mm.
         . Insulation class H.
         . Protection Degree IP 21.




                                                                      5 of 46
                                                    LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                Hag     Halfait El   Souk El
 Item     Description                                              Kerari                                      Kht 1
                                                                               Yousif    Muluk        Mahali
E.1.10.2 Set of accessories                                          2                      4           2
         4 mtr. primary cable.
         5 mtr. welding cable 50 q mm. with quick connector
         and electrodeholder 500 A.
         5 mtr. ground cable 50 q mm. with quick connector and
         earthclamp 500 A.
         Welding mask with clear glass and coloured glass.
         Chipping hammer peen and point.
         Wire brush.
         Pair of gloves, chrome leather, 5 fingers,15 cm. cuff.
         Welding Apron, chrome leather 900 x 700 mm
E.1.10.3 Workbench for welding.                                      2                      4           2
         Frame made of painted steel sections.
         Dimensions 600x900 mm.
         Part of the work surface 400x600 mm is made of
         galvanized
         steel grate, another part of the work surface 300 x 600
         mm
         is made of refractory bricks, the rest part 600x200 mm
         is
         made of steel plate for collection filler materials and
         tools.
         Height above floor level 800 mm.
         Bin for collecting and cooling workpieces, made of
         galvanized steel sheet.
         Dimensions 300x600x65 mm.
         Plates and expansion bolts for securing the bench to
         the floor.
         Workpiece table for gas welding, 600x900 mm
E.1.10.4 Workpiece holder                                            2                      4           2
         Complete for connection to the a.m.Workbench
E.1.10.5 Portable welding screen                                     2                      4           2
         Height 2100 mm. Length 2100 mm.
         With 4 swivel wheels ( two with brake)
         and Orange Curtain.

E.1.10.6 Welding helmet                                             12                      36         12
         Glassholder 50 x 108 mm.Sliding window
         with welding glass and clear glass.
         Adjustable headgear. Complete with clear glass
         in helmet and welding glass in flip-front window.

E.1.10.7 Spare welding glass cover                                  12                      24         12
         - shade 10
         - Size: 50 x 108 mm
         - 12 pcs/box
E.1.10.8 Spare clear glass cover                                    12                      24         12
         - Size: 50x108 mm
         - 12 pcs/box
E.1.10.9 American style helmet with 4-1/4"x 2-1/4" shade 10         12                      36         12
         lens.
         BSEN175, BSEN169, - Deluxe mask, supplied with a
         shade 9 lens, safety lens and an anti-spatter lens.
         Accepts standard 4-1/4” x 3-1/4” lenses.

 E.1.11 MANUAL ARC WELDING, TRANSFORMER/RECTIFIER
E.1.11.1 Welding transformer / rectifier                             2                      4           2
         Mobile on solid rubber wheels. Air cooled.
         Power factor capacitors built-in.
         Positive overload protection.
         Process selector AC/DC.
         Polarity selector.
         Current range selector by rheostat.
         Primary Voltage: 400 V. 1 Ph. 50/60 Hz.
         Output ratings: A.C / D.C.
         Open circuit voltage: 80 / 75
         Output Amperes: 375 / 350
         Max. rated output Voltages: 28 / 20
         Rated duty cycle at
         100%: 250 A
         60%: 300 A
         35%: 375 A at 35%.




                                                                     6 of 46
                                                   LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                Hag     Halfait El   Souk El
 Item     Description                                              Kerari                                      Kht 1
                                                                               Yousif    Muluk        Mahali
E.1.11.2 Set of accessories                                          2                      4           2
         4 mtr. primary cable.
         5 mtr. welding cable 50 qmm. with quick connector and
         electrodeholder 500 A.
         5 mtr. ground cable 50 qmm. with quick connector and
         earthclamp 500 A.
         Welding mask with clear glass and coloured glass.
         Chipping hammer peen and point.
         Wire brush.
         Pair of gloves, chrome leather, 5 fingers,15 cm. cuff.
         Welding Apron, chrome leather 900 x 700 mm
E.1.11.3 Workbench for welding.                                      2                      4           2
         Frame made of painted steel sections.
         Dimensions 600x900 mm.
         Part of the work surface 400x600 mm is made of
         galvanized
         steel grate, another part of the work surface 300 x 600
         mm
         is made of refractory bricks, the rest part 600x200 mm
         is
         made of steel plate for collection filler materials and
         tools.
         Height above floor level 800 mm.
         Bin for collecting and cooling workpieces, made of
         galvanized steel sheet.
         Dimensions 300x600x65 mm.
         Plates and expansion bolts for securing the bench to
         the floor.
         Workpiece table for gas welding, 600x900 mm
E.1.11.4 Workpiece holder                                            2                      4           2
         Complete for connection to the a.m.Workbench

         Gas Metal Arc Welding (MIG)
 E.1.12 SHIELDED SEMI-AUTOMTIC ARC WELDING
E.1.12.1 UNI MIG 398 N + separate wire feeder T4.                                           4
         For MIG - MAG Welding.
         Heavy duty / high speed
         230/400 V. 3 Ph. 50 Hz.
         4 mtr. primary cable.
         With four wheels (2 swivel type).
         Rated input 60% duty cycle:13 KVA.
         Open circuit voltage 18 - 47 V.
         Current range 30 - 400 A.
         Rated duty cycle 40% 400 A.
         Rated duty cycle 100% 236 A.
         Adjustable positions 24 steps.
         Welding wire steel 0,6 - 1,6 mm.
         Welding wire stainless steel 0,6 - 1,2 mm.
         Welding wire aluminium 0,8 - 1,6 mm.
         Insulation class H.
         Protection degree IP 22.
         Dim. 1000 x 555 x 1340 mm.
         Weight 165 kg.
         Standard Attachments - Accessories
         Wire feeder T4 .
         5 mtr. interconnection cable.
         2 position smoothing choke.
         Timer for spotwelding.
         Welding torch with 4 mtr. hose, air cooled.
         Earthcable 35 mm2 length 5 mtr. with earthclamp.
         Pressure regulator with flowmeter
         2 mtr. Gas hose.
         Accessories box.
         Welding Face shield.
         Leather apron.
         Welding gloves.
E.1.12.2 Standard toolset.
         Mixgas cylinder                                                                    4
         Empty seamless steel cylinder brandnew for
         Mixgas, watercapacity 50 ltr. with
         concave bottom and protection cap.
         Valve with BS connection.
         Working pressure 200 bar.
         Test pressure 300 bar.

E.1.12.3 Portable welding screen                                                            4
         Height 2100 mm. Length 2100 mm.
         With 4 swivel wheels ( two with brake)
         and Orange Curtain.


 E.1.13   TIG WELDING




                                                                     7 of 46
                                                   LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                Hag     Halfait El   Souk El
 Item     Description                                              Kerari                                      Kht 1
                                                                               Yousif    Muluk        Mahali
E.1.13.1 TIG WELDING MACHINE                                                                4
         - 160amp welding power
         - AC/DC
         - Copper wound transformer - Providing 96 amps @
         60% duty cycle with amazing smoothness.
         - Single phase supply - Operates where 3ph power is
         unavailable.
         - Continuous electronic control - from 6 to160 amp with
         high and low current ranges.
         - Slope down facility

          time - From 26 milliseconds to 2.3 seconds.
          - Post weld gas control - From 3 to 30 seconds.
          - Adjustable hot start
          - Anti stick circuit
          - Capacitor bank


E.1.13.2 Welding face shield 551                                                            4




         Spot Welding
 E.1.14 SPOT WELDING MACHINE
E.1.14.1 Foot operated rocker arm pedestal spot welder 10                                   2
         KVA.
         Features :
         . Upper arm adjustable in length for 200 mm. range.
         . Electrode holder Ø 19 mm. designed for straight or
           angled fitting.
         . Adjustable electrode stroke.
         . Adjustable electrode pressure.
         . Foot control adjustable in length.
         . Air cooled transformer coated in epoxy resin.
         . Synchronous welding time from 2 to 100 cycles.
         . Current adjustment with phase control.
         . Built-in cos. phi adjustment.
         . Timer - compensation selector.
         . Specifications.
         . Supply voltage : 400 V/1Ph/50-60 Hz.
         . Capacity 50% : 10 KVA.
         . Capacity 10% : 18 KVA.
         . Welding cap. Sheet : 2,5+2,5 mm.
         . Welding cap. Diam. 7+7 mm.
         . Length of upper arm adjustable 165-405 mm.
         . Fuse rating : 230V- 50A./400V-35 A.
         . Dimensions 720 x 430 x 1150 mm.
         . Weight : 109 kg.
         Supplied with servicing tool kit and service
         maintenance manual in English.
         1 pair of electrodes straight.
         1 Pair of electrodes off-set.
         1 Pair of electrodes bent.
 E.1.15 PORTABLE SPOT WELDING GUN




                                                                     8 of 46
                                                      LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                    Hag     Halfait El   Souk El
  Item    Description                                                  Kerari                                      Kht 1
                                                                                   Yousif    Muluk        Mahali
E.1.15.1 Portable spot welding gun                                       1                      2           1
         . Light and proved spot gun for car body repair.
         . Built-in electronic timer from 0,05" to 1,25".
         . Compensation circuit operating the timer only when
         there is a
           proper passage of current.
         . Threaded base for fixing on a bench.
         . Additional lower arm coupling to provide large
         opening
           between arms.
         . F Class insulation, non-brittle materials, tested on
         4000 volt a.c.
         Technical data:
         . Output at 50% kVA 2.
         . Continuous input kVA 1,41.
         . Max short circuit input kVA 16.
         . Max welding input kVA 12,5.
         . Input voltage 50 Hz. Volts 230 / 240.
         . Fuse (Delayed action) Amps 16.
         . Secondary.
         . No-load voltage 1,65.
         . Short circuit current - Amps 7400.
         . Max weld current - Amps 5750.
         . Cap. sheet 2 + 2 mm.
         . Cap. wire Ø6 + Ø6 mm.
         . Welding arms.
         . Standard length of arms mm. 125 mm.
         . Arms gap mm. 96.
         . Electrode arm dia. mm. 20.
         . Tip dia. mm. 10.
         . Max. electrode stroke mm. 65 - 200.
         . Electrode force, min. arm length DaN 120.
 E.1.16 . Electrode force, max. arm length DaN 40.
         PLASMA CUTTING MACHINE, 12 MM
E.1.16.1 Plasma cutting machine                                                                 2
         Plasma cutting machine manufactured following the
         inverter technology. Single-phase, portable, fan
         cooled, microprocessor controlled. Designed for
         cutting all conductive materials like iron (low carbon
         steel-mild steel), steel, steel alloys, stainless steel,
         copper, bronze, aluminium, aluminium alloys etc. Pilot
         arc allows easier starting and greater cutting flexibility.
         Built in air compressor ensures that the unit is self
         contained. SIP Industrial Weldmate Plasma Inverters
         come with 6 months „Special Care‟ warranty for that
         extra peace of mind.


          GENERAL EQUIPMENT
 E.1.17 GENERAL EQUIPMENT
E.1.17.1 Electrode cabinet                                                                      2
          industrial oven with an isolated double-walled
          construction
          Specifications:
          . Temperature 50 - 300 degr.C.
          . Capacity 54 - 72 parcels.
          . Elec. supply and load 230/400 V. 50/ 60 cs. 3300
          Watt.
          . Internal measurements 700 x 450 x 1060 mm.
          . External measurements 820 x 600 x 1300 mm.
          . Nett. weight 152 kg.
E.1.17.2 ARC WELDING BOOTHS, INCLUDING                                   3                      6           3
          EXTRACTION, FILTER AND DUCT SYSTEM
E.1.17.3 MIG WELDING BOOTHS, INCLUDING EXTRACTION,                                              4
          FILTER AND DUCT SYSTEM
E.1.17.4 TIG WELDING BOOTHS, INCLUDING EXTRACTION,                                              4
          FILTER AND DUCT SYSTEM
E.1.17.5 OXY & ACETYLENE EXTRACTION SYSTEM                               3                      6           3
E.1.17.6 SPOT WELDING EXTRACTION SYSTEM                                                         2
E.1.17.7 MOBILE EXTRACTION SYSTEM                                        1                      2           1
E.1.17.8 WELDING POSITIONERS, PLATE WELDING                              3                      6           3
E.1.17.9 GRINDING TABLES, 1000 X 1000 MM                                 1                      2           1
E.1.17.10 WELDING TABLE, 2000 X 800 MM                                   1                      2           1
E.1.17.11 PLASMA CUTTING TABLE, 1000 X 800 MM                                                   2

 E.1.18   BASIC SOLDERING




                                                                         9 of 46
                                                    LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                Hag     Halfait El   Souk El
  Item    Description                                             Kerari                                       Kht 1
                                                                               Yousif    Muluk        Mahali
E.1.18.1 Soldering iron set, consist of:                            3                       6           3
         . Propane cylinder, cap. 1 ltr.
         . Pressure regulator
         . Handle with valve control
         . Soldering copper 450 gr.
         . Burning nozzle
         . Windshield
         . 3 mtr. propane hose
         . 2 Jubilee clips
E.1.18.2 Propane Cylinder                                           3                       6           3
         . Capacity 1 ltr.
E.1.18.3 Blowtorch                                                  3                       6           3
E.1.18.4 Anvil 100 KG                                               1                       2           1
         south german style with upsetting block
E.1.18.5 Anvil stand                                                1                       2           1

 E.1.19 WELDING OCCUPATION, GENERAL TOOLS
E.1.19.1 Wire brush, 4 rows of 16                                  100                     200         100
         Wooden stocked brush with steel fill. Suitable for
         general purpose applications.
         Length Fill/Overall: 130/260mm
         Fill Pattern: 4 Rows of 16

E.1.19.2 Angle grinder, 125 mm                                      3                       6           3
         . Disc diameter 125 mm
         . Rated input power 650 W
         . No-load speed 11000/min
         . Spindle thread M14
         . Weight 1,4 kg
         . Standard accessories:
         . Spanner
         . Side handle
E.1.19.3 Set cutting / grinding discs, 10 pcs                       2                       4           2
E.1.19.4 Angle grinder, 230 mm                                      3                       6           3
         . Disc diameter 125 mm
         . Rated input power 650 W
         . No-load speed 11000/min
         . Spindle thread M14
         . Weight 1,4 kg
         . Standard accessories:
         . Spanner
         . Side handle
E.1.19.5 Bench vice, 150 mm. Fixed base                             6                       12          6
         Bench mounting, steel vice with anvil suitable for
         workshop, garage and machine-shop use. Fixed base
         directly mounts onto work bench and a swivel vice
         plate adaptor is available as an optional extra.
         Guaranteed for 5 years against breakage.
         Jaw Size: 150mm
         Jaw Opening: 180mm

E.1.19.6 Welder‟s chipping hammer, 450 gr                          12                       24         12
E.1.19.7 Ball pein hammer, 450 g                                   12                       24         12
         Well balanced hammer with a drop-forged steel head
         and fitted with a high quality hickory shaft.
         Manufactured and tested to BS876.
         Weight: 450 g
E.1.19.8 Plain slot screwdriver, 6x150 mm                           6                       12          6
         Expert Quality, chrome vanadium steel blades
         hardened, tempered with satin chrome plated finish
         and shot blasted tips. The handle is manufactured from
         impact-resistant heavy duty „soft gripÕ polypropylene
         with colour coded handles for easy recognition. Most
         blades have hexagon bolsters which enable extra
         power to be obtained by use of a spanner.

E.1.19.9 Engineers screwdriver, 9.5x250 mm                          6                       12          6
         Expert Quality, chrome vanadium steel blades
         hardened, tempered with satin chrome plated finish
         and shot blasted tips. The handle is manufactured from
         impact-resistant heavy duty „soft gripÕ polypropylene
         with colour coded handles for easy recognition. Most
         blades have hexagon bolsters which enable extra
         power to be obtained by use of a spanner.

E.1.19.10 Screwdriver, Philips no.2                                 6                       12          6
E.1.19.11 Screwdriver, Philips no.3                                 6                       12          6




                                                                    10 of 46
                                                        LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                      Hag     Halfait El   Souk El
  Item     Description                                                  Kerari                                       Kht 1
                                                                                     Yousif    Muluk        Mahali
E.1.19.12 Combination pliers, 180 mm                                      6                       12          6
          drop forged from chrome vanadium steel, hardened
          and tempered with additionally induction hardened
          cutting edges. lacquered finish for corrosion protection
          with heavy duty, soft grip handles with slip guards.

E.1.19.13 Diagonal cutting pliers, 160 mm                                 6                       12          6
          for delicate and accurate work in a continuous
          production environment. Manufactured from special
          tools steel, oil hardened and tempered. With full flush
          cutting jaws. Cushion-grip spring-loaded handles.

E.1.19.14 Snipe nose pliers, 160 mm                                       6                       12          6
          for delicate and accurate work in a continuous
          production environment. Manufactured from special
          tools steel, oil hardened and tempered. With flat-round
          jaws and cushion-grip spring-loaded handles.
E.1.19.15 Water pump pliers, 250 mm                                       6                       12          6
          manufactured from chrome vanadium electric steel, oil
          hardened, tempered and chrome plated, with smoothly
          ground jaws, joint faces and an accurately formed box
          joint with safety stop. The parallelogram-shaped
          gripping surfaces have specially hardened teeth to
          61HRC for positive grip on pipes and nuts. One hand
          press button adjustment.Heavy duty moulded handles
          with slip guards for extra safety. Has 'no-nip' feature
          which prevents handles locking together and
          damaging users' hands.
E.1.19.16 Gas pliers                                                      6                       12          6
          Made from Titacrom Steel. PVC insulated handles
          Length: 200 mm
          Capacity: 31 mm
E.1.19.17 Precision steel square, 150 mm                                  6                       12          6
          Quality made solid steel construction. Hardened,
          tempered and precision polished. Manufactured to
          meet squareness tolerance contained in BS939(B).
          Blade edges and stock face to within ±0.016mm
          tolerance.
          Size: 150 mm
E.1.19.18 Filecard cleaning brush                                         6                       12          6
          For the cleaning of files, etc. Filled with file card steel
          wire 360 points per square inch. Brush width 25mm.
          Filled Length: 90mm. Beechwood handle.
E.1.19.19 Triangular scraper, 80 mm                                       6                       12          6
E.1.19.20 Adjustable spanner, 15 mm                                       6                       12          6
          Chrome Vanadium steel adjustable wrench. Hardened
          and heat treated with satin chrome finish. Fully
          polished, offset jaws. Slim raised lip style handle with
          hanging hole.
          Size: 200mm
          Capacity: 25mm

E.1.19.21 Adjustable wrench set, 3 pcs, 20 mm, 25 mm, 34 mm               6                       12          6
          Hardened and heat treated steel with satin chrome
          finish. Fully polished, offset jaws. Slim raised lip style
          handle with hanging hole.
          Length: 150, 200, 250 mm
          Capacity: 20, 25, 34 mm

E.1.19.22 Adjustable spanner, 55 mm                                       6                       12          6
          Chrome Vanadium steel adjustable wrench. Hardened
          and heat treated with satin chrome finish. Fully
          polished, offset jaws. Slim raised lip style handle with
          hanging hole.
          Size: 450mm(18”)
          Capacity: 55mm

E.1.19.23 Open-ended spanner set, 8 pcs                                   6                       12          6
          Expert Quality, forged from chrome vanadium steel
          hardened, tempered, chrome plated and fully polished.
          Open ends set at 15°. Supplied on wall mountable
          plastic rack. Display packed.
          Contents: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x
          17,
          18 x 19 and 20 x 22mm




                                                                          11 of 46
                                                      LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                    Hag     Halfait El   Souk El
  Item     Description                                                Kerari                                       Kht 1
                                                                                   Yousif    Muluk        Mahali
E.1.19.24 Punch and chisel set, 12 pcs                                  6                       12          6
          Hardened, tempered and fully polished Chrome
          Vanadium steel punches and chisels. Supplied in tool
          roll.
          Contents: Centre Punches; #1 x 8 x 100, #2 x 9.5 x
          120mm, Taper Pin Punches; Ø3 x 9.5 x 120, Ø4 x 9.5 x
          120, Ø5 x 9.5 x 120mm, Parallel Pin Punches; Ø2 x 8 x
          115, Ø4 x 9.5 x 150, Ø6 x 12.7 x 180mm, Cold Chisels;
          5 x 9.5 x 130, 7 x 12.7 x 165mm, Utility Chisel x 2, Tool
          Roll

E.1.19.25 Double ended scriber, 200 mm                                  6                       12          6
          Precision manufactured tool with hardened steel tips.
          Features straight and 90° tips with knurled body.
          Length: 200 mm

E.1.19.26 Hand vice, 100 mm                                             6                       12          6
          Hand held vice for the secure clamping of component
          parts prior to grinding, drilling, etc.
          Capacity: 19 mm
          Width: 36 mm
E.1.19.27 Pin punch set, 17 pcs                                         6                       12          6
          Hardened, tempered and fully polished Chrome
          Vanadium steel punches. Supplied with stand.
          Contents: Long Pin Punches; 3 x 9.5 x 200, 4 x 9.5 x
          200, 5 x 9.5 x 200, 6 x 9.5 x 200, 8 x 12.7 x 200, 10 x
          12.7 x 200mm, Pin Punches; 2 x 8 x 115, 3 x 8 x 125, 4
          x 9.5 x 150, 5 x 9.5 x 165, 6 x 12.7 x 180, 8 x 12.7 x
          180mm, Taper Punches; 2 x 9.5 x 120, 3 x 9.5 x 120, 4
          x 9.5 x 120, 5 x 9.5 x 120, 6 x 9.5 x 120mm, Stand


E.1.19.28 Twist drill set, 1 to 13 mm                                   6                       12          6
          · 25 pcs; 1 - 13 mm
          · Metal box
E.1.19.29 C-cramp, 100 mm                                              12                       24         12
          Malleable cast iron frame with chrome plated square
          thread screw, tommy bar handle and swivel shoe.
          Capacity : 100 mm
          Throat: 60 mm
E.1.19.30 C-cramp mall/cast iron, 200 mm                               12                       24         12
          Hand held vice for the secure clamping of component
          parts prior to grinding, drilling, etc.
          Capacity: 200 mm
          Width: 85 mm
E.1.19.31 Rubber mallets, 2.5 lb                                        6                       12          6
          General purpose mallet. Gives a gentle but firm blow
          with little rebound.
E.1.19.32 Allen key set, 1.5 to 10 mm, 10 pcs                           6                       12          6
          Manufactured from chrome vanadium steel hardened
          and tempered, each held on key ring type holder.
          Display packed.
          Contents: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, 8.0 and
          10.0mm.
E.1.19.33 Welding gauge, graduated in mm.                               6                       12          6
          for measurement of plane welding joint heights, from
          steel, graduated in mm.
          Equipped with 1/10 mm. vernier, points angled at 60º -
          70º - 80º - 90º.

E.1.19.34 Welding gauge with 12 blades, 3-12 mm.                        6                       12          6
          for measurement of
          plane welding joint heights, from steel,graduated in
          mm.




E.1.19.35 Steel folding rule, 600 mm/24"                               12                       24         12
          Double sided, single fold rule with permanently etched
          graduations of cm/mm and inches, 1/8", 1/16", 1/32"
          and 1/64".
          Length: 609 mm
          Width: 18 mm
E.1.19.36 Divider, spring type, 150 mm                                 12                       24         12
          • Steel, with hardened points
          • Square legs , chromed pattern
          • With quick adjusting spring nut and fine adjustment




                                                                        12 of 46
                                                       LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                   Hag     Halfait El   Souk El
  Item      Description                                              Kerari                                       Kht 1
                                                                                  Yousif    Muluk        Mahali
E.1.19.37 Vernier caliper, with fixing screw, 0-150 mm                12                       24         12
          Suitable for craftsmen and educational est.
          • Stainless steel, hardened
          • Scale and vernier satin chrome finish
          • Jaws fine ground
          • Mono-block vernier
          • 4-way measuring system
          • Flat depth gauge
E.1.19.38 Flange square 500x500 mm                                     6                       12          6
          For fitters and pipeline constructions
          To adjust the flange
          • Steel, chromed pattern
E.1.19.39 External micrometer, 0-25 mm                                 6                       12          6
          For standard expectations
          • Drum and sleeve satin chrome finish
          • Chromed frame
          • Tungsten carbide measuring faces
          • Insulation plates
          • Locking lever for quick and precise fixing
          • With ratchet for constant measuring pressure
          • Delivery with setting key, from up 25 mm with setting
          gauge
E.1.19.40 Bench vice, 250 mm. Fixed base                              12                       24         12
          Bench mounting, steel vice with anvil suitable for
          workshop, garage and machine-shop use. Fixed base
          directly mounts onto work bench. Guaranteed for 5
          years against breakage.
          Jaw Size: 250mm
          Jaw Opening: 250mm

E.1.19.41   Electrical hand drilling machine, 13 mm                    2                       4           2
E.1.19.42   battery operated drilling machine                          2                       4           2
E.1.19.43   Straight grinding machine                                  2                       4           2
E.1.19.44   Platform truck                                             1                       2           1
            Rigid platform truck features rubberised deck and
            bumper strip. Handles fold flat for ease of storage.
            Suitable for a variety of warehouse, office and
            domestic applications.
            Capacity: 300kg
            Wheel: Ø125mm
            Deck Length: 916mm
            Deck Width: 616mm
            Deck Height: 209mm
            Overall Height: 863mm

E.1.19.45 Material Rack                                                1                       2           1
          - Integral floor fixing brackets
          - Beam slots every 7,5 cm. Adjustable to suit all needs
          - Shelf capacity max. 600 kg
          - Maximum capacity per frame: 4000 kg
          - Quick assembly. Easy to construct
          - Dimensions 400 x 60 cm

E.1.19.46 Ladder, 3-way aluminium ladder, capacity 150 kg              1                       1           1
          BS 2037:1994 Class 1 three-way multi-use aluminium
          ladder with 130kg Duty Rating. Maximum capacity
          175kg. Compact size for easy handling and storage.
          Supplied with work tray with provision for paint tin,
          brushes, screwdrivers, etc. Can be used as an offset
          step ladder on stairs or platforms, standard step ladder
          or two-section extension ladder.
          Configuration offset step ladder
          Maximum reach height: 2340mm
          Step height: 1240 mm
          Configuration Step ladder
          Maximum reach height: 2390 mm
          Step height: 1290 mm
          Configuration 2 section extension
          Maximum reach height: 3190 mm
          Step height: 2090 mm




                                                                       13 of 46
                                                  LOT E.1./E.2. WELDING AND SHEET METAL




                                                                               Hag     Halfait El   Souk El
  Item    Description                                            Kerari                                       Kht 1
                                                                              Yousif    Muluk        Mahali
E.1.19.47 Cable extension reel, 50 m, 3x1,5 mm2                    2                       4           2
          Durable composite drum on steel stand with three
          230V power sockets and thermal overload protection.
          Fitted with ASTA/BS approved 3-pin plug. Fitted with
          cable guide to prevent cable tangling.
          Voltage: 230V
          Cable Length: 50mtr
          Cable Section: 3 x 1.5mm²
          Cable Type: PVC
          Sockets: 3
          Thermal Trip: Yes
          Drum Size: Large
          Drum Type: Composite
          Capacity Wound: 1000W
          Capacity Unwound: 3500W


E.1.19.48 Unitest digital clamp meter                              2                       4           2
          Technical Data
          Display 31/2 digit, LCD, 3200 Digits
          Measurement ranges / Resolution:
          Closed current converter
          AC current 32.00; 320.0 A / 0.01 A; 0.1 A
          Tolerance ± (1.2 % rdg. + 5 Digits)
          Open current converter
          AC current 320.0 A / 0.1 A
          Tolerance ± (10 % rdg. + 5 Digit)
          Frequency range 50…60 Hz
          Measurement Category CAT II / 600 V, CAT III / 300 V
          Pollution Degree 2
          Safety in compl. with IEC 61010, EN 61010,
          DIN VDE 0411
          Type of protection IP 40
          Clamp opening closed current converter:
          ø 33 mm
          open current converter:
          ø 20 mm
          Power supply 2 x 1.5 V IEC LR44
          Dimensions 180 x 54 x 25mm
          Weight approx. 130 g

          Welder's chipping hammer 450 grams                       3                       6           3
          Storage Cabinet 200 x 100 cm including 12 shelves        1                       2           1
          with top cover; 30 cm with 72 plastic dividers

         FURNITURE
 E.1.20 WORKBENCH
E.1.20.1 Workbench                                                 6                       12          6
         - Size: 2150x950x865 mm
         - 40 mm thick plywood worktop
         - sheet steel top
         - 1 drawer


         Consumables
 E.1.22 CONSUMABLES, BASIC REQ., MANUAL ARC WELDING
E.1.22.1 Cellulosic coated electrodes, for piping en vertical  2                           4           2
         down welding. Acc. To AWS A 5.1 E 6010
         . Dia. 2,50 mm, length 350 mm, weight each packet 4,8
         kg,
           content 295 pcs
         . Dia. 3,25 mm, length 350 mm, weight each packet 4,9
         kg,
           content 185 pcs
E.1.22.2 Rutile coated electrode, suitable for all posistion   2                           4           2
         welding, acc. to AWS A.5.1 E 6013
         . Dia. 2,50 mm, length 350 mm, weight each packet 4,6
         kg,
           content 230 pcs
         . Dia. 3,25 mm, length 350 mm, weight each packet 4,5
         kg,
           content 140 pcs
E.1.22.3 Rutile coated electrode, suitable for all posistion   2                           4           2
         welding, acc. to AWS A.5.1 E 6013
         . Dia. 2,50 mm, length 300 mm, weight each packet 3,9
         kg,
           content 215 pcs
         . Dia. 3,25 mm, length 350 mm, weight each packet 4,3
         kg,
           content 125 pcs




                                                                   14 of 46
                                                   LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                  Hag     Halfait El   Souk El
 Item     Description                                               Kerari                                       Kht 1
                                                                                 Yousif    Muluk        Mahali
E.1.22.4 Basic coated electrodes, extremly low moisture               2                       4           2
         absorption, acc. to AWS A 5.1 E 7018 1 H4R
         . Dia. 2,50 mm, length 350 mm, weight each packet 3,8
         kg,
           content 180 pcs
         . Dia. 3,25 mm, length 350 mm, weight each packet 4,3
         kg,
           content 120 pcs
         . Dia. 4,00 mm, length 450 mm, weight each packet 5,6
         kg,
           content 80 pcs
E.1.22.5 . DC carbons 3/16"x12"(5x305 mm)                             2                       4           2
           content 100 pcs D.C. carbons
E.1.22.6 . DC carbons 5/16"x12"(8x305 mm)                             2                       4           2
           content 50 pcs D.C. carbons

 E.1.23   CONSUMABLES, BASIC REQ. MIG / MAG WELDING

E.1.23.1 Welding Wire FRO FILCORD C. Acc. To DIN SG 2                 1                       2           1
         Nett. weight 15 kg./ reel. 4 reels with diam. 0,6 mm
E.1.23.2 Welding Wire FRO FILCORD C. Acc. To DIN SG 2                 1                       2           1
         Nett. weight 15 kg./ reel. 4 reels with diam. 0,8 mm
E.1.23.3 Welding Wire FRO FILCORD C. Acc. To DIN SG 2                 1                       2           1
         Nett. weight 15 kg./ reel. 4 reels with diam. 1,0 mm
E.1.23.4 Welding Wire FRO FILCORD C. Acc. To DIN SG 2                 1                       2           1
         Nett. weight 15 kg./ reel. 4 reels with diam. 1,2 mm.
 E.1.24 CONSUMABLES, BASIC REQ. WELDING
         OCCUPATION
E.1.24.1 Grinding wheel, 200x25x20 mm, grit 36                       10                       20         10
E.1.24.2 Grinding wheel, 200x25x20 mm, grit 80                       10                       20         10
E.1.24.3 Grinding wheel, 300x40x25 mm, grit 36                       10                       20         10
E.1.24.4 Grinding wheel, 300x40x25 mm, grit 60                       10                       20         10
E.1.24.5 Grinding wheel dresser, 150 mm                              10                       20         10
         Aluminium alloy body with four star wheels. Suitable
         for cleaning, sharpening and trueing grinding wheel
         surfaces. Suitable for use with any grinder.
         Length: 150 mm
E.1.24.6 Hacksaw blade, 300 mm, 18 tpi                               100                     200         100
         Expert Quality saw edge, manufactured from high
         speed steel strip, electron beam welded to high quality
         carbon steel backing. Packed 50 blades to plastic box.

E.1.24.7 Hacksaw blade, 300 mm, 24 tpi                               100                     200         100
         Expert Quality saw edge, manufactured from high
         speed steel strip, electron beam welded to high quality
         carbon steel backing. Packed 50 blades to plastic box.


 E.1.25   CONSUMABLES, BASIC REQ. OXY-GAS WELDING

E.1.25.1 Mild steel rod copper coated FER G1,                         2                       4           2
         . Dia. 2,0 mm, length 1000 mm, weight each packet 5
         kg
         . Dia. 3,0 mm, length 1000 mm, weight each packet 5
         kg
         . Dia. 4,0 mm, length 1000 mm, weight each packet 5
         kg
E.1.25.2 Bronze rod Bronze C L -CuZn 40,                              2                       4           2
         Dia. 3mm, length 1000 mm, package of 5 kg
E.1.25.3 Bronze flux fro deoxid, tins of 500 cm3                      2                       4           2
 E.1.26 CONSUMABLES, BASIC REQ, TIG WELDING
E.1.26.1 "Tungsten electrode Assortment:                                                     200
         Thorium alloyed for D.C. welding dia. 1.0, 1.6, 2.4 mm."


E.1.26.2 "Filler Metal Assortment:                                                            32
         For Aluminum (AL 99.6).
         dia 2.0 mm and 3.0 mm, each 30 Kg"

E.1.26.3 "Filler Metal Assortment:                                                            32
         For stainless steel, dia 1.6 mm and 2.0 mm, each 30
         Kg."

E.1.26.4 "Gas Cup Assortment:                                                                 32
         For continuous welding, ceramic, dia 4, and 12.8 mm."


E.1.26.5 "Collet Assortment:                                                                  32
         For electrode dia 1.0, 1.6 and 2.4 mm."




                                                                      15 of 46
                                                    LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                Hag     Halfait El   Souk El
 Item     Description                                             Kerari                                       Kht 1
                                                                               Yousif    Muluk        Mahali
E.1.26.6 Collet Boder Assortment: For electrode dia 1.0, 1.6                                32
         and 2.4 mm.

E.1.27    CONSUMABLES, BASIC REQ., PLASMA WELDING

E.1.27.1 Replacement heads                                                                  20
         • Head Angle: 90°
         • Includes Safety Sleeve
E.1.27.2 Shiels cups                                                                        20
E.1.27.3 Electrodes                                                                         20
 E.1.28 CONSUMABLES, BASIC REQ. SPOT WELDING
E.1.28.1 Electrodes, 120 mm                                                                 20
         These arms have a 20mm diameter and allow spot
         welding to be carried out on the external edge of lips
         sils etc... They are supplied as a pair complete with
         long top and short curved bottom electrodes. These
         electrodes have a diameter of 12mm.

E.1.28.2 Spot arms                                                                          10
         These arms have a 20mm diameter and are provided
         as a pair complete with a pair of equal length top and
         bottom electrodes. These electrodes have a 12mm
         diameter.

E.1.28.3 Spot welding arms 350 mm                                                           10
         These arms hold the electrode at a 455 angle and
         have a 20mm diameter. Supplied as a pair with short
         equal length electrodes with a 12mm diameter.
E.1.28.4 Spot welding arms, 500 mm                                                          10
         These arms have a 20mm diameter. Used when only
         the longest reach is necessary. Sold as a pair
         complete with 12mm electrodes - long top and short
         bottom as show




  E.2     SHEET METAL SUB-SECTOR
          Sheet Metal Machines
 E.2.1    SHEET METAL BENDING ROLLERS
          Sheet metal bending rollers                                                       1
          . Capacity 1275x3,0 mm
          . Rolls 90/80 mm dia.
          . Weight 330 kg
          . Hand operated
          . Symmetric rolls
          . Adjustable upper roll
          . Complete with stand
 E.2.1a   ELECTRIC OPERATED, SHEET METAL BENDING ROLLERS
          Bending roller                                                                    1
          Motorised machines with asymmetrically placed rolls
          which enables pre-bending of the workpiece. A new
          and modern
          design, easy to operate and with all rolls crowned to
          ensure uniform bendings. From 0,6 m till 2,5 m length
          and up till 7 mm
          sheet thickness.
          - Capacity 1290 x 6,0 mm
          - Rolls 120 mm
          - Weight 825 kg
          - Electric operated
          - Symmetric rolls
          - Adjustable upper roll
          - Complete with stand
 E.2.2    FOLDING, BENDING, BOX-FORMING MACHINE
          Folding, bending, box-forming machine                                             1
          . Hand operated
          . Capacity 1020x2,5 mm
          . Max opening 48 mm
          . Bending angle 135 deg.
          . Weight 270 kg
 E.2.3    FOLDING AND BENDING MACHINE
          Folding and bending machine                                                       1
          . Hand operated
          . Capacity 2020x2,0 mm
          . Max opening 120 mm
          . Bending angle 135 deg.
          . Weight 1020 kg
 E.2.3a   ELECTRIC OPERATED, FOLDING AND BENDING MACHINE




                                                                    16 of 46
                                                       LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                      Hag     Halfait El   Souk El
 Item     Description                                                   Kerari                                       Kht 1
                                                                                     Yousif    Muluk        Mahali
          Folding and Bending machine                                                             1
          Motorised folding machine, compact and fully-welded
          machines, modern design. A well dimensioned
          chain drive transmits the power. All bearings are
          sealed for life and guideways are maintenance free.
          Machines includes : PLC-control, foot switch,
          emergency switch, manual stepless angle control.
          Supply with a programmable motorised back gauge
          and angle programming.
          Graphical control system with “finger touch screen”
          - Working Length: 2020 mm
          - Mac sheet thickness: 1,5 mm
          - Max. clamping bar lift: 100 mm
          - Motor clamping: 0,37 kW
          - Motor folding: 0,75 kW
          - Weight: 1010 kg

E.2.4     BENDING MACHINE, UNIVERSAL
          Bending machine, universal                                                              2
          . Flat steel 100x5 / 100x15 mm
          . Round steel 18 / 30 mm
          . Square steel 16x16 / 30x30 mm
          . Angle steel 60x8 / 100x12 mm
E.2.5     SHEET METAL CORNER NOTCHING
          Corner notching machine                                                                 1
          . Hand operated tabel model
          . Adjustable knives
          . Metric scale with adjustable gauge
          . Capacity 102x102x3 mm
          . Work table 380x280 mm
          INCLUDING:
          Special machine stand                                                                   1
E.2.6     BENCH LEVER SHEARING MACHINE
          Bench profile shear                                                                     1
          . Steel plate 10 mm
          . Square 20x20 mm
          . Strip 90x14 mm
          . Round 22 mm
          . L/T steel 60x7 mm
          . Length of knives 170 mm
E.2.7     BENCH SHEAR
          Bench shear                                                                             1
          . Steel plate 6 mm
          . Strip 70x6 mm
          . Round 13 mm
          . Length of knives 200 mm
E.2.8     SHEET METAL GUILLOTINE MACHINE
          Guillotine shear, electric operated                                                     1
          . Mechanical shear with gear driven electric brake
          . Fine adjustment of knives
          . Automatic rubber covered clamping beam
          . Capacity 1275x3,0 mm
          . No. of cuts per minute 35
          . Motor 3,0 kw
          . Back gauge 635 mm
          Complete with: hand operated back gauge with metric
          counter, illumination of cutting line, mobile 24V foot
          operated switch, table extension 600 mm, adjustable
          machine feet, angle gauge on work table, thermal
          overload protection, safety cage


 E.2.9    DRILLING, BENCH, 20 MM
E.2.9.1   Bench drilling machine, 20 mm                                                           1
          . Spindle MT 2
          . Throat 152 mm
          . Speed range 500-2500 rpm
          . No. of speeds 5
          . Table size 235x220 mm
E.2.9.2   Machine vice, 100 mm                                                                    1
          · Smooth running with exact jaw guiding, also at high
          axial load
          · Spindle with rolled trapezoid thread for smooth
          running
          · Multiple possibilities for assembly on the drilling table
          due to oblong holes
          Technical Data:
          - Jaw width: 100 mm
          - Span: 90 mm
          - Jaw height: 28 mm




                                                                          17 of 46
                                                      LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                     Hag     Halfait El   Souk El
  Item     Description                                                 Kerari                                       Kht 1
                                                                                    Yousif    Muluk        Mahali
 E.2.9.3   Twist drill set, 1 to 13 mm                                                           1
           · 25 pcs; 1 - 13 mm
           · Metal box

 E.2.10 DRILLING, PEDESTAL, 25 MM
E.2.10.1 Pillar drilling machine, 25 mm                                                          1
         . Spindle MT 3
         . Throat 210 mm
         . Speed range 200-2440 rpm
         . No. of speeds 12
         . Table size 330x290 mm
E.2.10.2 Machine vice, 120 mm                                                                    1
         · Smooth running with exact jaw guiding, also at high
         axial load
         · Spindle with rolled trapezoid thread for smooth
         running
         · Multiple possibilities for assembly on the drilling table
         due to oblong holes
         Technical Data:
         - Jaw width: 120 mm
         - Span: 90 mm
         - Jaw height: 28 mm
E.2.10.4 Drill chuck, 13 mm                                                                      1
         - precision quick-action draw-in collet chuck
         · Concentricity accuracy less than 0.06 mm
         - Capacity: 0 - 13 mm
         - Collet: B16
E.2.10.5 Reduction sleeve set, morse taper MT 3-2                                                1
E.2.10.6 Ejecting drift set                                                                      1
E.2.10.7 Machine vice, 125 mm                                                                    1
         · Smooth running with exact jaw guiding, also at high
         axial load
         · Spindle with rolled trapezoid thread for smooth
         running
         · Multiple possibilities for assembly on the drilling table
         due to oblong holes
         Technical data:
         - Jaw width: 125 mm
         - Span: 110 mm
         - Jaw height: 30 mm
E.2.10.8 Machine clamp set, 52 pcs                                                               1
         · Handy wall unit
         · Metric thread
         · 24 pcs draw-in bolts
         · 6 pcs T-slot nuts
         · 6 pcs nuts
         · 4 pcs coupling nuts
         · 6 pcs step blocks
         · 12 pcs step clamps
         · T-slot nuts (size 18 mm) draw bar thread M 16
E.2.10.9 Adjustable wrench set, 3 pcs, 20 mm, 25 mm, 34 mm                                       1
         Hardened and heat treated steel with satin chrome
         finish. Fully polished, offset jaws. Slim raised lip style
         handle with hanging hole.
         Length: 150, 200, 250 mm
         Capacity: 20, 25, 34 mm

E.2.10.10 Twist drill set, 1 to 13 mm                                                            1
          · 25 pcs; 1 - 13 mm
          · Metal box

 E.2.11 BELT GRINDER
E.2.11.1 Belt grinder                                                                            1
         . Voltage 380/415V/3Ph/50-60 Hz
         . Power 4000 W
         . Speed 2800 rpm.
         . Belt size 2000x75x80 mm
         . Flat grinding surface 650x150 mm
         . Weight 100 kg
E.2.11.2 Grinding belt set, 2000x150 mm, grit 40, 10 pcs                                         1
E.2.11.3 Grinding belt set, 2000x150 mm, grit 80, 10 pcs                                         1
 E.2.12 GRINDER, PEDESTAL, 200 MM
E.2.12.1 Pedestal grinder , 200 mm                                                               1
         . Voltage 220-240V/1Ph/50-60Hz
         . Power 900 W
         . Speed 2800 rpm
         . Grinding wheel 200x25x20 mm
         . Grit 36/80
         . Weight 24 kg
         INCLUDING:
E.2.12.2 Pedestal                                                                                1




                                                                         18 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                     Hag     Halfait El   Souk El
 Item     Description                                                  Kerari                                       Kht 1
                                                                                    Yousif    Muluk        Mahali
E.2.12.3 Grinding wheel, 200x25x20 mm, grit 36                                                   1
E.2.12.4 Grinding wheel, 200x25x20 mm, grit 80                                                   1
E.2.12.5 Grinding wheel dresser, 150 mm                                                          1
         Aluminium alloy body with four star wheels. Suitable
         for cleaning, sharpening and trueing grinding wheel
         surfaces. Suitable for use with any grinder.
         Length: 150 mm

 E.2.13 GRINDER, PEDESTAL, 300 MM
E.2.13.1 Pedestal grinder , 300 mm                                                               1
         . Voltage 380-415V/3Ph/50-60 Hz
         . Power 1300 W
         . Speed 1700 rpm
         . Grinding wheel 300x40x25 mm
         . Grit 36/60
         .Weight 60 kg
         INCLUDING:
E.2.13.2 Pedestal                                                                                1
E.2.13.3 Grinding wheel, 300x40x25 mm, grit 36                                                   1
E.2.13.4 Grinding wheel, 300x40x25 mm, grit 60                                                   1
E.2.13.5 Grinding wheel dresser, 150 mm                                                          1
         Aluminium alloy body with four star wheels. Suitable
         for cleaning, sharpening and trueing grinding wheel
         surfaces. Suitable for use with any grinder.
         Length: 150 mm

E.2.14    SWAGING, BEADING, BURNING & WIRING MACHINE
          Swaging, beading, burring, wiring machine                                              2
          . Hand operated model for table mounting
          . For productions of different types of edge/rim finishing
          . Accurate bearings for axles
          . Stable cast iron construction
          . Adjustable gauge
          . Easy to mount
          . Capacity 1,25 mm
          . Center distance 62 mm
          . Throat 250 mm
          Complete with 5 pairs of different wheels


E.2.15    PUNCHING MACHINE, BENCH TYPE
          Punching machine                                                                       1
          . Hand operated bench mounted model
          . Punches round holes upto 15 mm diameter in 4 mm
          steel
          . Throat 120 mm
          . Punch size 38x10 mm
          . Die size 48x30x12 mm
          . Bore of punching slide
          Complet with set of punches 6, 8, 10, 12, 14, 16 mm
E.2.16    SCREW PRESS, BENCH TYPE
          Screw press, 100 kN                                                                    1
          Deluxe Range
          10ton Bench Press
          Hydraulics with internal return springs built into the
          head of the press to provide greater unimpeded
          access to working area.
          Type: Bench
          Capacity: 10ton
          Ram Stroke: 95mm
          Extension Screw: 70mm
          Maximum Ht. - Ram to Table: 455mm
          Minimum Ht. - Ram to Table: 155mm
          Table Aperture: 140mm
          Working Table Width: 500mm
          Overall Height: 1035mm
          Gauge Included: Yes
          Weight: 76kg


E.2.17    HYDRAULIC PRESS
          Hydraulic press, hand operated                                                         1
          . Capacity 40 ton / 400 kn
          . Single stage hand pump with automatic return
          . Pressure gauge standard mounted
          . Table adjustable in height
          . Max. workpiece height 1100 mm
          . Max. working width 650 mm

          SHEET METAL TOOLS
E.2.18    SHAPING/FORMING/RIVETING TOOLS




                                                                         19 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                   Hag     Halfait El   Souk El
  Item    Description                                                Kerari                                       Kht 1
                                                                                  Yousif    Muluk        Mahali
E.2.18.1 Bench plate stand                                                                     2
         suitable for Sockets, Hatches Stakes, Bording Sockets
         up to 80 mm, Anvils for Tinkers 60 mm
E.2.18.2 Tinman‟s stake set/a                                                                  2
         straight face, with one bevel, weights 700, 1000, 1400
         g
         face grinded to the middle, weights 700, 1000, 1400 g

E.2.18.3 Tinman‟s stake set/b                                                                  2
         - Oval face
         - Weight: 1000 and 1400 g
E.2.18.4 Tinman‟s stake set/c                                                                  2
         - straight face, one side rounded off
         - Weight: 1000 and 1400 g
E.2.18.5 Tinman‟s stake set/d                                                                  2
         - Ball face
         - Weight: 1000 and 1400 g
E.2.18.6 Tinman‟s stake set/e                                                                  4
         - working face fine polished, round, face flat
         - Weights: 800, 1000 and 1600 g
E.2.18.7 Tinman‟s stake set/f                                                                  4
         - working face fine polished, flat face, 2 corners
         rounded off
         - Weights: 1000 and 1600 g
E.2.18.8 Tinman‟s stake set/g                                                                  4
         - working face fine polished, round face, slightly belled
         - Weights: 800, 1000 and 1600 g

E.2.18.9 Tinman‟s stake set/h                                                                  4
          - working face fine polished, round face, bowed to the
          middle
          - Weights: 800, 1000 and 1600 g
E.2.18.10 Tinman‟s stake set/i                                                                 4
          - working face fine polished, face high bowed
          - Weights: 800, 1000 and 1600 g
E.2.18.11 Tinman‟s stake set/j                                                                 4
          - working face fine polished, working face flat
          - Weight: 1000 g
E.2.18.12 Tinman‟s stake set/k                                                                 4
          - working face fine polished, face high bowed
          - Weights: 1500 and 2250 g
E.2.18.13 Tinman‟s stake set/l                                                                 4
          - Bording socket
          - Weights: 750, 1200 and 1500 g
E.2.18.14 Rivet punch set, 2 to 10 mm                                                          12
          - Octogon, chrome vanadium
          - sizes 2, 3, 4, 5, 6, 8 and 10 mm
E.2.18.15 Rivet snap set                                                                       12
          - Octogon, chrome vanadium
          - sizes 2, 3, 4, 5, 6, 8 and 10 mm
E.2.18.16 Rivet set-up                                                                         12
          - sizes 2, 3, 4, 5, 6, 8 and 10 mm
E.2.18.17 Riveting hammer, 500 g                                                               12
          - German pattern
E.2.18.18 Tinman‟s mallet, 50 mm dia                                                           12
          Head white beech wood material with metal coat, oval
          ashen handle. Handle and wedge glued.
E.2.18.19 Rubber mallets, 2.5 lb                                                               12
          General purpose mallet. Gives a gentle but firm blow
          with little rebound.
E.2.18.20 Hollowing hammer set                                                                 12
E.2.18.21 Creasing hammer set                                                                  12
E.2.18.22 Riveting hammer set                                                                  12
          - German Pattern
          - Weights: 100, 200, 400 and 800
E.2.18.23 Rubber mallets, 2.5 lb                                                               12
          General purpose mallet. Gives a gentle but firm blow
          with little rebound.
E.2.18.24 Double ended scriber, 200 mm                                                         12
          Precision manufactured tool with hardened steel tips.
          Features straight and 90° tips with knurled body.
          Length: 200 mm

E.2.18.25 Bench vice, 150 mm. Fixed base                                                       12
          Bench mounting, steel vice with anvil. Fixed base
          directly mounts onto work bench and a swivel vice
          plate adaptor. Guaranteed for 5 years against
          breakage.
          Jaw Size: 150mm
          Jaw Opening: 180mm




                                                                       20 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                  Hag     Halfait El   Souk El
  Item    Description                                               Kerari                                       Kht 1
                                                                                 Yousif    Muluk        Mahali
E.2.18.26 Surface plate, 400x400x60 mm                                                        4
          • highest quality
          • • Diamond - lapped measuring surfaces, acc. to DIN
          876
          • Extreme hard and wear - resistant, acid - resistant
          • T-Slots acc. to DIN 650, made of steel
          • Delivery incl. workshop calibration - certificate
          • with charge plates made of black granite
E.2.18.27 Steel rule, 1000 mm                                                                 12
          High quality steel rules permanently marked in Metric
          and Imperial graduations. Includes hanging hole.
          Length: 1000 mm


 E.2.19 SOLDERING
E.2.19.1 Soldering iron, 500 W                                                                12
         STANNOL Soldering Iron 500W, 230V~
         for workshop and factory, seam-soldering on
         metal sheets up tp 2,5 mm thickness, with
         metal heating conductor in steel body, with
         wooden handle, with straight copper tip,
         approx. 1,5m cable and safety plug,
         tip temperature approx. 580°C, heating-up
         time approx. 4 min.
         in PVC hard-box
E.2.19.2 Wire brush, 4 rows of 16                                                             12
         Wooden stocked brush with steel fill. Suitable for
         general purpose applications.
         Length Fill/Overall: 130/260mm
         Fill Pattern: 4 Rows of 16

E.2.19.3 C-cramp mall/cast iron, 200 mm                                                       12
         Hand held vice for the secure clamping of component
         parts prior to grinding, drilling, etc.
         Capacity: 200 mm
         Width: 85 mm
E.2.19.4 Sheet metal and welding clamp set, 3 pcs                                             12
         Heat-treated steel jaws with bright nickel plate finish.
         Knurled jaw adjustment screw with lever type release.
         Supplied in tool roll.
         Length: 170, 275, 450mm.

E.2.19.5 Sheet metal and welding clamp set, 3 pcs                                             12
         Heat-treated steel jaws with bright nickel plate finish.
         Knurled jaw adjustment screw with lever type release.
         Supplied in tool roll.
         Length: 170, 275, 450mm.

E.2.19.6 SOLDERING TORCH With accessories                                                     12
E.2.19.7 Water pump pliers, 250 mm                                                            12
          manufactured from chrome vanadium electric steel, oil
          hardened, tempered and chrome plated, with smoothly
          ground jaws, joint faces and an accurately formed box
          joint with safety stop. The parallelogram-shaped
          gripping surfaces have specially hardened teeth to
          61HRC for positive grip on pipes and nuts. One hand
          press button adjustment.Heavy duty moulded handles
          with slip guards for extra safety. Has 'no-nip' feature
          which prevents handles locking together and
          damaging users' hands.
E.2.19.8 Paint brush set, 2 pcs, round, flat brush                                            12
E.2.19.9 Triangular scraper, 80 mm                                                            12
E.2.19.10 Scraper and hook set, 5 pcs                                                         12
          Chrome Vanadium steel shafts with blackened finish.
          Suitable for gasket scraping, pin/clip picking, hose
          removal. Classic styled handles. Sizes range from 180
          to 280mm.
          Contents: Multi-purpose Scraper; 215, 280mm, Awl
          210mm, Pin Puller 225mm, Hose Hook 180mm

 E.2.20 TOOL BOX
E.2.20.1 Hacksaw frame, 300 mm                                                                12
         General purpose with an adjustable round steel tube
         bow frame for 250mm and 300mm blades. Shaped
         diecast handle. Supplied complete with a 250mm
         carbon steel blade




                                                                      21 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                   Hag     Halfait El   Souk El
  Item     Description                                               Kerari                                       Kht 1
                                                                                  Yousif    Muluk        Mahali
E.2.20.2 Mechanics screwdriver 8x150 mm                                                        12
         Satin chrome plated chrome vanadium steel blades
         hardened and tempered with shot blasted tip. Some
         sizes have a hexagon bolster which enables extra
         power to be obtained by use of a spanner. Square matt
         black handles manufactured from high impact resistant
         plastic.
E.2.20.3 Screwdriver, 9.0x300 mm                                                               12
         Satin chrome plated chrome vanadium steel blades
         hardened and tempered with shot blasted tip. Some
         sizes have a hexagon bolster which enables extra
         power to be obtained by use of a spanner. Square matt
         black handles manufactured from high impact resistant
         plastic.
E.2.20.4 Double ended scriber, 200 mm                                                          12
         Precision manufactured tool with hardened steel tips.
         Features straight and 90° tips with knurled body.
         Length: 200 mm

E.2.20.5 Tinmans shears, straight, 250 mm                                                      12
         For long straight cuts
         Berlin pattern, pinch protection, right cutting, cushion
         grip handles
         high grade tool steel
         Length: 250 mm
E.2.20.6 Tinman‟s shears, curved, 280 mm                                                       12
         For straight and profile cuts.
         Pinch protection, right cutting, cushion grip handles
         High grade tool steel
         Length: 280 mm
E.2.20.7 Engineers precision square, flat, 150x100 mm                                          12
         Suitable for inspection rooms and test laboratories
         • Stainless steel or made from special carbon steel
         • Extra fine ground pattern
         • Flat or with back
E.2.20.8 Ball pein hammer, 450 g                                                               12
         Well balanced hammer with a drop-forged steel head
         and fitted with a high quality hickory shaft.
         Manufactured and tested to BS876.
         Weight: 450 g
E.2.20.9 Adjustable pipe wrench 13-50 mm                                                       12
         Shell moulded cast steel handle with high quality drop
         forged carbon steel jaws. One-piece head design for
         added strength.
         Length: 350mm
         Capacity: 13-50mm

E.2.20.10 Adjustable spanner, 34 mm                                                            12
          Chrome Vanadium steel adjustable wrench. Hardened
          and heat treated with satin chrome finish. Fully
          polished, offset jaws. Slim raised lip style handle with
          hanging hole.
          Size: 250mm
          Capacity: 34mm

E.2.20.11 Water pump pliers, 250 mm                                                            12
          manufactured from chrome vanadium electric steel, oil
          hardened, tempered and chrome plated, with smoothly
          ground jaws, joint faces and an accurately formed box
          joint with safety stop. The parallelogram-shaped
          gripping surfaces have specially hardened teeth to
          61HRC for positive grip on pipes and nuts. One hand
          press button adjustment.Heavy duty moulded handles
          with slip guards for extra safety. Has 'no-nip' feature
          which prevents handles locking together and
          damaging users' hands.
E.2.20.12 Combination pliers, 180 mm                                                           12
          drop forged from chrome vanadium steel, hardened
          and tempered with additionally induction hardened
          cutting edges. lacquered finish for corrosion protection
          with heavy duty, soft grip handles with slip guards.

E.2.20.13 Round nose pliers, 160 mm                                                            12
          for delicate and accurate work in a continuous
          production environment. Manufactured from special
          tools steel, oil hardened and tempered. With pointed
          round jaws and cushion-grip spring-loaded handles.




                                                                       22 of 46
                                                        LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                      Hag     Halfait El   Souk El
  Item     Description                                                  Kerari                                       Kht 1
                                                                                     Yousif    Muluk        Mahali
E.2.20.14 Cold chisel, 19 mm                                                                      12
          High quality octagonal steel stock with ground cutting
          edge. Manufactured and tested to BS3066.
          Width: 19 mm
          Length: 250 mm
E.2.20.15 Cold chisel, 12 mm                                                                      12
          High quality octagonal steel stock with ground cutting
          edge. Manufactured and tested to BS3066.
          Width: 12 mm
          Length: 200 mm
E.2.20.16 Pointing trowel, soft grip, 150 mm                                                      12
          Expert Quality, carbon steel blade hardened and
          tempered with lacquered finish. Blade firmly fixed to
          tang by heavy duty weld. Soft grip handle for user
          comfort.
E.2.20.17 Halfround cabinet file, second cut, 250 mm                                              12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.20.18 Flat file, second cut, 250 mm                                                           12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.20.19 Hand file, second cut, 250 mm                                                           12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.20.20 Halfround file, second cut, 250 mm                                                      12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.20.21 Round file, second cut, 250 mm                                                          12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.20.22 Square file, second cut, 250 mm                                                         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.20.23 Three square file, second cut                                                           12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.20.24 File handle, 110 mm                                                                     12
E.2.20.25 Filecard cleaning brush                                                                 12
          For the cleaning of files, etc. Filled with file card steel
          wire 360 points per square inch. Brush width 25mm.
          Filled Length: 90mm. Beechwood handle.
E.2.20.26 Plumber‟s knife                                                                         12
          Supplied with high quality stainless steel blade. Fitted
          with aluminium alloy handle with rubber grip for added
          comfort and control. Blade locks open for safe use.
          Fitted with belt clip.
          Closed Length: 95mm
          Open Length: 165mm

E.2.20.27 Divider, spring type, 150 mm                                                            12
          • Steel, with hardened points
          • Square legs , chromed pattern
          • With quick adjusting spring nut and fine adjustment
E.2.20.28 Steel rule, 300 mm/12"                                                                  12
          High quality steel rules permanently marked in Metric
          and Imperial graduations. Includes hanging hole.
          Length: 300 mm

E.2.20.29 Measuring tape, 3 m                                                                     12
          High visibility, composite case with rubber cover, wrist
          strap and belt clip. Steel blade with Metric and Imperial
          scale. Strong rewind mechanism with slide-button lock
          and side and base mounted push-button locks for
          added versatility.
          Tape Length: 3mtr(10ft)
          Tape Width: 16mm

E.2.20.30 Plumb bob, brass, 100 g                                                                 12
          Expert Quality, precision machined solid brass plumb
          bobs with 5M (approx.) of nylon line.
E.2.20.31 Triangular scraper, 80 mm                                                               12
E.2.20.32 Rivet punch set, 2 to 10 mm                                                             12
E.2.20.33 Tool box, 5-tray, 530 mm, sheet steel, laquered                                         12




                                                                          23 of 46
                                                      LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                   Hag     Halfait El   Souk El
  Item     Description                                               Kerari                                       Kht 1
                                                                                  Yousif    Muluk        Mahali
 E.2.21 LAYING OUT WORKBENCH
E.2.21.1 Tinman‟s steel square, 600x400 mm                                                     12
         • Made from steel, black coated surface
         • With printed graduation on front- and backside
E.2.21.2 Divider, spring type, 150 mm                                                          12
         • Steel, with hardened points
         • Square legs , chromed pattern
         • With quick adjusting spring nut and fine adjustment
E.2.21.3 Universal bevel protractor, 300 mm                                                    12
         Top Quality, suitable for calibration purpose
         • Stainless, hardened and fine ground
         • Scales satin chrome finish
         • Parallaxfree vernier reading, with large magnifying
         lens
         • With fine adjustment
E.2.21.4 Steel rule, 600 mm                                                                    12
         High quality steel rules permanently marked in Metric
         and Imperial graduations. Includes hanging hole.
         Length: 600 mm

E.2.21.5 Steel rule, 1000 mm                                                                   12
         High quality steel rules permanently marked in Metric
         and Imperial graduations. Includes hanging hole.
         Length: 1000 mm

E.2.21.6 Tinmans shears, straight, 250 mm                                                      12
          For long straight cuts
          Berlin pattern, pinch protection, right cutting, cushion
          grip handles
          high grade tool steel
          Length: 250 mm
E.2.21.7 Tinmans shears, straight, 250 mm                                                      12
          For long straight cuts
          Berlin pattern, pinch protection, right cutting, cushion
          grip handles
          high grade tool steel
          Length: 250 mm
E.2.21.8 Riveting hammer, 500 g                                                                12
E.2.21.9 Tinman‟s mallet, 50 mm dia                                                            12
E.2.21.10 Gas Torch                                                                            12
E.2.21.11 Centre punch, automatic, 125 mm                                                      12
          Knurled brass barrel with spring loaded alloy steel
          point.
          Length: 125 mm
E.2.21.12 C-cramp mall/cast iron, 200 mm                                                       12
          Hand held vice for the secure clamping of component
          parts prior to grinding, drilling, etc.
          Capacity: 200 mm
          Width: 85 mm

          FURNITURE
 E.2.22 WORKBENCH
E.2.22.1 Workbench                                                                             6
          - Size: 2150x950x865 mm
          - 40 mm thick plywood worktop
          - sheet steel top
          - 1 drawer
E.2.22.2 Layout Workbench                                                                      4
          - Size: 2150x950x865 mm
          - 40 mm thick plywood worktop
          - sheet steel top
          - 1 drawer
E.2.22.10 Tool panel including clips                                                           4

 E.2.23 GENERAL EQUIPMENT
E.2.23.1 Adjustable pipe wrench 13-50 mm                                                       12
         Shell moulded cast steel handle with high quality drop
         forged carbon steel jaws. One-piece head design for
         added strength.
         Length: 350mm
         Capacity: 13-50mm

E.2.23.2 Adjustable spanner, 55 mm                                                             12
         Chrome Vanadium steel adjustable wrench. Hardened
         and heat treated with satin chrome finish. Fully
         polished, offset jaws. Slim raised lip style handle with
         hanging hole.
         Size: 450mm(18”)
         Capacity: 55mm




                                                                       24 of 46
                                                       LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                     Hag     Halfait El   Souk El
  Item     Description                                                 Kerari                                       Kht 1
                                                                                    Yousif    Muluk        Mahali
E.2.23.3 Adjustable wrench set, 3 pcs, 20 mm, 25 mm, 34 mm                                       12
         Hardened and heat treated steel with satin chrome
         finish. Fully polished, offset jaws. Slim raised lip style
         handle with hanging hole.
         Length: 150, 200, 250 mm
         Capacity: 20, 25, 34 mm

E.2.23.4 Allen key set, 1.5 to 10 mm, 10 pcs                                                     12
         Manufactured from chrome vanadium steel hardened
         and tempered, each held on key ring type holder.
         Display packed.
         Contents: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, 8.0 and
         10.0mm.
E.2.23.5 Angle grinder, 125 mm                                                                   12
         . Disc diameter 125 mm
         . Rated input power 650 W
         . No-load speed 11000/min
         . Spindle thread M14
         . Weight 1,4 kg
         . Standard accessories:
         . Spanner
         . Side handle
E.2.23.6 Set cutting / grinding discs, 10 pcs                                                    12
E.2.23.7 Angle grinder, 230 mm                                                                   12
         . Disc diameter 230 mm
         . Rated input power 2500 W
         . No-load speed 6600/min
         . Spindle thread M14
         . Weight 5,5 kg
         . Standard accessories:
         . Spanner
         . Side handle
E.2.23.8 Set cutting / grinding discs, 10 pcs                                                    12
E.2.23.9 Bench mounting pipe vice, 10-85 mm                                                      12
         Cast frame and base with mounting holes. Hinged
         design for easy insertion of pipe into vice. Suitable for
         electrical conduits and air installations.
         Capacity: Ø10-85mm
         Weight: 5.1kg

E.2.23.10 Bench vice, 150 mm. Fixed base                                                         12
          Bench mounting, steel vice with anvil suitable for
          workshop, garage and machine-shop use. Fixed base
          directly mounts onto work bench and a swivel vice
          plate adaptor is available as an optional extra.
          Guaranteed for 5 years against breakage.
          Jaw Size: 150mm
          Jaw Opening: 180mm

E.2.23.11 Bevel edge chisel, 150 mm, 4 pcs, 6,12,20,26 mm                                        12
          Full length bevel edged blades manufactured from
          chrome vanadium steel hardened, tempered, finely
          ground and clear lacquer coated for corrosion
          protection. Impact-resistant polypropylene handles. All
          blades have blade guards.
          Contents: 6, 12, 20 and 26mm (blade widths)
E.2.23.12 Centre bolt cutter 900 mm                                                              12
          Expert Quality, suitable for cutting high tensile material
          up to 40 HRC. Jaws hardened to HRC 58-60 to give
          long life. Centre cut jaw pattern. Grips on handles.
          Spare jaws are available.
          Capacity: 16 mm
E.2.23.13 Bottom screw chain vise 3-167 mm, with portable stand                                  12

E.2.23.14 Cable extension reel, 50 m, 3x1,5 mm2                                                  4
          Durable composite drum on steel stand with three
          230V power sockets and thermal overload protection.
          Fitted with ASTA/BS approved 3-pin plug. Fitted with
          cable guide to prevent cable tangling.
          Voltage: 230V
          Cable Length: 50mtr
          Cable Section: 3 x 1.5mm²
          Cable Type: PVC
          Sockets: 3
          Thermal Trip: Yes
          Drum Size: Large
          Drum Type: Composite
          Capacity Wound: 1000W
          Capacity Unwound: 3500W




                                                                         25 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                   Hag     Halfait El   Souk El
  Item    Description                                                Kerari                                       Kht 1
                                                                                  Yousif    Muluk        Mahali
E.2.23.15 C-cramp mall/cast iron, 200 mm                                                       12
          Hand held vice for the secure clamping of component
          parts prior to grinding, drilling, etc.
          Capacity: 200 mm
          Width: 85 mm
E.2.23.16 Circle cutter 27-104 mm                                                              12
E.2.23.17 Combination pliers, 180 mm                                                           12
          drop forged from chrome vanadium steel, hardened
          and tempered with additionally induction hardened
          cutting edges. lacquered finish for corrosion protection
          with heavy duty, soft grip handles with slip guards.

E.2.23.18 Combination square, 300 mm                                                           8
          Matt black metal stock with polished faces, brass
          adjusting screw, spirit level and scriber. Aluminium
          blade graduated (on both sides of the blade) metric on
          one edge and imperial on the other.
E.2.23.19 Crows foot wrench metric set, 10 pcs                                                 8
          Chrome Vanadium steel jaws with 3/8”Sq drives
          suitable for limited access applications. Heat treated
          and hardened with chrome finish. Supplied on clip-rail.
          Contents: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm


E.2.23.20 Divider, firm joint type, 150 mm                                                     24
          • Stainless Steel, with hardened points
          • Square legs, chromed pattern
          • With rivet
E.2.23.21 Cordless drill / screwdriver, 10 mm                                                  4
          . Capacity in steel 10 mm
          . Capacity in wood 21 mm
          . Maximum torque 22 Nm
          . No-load speed 0-280 / 0- 840/min
          . Weight 1,4 kg
          . Battery 9,6 V (1.400mAh)
          . Battery charger UC18YG, 220 V, 50/60Hz
          . Standard accessories:
          . 2 batteries
          . 1 charger
          . 1 Torch light UB12D
          . Bitt set
          . Plastic case
E.2.23.22 Twist drill set, 1 to 10 mm, 19 pcs                                                  12
E.2.23.23 Electric drill, 13 mm                                                                 4
          . Capacity in steel 13 mm
          . Capacity in wood 40 mm
          . Rated input power 790 W
          . No-load speed 0-1000 /3000/min
          . Collar diameter 43 mm
          . Weight 2 kg
          . Standard accessories:
          . Handle
          . Depth stop
E.2.23.24 Twist drill set, 1 to 13 mm, 25 pcs                                                  12
E.2.23.25
E.2.23.26 Engineer's file set, 5 pcs                                                           12
          Popular set of assorted files with comfort grip handles.
          Each file is double cut for faster removal of material
          from workpiece.
          Length: 200mm
          Contents: Half-Round, Square, Round, Three-Square,
          Flat

E.2.23.27 External micrometer, 0-25 mm                                                         12
          For standard expectations
          • Drum and sleeve satin chrome finish
          • Chromed frame
          • Tungsten carbide measuring faces
          • Insulation plates
          • Locking lever for quick and precise fixing
          • With ratchet for constant measuring pressure
          • Delivery with setting key, from up 25 mm with setting
          gauge
E.2.23.28 Face shield                                                                          24
          BSEN166 - Ratchet adjustable headband with brushed
          nylon comfort band. Competitive quality for automotive,
          agricultural and industrial applications.
          Type: Brow Guard and Face Shield
          Replacement Visor:
          Model No: SSP11E/R
          Type: Clear




                                                                       26 of 46
                                                       LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                      Hag     Halfait El   Souk El
  Item     Description                                                  Kerari                                       Kht 1
                                                                                     Yousif    Muluk        Mahali
E.2.23.29 Filecard cleaning brush                                                                 24
          For the cleaning of files, etc. Filled with file card steel
          wire 360 points per square inch. Brush width 25mm.
          Filled Length: 90mm. Beechwood handle.
E.2.23.30 Flat scrapers, set of 3 pcs                                                             12
          2.0mm Ultra-stiff hardened stainless steel scraper
          blades suitable for numerous workshop and body shop
          tasks including gasket scraping and windscreen
          preparation. Soft grip handles and broad hilt design
          give maximum control. Cap permits careful use with
          hammer.
          Contents: Scrapers; 13 x 53, 16 x 100, 20 x 50mm

E.2.23.31 Flat steel square, 300x200 mm                                                           12
          Suitable for inspection rooms and test laboratories
          • Stainless steel or made from special carbon steel
          • Extra fine ground pattern
          • Flat or with back
E.2.23.32 Funnel, 160 mm                                                                          8
          Polyethylene funnel resistant to oil, fuel and some
          acids. Removable two-step flexible spout. Ideal for
          vehicles with smaller diameter unleaded filler necks.
          Fitted with handle and removable brass filter.
          Diameter: 160 mm
E.2.23.33 Hand vice, 100 mm                                                                       12
          Hand held vice for the secure clamping of component
          parts prior to grinding, drilling, etc.
          Capacity: 19 mm
          Width: 36 mm
E.2.23.34 Hollow punch set, 5 to 32 mm                                                            12
          Carbon steel body with spring loaded centring pin.
          Suitable for cutting gasket material or cork, leather etc.
          Supplied in carry-case with nine dies.
          Contents: Dies; 5, 6, 8, 10, 12.5, 16, 20, 25, 32mm,
          Punch

E.2.23.35 Inside calliper, 150 mm                                                                 12
          • Steel, with hardened points
          • Flat legs, polished
          • With rivet
E.2.23.36 Ladder, 3-way aluminium ladder, capacity 150 kg                                         2
          BS 2037:1994 Class 1 three-way multi-use aluminium
          ladder with 130kg Duty Rating. Maximum capacity
          175kg. Compact size for easy handling and storage.
          Supplied with work tray with provision for paint tin,
          brushes, screwdrivers, etc. Can be used as an offset
          step ladder on stairs or platforms, standard step ladder
          or two-section extension ladder.
          Configuration offset step ladder
          Maximum reach height: 2340mm
          Step height: 1240 mm
          Configuration Step ladder
          Maximum reach height: 2390 mm
          Step height: 1290 mm
          Configuration 2 section extension
          Maximum reach height: 3190 mm
          Step height: 2090 mm

E.2.23.37 Letter stamp set, 4 mm                                                                  12
          Hardened, tempered and chemically blackened. Set of
          27 alphabetic punches. 4mm Character height.
          Supplied in plastic case.
E.2.23.38 Needle file set, 10 pcs                                                                 12
          Popular sized needle files. Knurled handle shafts for
          extra grip. Average overall length 140mm.
          Contents: Flat Parallel, Flat Taper, Half-round, Three-
          square, Square Form, Round Form, Knife Form,
          Crossing File, Barrette File, Oval Form

E.2.23.39 Number stamp set, 4 mm                                                                  12
          Hardened, tempered and chemically blackened. Set of
          9 numeric punches (number 6 doubles as 9). 4mm
          Character height. Supplied in plastic case.
E.2.23.40 Open-ended spanner set, 8 pcs                                                           12
          Expert Quality, forged from chrome vanadium steel
          hardened, tempered, chrome plated and fully polished.
          Open ends set at 15°. Supplied on wall mountable
          plastic rack. Display packed.
          Contents: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x
          17,
          18 x 19 and 20 x 22mm




                                                                          27 of 46
                                                      LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                     Hag     Halfait El   Souk El
  Item     Description                                                 Kerari                                       Kht 1
                                                                                    Yousif    Muluk        Mahali
E.2.23.41 Outside calliper, 150 mm                                                               12
          • Steel, with hardened points
          • Flat legs, polished
          • With rivet
E.2.23.42 Paint brush set, 2 pcs, round, flat brush                                              12
E.2.23.43 Pipe cutter, 50 mm                                                                     12
          Heavy-duty die-cast body with hardened steel blade
          for cutting steel and cast iron pipe. Two wide rollers for
          extra control with less burring leaving a clean cut.
          Capacity: Ø3-50mm

E.2.23.44 Plumb bob, brass, 100 g                                                                12
          Expert Quality, precision machined solid brass plumb
          bobs with 5M (approx.) of nylon line.
E.2.23.45 Pop riveter                                                                            12
          GS/TUV Approved drop forged aluminium body with
          heavy -duty SCM4 grade jaws, carbon steel jaw case
          and pin. PVC handle grips. Supplied with four rivet
          nozzles to accept 2.4mm(3/32”), 3.2mm(1/8”),
          4.0mm(5/32”) and 4.8mm(3/16”) rivets. Supplied with
          nozzle spanner.
          Length: 270mm
          Rivet Type:
          Aluminium: Yes
          Steel: Yes
          Stainless Steel: Yes

E.2.23.46 Electric power shear, portable, 1,6 mm                                                 12
          . Capacity in steel 1,6 mm
          . Capacity in Stainless steel 1,2
          . Capacity in aluminium 2,3 mm
          . Rated input power 400 W
          . No-load speed 2300/min
          . Radius 40 mm
          . Weight 1,6 kg
          . Standard accessories:
          . 2 allen keys
E.2.23.47 Punch and chisel set, 12 pcs                                                           12
          Hardened, tempered and fully polished Chrome
          Vanadium steel punches and chisels. Supplied in tool
          roll.
          Contents: Centre Punches; #1 x 8 x 100, #2 x 9.5 x
          120mm, Taper Pin Punches; Ø3 x 9.5 x 120, Ø4 x 9.5 x
          120, Ø5 x 9.5 x 120mm, Parallel Pin Punches; Ø2 x 8 x
          115, Ø4 x 9.5 x 150, Ø6 x 12.7 x 180mm, Cold Chisels;
          5 x 9.5 x 130, 7 x 12.7 x 165mm, Utility Chisel x 2, Tool
          Roll

E.2.23.48 Radius gauge set, 16 pcs 7,5 mm-15,0 mm                                                12
          For testing the radius of circle forms
          • Concave and convex shaped blades
          • Fine cutted forms
E.2.23.49 Ratchet drop head threaders                                                            12
          Ratchet type pipe threading kit with cassette style die
          heads. Lightweight design with four tool-steel cutting
          bits. Snap-in die cassettes allow fast interchange
          between pipe sizes. Suitable for iron and stainless
          steel pipe. Twin ratchet pawl head assembly with free
          run facility. Supplied in carry-case.
          Contents: Ratchet Die Stock, Dies; 3/8”,1/2”, 3/4”, 1”, 1-
          1/4”, 1-1/2”, 2”, Two-piece Handle
          Length: 715mm


E.2.23.50 Ratchet stock and dies                                                                 12
          . For 3/8 to 2" BSPT thread
          . Supplied in plastic case
          . Includes ratched and adaptors
E.2.23.51 Revolving head punch pliers                                                            12
          Steel construction with comfort handle sleeve. Suitable
          for punching holes in leather and a variety of other
          materials, including paper, canvas and soft plastics.
          Punch Diameters 2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm


E.2.23.52 Riveting hammer, 500 g                                                                 12
E.2.23.53 Round file, second cut, 250 mm                                                         12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.




                                                                         28 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                    Hag     Halfait El   Souk El
  Item     Description                                                Kerari                                       Kht 1
                                                                                   Yousif    Muluk        Mahali
E.2.23.54 Round nose pliers, 160 mm                                                             12
          for delicate and accurate work in a continuous
          production environment. Manufactured from special
          tools steel, oil hardened and tempered. With pointed
          round jaws and cushion-grip spring-loaded handles.

E.2.23.55 Rubber mallets, 2.5 lb                                                                12
          General purpose mallet. Gives a gentle but firm blow
          with little rebound.
E.2.23.56 Scraper and hook set, 5 pcs                                                           12
          Chrome Vanadium steel shafts with blackened finish.
          Suitable for gasket scraping, pin/clip picking, hose
          removal. Classic styled handles. Sizes range from 180
          to 280mm.
          Contents: Multi-purpose Scraper; 215, 280mm, Awl
          210mm, Pin Puller 225mm, Hose Hook 180mm
E.2.23.57 Screwdriver set, 3 pcs, Phillips no.1,2,3                                             12
E.2.23.58 Screwdriver, 9.0x300 mm                                                               12
E.2.23.59 Sheet metal and welding clamp set, 3 pcs                                              12
          Heat-treated steel jaws with bright nickel plate finish.
          Knurled jaw adjustment screw with lever type release.
          Supplied in tool roll.
          Length: 170, 275, 450mm.

E.2.23.60 Electric power nibbler                                                                 6
E.2.23.61 Sheet metal seamer                                                                    12
          Aids forming, bending, crimping and manipulating
          sheet metal. Eliminates tiresome hand-gripping. Useful
          also for upholstery work.
          Length: 200mm
          Capacity: 0-45mm

E.2.23.62 Snipe nose pliers, 160 mm                                                             12
          for delicate and accurate work in a continuous
          production environment. Manufactured from special
          tools steel, oil hardened and tempered. With flat-round
          jaws and cushion-grip spring-loaded handles.
E.2.23.63 Spark lighter, with flint renewals in box, 10 pcs                                     12
          SUNFIRE TYPE with cup to collect gases, ideal for site
          use, screw on flints.
E.2.23.64 Spirit level, 1200 mm, 1 horizontal and 2 vertical vials                              12
          Heavy-duty 1.2mm extruded aluminium box section
          level. Powder coated for corrosion resistance.
          Features milled faces to top and bottom of level and
          hand-holds for accurate alignment. Accuracy 0.5mm in
          1mtr (0.028°). Model includes one horizontal and two
          vertical vials in composite magnifying windows.
          Includes hanging hole for storage.
          Length: 1200 mm

E.2.23.65 Spirit level, 600 mm                                                                  12
          Heavy-duty 1.2mm extruded aluminium box section
          level. Powder coated for corrosion resistance.
          Features milled faces to top and bottom of level and
          hand-holds for accurate alignment. Accuracy 0.5mm in
          1mtr (0.028°). Model includes one horizontal and two
          vertical vials in composite magnifying windows.
          Includes hanging hole for storage.
          Length: 600 mm

E.2.23.66 Square file, second cut, 250 mm                                                       12
          Carbon chrome steel hardened and tempered with rust
          preventative finish and dipped in rust preventative oil.

E.2.23.67 Steel measuring tape, metric, 30 m                                                    24
          High visibility composite case with rubber cover.
          Flexible steel Metric/Imperial tape with ground spike.
          Geared rewind, with folding handle, for rapid recovery.
          Tape Length: 30mtr(96ft)
          Tape Width: 13mm


E.2.23.68 Steel measuring tape, metric, 5 m                                                     24
          High visibility, composite case with rubber cover, wrist
          strap and belt clip. Steel blade with Metric and Imperial
          scale. Strong rewind mechanism with slide-button lock
          and side and base mounted push-button locks for
          added versatility.
          Tape Length: 5mtr(16ft)
          Tape Width: 19mm




                                                                        29 of 46
                                                     LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                   Hag     Halfait El   Souk El
  Item     Description                                               Kerari                                       Kht 1
                                                                                  Yousif    Muluk        Mahali
E.2.23.69 Step ladder, 7 treads                                                                2
          EN131 Approved aluminium step ladders with 150kg
          capacity. Durable lightweight anodised aluminium alloy
          frame. Deep non-slip steps and wide platform with
          safety rail allow plenty of leg room for safe standing.
          Ribbed feet give full floor contact for extra stability.
          Treads: 7
          Weight: 7.3kg
          Maximum Reach Height: 3280mm
          Base Width: 520mm
          Maximum Capacity: 150kg
          Safety Rail Height: 2150mm
          Step Height: 1530mm


E.2.23.70 Hand grinder, 8 mm                                                                   12
          . Bits size 0-32 mm
          . Collet bore of collet chuck 6 mm
          . Rated input power 480 W
          . No-load speed 10000/min
          . Weight 1,8 kg
          . Standard accessories:
          . 1 wrench 6mm
E.2.23.71 Surface plate, 400x400x60 mm                                                         4
          • highest quality
          • • Diamond - lapped measuring surfaces, acc. to DIN
          876
          • Extreme hard and wear - resistant, acid - resistant
          • T-Slots acc. to DIN 650, made of steel, against extra
          charge
          • Delivery incl. workshop calibration - certificate
          • Charge plates made of black granite
E.2.23.72 Tinman‟s shears, curved, 280 mm                                                      12
          For straight and profile cuts.
          Pinch protection, right cutting, cushion grip handles
          High grade tool steel
          Length: 280 mm
E.2.23.73 Tinman‟s steel square, 600x400 mm                                                    12
          • Made from steel, black coated surface
          • With printed graduation on front- and backside
E.2.23.74 Triangular scraper, 80 mm                                                            12
E.2.23.75 Tube cutter, 30 mm                                                                   12
          Die-cast cutter body with fold-away pipe de-burring
          tool. Smooth action thread with one-piece cutter-slide
          and hardened alloy steel cutting wheel give excellent
          results on all types of soft metal tubing. Supplied with
          spare cutter blade in handle top.
          Capacity: Ø3-32mm(Ø1/8” - 1-1/4”)

E.2.23.76 Universal bevel protractor, 300 mm                                                   12
          Top Quality, suitable for calibration purpose
          • Stainless, hardened and fine ground
          • Scales satin chrome finish
          • Parallaxfree vernier reading, with large magnifying
          lens
          • With fine adjustment
E.2.23.77 Universal surface gauge, 300 mm                                                      12
          For normal workshop use
          • Round and chromed beam, without graduation
          • Hardened drawing point, straight and cranked
          • Drawing point is swivelling and rotating in all
          directions
          • With round cast iron base
E.2.23.78 Vernier caliper, with fixing screw, 0-150 mm                                         12
          Suitable for craftsmen and educational est.
          • Stainless steel, hardened
          • Scale and vernier satin chrome finish
          • Jaws fine ground
          • Mono-block vernier
          • 4-way measuring system
          • Flat depth gauge




                                                                       30 of 46
                                                       LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                     Hag     Halfait El   Souk El
  Item     Description                                                 Kerari                                       Kht 1
                                                                                    Yousif    Muluk        Mahali
E.2.23.79 Vice grip plier, 190 mm                                                                12
          Chrome Vanadium steel jaws hardened and tempered
          with industrial style satin finish. Deeply serrated jaws
          help grip workpiece. Riveted handle construction
          provides extra rigidity and reduces deformation when
          grip is under load. Spring- loaded locking mechanism
          prevents nipping fingertips when releasing.

           General-purpose pliers with reinforced teeth for a
           range of applications.
           Length: 190 mm
           Capacity: 0 - 42 mm

E.2.23.80 Water pump pliers, 250 mm                                                              12
          manufactured from chrome vanadium electric steel, oil
          hardened, tempered and chrome plated, with smoothly
          ground jaws, joint faces and an accurately formed box
          joint with safety stop. The parallelogram-shaped
          gripping surfaces have specially hardened teeth to
          61HRC for positive grip on pipes and nuts. One hand
          press button adjustment.Heavy duty moulded handles
          with slip guards for extra safety. Has 'no-nip' feature
          which prevents handles locking together and
          damaging users' hands.
E.2.23.81 Wire and sheet gauge                                                                   12
          Suitable for the measuring of threads, wires, strings,
          foils etc.
          As special pattern with side discs on the lower wheel
          available
          • Frame made of solid cast iron, hammer blow
          lacquered
          • Measuring wheels hardened and ground
          • Scale rotateable by a knurled outer ring
          • Dial indicator with lifting device
          • Measuring pressure approx. 1,2 N
          Range : 0 - 5 mm
          Reading: 0,01 mm
          Size of wheels: 8,7 x 8,4 mm
E.2.23.82 Wire brush, 4 rows of 16                                                               12
          Wooden stocked brush with steel fill. Suitable for
          general purpose applications.
          Length Fill/Overall: 130/260mm
          Fill Pattern: 4 Rows of 16

         CONSUMABLES
 E.2.24 CONSUMABLES, BASIC REQ. SHEET METAL
E.2.24.1 Hacksaw blade, 300 mm, 32 tpi                                                          200
         Expert Quality saw edge, manufactured from high
         speed steel strip, electron beam welded to high quality
         carbon steel backing. Packed 50 blades to plastic box.

E.2.24.2 Hacksaw blade, 300 mm, 24 tpi                                                          200
         Expert Quality saw edge, manufactured from high
         speed steel strip, electron beam welded to high quality
         carbon steel backing. Packed 50 blades to plastic box.

E.2.24.3 Hacksaw blade, 300 mm, 18 tpi                                                          200
         Expert Quality saw edge, manufactured from high
         speed steel strip, electron beam welded to high quality
         carbon steel backing. Packed 50 blades to plastic box.

E.2.24.4 Filecard cleaning brush                                                                 40
         For the cleaning of files, etc. Filled with file card steel
         wire 360 points per square inch. Brush width 25mm.
         Filled Length: 90mm. Beechwood handle.
E.2.24.5 C-cramp, 100 mm                                                                         24
         Malleable cast iron frame with chrome plated square
         thread screw, tommy bar handle and swivel shoe.
         Capacity : 100 mm
         Throat: 60 mm
E.2.24.6 Round head bolts and nuts kit                                                           12
         - To DIN912
         - Bright zinc plated finish
         - Supplied in polypropylene storage box
         - Sizes: M3 to M8
E.2.24.7 A4 stainless hexagon screw & nut kit                                                    4
         - Kit contains A4 stainless steel screws and nuts (total
         626 pieces)
         - To DIN933/934
         - Highly corrosion resistant
         - Suitable for food, medical, chemical and electronic




                                                                         31 of 46
                                                       LOT E.1./E.2. WELDING AND SHEET METAL




                                                                                      Hag     Halfait El   Souk El
  Item     Description                                                  Kerari                                       Kht 1
                                                                                     Yousif    Muluk        Mahali
E.2.24.8 Selftapping screwkit countersunk/pan head A4                                             4
          stainlessteel
          - A4 grade 18 / 8 stainless steel (Type 316 S16)
          - To DIN 7981 (Pan) and DIN 7982 (Countersunk)
          - Ideal for use in service departments and research
          and development labs
          - Kit contains 890 self tapping screws, supplied in a
          moulded plastic case
E.2.24.9 Flat head screw set                                                                      4
          - A kit containing 1130 6-lobe recess Pan head screws
          in a variety of sizes and lengths. The screws are made
          from low carbon mild steel, to ISO965 Part 2 Coarse
          series, zinc plated and passivated. Supplied in
          polystyrene storage box with details of driver and
          nominal tightening torques
E.2.24.10 Wood screw kit                                                                          4
          GOLD Series screw set supplied in robust metal carry-
          case with double lock system preventing accidental
          opening. Heat treated and hardened to increase
          breaking torque. Zinc plated and coated with yellow
          passivate for corrosion resistance. These screws have
          a wider thread making them ideal for use with MDF
          and chipboard as well as normal soft and hard woods.
          Set includes a selection of nine popular screw sizes
          plus a selection of wall plugs.
          Contents: 3 x 12mm x 200pc, 3.5 x 16mm x 200pc, 3.5
          x 20mm x 200pc, 3.5 x 25mm x 200pc, 4 x 25mm x
          200pc, 4 x 30mm x 200pc, 4 x 40mm x 200pc, 4 x
          50mm x 200pc, 5 x 70mm x 100pc. Wall Plugs; 5mm x
          100pc, 6mm x 100pc, 7mm x 100pc


E.2.24.11 Selftapping screwkit countersunk/pan head A4                                            4
          stainlessteel
          - A4 grade 18 / 8 stainless steel (Type 316 S16)
          - To DIN 7981 (Pan) and DIN 7982 (Countersunk)
          - Ideal for use in service departments and research
          and development labs
          - Kit contains 890 self tapping screws, supplied in a
          moulded plastic case
E.2.24.12 Pop riveter                                                                             4
          GS/TUV Approved drop forged aluminium body with
          heavy -duty SCM4 grade jaws, carbon steel jaw case
          and pin. PVC handle grips. Supplied with four rivet
          nozzles to accept 2.4mm(3/32”), 3.2mm(1/8”),
          4.0mm(5/32”) and 4.8mm(3/16”) rivets. Supplied with
          nozzle spanner.
          Length: 270mm
          Rivet Type:
          Aluminium: Yes
          Steel: Yes
          Stainless Steel: Yes
E.2.24.13 Mixed washer kit                                                                        4
          Kit containing A2 stainless steel plain (flat), single-coil
          spring and internal-teeth shakeproof washers, supplied
          in polypropylene storage cases

E.2.24.14 Washer kit assortment                                                                   4
          Split, internal tooth and external tooth lock washer
          assortment. Partitioned case.
          Contents: Split; Ø3, 4, 5, 6, 8, 10mm, Internal Tooth;
          Ø3, 4, 5, 6, 8, 10mm, External Tooth; Ø3, 4, 5, 6, 8,
          10mm

E.2.24.15 Steel zinc plated metric plain washer kit                                               4
          Kit containing BZP steel plain (flat), single-coil spring
          and internal-teeth shakeproof washers, supplied in
          polypropylene storage cases
E.2.24.16 Rubber washer assortment                                                                4
          Manufactured from Buna-N and approved to American
          Standard TM OIL #1 & #3 Laboratory Test. Partitioned
          interlacing case.
          Contents: 3 x 1.5, 4 x 2, 5 x 2, 7 x 1.5, 10 x 1.5, 13 x
          1.5, 10 x 2.5, 11 x 2.5, 13 x 2.5, 14 x 2.5, 16 x 2.5, 18 x
          2.5, 19 x 2.5, 21 x 2.5, 22 x 2.5, 18 x 3.5, 20 x 3.5, 22 x
          3.5, 23.5 x 3.5, 25 x 3.5, 26.5 x 3.5, 28 x 3.5, 30 x 3.5,
          31 x 3.5, 33 x 3.5, 34.5 x 3.5, 36 x 3.5, 38 x 3.5, 41 x
          3.5, 44 x 3.5, 47 x 3.5, 50 x 3.5mm


E.2.24.17 Grinding wheel, straight                                                                10
E.2.24.18 Grinding wheel, straight                                                                10




                                                                          32 of 46
                                             LOT E.1./E.2. WELDING AND SHEET METAL




                                                                        Hag     Halfait El   Souk El
  Item    Description                                     Kerari                                       Kht 1
                                                                       Yousif    Muluk        Mahali
E.2.24.19 Acid core soft solder assortment                                          10




                                                            33 of 46
                                                             Lot E.3. MACHINING




                                                                                                 Hag      Halfait Souk El
  Item    Description                                                                  Kerari                               Kht 1   Total Qty
                                                                                                Yousif   El Muluk Mahali
          MACHINING SECTION
 E.3.1    DRILLING, BENCH, 23 MM
E.3.1.1 Bench drilling machine, 23 mm: Spindle MT 2 - Throat 152 mm -                                                2                  2
        Speed range 500-2500 rpm - No. of speeds 5 - Table size 235x220
        mm
        INCLUDING:                                                                                                                      0
E.3.1.2 Drill chuck, 16 mm                                                                                           2                  2
        - precision quick-action draw-in collet chuck
        · Concentricity accuracy less than 0.06 mm
        - Capacity: 0 - 16 mm
        - Collet: B16
E.3.1.3 Machine vice, 100 mm, Smooth running with exact jaw guiding, also at                                         2                  2
          high axial load - Spindle with rolled trapezoid thread for smooth
          running - Multiple possibilities for assembly on the drilling table due to
          oblong holes - Technical Data: Jaw width: 100 mm - Span: 90 mm -
          Jaw height: 28 mm
E.3.1.4 Twist drill set, 1 to 13 mm: 25 pcs; 1 - 13 mm - Metal box                                                   2                  2
E.3.1.5 Safety goggles, clear lenses                                                                                 2                  2
        BSEN166/B - Clear polycarbonate safety lens with direct ventilation in
        goggle frame.
 E.3.2 DRILLING, PEDESTAL, 30 MM                                                                                                        0
E.3.2.1 Pillar drilling machine, 30 mm: . Spindle MT 4 - Throat 254 mm -                                             2                  2
        Speed range 120-1810 rpm - No. of speeds 9 - Table size 475x425
        mm
        INCLUDING:                                                                                                                      0
E.3.2.2 Drill chuck, 16 mm: - precision quick-action draw-in collet chuck ·                                          2                  2
        Concentricity accuracy less than 0.06 mm - Capacity: 0 - 16 mm -
        Collet: B16
E.3.2.3 Machine vice, 125 mm: Smooth running with exact jaw guiding, also at                                         2                  2
        high axial load - Spindle with rolled trapezoid thread for smooth
        running - Multiple possibilities for assembly on the drilling table due to
        oblong holes - Technical data: - Jaw width: 125 mm - Span: 110 mm -
        Jaw height: 30 mm
E.3.2.4 Twist drill set, 1 to 13 mm: · 25 pcs; 1 - 13 mm · Metal box                                                 2                  2
E.3.2.5 Twist drill set, 14 to 30 mm: · 9 pcs; 14.5/16/18/20/22/24/26/28/30 mm                                       2                  2
          · Wooden box · High service life · Good removal of chips · Right-hand
          cutting
E.3.2.6 Ejecting drift set                                                                                           2                  2
E.3.2.7 Machine clamp set, 52 pcs: Handy wall unit · Metric thread · 24 pcs                                          2                  2
          draw-in bolts · 6 pcs T-slot nuts · 6 pcs nuts · 4 pcs coupling nuts · 6
          pcs step blocks· 12 pcs step clamps · T-slot nuts (size 18 mm) draw
          bar thread M 16
E.3.2.8 Reduction sleeve set, morse taper MT4-2 + MT4-3                                                              2                  2
E.3.2.9 Adjustable wrench set, 3 pcs, 20 mm, 25 mm, 34 mm: Hardened and                                              2                  2
          heat treated steel with satin chrome finish. Fully polished, offset jaws.
          Slim raised lip style handle with hanging hole. Length: 150, 200, 250
          mm Capacity: 20, 25, 34 mm
E.3.2.10 Oil can, 0.5 L: Metal can with flexible spout and thumb operated lever                                      2                  2
         action. Capacity: 500 ml
E.3.2.11 Safety goggles, clear lenses: BSEN166/B - Clear polycarbonate safety                                        2                  2
         lens with direct ventilation in goggle frame.
E.3.2.12 Small storage cabinet, 2 shelves, 1 drawer                                                                  2                  2
 E.3.3 SURFACE GRINDING                                                                                                                 0
E.3.3.1 Horizontal surface grinding machine: Working surface of table                                                1                  1
         200x500 mm - X axis hydraulic traverse - Y/Z axis are manual -
         Grinding wheel 205 mm dia. - Spindle speed 3000 rpm - Distance
         from table surface to spindle center 415 mm - Spindle motor 2HP - CE
         standard. Complete with: Grinding wheel with flange - Wheel extractor
         - Wheel wrench - Balancing arbor - Auto lube system - Tool box -
         Leveling screws with blocks
          INCLUDING:                                                                                                                    0
E.3.3.2   Electro magnetic chuck + commutator                                                                        1                  1
E.3.3.3   Coolant system with dust collector                                                                         1                  1
E.3.3.4   Balancing stand                                                                                            1                  1
E.3.3.5   Halogen lamp                                                                                               1                  1
E.3.3.6   Parallel dresser                                                                                           1                  1
E.3.3.7   Grinding wheel, straight                                                                                   1                  1
E.3.3.8   Dial indicator, 0-100 mm: Robust design suited to workshop use and                                         1                  1
          calibration purposes • Housing machined from solid brass, satin
          chrome finish • Stem and spindle stainless steel, hardened and lapped
          • Adjustable tolerance fingers • Scale is turnable by outside - ring, for
          simply zero - setting
E.3.3.9 Magnetic base for dial gauge, M10: The thread is eccentrical placed,                                         1                  1
          for protection the magnet coil against smut • Sturdy magnetic block ,
          On/Off - switch made of aluminium, prismatic base and with a flat
          ground fac e backwards • Hammer blow blue lacquered magnetic
          block
E.3.3.10 Universal bevel protractor, 300 mm: Top Quality, suitable for                                               1                  1
          calibration purpose • Stainless, hardened and fine ground • Scales
          satin chrome finish • Parallaxfree vernier reading, with large
          magnifying lens • With fine adjustment
E.3.3.11 Engineers precision square, flat, 150x100 mm: Suitable for inspection                                       1                  1
          rooms and test laboratories • Stainless steel or made from special
          carbon steel • Extra fine ground pattern • Flat or with back




                                                                     34 of 46
                                                            Lot E.3. MACHINING




                                                                                                 Hag      Halfait Souk El
  Item     Description                                                                 Kerari                               Kht 1   Total Qty
                                                                                                Yousif   El Muluk Mahali
E.3.3.12 Steel rule, 300 mm/12" : High quality steel rules permanently marked                                        1                  1
         in Metric and Imperial graduations. Includes hanging hole. Length: 300
         mm
E.3.3.13 Bench brush, 280x70 mm                                                                                      1                  1
E.3.3.14 Soft hammer, 790 g: Coated die-cast head and handle of aluminium                                            1                  1
         alloy with absorbent rubber grip. Fitted with two screw-in durable nylon
         faces. Head partially filled with steel shot for controlled blows.
         Replacement faces available with alternative hardness. Weight: 790 g

E.3.3.15 Sharpening stone, 200x50x25 mm                                                                              1                  1
E.3.3.16 Safety goggles, clear lenses                                                                                1                  1
           BSEN166/B - Clear polycarbonate safety lens with direct ventilation in
           goggle frame.
 E.3.4     LATHE, MEDIUM                                                                                                                0
E.3.4.1    Centre lathe, 360x1000 mm: Centre height 180 mm - Distance                                                3                  3
           between centres 1000 mm - Swing over bed 360 mm - Spindle nose
           D1-4 - Spindle bore 40 mm - Range of speeds 82-2000 rpm - No. of
           speeds 9 - Complete with: Gap bed - Fixed centres - Centre sleeves
           - Coolant equipment - Foot operated brake - 4-way tool post - Rear
           splash guard - Follow rest, 3-jaw chuck.
           INCLUDING:                                                                                                                   0
E.3.4.2    4-jaw chuck, 200 mm                                                                                       3                  3
E.3.4.3    Collet chuck, 20 mm                                                                                       3                  3
E.3.4.4    Collets set, 3 to 20 mm                                                                                   3                  3
E.3.4.5    Drill chuck, 13 mm                                                                                        3                  3
E.3.4.6    Bedstop, single type                                                                                      3                  3
E.3.4.7    Rotating centre                                                                                           3                  3
E.3.4.8    Stationary steady                                                                                         3                  3
E.3.4.9    Set of cutting tools                                                                                      3                  3
E.3.4.10   Square toolbit assortment                                                                                 3                  3
E.3.4.11   Centre drill, 6 mm                                                                                        3                  3
E.3.4.12   Twist drill set, 1 to 13 mm: 25 pcs; 1 - 13 mm - Metal box                                                3                  3
E.3.4.13   Steel rule, 300 mm/12" : High quality steel rules permanently marked                                      3                  3
           in Metric and Imperial graduations. Includes hanging hole. Length: 300
           mm
E.3.4.14   Reduction sleeve set, morse taper MT 3-2                                                                  3                  3
E.3.4.15   Ejecting drift set                                                                                        3                  3
E.3.4.16   Sharpening stone, 200x50x25 mm                                                                            3                  3
E.3.4.17   Flat mill file, bastard, 250 mm, 12 pcs: Manufactured in accordance                                       3                  3
           with BS498:1990. Carbon chrome steel hardened and tempered with
           rust preventative finish and dipped in rust preventative oil.

E.3.4.18 Bench brush, 280x70 mm                                                                                      3                  3
 E.3.5 LATHE, LARGE
E.3.5.1 Centre lathe, 460x1500 mm: Centre height 230 mm - Distance                                                   2                  2
           between centres 1500 mm - Swing over bed 460 mm - Spindle nose
           D1-6 - Spindle bore 58 mm - Range of speeds 32-2000 rpm - No. of
           speeds 12 - Complete with: gap bed - fixed centres - centre sleeves -
           coolant equipment - foot operated brake - 4-way tool post - rear splash
           guard - follow rest - 3-jaw chuck.
           INCLUDING:                                                                                                                   0
E.3.5.2 4-jaw chuck, 315 mm: With cylindrical centering according to DIN                                             2                  2
           6350 · Incl. key for chucks - Concentricity precision less than 0.05 mm -
            Lathe chuck flange required · Without assembly
E.3.5.3    Collet chuck, 25 mm: With short taper holding fixture                                                     2                  2
E.3.5.4    Collets set, 3 to 25 mm: For universal collet chuck attachment - 17                                       2                  2
           pcs; clamping range ø 3 - 25 mm - Wooden box
E.3.5.5    Drill chuck, 13 mm: precision quick-action draw-in collet chuck -                                         2                  2
           Concentricity accuracy less than 0.06 mm - Capacity: 0 - 13 mm -
           Collet: B16
E.3.5.6    Bedstop, single type                                                                                      2                  2
E.3.5.7    Rotating centre                                                                                           2                  2
E.3.5.8    Stationary steady                                                                                         2                  2
E.3.5.9    Set of cutting tools                                                                                      2                  2
E.3.5.10   Square toolbit assortment                                                                                 2                  2
E.3.5.11   Centre drill, set 6 + 8 mm                                                                                2                  2
E.3.5.12   Twist drill set, 1 to 13 mm: 25 pcs; 1 - 13 mm - Metal box                                                2                  2
E.3.5.13   Steel rule, 300 mm/12" : High quality steel rules permanently marked                                      2                  2
           in Metric and Imperial graduations. Includes hanging hole. Length: 300
           mm
E.3.5.14   Reduction sleeve set, morse taper MT 3-2                                                                  2                  2
E.3.5.15   Ejecting drift set                                                                                        2                  2
E.3.5.16   Sharpening stone, 200x50x25 mm                                                                            2                  2
E.3.5.17   Flat mill file, bastard, 250 mm, 12 pcs: Manufactured in accordance                                       2                  2
           with BS498:1990 . Carbon chrome steel hardened and tempered with
           rust preventative finish and dipped in rust preventative oil.

E.3.5.18 Bench brush, 280x70 mm                                                                                      2                  2
 E.3.6 MILLING, UNIVERSAL                                                                                                               0
E.3.6.1 Universal milling machine: Table size 300x1200 mm - X,Y,Z axis                                               1                  1
           travel 700x260x420 mm - Spindle taper ISO 40 - Two speed motor, 12
           speeds - Range of speeds 67 - 1835 rpm - Auto feed on X and Y axis -
           CE standard - Complete with: - Coolant system - . Cutter sleeve -
           Drawbar - Ttool box - Vertical head - Worklamp - Splash guard - Chip
           tray
           INCLUDING:                                                                                                                   0




                                                                    35 of 46
                                                            Lot E.3. MACHINING




                                                                                               Hag      Halfait Souk El
 Item      Description                                                               Kerari                               Kht 1   Total Qty
                                                                                              Yousif   El Muluk Mahali
E.3.6.2    Milling vice 150 mm                                                                                     1                  1
E.3.6.3    Universal dividing head                                                                                 1                  1
E.3.6.4    Rotary table                                                                                            1                  1
E.3.6.5    Vertical milling attachment                                                                             1                  1
E.3.6.6    Milling arbor, short, ISO 40x16, 22, 27 mm                                                              1                  1
E.3.6.7    ISO 40 collet holder with chucks 3-20 mm                                                                1                  1
E.3.6.8    Set of milling cutters                                                                                  1                  1
E.3.6.9    Milling head : Diameter 100 mm - supplied with inserts                                                  1                  1
E.3.6.10   End milling cutters sizes 3-20 mm: 10 milling cutters DIN 327 D · short                                 1                  1
           type - Model with 2 cutting edges. - DIN 1835 B.
           (3/4/5/6/8/10/12/14/18/20 mm) and 10 milling cutters DIN 844 B · short
           type - Model with 4 cutting edges.· DIN 1835 B.
           3/4/5/6/8/10/12/14/18/20 mm)
E.3.6.11 Depth gauge micrometer set, 0-150 mm: High standard quality, for                                          1                  1
           calibration purposes • Drum and sleeve satin chrome finish •
           Measuring face and rods hardened and finely ground • Measuring rods
           flat ground and finely lapped • Locking screw for quick and precise
           fixing • With friction thimble for constant measuring pressure.

E.3.6.12 Vernier depth gauge, 0-250 mm: • Stainless steel, hardened, vernier                                       1                  1
        and scale satin chrome finish • With locking screw • Measuring
        surface fine ground • Mono - block vernier
 E.3.7 MILLING, HORIZONTAL                                                                                                            0
E.3.7.1 Horizontal milling machine: Table size 300x1200 mm - X,Y,Z axis                                            1                  1
        travel 700x260x420 mm - Spindle taper ISO 40 - Two speed motor, 12
        speeds - Range of speeds 67 - 1835 rpm - Auto feed on X and Y axis -
        CE standard - Complete with: Coolant system - . Cutter sleeve,
        Drawbar, Tool box, Worklamp, Splash guard, Chip tray.

           INCLUDING:                                                                                                                 0
E.3.7.2    Machine vice                                                                                            1                  1
E.3.7.3    Universal dividing head                                                                                 1                  1
E.3.7.4    Rotary table                                                                                            1                  1
E.3.7.5    Milling arbor, long, 16, 22, 27, 32 mm                                                                  1                  1
E.3.7.6    ISO 40 collet holder with chucks 3-20 mm                                                                1                  1
E.3.7.7    Set of milling cutters                                                                                  1                  1
E.3.7.8    Depth gauge micrometer set, 0-150 mm: High standard quality, for                                        1                  1
           calibration purposes • Drum and sleeve satin chrome finish •
           Measuring face and rods hardened and finely ground • Measuring rods
           flat ground and finely lapped • Locking screw for quick and precise
           fixing • With friction thimble for constant measuring pressure


E.3.7.9 Vernier depth gauge, 0-250 mm: • Stainless steel, hardened, vernier                                        1                  1
        and scale satin chrome finish • With locking screw • Measuring
        surface fine ground • Mono - block vernier
 E.3.8 MILLING, VERTICAL                                                                                                              0
E.3.8.1 Vertical milling machine: Table size 228x1067 mm - Longitudinal                                            1                  1
        travel 762 mm. - Cross travel 305 mm - Vertical travel 406 mm -
        Distance from spindle nose to table top 0-440 mm - Spindle taper ISO
        30 - CE standard - Complete with: Toolbox, One shot lubrication, .
        Arbor draw bar, Chip covers front and rear, Hardened and ground x, y,
        z axis + table, Coolant pump, splash guard.

           INCLUDING:                                                                                                                 0
E.3.8.2    Power feed unit X-axis                                                                                  1                  1
E.3.8.3    Power feed unit Y-axis                                                                                  1                  1
E.3.8.4    Machine vice, 150 mm                                                                                    1                  1
E.3.8.5    Universal dividing head                                                                                 1                  1
E.3.8.6    Rotary table 150 mm                                                                                     1                  1
E.3.8.7    Milling arbor, short, 16, 22, 27, 32 mm                                                                 1                  1
E.3.8.8    ISO 40 collet holder with chucks 3-20 mm                                                                1                  1
E.3.8.9    Set of milling cutters                                                                                  1                  1
E.3.8.10   Milling head : - Diameter 100 mm - supplied with inserts.                                               1                  1
E.3.8.11   End milling cutters sizes 3-20 mm: 10 milling cutters DIN 327 D · short                                 1                  1
           type - Model with 2 cutting edges. -· DIN 1835 B.
           (3/4/5/6/8/10/12/14/18/20 mm) and 10 milling cutters DIN 844 B · short
           type · Model with 4 cutting edges. · DIN 1835 B.
           3/4/5/6/8/10/12/14/18/20 mm)
E.3.8.12 Depth gauge micrometer set, 0-150 mm: High standard quality, for                                          1                  1
           calibration purposes; • Drum and sleeve satin chrome finish •
           Measuring face and rods hardened and finely ground • Measuring rods
           flat ground and finely lapped • Locking screw for quick and precise
           fixing • With friction thimble for constant measuring pressure


E.3.8.13 Vernier depth gauge, 0-250 mm: • Stainless steel, hardened, vernier                                       1                  1
           and scale satin chrome finish • With locking screw • Measuring
           surface fine ground • Mono - block vernier
 E.3.9     GRINDER, PEDESTAL, 200 MM                                                                                                  0
E.3.9.1    Pedestal grinder , 200 mm: Voltage 220-240V/1Ph/50-60Hz - Power                                         2                  2
           900 W - Speed 2800 rpm - Grinding wheel 200x25x20 mm - Grit 36/80
           - Weight 24 kg
           INCLUDING:                                                                                                                 0
E.3.9.2    Pedestal                                                                                                2                  2
E.3.9.3    Grinding wheel, 200x25x20 mm, grit 36                                                                   2                  2
E.3.9.4    Grinding wheel, 200x25x20 mm, grit 80                                                                   2                  2




                                                                   36 of 46
                                                             Lot E.3. MACHINING




                                                                                                 Hag      Halfait Souk El
  Item     Description                                                                 Kerari                               Kht 1   Total Qty
                                                                                                Yousif   El Muluk Mahali
 E.3.9.5 Grinding wheel dresser, 150 mm: Aluminium alloy body with four star                                         2                  2
           wheels. Suitable for cleaning, sharpening and trueing grinding wheel
           surfaces. Suitable for use with any grinder. Length: 150 mm

 E.3.10 GRINDER, PEDESTAL, 300 MM                                                                                                       0
E.3.10.1 Pedestal grinder , 300 mm: Voltage 380-415V/3Ph/50-60 Hz - Power                                            2                  2
           1300 W - Speed 1700 rpm - Grinding wheel 300x40x25 mm - Grit
           36/60 - Weight 60 kg
           INCLUDING:                                                                                                                   0
E.3.10.2   Pedestal                                                                                                  2                  2
E.3.10.3   Grinding wheel, 300x40x25 mm, grit 36                                                                     2                  2
E.3.10.4   Grinding wheel, 300x40x25 mm, grit 60                                                                     2                  2
E.3.10.5   Grinding wheel dresser, 150 mm: Aluminium alloy body with four star                                       2                  2
           wheels. Suitable for cleaning, sharpening and trueing grinding wheel
           surfaces. Suitable for use with any grinder. Length: 150 mm

E.3.10.6 Safety goggles, clear lenses BSEN166/B - Clear polycarbonate safety                                         2                  2
           lens with direct ventilation in goggle frame.

 E.3.11 TOOL GRINDING                                                                                                                   0
E.3.11.1 Tool and cutter grinding machine: Distance between center 380 mm -                                          1                  1
           Table area 675x110 mm - Longitudinal travel of table 305 mm - Swing
           over table 280 mm - Cross travel of saddle 150 mm - Rpm of grinding
           wheel 2850 - CE standard - Complete with:
           . Cup wheel, Tool bit grinding attachment, Face mill holder, Cutter
           arbor 1", Tooth rest, Center MT 3, Adjusting tools, Coolant system,
           Floor stand, work lamp.
           INCLUDING:                                                                                                                   0
E.3.11.2 Workhead NT 50 taper                                                                                        1                  1
E.3.11.3 Collet chuck with holder and collets                                                                        1                  1
E.3.11.4 Radius grinding attachment                                                                                  1                  1
E.3.11.5 End mill grinding attachment                                                                                1                  1
E.3.11.6 Drill point and tap lead attachement                                                                        1                  1
E.3.11.7 Swivel vice                                                                                                 1                  1
E.3.11.8 Grinding wheel dresser                                                                                      1                  1
E.3.11.9 Various tooth rests                                                                                         1                  1
E.3.11.10 Mandrils for side and face cutters, set                                                                    1                  1
E.3.11.11 Morse taper holders                                                                                        1                  1
E.3.11.12 Taper mandrils                                                                                             1                  1
E.3.11.13 Grinding wheel, flaring cup                                                                                1                  1
E.3.11.14 Grinding wheel,                                                                                            1                  1
E.3.11.15 Dial indicator, 0-100 mm: Robust design suited to workshop use and                                         1                  1
           calibration purposes • Housing machined from solid brass, satin
           chrome finish • Stem and spindle stainless steel, hardened and lapped
           • Adjustable tolerance fingers • Scale is turnable by outside - ring, for
           simply zero - setting
E.3.11.16 Dial test gauge, 0-50-0 mm: Standard - Quality, especially for                                             1                  1
           workshop use • Metall housing, satin chrome finish • Stem and spindle
           stainless steel, hardened • Adjustable tolerance fingers • Scale is
           turnable by outside - ring, for simply zero - setting
E.3.11.17 Magnetic base for dial gauge, M10: The thread is eccentrical placed,                                       1                  1
           for protection the magnet coil against smut • Sturdy magnetic block ,
           On/Off - switch made of aluminium, prismatic base and with a flat
           ground fac e backwards • Hammer blow blue lacquered magnetic
           block
E.3.11.18 Universal bevel protractor, 300 mm                                                                         1                  1
           Top Quality, suitable for calibration purpose
           • Stainless, hardened and fine ground
           • Scales satin chrome finish
           • Parallaxfree vernier reading, with large magnifying lens
           • With fine adjustment
E.3.11.19 Engineers precision square, flat, 150x100 mm: Suitable for inspection                                      1                  1
           rooms and test laboratories • Stainless steel or made from special
           carbon steel • Extra fine ground pattern • Flat or with back

E.3.11.20 Steel rule, 300 mm/12" : High quality steel rules permanently marked                                       1                  1
          in Metric and Imperial graduations. Includes hanging hole. Length: 300
          mm
E.3.11.21 Bench brush, 280x70 mm                                                                                     1                  1
E.3.11.22 Soft hammer, 790 g: Coated die-cast head and handle of aluminium                                           1                  1
          alloy with absorbent rubber grip. Fitted with two screw-in durable nylon
          faces. Head partially filled with steel shot for controlled blows.
          Replacement faces available with alternative hardness.
          Weight: 790 g


E.3.11.23 Sharpening stone, 200x50x25 mm                                                                             1                  1
 E.3.12 FURNACE                                                                                                                         0




                                                                     37 of 46
                                                            Lot E.3. MACHINING




                                                                                                Hag      Halfait Souk El
 Item      Description                                                                Kerari                               Kht 1   Total Qty
                                                                                               Yousif   El Muluk Mahali
E.3.12.1 Multi purpose furnace: Inside dimensions (mm) 230 wide x 240 deep x                                        1                  1
           170 high: Max. furnace temp. 1100 °C - Power rating: 3.0 kW -
           Connecting voltage 230V 1/N - Stainless steel casing / Corrosion
           resistant - High grade insulation, asbestos free /> Low energy
           consumption, low operating costs - High quality heating wire (Kanthal
           A1), embedded in ceramic plates - Long service life - Observation hole
           in the door - Exhaust Pipe in the rear wall - Control Panel incl.
           Program Controller HT 40 AL - Simple, sraightforward operation.
           Automatic start of the furnace programmable - Programmable heating
           up ramp - Programmable soaking time - Control accuracy +/- 2.
           Complete with: 1 pair of glass fibre gloves, lenght 400 mm, The
           gloves can be held for a short time at temperature of ca. 900 °C - 1
           pcs face shield, heat resistant, lightweight.


E.3.12.2 Face shield : BSEN166 - Ratchet adjustable headband with brushed                                           6                  6
           nylon comfort band. Competitive quality for automotive, agricultural
           and industrial applications. Type: Brow Guard and Face Shield -
           Replacement Visor: Model No: SSP11E/R - Type: Clear

E.3.12.3 Gas pliers: Made from Titacrom Steel. PVC insulated handles -                                              1                  1
           Length: 200 mm - Capacity: 31 mm
E.3.12.4 Blacksmiths tongs                                                                                          1                  1
 E.3.13 HARDNESS TESTING                                                                                                               0
           Hardness tester: Automatic load selection - Automatic zero setting dial                                  1                  1
           gauge - Maximum test height 230 mm - Approximate weight including
           table 90 kg - Depth of throat 133 mm - Delivery incl. table and
           accessories in wooden case -. The machine is equipped with an
           integrated water-level - Complete with metal stand and all required
           accessories
 E.3.14 ARBOR PRESS                                                                                                                    0
        Arbor press, 3 ton: Max workpiece height 310 mm - Throat 160 mm -                                           2                  2
        Ram 40x40 mm
 E.3.15 POWER HACKSAW                                                                                                                  0
        Power hacksaw: Cutting capacity round 225mm - Cutting capacity                                              1                  1
        square 230 x 220mm - Max cutting degree 45°/120 - Distance of
        strokes 140mm - Blade size 400 x 32 x 1.6 x 8.3 - Main motor 2HP
        (1.5kw) - Standard Accessories -. Complete hydraulic system :
        Infinitely variable saw feed pressure control. Complete electric
        components with motor protect - Recirculating coolant system -
        Adjustable material length stop - Clamping device for short ends -
        Equalixing bar for jaws - Nesting fixture for multiple sawing of stacked
        bars, small rounds and tubing. Material support stands - Saw blade
        ready for cutting - Set of necessary tools and tool box - Grease gun. -
        Instruction and parts manual.
        INCLUDING:                                                                                                                     0
        Hacksaw blade, power use, 6 tpi                                                                                                0
 E.3.16 BANDSAW, HORIZONTAL                                                                                                            0
        Horizontal bandsaw: Swivel head and variable speed - Blade speed                                            1                  1
        25-75 m/min - Blade size 27x0,9x3300 mm - Sawing capacity 250 mm
        dia. - CE standard - Complete saw blade and coolant equipement

         INCLUDING:                                                                                                                    0
         Bandsaw blades                                                                                             1                  1
 E.3.17 BANDSAW, VERTICAL                                                                                                              0
E.3.17.1 Vertical bandsaw: Blade to colum 520 mm - Max. working height 310                                          1                  1
         mm - Table 600x500mm - Rpm 20-80 m/min + 120-500 m/min - Blade
         length 3880 mm - Blade width 3-16 mm - CE standard - Complete
         with: Saw blade butt welder, Blade shear/grinder, Low voltage work
         lamp, Set of tools, Built-in blade and tyre cleaning brush

           INCLUDING:                                                                                                                  0
E.3.17.2   Bandsaw blades                                                                                           1                  1
E.3.17.3   Grooved table                                                                                            1                  1
E.3.17.4   Rip fence                                                                                                1                  1
E.3.17.5   Material roller stand: Trouble-free and efficient material transport for                                 1                  1
           the feed and removal of workpieces - Universally applicable for e.g.
           metal belt saws, circular saws etc.- Roller support continuously height-
           adjustable and clampable - Safe workpiece rest with solid and highly
           stressable steel rolls - Stable construction made of special profiles -
           Option to assemble the length measuring systems LMS - Technical
           data: Diameter of support rollers: 60 mm - Width of support rollers:
           360 mm - Maximum load: 360 kg - Length materials stand: 1000 mm -
           Height materials stand: 650 - 950 mm


E.3.17.6   Mitre protractor                                                                                         1                  1
E.3.17.7   Bench brush, 280x70 mm                                                                                   1                  1
 E.3.18    CIRCULAR CUT-OFF SAWING MACHINE                                                                                             0
E.3.18.1   Circular cut-off sawing machine 315 mm: Sawblade diameter 315 mm                                         2                  2
           - Speed 40/80 rpm - Max. sawing capacity solid material 50 mm, -
           Max. sawing capacity round tube 90 mm - CE standard - Complete
           with: Machine stand, saw blade, coolant fluid
           INCLUDING:                                                                                                                  0




                                                                    38 of 46
                                                             Lot E.3. MACHINING




                                                                                                Hag      Halfait Souk El
  Item    Description                                                                 Kerari                               Kht 1   Total Qty
                                                                                               Yousif   El Muluk Mahali
E.3.18.2 Material roller stand: Trouble-free and efficient material transport for                                   2                  2
          the feed and removal of workpieces - Universally applicable for e.g.
          metal belt saws, circular saws etc. - Roller support continuously height-
          adjustable and clampable - Safe workpiece rest with solid and highly
          stressable steel rolls - Stable construction made of special profiles -
          Option to assemble the length measuring systems LMS - Technical
          data: Diameter of support rollers: 60 mm - Width of support rollers:
          360 mm - Maximum load: 360 kg - Length materials stand: 1000 mm -
          Height materials stand: 650 - 950 mm


E.3.18.3 Circular saws                                                                                              2                  2
         - Size : 315 x 2,5 x 40 mm Z6
 E.3.19 BENCH SHEAR                                                                                                                    0
   1     Bench profile shear: Steel plate 10 mm - Square 20x20 mm - Strip                                           2                  2
         90x14 mm - Round 22 mm - L/T steel 60x7 mm - Length of knives 170
         mm
         MARKING AND MEASURING                                                                                                         0
 E.3.20 MARKING OUT                                                                                                                    0
E.3.20.1 Surface plate, 800x500x100 mm: • Particularly well selected material                                       2                  2
         of highest quality • Entirely faultless • Diamond - lapped measuring
         surfaces, acc. to DIN 876 • Extreme hard and wear - resistant, acid -
         resistant • T-Slots acc. to DIN 650, made of steel, against extra charge
         • Delivery incl. workshop calibration - certificate • Include plates made
         of black granite
E.3.20.2 Vernier height gauge, 300 mm: Suitable for workshop use • Beam                                             2                  2
          made from special steel, chromed • Measuring scale and vernier in
          satin chrome finish • With fine adjustment • Tungsten carbide tipped
          drawing point, interchangeable • With holder for dial indicator • At „0“-
          position the drawing point coincides exactly with the base • Base made
          of cast iron, lacquered
E.3.20.3 Angle plates with clamping slots: • Made of special cast iron with high                                    2                  2
          resistance to wear A • Accuracy of measuring surfaces according to
          DIN 876 • Accuracy of angle according to DIN 875 • Side areas
          carefully milled
E.3.20.4 V-block set, 2 pcs, 150x50x40 mm : • Made of dense special cast iron                                       2                  2
         with high resistance to wear • Supplied in matched pair • 1 large
         groove, 90° • Available in milled or ground pattern
 E.3.21 MEASURING AND TESTING                                                                                                          0
E.3.21.1 External micrometer, 0-25 mm: For standard expectations • Drum and                                        20                 20
         sleeve satin chrome finish • Chromed frame • Tungsten carbide
         measuring faces • Insulation plates • Locking lever for quick and
         precise fixing • With ratchet for constant measuring pressure• Delivery
         with setting key, from up 25 mm with setting gauge

E.3.21.2 External micrometer, 25-50 mm: For standard expectations • Drum                                           24                 24
          and sleeve satin chrome finish • Chromed frame • Tungsten carbide
          measuring faces • Insulation plates • Locking lever for quick and
          precise fixing • With ratchet for constant measuring pressure •
          Delivery with setting key, from up 25 mm with setting gauge

E.3.21.3 External micrometer, 75-100 mm; For standard expectations: • Drum                                         24                 24
          and sleeve satin chrome finish • Chromed frame • Tungsten carbide
          measuring faces • Insulation plates • Locking lever for quick and
          precise fixing • With ratchet for constant measuring pressure •
          Delivery with setting key, from up 25 mm with setting gauge

E.3.21.4 External micrometer, 50-75 mm; For standard expectations: • Drum                                          24                 24
          and sleeve satin chrome finish • Chromed frame • Tungsten carbide
          measuring faces • Insulation plates • Locking lever for quick and
          precise fixing • With ratchet for constant measuring pressure •
          Delivery with setting key, from up 25 mm with setting gauge


E.3.21.5 External micrometer set, 4 pcs, 100-200 mm; For standard                                                  24                 24
          expectations: • Drum and sleeve satin chrome finish • Chromed frame
           • Tungsten carbide measuring faces • Insulation plates • Locking lever
          for quick and precise fixing • With ratchet for constant measuring
          pressure • Delivery with setting key, from up 25 mm with setting gauge


E.3.21.6 Internal micrometer 5-30 mm; For standard expectations: • Drum and                                        24                 24
          sleeve satin chrome finish • Tungsten carbide measuring faces,
          cylindrical and ground • Locking screw for quick and precise fixing •
          With ratchet for constant measuring pressure • With setting key

E.3.21.7 Internal micrometer 25-50 m; For standard expectations: • Drum and                                        24                 24
          sleeve satin chrome finish • Tungsten carbide measuring faces,
          cylindrical and ground • Locking screw for quick and precise fixing •
          With ratchet for constant measuring pressure • With setting key

E.3.21.8 Internal micrometer, 50-75 mm; For standard expectations: • Drum                                          24                 24
          and sleeve satin chrome finish • Tungsten carbide measuring faces,
          cylindrical and ground • Locking screw for quick and precise fixing •
          With ratchet for constant measuring pressure • With setting key

E.3.21.9 Internal micrometer, 75-100 mm; For standard expectations: • Drum                                         24                 24
          and sleeve satin chrome finish • Tungsten carbide measuring faces,
          cylindrical and ground • Locking screw for quick and precise fixing •
          With ratchet for constant measuring pressure • With setting key




                                                                    39 of 46
                                                             Lot E.3. MACHINING




                                                                                                 Hag      Halfait Souk El
  Item     Description                                                                 Kerari                               Kht 1   Total Qty
                                                                                                Yousif   El Muluk Mahali
E.3.21.10 Depth gauge micrometer 0-75 mm: High standard quality, for                                                12                 12
           calibration purposes • Drum and sleeve satin chrome finish •
           Measuring face and rods hardened and finely ground • Measuring
           rods flat ground and finely lapped • Locking screw for quick and
           precise fixing • With friction thimble for constant measuring pressure


E.3.21.11 Depth gauge micrometer 0-150 mm: High standard quality, for                                               12                 12
           calibration purposes • Drum and sleeve satin chrome finish •
           Measuring face and rods hardened and finely ground • Measuring rods
           flat ground and finely lapped • Locking screw for quick and precise
           fixing • With friction thimble for constant measuring pressure


E.3.21.12 Depth gauge micrometer set, 0-150 mm: High standard quality, for                                           6                  6
           calibration purposes • Drum and sleeve satin chrome finish •
           Measuring face and rods hardened and finely ground • Measuring rods
           flat ground and finely lapped • Locking screw for quick and precise
           fixing • With friction thimble for constant measuring pressure


E.3.21.13 Vernier caliper, with fixing screw, 0-150 mm: Suitable for craftsmen                                      24                 24
           and educational est. • Stainless steel, hardened • Scale and vernier
           satin chrome finish • Jaws fine ground • Mono-block vernier • 4-way
           measuring system • Flat depth gauge
E.3.21.14 Vernier caliper, with fixing screw, 0-300 mm: Precision pattern • Made                                    24                 24
           of stainless steel, hardened • Scale and vernier satin chrome finish •
           Jaws fine ground • With knife-points and with / without fine adjustment
           • Mono - block vernier • Offset jaws for inside measurements 20 0633
           • With Identification - Number • Up to 1000 mm we deliver incl.
           wooden box
E.3.21.15 Gear tooth vernier calliper: Stainless Steel - Manufacturers Standard -                                   12                 12
          Locking screw - With fine adjustment - Satin chromed - Hardened jaw
          type, Range 1 - 15 mm, Reading 0,02 mm
E.3.21.16 Vernier depth gauge, 0-250 mm: • Stainless steel, hardened, vernier                                       24                 24
          and scale satin chrome finish • With locking screw • Measuring
          surface fine ground • Mono - block vernier
E.3.21.17 Vernier height gauge, 300 mm: Suitable for workshop use • Beam                                            12                 12
          made from special steel, chromed • Measuring scale and vernier in
          satin chrome finish • With fine adjustment • Tungsten carbide tipped
          drawing point, interchangeable • With holder for dial indicator • At „0“-
          position the drawing point coincides exactly with the base • Base made
          of cast iron, lacquered
E.3.21.18 Universal surface gauge, 300 mm: For normal workshop use • Round                                          24                 24
          and chromed beam, without graduation • Hardened drawing point,
          straight and cranked • Drawing point is swivelling and rotating in all
          directions • With round cast iron base
E.3.21.19 Telescopic gauge set: Expert Quality, for measuring of bore diameter                                      24                 24
          and groove width. The spring-loaded plunger expands within the hole.
          Knurled locking screw allows plunger contacts to be held in position,
          removed and measured with a micrometer. Satin chrome finish.
          Supplied in PVC storage wallet with ranges marked. Ranges: • 8-
          13mm (5/16 - 1/2") Length: 115mm • 13-19mm (1/2 - 3/4") Length:
          115mm • 19-31mm (3/4 - 1.1/4") Length: 115mm • 31-54mm (1.1/4 -
          2.1/8") Length: 145mm • 54-89mm (2.1/8 - 3.1/2") Length: 145mm •
          89-150mm (3.1/2 - 6") Length: 145mm


E.3.21.20 Dial indicator, 0-100 mm: Robust design suited to workshop use and                                         6                  6
           calibration purposes • Housing machined from solid brass, satin
           chrome finish • Stem and spindle stainless steel, hardened and lapped
           • Adjustable tolerance fingers • Scale is turnable by outside - ring, for
           simply zero - setting
E.3.21.21 Dial test gauge, 0-50-0 mm: Standard - Quality, especially for                                            12                 12
           workshop use • Metall housing, satin chrome finish • Stem and spindle
           stainless steel, hardened • Adjustable tolerance fingers • Scale is
           turnable by outside - ring, for simply zero - setting
E.3.21.22 Measuring stand with serrated anvil: • Measuring table made of steel,                                     24                 24
           hardened and finely ground • Chromed column, rigid meas.-arm, with
           fine adjustment • Dial indicator shank ø 8 mm - Table size: 60 x 60
           mm - Measuring height: 125 mm
E.3.21.23 Magnetic base for dial gauge, M10: The thread is eccentrical placed,                                      24                 24
           for protection the magnet coil against smut • Sturdy magnetic block ,
           On/Off - switch made of aluminium, prismatic base and with a flat
           ground fac e backwards • Hammer blow blue lacquered magnetic
           block
E.3.21.24 Plug gauge set, go and no-go, M3-M12: Metric ISO - threads • Special                                       6                  6
           steel, hardened and ground • With “Go” and “No-Go” side, with “Go” or
           “No-Go” thread rings • Tolerance according to 6H and according to 6g

E.3.21.25 Ring gauge set, go, M3-M12: Metric ISO - threads • Special steel,                                          6                  6
           hardened and ground • With “Go” and “No-Go” side, with “Go” or “No-
           Go” thread rings • Tolerance according to 6H and according to 6g

E.3.21.26 Slip gauge set, 87 pcs, 1,001 to 100 mm: Workshop - quality •                                              6                  6
           Hardened and especially relieved special steel • High grade of
           abrasion resistance • Each gauge block is marked with an
           identification-Number
E.3.21.27 Universal bevel protractor, 300 mm: Top Quality, suitable for                                             12                 12
           calibration purpose • Stainless, hardened and fine ground • Scales
           satin chrome finish • Parallaxfree vernier reading, with large
           magnifying lens • With fine adjustment




                                                                     40 of 46
                                                                Lot E.3. MACHINING




                                                                                                     Hag      Halfait Souk El
  Item     Description                                                                     Kerari                               Kht 1   Total Qty
                                                                                                    Yousif   El Muluk Mahali
E.3.21.28 Engineers precision square, flat, 150x100 mm: Suitable for inspection                                         12                 12
           rooms and test laboratories • Stainless steel or made from special
           carbon steel • Extra fine ground pattern • Flat or with back

E.3.21.29 Straight edge, 1000 mm: · Flat sides and edges extra finely ground ·                                           6                  6
           Stainless or carbon steel quality available · Calibration-Certificate
           included · From up 2000 mm length I-form, with two slots

E.3.21.30 Surface plate, 400x400x60 mm: • Particularly well selected material of                                         6                  6
           highest quality • Entirely faultless • Diamond - lapped measuring
           surfaces, acc. to DIN 876 • Extreme hard and wear - resistant, acid -
           resistant • T-Slots acc. to DIN 650, made of steel, against extra
           charge • Delivery incl. workshop calibration - certificate

E.3.21.31 Steel rule, 300 mm/12" : High quality steel rules permanently marked                                          24                 24
          in Metric and Imperial graduations. Includes hanging hole. Length: 300
          mm
E.3.21.32 Inside calliper, 150 mm: • Steel, with hardened points • Flat legs,                                           24                 24
          polished • With rivet
E.3.21.33 Outside calliper, 150 mm: • Steel, with hardened points • Flat legs,                                          24                 24
          polished • With rivet
E.3.21.34 Divider, spring type, 150 mm: • Steel, with hardened points • Square                                          24                 24
          legs , chromed pattern • With quick adjusting spring nut and fine
          adjustment
E.3.21.35 Feeler gauge set, 0,05-1,00 mm / .002-.040 inch: For thickness                                                24                 24
          measuring between narrow slots and for automotive ind. • Blades
          made from hardened spring steel • Conical shaped blades, 100 mm
          length • Nickel plated case with lock nut • Sizes in mm and inch on
          each blade
E.3.21.36 Screw pitch gauge set metric, 0.4-70 mm, 20 blades: For internal and                                          24                 24
           external measurements • Fine cutted threads
E.3.21.37 Screw pitch gauge set, unc-unf, 4-42 tpi, 30 blades: For internal and                                         24                 24
         external measurements • Fine cutted threads
         TOOLING                                                                                                                            0
 E.3.22 TOOLS TURNING                                                                                                                       0
E.3.22.1 Boring bar, lathe . The VBH adjustable boring holder is suited for all                                         20                 20
         VB fixed boring tools. The level of the cutting edge is adjustable
         between 9mm and 21mm without unclamping the holder. To be used
         for boring tool VB3-VB14.
E.3.22.2 Boring bar head set                                                                                            20                 20
E.3.22.3 Parting-off toolholder: The SW parting-off tool/holder has been made                                           20                 20
           very rigid in order to reduce vibrations to a minimum. The SW tools
           are ground HIGHLY BICONICALLY, which ensure that materials which
           are difficult to be machined are cut off extremely well.

E.3.22.4 Turning toolholder set: 11 pcs · With soldered carbide reversing plates                                        20                 20
           · Wooden box
E.3.22.5   Knurling toolholder                                                                                          20                 20
E.3.22.6   Knurling wheel set                                                                                           20                 20
E.3.22.7   Thread-cutting toolholder                                                                                    20                 20
E.3.22.8   Thread cutting cutters                                                                                       20                 20
E.3.22.9   Turning toolholder set with inserts: 7 pcs · With carbide reversing                                          20                 20
           plates · TiN-coated · Wooden box ISO designation for tool holder ·
           Cutting tool 24: SCLCR1616K06 · Cutting tool 25: SSRCR1616H09 ·
           Cutting tool 26: SSRCR1616H09 · Cutting tool 27: SCGCR1616H09
           h1 =16 mm · Cutting tool 28: SCGCL1616H09 · Cutting tool 29:
           LW1616R04 · Cutting tool 30: QA1622R/L03


E.3.22.10 Carbide insert set                                                                                            20                 20
E.3.22.11 Parting-off blade                                                                                             20                 20
E.3.22.12 Square toolbit assortment                                                                                     20                 20
E.3.22.13 Combination centre drill set                                                                                  20                 20
E.3.22.14 Tool storage cabinet: - Size: 580x700x950 mm - With 4 castor wheels                                            2                  2
           and 5 drawers,
 E.3.23 TOOLS, DRILLING/REAMING/TAPPING                                                                                                     0
E.3.23.1 Twist drill set in steps of 0,5 mm, HSS DIN 338: High performance                                               6                  6
           twist drill suitable for all normal drilling in conventional materials. Point
           cut: helical point Helix angle: 20-30° Ø tolerance: h8 - Right-hand
           cutting - Consisting of 25 twist drills DIN 338 type N Ø 1,0 mm up to
           13,0 mm in increments of 0,5 mm.


E.3.23.2 d.o. sizes 8,0 to 10,0 mm 20 each: High performance twist drill                                                12                 12
           suitable for all normal drilling in conventional materials. Point cut:
           helical point Helix angle: 20-30° Ø tolerance: h8 - Right-hand cutting

E.3.23.3 d.o. sizes 10,5 to 13,0 mm 10 each: High performance twist drill                                               12                 12
           suitable for all normal drilling in conventional materials. Point cut:
           helical point Helix angle: 20-30° Ø tolerance: h8 - Right-hand cutting

E.3.23.4 Twist drill set, 13 to 30 mm, in steps of 1,0 mm,HSS DIN 345: High                                              6                  6
           performance twist drill suitable for all normal drilling in conventional
           materials. Point cut: helical point Helix angle: 20-30° Ø tolerance: h8 -
           Right-hand cutting
E.3.23.5   Parallel machine reamer set, HSS hand model 4 to 12 mm                                                       12                 12
E.3.23.6   Adjustable reamer set, 12 to 30 mm                                                                            4                  4
E.3.23.7   Morse taper reamer set MT1, MT2, MT3, MT4 hand model                                                          4                  4
E.3.23.8   Taper pin reamer set, hand model 4 to 12 mm                                                                   4                  4




                                                                        41 of 46
                                                              Lot E.3. MACHINING




                                                                                                  Hag      Halfait Souk El
  Item     Description                                                                  Kerari                               Kht 1   Total Qty
                                                                                                 Yousif   El Muluk Mahali
E.3.23.9 Countersink cutter set of 5 pcs range 6,3 to 25 mm: 5 Taper and                                             12                 12
           deburring countersinkers DIN 335 type C 90° - Ø 6,3 - 10,4 - 16,5
           (shank-Ø 8 mm) - 20,5 - 25,0 mm- + 1 x 50 ml tin of cutting spray in
           polystyrene case
E.3.23.10 Counter-bore set M3 - M10: Flat countersinkers for through holes, fine                                     12                 12
          grade, for threads: M 3 - M 4 - M 5 - M 6 - M 8 - M 10
E.3.23.11 Tap and Die stock set, MF3 to MF20, in metal box, complete: 54-                                             6                  6
          piece thread-cutting set - one three-piece set each of hand taps M DIN
          352 - M 3 - M 4 - M 5 - M 6 - M 8 - M 10 - M 12 - M 14 - M 16 - M 18 -
          M 20 - + 11 die, M DIN EN 22568 in each of the sizes M 3 - M 4 - M 5 -
          M 6 - M 8 - M 10 - M 12 - M 14 - M 16 - M 18 - M 20 - + 6 die stock
          DIN 225 in each of the sizes - 20 x 5 mm - 20 x 7 mm - 25 x 9 mm - 30
          x 11 mm - 38 x 14 mm - 45 x 18 mm - + 2 tap wrench, size 1 and size
          3 DIN 1814
          + 1 screwdriver
          + 1 screw-pitch gauge
E.3.23.12 Tap and Die stock set, MF3 to MF20, in metal box, complete: 54-                                             6                  6
           piece thread-cutting set - one three-piece set each of hand taps M DIN
           352 M 3 - M 4 - M 5 - M 6 - M 8 - M 10 - M 12 - M 14 - M 16 - M 18 - M
           20 - + 11 die, M DIN EN 22568 in each of the sizes M 3 - M 4 - M 5 - M
           6 - M 8 - M 10 - M 12 - M 14 - M 16 - M 18 - M 20 + 6 die stock DIN
           225 in each of the sizes 20 x 5 mm - 20 x 7 mm - 25 x 9 mm - 30 x 11
           mm - 38 x 14 mm - 45 x 18 mm + 2 tap wrench, size 1 and size 3 DIN
           1814
           + 1 screwdriver
           + 1 screw-pitch gauge
E.3.23.13 Chuck tap wrench: Version: adjustable left, right, fixed Shank: sliding                                    12                 12
           cross-handle with grooves at both ends Surface: chromium-plated
           Ideal for thread-cutting in inaccessible places. With two-jaw chuck for
           tensioning square shanks. Size: 20
 E.3.24   TOOLS, MILLING                                                                                                                 0
E.3.24.1  Countersink cutter set of 5 pcs, 10-15-20-25-30 mm                                                          6                  6
E.3.24.2  Plain milling cutters, sizes 63x4, 63x8, 80x16 mm                                                           6                  6
E.3.24.3  Shell end milling cutters 40x40, 50x50, 60x60 mm                                                            6                  6
E.3.24.4  Milling head: 75 + 90 degrees - diameter 100 + 125 mm - Supplied                                            6                  6
          with inserts
E.3.24.5 End milling cutters 3-20 mm in metal box                                                                     6                  6
E.3.24.6 Metal slitting saw set 40x1-50x1,5-63x2-80x2-100x3 mm                                                        6                  6
E.3.24.7 T-slot cutters sizes 12,5x6 - 16x8 - 19x9 mm                                                                 6                  6
E.3.24.8 Convex cutter set radius 4, 5, 6, 8 mm                                                                       6                  6
E.3.24.9 Concave cutter set radius 4, 5, 6, 8 mm                                                                      6                  6
E.3.24.10 Involute gear cutter set price per module size (8 cutters)                                                  6                  6
E.3.24.11 Single angle cutter set, 50x16, 63x20, 80x25 mm                                                             6                  6
E.3.24.12 Double angle cutter, 56x8x16, 63x10x22, 80x12x27 mm                                                         6                  6
 E.3.25 GENERAL EQUIPMENT                                                                                                                0
E.3.25.1 Angle plates with clamping slots: • Made of special cast iron with high                                      4                  4
          resistance to wear A • Accuracy of measuring surfaces according to
          DIN 876 • Accuracy of angle according to DIN 875 • Side areas
          carefully milled
E.3.25.2 Swivel angle plate: - Heavy and sturdy Machined construction. -                                              4                  4
           Range 450 each way from Vertical. - Locking action by 2 clamping
           Screws on each end. - Low profile for low machine head clearance. -
           3 Machined "T" slots and precise ground Table Surface. - Also
           available with Swivel Base. - For Swivel Base Model : Swivel
           Graduation 360 Degree. - Table Size: 175 x 250 mm


E.3.25.3 Box angle plate: Construction with clamping slots or with clamping T-                                        4                  4
           slots - Made of special cast iron with high resistance to wear A -
           Accuracy of measuring surfaces according to DIN 876 - Accuracy of
           angle according to DIN 875 - Side areas carefully milled - Size:
           200x150x100 mm
E.3.25.4 V-block set with clamps, 2 pcs, 100x75x75 mm : For clamping                                                  4                  4
           cylindrical pieces • Made of special steel, hardened or stainless steel •
           2 different deep grooves 90°, fine ground • Front faces angular ground
           in regars to base area • Adjusted in pairs

E.3.25.5 V-block set, 2 pcs, 75x150x130 mm: • Made of dense special cast iron                                         4                  4
         with high resistance to wear • Supplied in matched pair • 4 different
         large grooves, 90° • Available in milled or ground pattern
E.3.25.6 Parallels, set: • Hardened and especially relieved special steel • High                                      4                  4
         grade of abrasion resistance • Each gauge block is marked with an
         identification-Number Accuracy : 0 - Quantity per set : 32 pieces

E.3.25.7 Machine vice, 100 mm: · Smooth running with exact jaw guiding, also                                         24                 24
           at high axial load · Spindle with rolled trapezoid thread for smooth
           running · Multiple possibilities for assembly on the drilling table due to
           oblong holes. Technical Data: - Jaw width: 100 mm- Span: 90 mm -
           Jaw height: 28 mm
E.3.25.8 Machine vice, 125 mm: · Smooth running with exact jaw guiding, also                                         24                 24
           at high axial load · Spindle with rolled trapezoid thread for smooth
           running · Multiple possibilities for assembly on the drilling table due to
           oblong holes. Technical data: - Jaw width: 125 mm - Span: 110 mm -
           Jaw height: 30 mm.
E.3.25.9 Electric drill, 13 mm: Capacity in steel 13 mm - Capacity in wood 40                                         4                  4
           mm - Rated input power 790 W - No-load speed 0-1000 /3000/min -
           Collar diameter 43 mm - Weight 2 kg - Standard accessories: Handle ,
           Depth stop
E.3.25.10 Twist drill set, 1 to 13 mm, 25 pcs                                                                         8                  8




                                                                      42 of 46
                                                               Lot E.3. MACHINING




                                                                                                    Hag      Halfait Souk El
  Item     Description                                                                    Kerari                               Kht 1   Total Qty
                                                                                                   Yousif   El Muluk Mahali
E.3.25.11 Drill chuck, 8 mm: - precision quick-action draw-in collet chuck ·                                            8                  8
          Concentricity accuracy less than 0.06 mm - Capacity: 0 - 8 mm -
          Collet: B16
E.3.25.12 Drill chuck, 13 mm                                                                                            8                  8
          - precision quick-action draw-in collet chuck
          · Concentricity accuracy less than 0.06 mm
          - Capacity: 0 - 13 mm
          - Collet: B16
E.3.25.13 Reduction sleeve set, morse taper MT 3-2                                                                      8                  8
E.3.25.14 Ejecting drift set                                                                                            8                  8
E.3.25.15 C-cramp set, 2x75 mm, 2x100 mm, 4 pcs: Malleable cast iron frame                                             12                 12
           with chrome plated square thread screw, tommy bar handle and
           swivel shoe. Two clamps each of sizes 75mm and 100mm capacity
           (approx.).
E.3.25.16 Grease gun, lever type: Die-cast pump head with air-bleed valve. 3-                                          12                 12
          Way fill with cartridge, bulk or manual capability. Supplied with rigid
          extension tube and push-on hydraulic 4-jaw coupling. Contoured pump
          handle. Accepts standard 400g cartridges.
          Capacity: 500cm³ - Delivery Pressure: 10000psi - Delivery per Stroke:
          1.2cm³
E.3.25.17 Sharpening stone, 200x50x25 mm                                                                               24                 24
E.3.25.18 Sharpening stone, round                                                                                      12                 12
E.3.25.19 Soldering iron, 100 W: Class 1 electrically insulated soldering iron with                                    24                 24
          cool grip handle which stays comfortable during prolonged use. Fitted
          with replaceable soldering tip. Includes 1.5mtr of cable with BS
          approved 230Volt/13Amp plug. Power Rating: 100W

E.3.25.20 Electric etcher/marking pen                                                                                  12                 12
           Multi-purpose high-speed power tool with on/off control. Fitted with
           diamond-tipped ball type rotary engraving head. Suitable for engraving
           wood, metal, plastic and glass. Supplied with belt mounted battery
           pack and powered by four AA cells (not included). Includes 1.9mtr
           cable. Ideal for security identification on valuable appliances.

E.3.25.21 Grinding wheel dresser, 150 mm: Aluminium alloy body with four star                                          12                 12
           wheels. Suitable for cleaning, sharpening and trueing grinding wheel
           surfaces. Suitable for use with any grinder. Length: 150 mm

E.3.25.22 Safety goggles, clear lenses: BSEN166/B - Clear polycarbonate safety                                         60                 60
           lens with direct ventilation in goggle frame.
E.3.25.23 Magnetic chuck block 100x50x25 mm: For setting on magnetic holding                                           12                 12
           plates • Made of special steel, hardened, fine ground • With 90°
           groove or in flat construction • With pole dis tance 6 mm • Blocks are
           as pair machined and adjusted
E.3.25.24 Magnetic V-block set, 100x70x96 mm: Especially made for toolmakers                                           12                 12
           etc. • Made of special steel or hardened steel • With prism 90° fine
           ground • With sturdy magnetic base, On/Off switch • Magnet with fine
           ground prism • Plane, parallel and squared machined

E.3.25.25 Cable extension reel, 50 m, 3x1,5 mm2: Durable composite drum on                                              6                  6
           steel stand with three 230V power sockets and thermal overload
           protection. Fitted with ASTA/BS approved 3-pin plug. Fitted with cable
           guide to prevent cable tangling. Voltage: 230V
           Cable Length: 50mtr - Cable Section: 3 x 1.5mm² - Cable Type: PVC -
           Sockets: 3 - Thermal Trip: Yes - Drum Size: Large - Drum Type:
           Composite - Capacity Wound: 1000W - Capacity Unwound: 3500W


 E.3.26 STORAGE, GENERAL HAND TOOLS                                                                                                        0
E.3.26.1 Socket set, 33 pcs, 8 to 32 mm: Socket set with heat treated Chrome                                           12                 12
           Vanadium steel WallDrive® sockets. Dual satin/chrome finish. Flip-
           reverse ratchet with quick socket release. Supplied in metal carry-
           case.Contents: Sockets; 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
           21, 22, 23, 24, 26, 27, 32mm, 3/8”, 1/2”, 9/16”, 11/16”, 10 & 14mm
           Spark Plug Sockets, 1/2”Sq Drive Flip Reverse Ratchet Wrench with
           Quick Release, Swivel Head Breaker Bar 380mm, Universal Joint,
           Extension Bars; 75, 125, 250mm DuoMetric® Coverage: 5/16”, 7/16”,
           15/32”, 19/32”, 3/8”, 3/4”, 25/32”, 7/8”, 15/16”, 1-1/16”, 1-1/4”

E.3.26.2 Combination spanner set, 6 to 32 mm: Drop-forged Chrome Vanadium                                              12                 12
           steel wrenches. Hardened, tempered and chromed with fully polished,
           mirror finish. Open jaw and WallDrive® ring combination with long
           slim shaft. Supplied in tool roll. Contents: 6, 7, 8, 9, 10, 11, 12, 13, 14,
           15, 16, 17, 18, 19, 21, 22, 23, 24, 27, 30, 32mm.


E.3.26.3 Adjustable wrench set, 3 pcs, 20 mm, 25 mm, 34 mm : Hardened and                                              12                 12
           heat treated steel with satin chrome finish. Fully polished, offset jaws.
           Slim raised lip style handle with hanging hole. Length: 150, 200, 250
           mm - Capacity: 20, 25, 34 mm
E.3.26.4 Allen key set, 1.5 to 10 mm, 10 pcs: Manufactured from chrome                                                 12                 12
           vanadium steel hardened and tempered, each held on key ring type
           holder. Display packed. Contents: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0,
           8.0 and 10.0mm.
E.3.26.5 Allen key set, 10 pcs, 1/16 to 3/8 inch AF: Manufactured from chrome                                          12                 12
           vanadium steel hardened and tempered, each held on key ring type
           holder. Display packed. Contents: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16,
           7/32, 1/4, 5/16 and 3/8" AF.
E.3.26.6 C-cramp, mall/cast iron, 150 mm: Hand held vice for the secure                                                12                 12
           clamping of component parts prior to grinding, drilling, etc. Capacity:
           150 mm - Width: 70 mm




                                                                       43 of 46
                                                             Lot E.3. MACHINING




                                                                                                 Hag      Halfait Souk El
  Item     Description                                                                 Kerari                               Kht 1   Total Qty
                                                                                                Yousif   El Muluk Mahali
E.3.26.7 Water pump pliers, 250 mm: manufactured from chrome vanadium                                               12                 12
           electric steel, oil hardened, tempered and chrome plated, with
           smoothly ground jaws, joint faces and an accurately formed box joint
           with safety stop. The parallelogram-shaped gripping surfaces have
           specially hardened teeth to 61HRC for positive grip on pipes and nuts.
           One hand press button adjustment.Heavy duty moulded handles with
           slip guards for extra safety. Has 'no-nip' feature which prevents
           handles locking together and damaging users' hands.


E.3.26.8 Circlip pliers, straight, for outside circlips, 180 mm - manufactured                                      12                 12
           from chrome vanadium electric steel, oil hardened and tempered.
           Forged straight nonslip tips with plastic coated handles.

E.3.26.9 Circlip pliers, straight, for inside circlips, 180 mm: manufactured from                                   12                 12
           chrome vanadium electric steel, oil hardened and tempered. Forged
           straight nonslip tips with plastic coated handles.

E.3.26.10 Diagonal cutting pliers, 160 mm: for delicate and accurate work in a                                      12                 12
           continuous production environment. Manufactured from special tools
           steel, oil hardened and tempered. With full flush cutting jaws. Cushion-
           grip spring-loaded handles.
E.3.26.11 End cutting pliers, 165 mm: drop forged from chrome vanadium steel,                                       12                 12
           hardened and tempered with additionally induction hardened cutting
           edges. Lacquered finish for corrosion protection with heavy duty, soft
           grip handles with slip guards.

E.3.26.12 Snipe nose pliers, 160 mm: for delicate and accurate work in a                                            12                 12
           continuous production environment. Manufactured from special tools
           steel, oil hardened and tempered. With flat-round jaws and cushion-
           grip spring-loaded handles.
E.3.26.13 Flat nose pliers, 160 mm                                                                                  12                 12
E.3.26.14 Round nose pliers, 160 mm: for delicate and accurate work in a                                            12                 12
           continuous production environment. Manufactured from special tools
           steel, oil hardened and tempered. With pointed round jaws and
           cushion-grip spring-loaded handles.
E.3.26.15 Gas pliers: Made from Titacrom Steel. PVC insulated handles -                                             12                 12
           Length: 200 mm - Capacity: 31 mm
E.3.26.16 Vice grip plier, 190 mm: Chrome Vanadium steel jaws hardened and                                          12                 12
           tempered with industrial style satin finish. Deeply serrated jaws help
           grip workpiece. Riveted handle construction provides extra rigidity and
           reduces deformation when grip is under load. Spring- loaded locking
           mechanism prevents nipping fingertips when releasing. General-
           purpose pliers with reinforced teeth for a range of applications. Length:
           190 mm Capacity: 0 - 42 mm
E.3.26.17 Punch and chisel set, 12 pcs: Hardened, tempered and fully polished                                       12                 12
           Chrome Vanadium steel punches and chisels. Supplied in tool roll.
           Contents: Centre Punches; #1 x 8 x 100, #2 x 9.5 x 120mm, Taper Pin
           Punches; Ø3 x 9.5 x 120, Ø4 x 9.5 x 120, Ø5 x 9.5 x 120mm, Parallel
           Pin Punches; Ø2 x 8 x 115, Ø4 x 9.5 x 150, Ø6 x 12.7 x 180mm, Cold
           Chisels; 5 x 9.5 x 130, 7 x 12.7 x 165mm, Utility Chisel x 2, Tool Roll


E.3.26.18 Rivet punch set, 2 to 10 mm                                                                               12                 12
E.3.26.19 Warrington hammer, 340 g: Drop forged high carbon steel head.                                             12                 12
           Induction hardened and tempered with polished face and cheeks.
           Fitted with straight grained hickory shaft. Manufactured and tested to
           BS876. Weight: 340 g
E.3.26.20 Ball pein hammer set, 3 pcs, 12, 16, 24 oz: Drop forged steel heads                                       12                 12
           and fitted with straight grained hickory shafts. Manufactured and tested
           to BS876. Contents: 340 g, 450 g, 680 g
E.3.26.21 Screwdriver set, 11 pcs: Satin chrome plated chrome vanadium steel                                        12                 12
           round blades hardened and tempered with shot blasted tip. Some
           sizes have hexagon bolsters which enables extra power to be
           obtained by use of a spanner. Square matt black handles
           manufactured from high impact resistant plastic. Display packed.
           Contents:• 5 plain slot size: 6.0 x 38, 5.0 x 75, 6.0 x 100 and 8.0 x 150
           and 9.5 x 200mm • 2 cross slot: No.1 and 2 • 1 cross slot chubby:
           No.2 • 2 PZ TYPE: No.1 and 2 • 1 PZ TYPE chubby: No.2


E.3.26.22 Philips screwdriver set, 4 pcs, 0,1,2,3                                                                   12                 12
E.3.26.23 Scraper and hook set, 5 pcs: Chrome Vanadium steel shafts with                                            12                 12
           blackened finish. Suitable for gasket scraping, pin/clip picking, hose
           removal. Classic styled handles. Sizes range from 180 to 280mm.
           Contents: Multi-purpose Scraper; 215, 280mm, Awl 210mm, Pin
           Puller 225mm, Hose Hook 180mm
E.3.26.24 Tinmans shears, straight, 250 mm: For long straight cuts Berlin                                           12                 12
          pattern, pinch protection, right cutting, cushion grip handles high grade
          tool steel - Length: 250 mm
E.3.26.25 Needle file set, 10 pcs: Popular sized needle files. Knurled handle                                       12                 12
          shafts for extra grip. Average overall length 140mm. Contents: Flat
          Parallel, Flat Taper, Half-round, Three-square, Square Form, Round
          Form, Knife Form, Crossing File, Barrette File, Oval Form

E.3.26.26 Number stamp set, 4 mm: Hardened, tempered and chemically                                                 12                 12
           blackened. Set of 9 numeric punches (number 6 doubles as 9). 4mm
           Character height. Supplied in plastic case.
E.3.26.27 Letter stamp set, 4 mm: Hardened, tempered and chemically                                                 12                 12
           blackened. Set of 27 alphabetic punches. 4mm Character height.
           Supplied in plastic case.




                                                                    44 of 46
                                                              Lot E.3. MACHINING




                                                                                                 Hag      Halfait Souk El
  Item     Description                                                                 Kerari                               Kht 1   Total Qty
                                                                                                Yousif   El Muluk Mahali
E.3.26.28 Screw extractors set, 6 pcs: Manufactured from heat treated Chrome                                        12                 12
           Molybdenum steel. Rapid acting helix aids screw removal. Includes
           tap wrench. Extractors supplied in carry-case. Contents: 1/8”-1/4”, 1/4”-
           5/16”, 5/16”-7/16”, 7/16”-9/16”, 9/16”-3/4”, Tap Wrench

E.3.26.29 Tap extractor set: in blue plastic storage case contents: for                                             12                 12
           screwdrivers M3 - M6 - for screwdrivers M6 - M8 - for screwdrivers
           M8 - M11 - for screwdrivers M11 - M14 - for screwdrivers M14 - M18

E.3.26.30 Hacksaw frame, 300 mm: General purpose with an adjustable round                                           12                 12
           steel tube bow frame for 250mm and 300mm blades. Shaped diecast
           handle. Supplied complete with a 250mm carbon steel blade

E.3.26.31 Cold chisel, 19 mm: High quality octagonal steel stock with ground                                        12                 12
          cutting edge. Manufactured and tested to BS3066. Width: 19 mm
          Length: 250 mm
E.3.26.32 Cape chise: For use on metal Octagon section shank - Chrome                                               12                 12
          Vanadium 58 CrV - Width of tip: 8 mm - Length: 175 mm - Octagon:
          14 mm
E.3.26.33 Diamond point chisel: For use on stones - Octagon section shank -                                         12                 12
          Made from Chrome Vanadium 58 CrV 4 - According to DIN 7256 -
          Length: 200 mm
E.3.26.34 Centre punch, automatic, 125 mm: Knurled brass barrel with spring                                         12                 12
          loaded alloy steel point. - Length: 125 mm
E.3.26.35 Double ended scriber, 200 mm: Precision manufactured tool with                                            12                 12
          hardened steel tips. Features straight and 90° tips with knurled body.
          Length: 200 mm
E.3.26.36 Halfround cabinet file, second cut, 250 mm: Carbon chrome steel                                           12                 12
          hardened and tempered with rust preventative finish and dipped in rust
          preventative oil.
E.3.26.37 Flat file, second cut, 250 mm: Carbon chrome steel hardened and                                           12                 12
          tempered with rust preventative finish and dipped in rust preventative
          oil.
E.3.26.38 Hand file, second cut, 250 mm: Carbon chrome steel hardened and                                           12                 12
          tempered with rust preventative finish and dipped in rust preventative
          oil.
E.3.26.39 Halfround file, second cut, 250 mm: Carbon chrome steel hardened                                          12                 12
          and tempered with rust preventative finish and dipped in rust
          preventative oil.
E.3.26.40 Round file, second cut, 250 mm: Carbon chrome steel hardened and                                          12                 12
          tempered with rust preventative finish and dipped in rust preventative
          oil.
E.3.26.41 Square file, second cut, 250 mm: Carbon chrome steel hardened and                                         12                 12
          tempered with rust preventative finish and dipped in rust preventative
          oil.
E.3.26.42 Three square file, second cut: Carbon chrome steel hardened and                                           12                 12
          tempered with rust preventative finish and dipped in rust preventative
          oil.
E.3.26.43 File handle, 110 mm                                                                                       12                 12
E.3.26.44 Filecard cleaning brush: For the cleaning of files, etc. Filled with file                                 12                 12
          card steel wire 360 points per square inch. Brush width 25mm. Filled
          Length: 90mm. Beechwood handle.
E.3.26.45 Bench brush, 280x70 mm                                                                                    12                 12
E.3.26.46 Soft hammer, 790 g: Coated die-cast head and handle of aluminium                                          12                 12
          alloy with absorbent rubber grip. Fitted with two screw-in durable nylon
          faces. Head partially filled with steel shot for controlled blows.
          Replacement faces available with alternative hardness. Weight: 790 g

E.3.26.47 Vice grip plier, 190 mm: Chrome Vanadium steel jaws hardened and                                          12                 12
          tempered with industrial style satin finish. Deeply serrated jaws help
          grip workpiece. Riveted handle construction provides extra rigidity and
          reduces deformation when grip is under load. Spring- loaded locking
          mechanism prevents nipping fingertips when releasing. General-
          purpose pliers with reinforced teeth for a range of applications. Length:
          190 mm - Capacity: 0 - 42 mm
E.3.26.48 Combination pliers, 180 mm: drop forged from chrome vanadium                                              12                 12
          steel, hardened and tempered with additionally induction hardened
          cutting edges. lacquered finish for corrosion protection with heavy
          duty, soft grip handles with slip guards.
E.3.26.49 Tool disk set: Tags are 38mm round with 13mm high black-filled                                            12                 12
           numbers - Numbering only or with 6.35mm legends of HTG, PLBG,
           CW, HW, GAS, AC, HVAC, STM and SPR - Made from 19 gauge
           (approx.) brass with 5mm top hole
E.3.26.50 Tool box, 5-tray, 530 mm, sheet steel, laquered                                                           12                 12
E.3.26.51 Storage cabinet: - 200 x 100 cm. Including 12 shelves with top cover -                                     2                  2
         30 cm with 72 plastic dividers.
         CONSUMABLES                                                                                                                    0
 E.3.27 STORAGE, CONSUMABLES                                                                                                            0
E.3.27.1 Hacksaw blade, 300 mm, 18 tpi: Expert Quality saw edge,                                                    200                200
         manufactured from high speed steel strip, electron beam welded to
         high quality carbon steel backing. Packed 50 blades to plastic box.

E.3.27.2 Hacksaw blade, 300 mm, 24 tpi: Expert Quality saw edge,                                                    200                200
           manufactured from high speed steel strip, electron beam welded to
           high quality carbon steel backing. Packed 50 blades to plastic box.

E.3.27.3 Hacksaw blades, 400 mm                                                                                     20                 20
E.3.27.4 Filecard cleaning brush: For the cleaning of files, etc. Filled with file                                  60                 60
           card steel wire 360 points per square inch. Brush width 25mm. Filled
           Length: 90mm. Beechwood handle.




                                                                      45 of 46
                                                              Lot E.3. MACHINING




                                                                                                Hag      Halfait Souk El
  Item     Description                                                                Kerari                               Kht 1   Total Qty
                                                                                               Yousif   El Muluk Mahali
E.3.27.5 Steel and brass machine screw workshop kit: ISO Metric & BA                                               12                 12
           Threads, Nickel Plated Brass Screws, Nuts & Washers in Drawer Unit.
           A large workshop storage unit supplied with a range of metric and BA
           nickel plated brass screws, nuts, washers and lock washers. Unit
           contains 36 clear polypropylene drawers. Can be wall or bench
           mounted.
E.3.27.6 A4 stainless hexagon screw & nut kit: - Kit contains A4 stainless steel                                   12                 12
           screws and nuts (total 626 pieces) - To DIN933/934 - Highly corrosion
           resistant - Suitable for food, medical, chemical and electronic

E.3.27.7 Selftapping screwkit countersunk/pan head A4 stainlessteel: - A4                                          12                 12
           grade 18 / 8 stainless steel (Type 316 S16) - To DIN 7981 (Pan) and
           DIN 7982 (Countersunk) - Ideal for use in service departments and
           research and development labs - Kit contains 890 self tapping screws,
           supplied in a moulded plastic case .
E.3.27.8 Nut assortmentZinc plated machine screw and hex nut assortment.                                           12                 12
           Partitioned case. Contents: Machine Screws; M3 x 0.5 x 10, M3 x 0.5 x
           12, M4 x 0.7 x 12, M4 x 0.7 x 25, M5 x 0.8 x 25, M5 x 0.8 x 38, M6 x
           1.0 x 11, M6 x 1.0 x 20, M6 x 1.0 x 25, Hex Nuts; M3 x 0.5, M4 x 0.7,
           M5 x 0.8, M6 x 1.0mm
E.3.27.9 Washer kit assortment                                                                                     12                 12
           Split, internal tooth and external tooth lock washer assortment.
           Partitioned case.
           Contents: Split; Ø3, 4, 5, 6, 8, 10mm, Internal Tooth; Ø3, 4, 5, 6, 8,
           10mm, External Tooth; Ø3, 4, 5, 6, 8, 10mm

E.3.27.10 Mixed washer kit: Kit containing A2 stainless steel plain (flat), single-                                12                 12
          coil spring and internal-teeth shakeproof washers, supplied in
          polypropylene storage cases .
E.3.27.11 Steel zinc plated metric plain washer kit: Kit containing BZP steel plain                                12                 12
          (flat), single-coil spring and internal-teeth shakeproof washers,
          supplied in polypropylene storage cases
E.3.27.12 Dowel pin kit: Supplied in a polypropylene storage box Ideal for                                         12                 12
          service and maintenance departments
E.3.27.13 Cotter pin kit: Cotter pin assortment. Partitioned case. Contents: 1.5 x                                 12                 12
          25, 2.5 x 30, 2.5 x 40, 2.7 x 32, 2.7 x 55, 3.6 x 70mm
E.3.27.14 Mixed washer kit: Kit containing A2 stainless steel plain (flat), single-                                12                 12
        coil spring and internal-teeth shakeproof washers, supplied in
        polypropylene storage cases
  E.4 CNC MACHINING SUB-SECTOR                                                                                                         0
E.4.1   CNC LATHE MACHINE                                                                                                              0
E.4.1.1 CNC Training Computer Lathe, floor mounted with built in support                                            2                  2
        cabinet and of slant bed construction to give better visibility of the
        cutting operations and easy swarf removal. The machine cuts Steel,
        brass, aluminium, plastic. The machine is suitable for Training of
        students with no prior knowledge of CNC Machines and allows
        industrial level training with appropriate optional accessories. The
        machine has an integral touch sensitive control panel allowing
        operation without a computer if required, which incorporates
        illuminated push buttons and an integrated emergency stop button.
        The main drive is an AC motor with inverter controlled drive package
        and overload cut-out, axes motors are DC steppers with bi-polar
        chopper drives. The machine has full perimeter guarding with safe
        switches in the positive (safety) mode on access doors and guards,
        which will stop the spindle and axes movements and an interlocked
        swarf tray. The machine includes an automatic programmable 8
        positions tool changer. The machine allows with appropriate optional
        accessories and software easy integration with a Mill as a CAD/CAM
        Laboratory or CIM/FMS system .The software includes 3D solid
        graphics with rotation and zooming. Programming is by ISO G & M
        codes. The software ncludes as an integral part the following
        INCLUDING:                                                                                                                     0
E.4.1.2    Set of Tool Holders                                                                                      1                  1
E.4.1.3    Set of Cutting Tools                                                                                     1                  1
E.4.1.4    Personal Computer                                                                                        1                  1
E.4.1.5    Printer                                                                                                  1                  1
E.4.2      CNC MILLING MACHINE                                                                                                         0
E.4.2.1    A CNC Training Computer 3 axis Vertical Machining Centre with a                                          2                  2
           built in support cabinet.The machine allows industrial level training
           with appropriate optional accessories. The machine has an integral
           touch sensitive control panel which should incorporate illuminated
           push buttons, an integrated emergency stop button allowing the
           machine to be operated without a computer if required. The main drive
           is a DC motor with thyristor controlled drive and overload cut-out, axes
           motors should be steppers with bi-polar chopper drives and allow
           simultaneous movement of all axis. The machine has a full perimeter
           guarding with safe switches in the positive (safety) mode on access
           doors and guards stop spindle and axes movements. The machine
           allows with appropriate optional accessories and software easy
           integration with a Lathe as a CAD/CAM Laboratory or CIM/FMS
           system . The software includes 3D solid graphics with rotation and
           zooming. Programming is by ISO G & M codes.


           INCLUDING:                                                                                                                  0
 E.4.2.2   Set of Tool Holders                                                                                      1                  1
 E.4.2.3   Set of Cutting Tools                                                                                     1                  1
 E.4.2.4   Personal Computer                                                                                        1                  1
 E.4.2.5   Printer                                                                                                  1                  1




                                                                      46 of 46

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:283
posted:5/20/2010
language:English
pages:46