Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

P0430WQLC-T with metal frame simple spec

VIEWS: 22 PAGES: 1

									P0430WQLC-T / 4.3" AM OLED with Metal Frame
                                                                                                                              PIN ASSIGNMENT
                                                                       PIN NO       SYMBOL    I/O                         FUNCTION
                                                                         1~2        TP1~TP2    I     Touch Panel P1~P2
                                                                         3~4        TP3~TP4    I     Touch Panel P3~P4
                                                                         5~6        AR_VSS     I     Negative voltage for OLED
                                                                          7        Test1_VS   Open   Test Pin, it must be open
                                                                         8~9        AR_VDD     I     Positive voltage for OLED
                                                                          10       Test2_VD    I     Test Pin, it must be open
                                                                          11        ARREF     I/O    Panel Refers Voltage (-8V~+8V)
                                                                          12          VGL     I/O    Low Voltage output of regulator VGL
                                                                          13          VGH     I/O    High Voltage output of regulator VGH
                                                                          14          LVO     I/O    Negative output voltage of bosster2.(-8.5V)
                                                                          15         C22N     I/O    Capacitors according to the step-up factor.Leave
                                                                          16         C22P     I/O    this pin open if use internal step-up circuit
                                                                          17          HVO     I/O    Positive output voltage of the booster2.(8.5V)
                                                                          18         C21P     I/O    Capacitors according to the step-up factor.Leave
                            GENERAL INFORMATION                           19         C21N     I/O    this pin open if use internal step-up circuit
LCD Type                4.3" AM OLED with metal frame                     20         C11N
Resolution              480(RGB) * 272 Dots                               21         C11P            Capacitors according to the step-up factor.Leave
                                                                                              I/O
Display Color           24bits / 16M Color                                22         C12N            this pin open if use internal step-up circuit
Outline dimesions       103.5 (W) * 67 (H) *2.05 (T) mm                   23         C12P
Panel Dimension         103.5 (W) * 67. (H)                               24         PVSS      P     Charge pump ground pin
Active Area             95.0 (W)* 53.8 (H)                                25        DDVDH     I/O    Output Voltage of the booster1.(5.11/6.0V)
Pixel Pitch             0.198 (W) * 0.198(H)                            26~27        VSSA      p     Analog ground pin
Driver IC               HX5116                                          28~29         VCI      P     A power supply for Analog Circuit (2.7V~3.6V)
Luminance               250 cd/m Typ                                      30      VGAM1OUT    I/O    Output voltage fo the VGAMV/5.8V)
Contrast Ratio          1/10000                                           31         VDDD     I/O    Internal logic voltage input or output pin
Polarizer Type          Anti-reflective (3H)                              32          VCC      P     Pover supply for the digital circuit (1.5V~3.6V)
Viewing Angle           170 degree                                        33         VSSD      P     Digital Ground Pin
Weight                  TBD                                               34        NRESET     I     Reset pin
Interface               RGB 24bit parallel, 8 bit serial interface        35          NCS      I     Serial Interface enable pin
Connection Type         71 pin Pitch 0.3mm Connector                      36          SCL      I     Serial Interface clock input pin
Lift Time               10000 hrs                                         37          SDA      I     Serial Interface data line
VCC / AR_VDD / AR_VSS(2.5V~3.3v) / (5V-7V ) / (-2V~-8V)                   38          DE       I     Data enable
                                                                          39        VSYNC      I     Frame synchronizing signal
                                                                          40        HSYNC      I     Line Synchronizing signal
                               Mechanical Dimensions                      41         DCLK      I     Dot clock signal
                                                                        42~49       D20~D27    I     Data input
                                                                        50~57       D10~D17    I     Data input
                                                                        58~65       D00~D07    I     Data Input
                                                                          66       TEST3_W    Open   Test Pin, it must be open
                                                                        67~68       AR_VDD     I     Positive voltage for OLED
                                                                        69~70       AR_VSS     I     Negative voltage for OLED
                                                                          71       TEST4_P    open   Test Pin, it must be open




VISION OPTO ELECTRONIC LIMITED                                email: sales@vison-opto.com                                          www.vision-opto.com

								
To top