IP CAMERA NETWORK DVR DVR by sdfwerte

VIEWS: 281 PAGES: 33

									              V1.18.00.05




IP CAMERA

NETWORK DVR

DVR
                                                         V1.18.00.05

INDEX


PartⅠ      Overview……………………………………………                 1

PartⅡ      Products Introduction ………………………………        2

           2.1 Brief Introduction ………………………………       2

           2.2 Key Features ……………………………………           2

           2.3 System Requirements ……………………………       3

           2.4 Available Models …………………………………        4

           2.5 Technical Specifications …………………………   5

Part Ⅲ     Quick Install Guide   ………………………………        9

           3.1 Rear Panel ………………………………………            9

           3.2 System Connection………………………………         14

           3.3 IP Configure ………………………………………          16

           3.4 Software Installation ……………………………     17

Part Ⅳ     Interface and Configure …………………………        17

Appendix   FAQ …………………………………………………                   28
                                                                    V1.18.00.05



     CAUTION:


     For proper use of the IP camera or DVS, please
     follow the following procedures:

     1. Insert the DC power adaptor to the DC input
     on the back of the unit;

     2. Plug the AC power cord into the wall outlet.




PartⅠ        Overview

● Please read the manual carefully before installation.

● IP Cam series are required to be installed indoor
    ● Take the unit away water. Keep it try and aeration
    ● Please install and put in safe place. To be broken if fall.

● IP Dome Cam series can be installed indoor/outdoor
    ● IP 55 Weather Rating
    ● Vandal resistant design

● Make sure of proper power input: 12V DC <5W.

● Please clean the camera lens and windows regularly to keep image
clear.



                                 1
                                                              V1.18.00.05

Part Ⅱ Products Introduction

2.1 Brief Introduction
 Series Network products are introduced advance MPEG-4 compression
 technology. Embedded web server, it transmits real-time image
 through TCP/IP. Offering the users a clear and real-time image
 network surveillance system and application solution, it can be widely
 used in industrial, commercial and home fields.

 2.2 Key Features
 ◆ Functions

 Easily installation using — With a built-in CPU and video processor,
      the users can instant view image when connecting the camera with
      power and network cable. Enables remote monitoring over a local
      area network or the Internet using a standard Web browser.

 Strong compatibility — support various Internet protocol, such as,
      TCP/IP, SMTP, HTTP, PPPOE and others.

 Motion Detection — With pre- and post-alarm buffers.

 Watch Dog — With a built-in Watch dog, to recover the system functions
     and setup.

 MPEG4 Compression format — provides superior image quality at high
    transmission speed. Up to 30 frames per second in all resolutions
    ranging up to 640x480

 Easy for expending —With RS232/RS485 communication port.

 Intelligent upgrade — software download through Internet.

 Reliable quality and power consumption
                               2
                                                              V1.18.00.05


  ◆ Network & Safety

 Support NAT* — User-defined HTTP port
     *NAT: Network Address Translation

 Send Email — Scheduled and triggered event functionality with alarm
     notification via e-mail through SMTP.

 Support DDNS & PPPOE

 Security — multi-user level password protection for restricted camera
     access (Up to 5 users).

  IP and MAC address filtering


2.3 System Requirements
CPU: INTEL/AMD 1.2G/2.0GMhz or above
Memory: above128/256MB
Apparent card: above 32M/64M. 32bit color MS
Internet browser: above IE5.0




                              3
                                                              V1.18.00.05


2.4 Available Models




              IP Cam                IP Dome Cam for outdoor




       4ch Standalone Net DVR                DVS




                                4
                                                                  V1.18.00.05
2.5 Technical Specifications

Name                                            IP CAMERA

               CCD Sensor            1/4 Sony        1/3 Sony Super HAD
               Resolution            420TVL                   480TVL
Hardware CPU                                32bit RISC CPU
               RAM/ROM                          64MB/8Mb
               Operating Sys.           Embedded Linux RTOS
               Ethernet Port                       RJ45
Connect
-ion                                 TCP/IP, HTTP, ARP,PARP,ICMP,
               Protocol
                                         DHCP,SMTP, PPPOE
               Resolution       D1:720*576; CIF:352*288; QCIF:176*144
               Compression
                                                  MPEG4
Image          format
                                         PAL: 25 frames/sec.
               Max. Frames
                                         NTSC: 30frames/sec.
AES                                         ON/OFF switch
BLC                                         ON/OFF switch
Iris Control                                     DC/Video
Mini Illumination                                 0.1Lux
Com. Port                                   RS485(Pelco-P)
Audio                                           A-Law;V-Law
Power                                      DC 12V ≤350mA
Operating temp.                          -5℃--45℃ (RH 85%)


                                 5
                                                              V1.18.00.05


Name                               IP DOME CAM FOR OUTDOOR

            CCD Sensor             1/4 Sony       1/3 Sony Super HAD
            Resolution             420TVL                 480TVL
Hardware CPU                              32bit RISC CPU
            RAM/ROM                           64MB/8Mb
            Operating Sys.            Embedded Linux RTOS
            Ethernet Port                       RJ45
Connect
-ion                               TCP/IP, HTTP, ARP,PARP,ICMP,
            Protocol
                                       DHCP,SMTP, PPPOE
            Resolution       D1:720*576; CIF:352*288; QCIF:176*144
            Compression
                                               MPEG4
Image       format
                                       PAL: 25 frames/sec.
            Max. Frames
                                       NTSC: 30frames/sec.
AES                                            AUTO
BLC                                            AUTO
Lens                                          3.6/6/8mm
Weatherproof Rating                             IP 55
Mini Illumination                              0.5Lux
Power                                    DC 12V ≤350mA
Operating temp.                        -5℃--45℃ (RH 85%)




                               6
                                                             V1.18.00.05


Name                               1ch DVS              4ch DVS

            CPU                          32bit RISC CPU
Hardware RAM/ROM                             64MB/8Mb
            Operating Sys.            Embedded Linux RTOS
            Ethernet Port                      RJ45
Connect     Video input            BNC x 1              BNC x 4
-ion
                                   TCP/IP, HTTP, ARP,PARP,ICMP,
            Protocol
                                       DHCP,SMTP, PPPOE
            Resolution       D1:720*576; CIF:352*288; QCIF:176*144
            Compression
                                              MPEG4
Image       format
                                       PAL: 25 frames/sec.
            Max. Frames
                                       NTSC: 30frames/sec.
Com. Port                                RS485 (Pelco-P)
Audio                                     A-Law; V-Law
Power                                    DC 12V ≤250Ma
Operating temp.                        -5℃--45℃ (RH 85%)
Dimension (mm)                         138(W)*32(H)*110(D)
Weight                                         450g




                               7
                                                              V1.18.00.05


Name                                    4ch Standalone DVR

            CPU                           32bit RISC CPU
Hardware RAM/ROM                             64MB/8Mb
            Operating Sys.             Embedded Linux RTOS
            Ethernet Port                      RJ45
Connect     Video input                       BNC x 4
-ion
                                    TCP/IP, HTTP, ARP,PARP,ICMP,
            Protocol
                                        DHCP,SMTP, PPPOE
            Resolution       D1:720*576; CIF:352*288; QCIF:176*144
            Compression
                                              MPEG4
Image       format
                                        PAL: 25 frames/sec.
            Max. Frames
                                        NTSC: 30frames/sec.
Com. Port                                 RS485 (Pelco-P)
Power                                      DC 12V(2.5A)
Operating temp.                         -5℃--45℃ (RH 85%)
Dimension (mm)                          138(W)*32(H)*110(D)
Weight                                         3kgs




                                8
                                                            V1.18.00.05

Part Ⅲ Quick Install Guide
3.1 Control Panel
                               IP Cam




① PWR -- power status indicator. LED is Red when turning on.
② LINK – Network status indicator
    The LED lights when the network links.
    The LED flash quickly when the network is linking.
    The LED flash slowly when the network is disconnected.
③ 100M -- Link Speed Compatible with 10/100M.
(Green light is ON when reaching 100M)
④ Ethernet – RJ45 Ethernet connector
⑤ DC-ADJ – Set DC iris level manually. Please use this POT with DC
    drive auto iris lens.
⑥ 12V DC – Power input terminal
⑦ RS485 -- Exterior alarm and PTZ control port*
⑧ BLC -- (Back Light Compensation) ON/OFF switch
    When strong light(sun, sky, illumination, etc.)    ON  OFF
  is present behind the object will appear dark.
  In this case, put this switch in ON position.



                               9
                                                                   V1.18.00.05


  Tips:
  1. It is recommended to set this SW to OFF position when using the
      unit with a Pan/Tilt.
  2. If the desired objects are not in the center of the picture backlight
      Compensation may not work effectively.



   AES – (Auto Electronic Shutter) ON/OFF switch
   When using auto iris lens, set this SW to OFF. Otherwise, set to ON.




Auto iris output connector
For connecting the cable of an auto iris lens, wire connector pins as below.
        No.           DC
        1         CONTROL -
        2        CONTROL +
        3          DRIVE +
        4          DRIVE -




                                  10
                                                                   V1.18.00.05


                                 IP Dome Cam
  Install step by step
  Step 1: Loose the screw (①). And open the dome cover.
  Step 2: Insert the 3 pieces screw enclosed in the package into the hole (②)
  Step 3: Fix the 3 pieces screw to ceiling or “L” bracket
  Step 4: Close the dome cover and fix the screw (①)




                           内六角 螺丝
                            ①

                                                             螺丝孔
                                                           ②




                                ③“L” Bracket
                             支架
                                (Optional Accessories)
IP 网 络 摄 像 机 (Outdoor)
   Dome Cam




                                    11
                                                          V1.18.00.05
                   4ch Standalone Net DVR




1       Fan       Fan
2     Ethernet    RJ-45 connection
                  From left to right:100M light、LINK light 、PWR
3       LED
                  light
4    COM-PORT     RS-485 connector
5       USB       USB backup port
6    CMAERA IN    Video inputs
                  (1) Video output for monitor
7    VIDEO OUT    (2) VIDEO OUT port for backup under palyback
                      mode
     ALARM IN /
8                 DB-9 Port. 4Ch alarm input and 1Ch relay output
       Relay
9       VGA       VGA output
10     Power      Power in
11     FUSE       Fuse




                             12
                                                               V1.18.00.05
                                1ch DVS




                                4ch DVS




① 100M -- Link Speed Compatible with 10/100M.
   (Green light is ON when reaching 100M)
② LINK – Network status indicator
  The LED lights when the network links.
  The LED flash quickly when the network is linking.
  The LED flash slowly when the network is disconnected.
③ PWR -- power status indicator. LED is Red when turning on.
④ Video in – Video Input.
⑤ Audio In – Audio input.
⑥ Ethernet – RJ45 Ethernet connector
⑦ RS485 -- Exterior alarm and PTZ control port*
⑧ 12V DC – Power input terminal
                           13
                                                                     V1.18.00.05
RS-485 Connector Pins as below,
                                            1. GND
                                            2. Alarm input
                                            3. RS-485(-)
                                            4. RS-485(+)
                                            5. GND
                                            6. System Reset (work with port #1)
                                            7.
                                            8. OC OUT (-)
                                            9. OC OUT(+)

    ※ Port #3 & #4 can connect with receiver of Pelco-P protocol
    ※ The address Code of the unit is “0”
    ※ When Port #1 or Port #6 short less than 2 second, it will
    return to the first setup at the factory.



3.2 System Connection
  3.2.1 Review image on single PC
  Directly connect PC to IP camera/DVS/DVR without the use of a hub or
switch through a crossover network cable. On this way, the user can review
the image on the connected PC only.
  3.2.2 Review image in LAN
                                         Hub/Switch




                    PC




                                 Network Cable



                  PC




                                                 IP CAM / DVS/DVR


                               14
                                                              V1.18.00.05
  Connect PC and IP camera/DVS/DVR together with Hub/switch through
  a straight through network cable. To make sure every terminal
communicates each other. On this way, the user can review the image on
                               14
any of the computers in the LAN.
   3.2.3 View image through Internet


                          INTERNET
                                                         PC




                                                WAN




               PC                               Router



                         Network Cable


             PC



                                      IP CAM/ DVS/DVR

     Connect PC and IP camera/DVS/DVR together with Hub/switch/router
through a straight through network cable. Access Hub/switch/router to
Internet. (Ref. To the user guide of Hub/switch/router)




                                 15
                                                             V1.18.00.05


3.3 IP Configure
Ensure proper Operating System (Windows 2000 or above) is available on
your PCs. Default IP address of the unit is 192.168.1.126. and default
Subnet Mask is 255.255.255.0. Default user name is admin and no
password needed.
   1) To set up the TCP/IP Protocol for the PCs, which need to be
        configured IP address, as below steps:
   Start>Network Connections>Local Area Network>Properties>Internet
   Protocol (TCP/IP)
   2) Configure the network parameters. IP address is 192.168.1.xxx
("xxx" is from 2 to 254), Subnet Mask is 255.255.255.0, and
Gateway IP is the Router's IP address.




   Tips:

   The value IP address of the camera/DVS/DVR and the
   computer should in same segment, but not the same.
   For example: if IP address of the unit is 192.168.1.126, IP
   address of the computer should be one in the 192.168.1.X. (X
   is from any numbers of 0~255 except 126)




                               16
                                                                      V1.18.00.05




3.4 Software Installation
 3.4.1 Auto install Software
 1) Insert the enclosed CD in the CD-ROM of your PC. A window flicked.




 Before install the software, please read the file “Readme. txt” in the CD first.
 2) Install Directx9.0C (if necessary)
 The Directx version should be on/above 9.0.
 3) Install OCX firmware
 You have to install a OCX firmware before reviewing the image of IP
 camera/DVS/DVR.
             A window flicked indicating register success.

   3.4.2 Manually install OCX
   1) Open the files in CD
   2) click OCX/install




   3.4.3 Manually uninstall OCX
                                     17
                                                                    V1.18.00.05
    The user must uninstall the origin OCX ActiveX before upgrading a
    new one.
    1) Open the files in CD
    2) Click OCX/uninstall

    3.4.4 the security level of IE Configure
    1) Open IE browser
    2) Click Tool>options>security>customs level>security
        setting>disable ActiveX controls and plug-ins.
              For first access to IP camera/DVS/DVR only.

    3.4.5 Access IP camera/DVS/DVR
    In Internet Explore, input the IP address of the unit. A dialog box flicks.
Input the user's name and password.




         User's name: admin (Default)
         No need Password (Default)
         Click OK.




                                   18
                                                                V1.18.00.05

Part Ⅳ Interface and Configure
 4.1 Homepage




PTZ control: control PT direction(Up/Down/Left/Right). When Clicking the
“HOME” button on the center, a dialog box flicks. Input the number 1~10 to
setup speed of PT.
Zoom: Adjust the size of the appearance
Focus:Focus the camera’s varifocal lens if any.
Play :Live camera image
Stop :Stop recording
Record: Record the images of camera shoot to computer.
Snap: Snap a still image to computer
Play back: Playback record
Setup:Enter system setup menu




                              19
                                                                V1.18.00.05


4.2 Click setting button to enter system sub-interface below




Current version: Show the version of the unit
Camera name: Name the camera
Update version: Click “browse” to choose the path of the file. And click ”
Update” to upgrade automatically.
Restart: Restart the IP camera/server
Default: Reset factory setup
Save: Save Change
Reset: Reset current setup in order to make new setup invalidly.




                             20
                                                                         V1.18.00.05


4.3 Click video & audio to enter sub- interface below,




Resolution:
PAL: D1 (720x576); CIF (352x288) or QCIF (176x144).
NTSC: D1 (720x480); CIF (352x240) or QCIF (176x144).
Compression: Range from 5 to 16.
                             21
The smaller number, the clearer image. Whereas the bigger number, the
bluer image
Limit Frame Rate:PAL : Range from 1 to 25. NTSC: Range from 1 to 30
(D1:PAL Max.25fps, NTSC Max. 30fps)

 Tips:
 User should choose the above according to the network bandwidth.
 The clearer image and higher resolution, the more data transmission and the lower

Watermark ON/OFF:With Built-in watermark anti-false tech. To prevent
from modifying pictures illegally.
Motion detection ON/OFF: When the function is ON, a small square
blank is marked on the moving object.
OSD setting: Help to identify the image;
                              21
                                                              V1.18.00.05
Text: Range from 1 to 32
Position: Position of the text on the screen
Color: Setup the color of text ranging from 0 to 255
Save snap shot path: Click “browse” to choose the storage path of the
snap shot picture file.
Save record path: Click “browse” to choose the storage path of the
record file.
Audio Compression: Built-in microphone. Choose 16k bit/s, 24 k bits/s、
32 kbit/s、48 kbit/s, A-law or U-law.
The audio frequency rate:Setup the audio frequency rate
Data format: Set the format of the audio frequency;



4.4 Click network setting to enter sub- interface below,




    DHCP: Obtain an address automatically. The related setting setup
automatically as well.
   SHCP:
    IP address: Input the IP address of the unit.
                               22
                                                            V1.18.00.05
   Subnet Mask: Set subnet mask address of the IP camera
   Gate way: Set gateway of IP camera;
   Port: Range from 1 to 65535 (default:80);.



4.5 Click the DDNS setting and enter sub- interface:




Choose server: On the base of Dynamic IP network, active the function.
The unit supports 2 dynamic DNS services companies. Users can register
at the website below,
 www.oray.net (PeanuHull)
 www.dyndns.com (Dyndns)
User address: Input domain name
User's name: Input login name
Password: Input password of domain-name




                           23
                                                             V1.18.00.05


4.6 Click the SMTP setting and enter as follows sub- interface:




    Primary mail server: for sending Email address
    Secondary mail servers: In the case of something wrong with the
    Primary mail server, active the secondary one.
    From mail address: Input email address for sending out.
    Send test email to: Input E-mail address for receiving.
    User name: for sender email
    Password: for sender email

    * The unit supports the email from tom.com only.




                             24
                                                V1.18.00.05


4.7 Click PPOE setting and enter a submenu:




Enable PPPOE: Yes/No
User name: dial-up account
Password: dial-up password
MTU: dial-up MTU value
Email notification when IP is changed: Yes/No
IP address: IP add. Of the unit
Default gateway: gateway Of the unit
Primary/Secondary DNS server
Linking status




                           25
                                                           V1.18.00.05


4.8 Click user setting and enter a submenu:




   User list: Listing all the pending users
   New user: Add new user
   Group: edit the users security level
   Password: set password for new user
   Confirm password: input again to confirm the password
   Delete user: delete user from the list
   Modify password: to modify a password of the listed user
   Password/Confirm password: set new password and confirm
   Enable anonymous viewer: Choose to Limit login interviewer




                            26
                                                             V1.18.00.05


4.9 Click Log to enter sub- interface:




   Mode: Choose the mode of log, Dram and Flash
   Flash Write time: under flash mode, input the numbers ranging from 1
   to 65535 min.




                              27
                                                                 V1.18.00.05


4.10 Click AVI Transform to enter sub- interface:




AVI transformed:
click “browse” to find the record file need to be transformed.
(Media-player and realplayer support the file of .avi format)
Alarm preset
Motion Detection: ON(SMTP works)/OFF(SMTP doesn’t work)
Send Email with JPEG: Yes/No




                               28
                                                                   V1.18.00.05
Appendix
◆ Frequently asked questions

Q. What if I forget my password?
A. Every access to Network Camera needs authentication. If you are one
of the managed users, you have to ask the administrators for the password.
If you are the administrators, there is no way to recover the root password.
The only way to regain access to Network Camera is to utilize the default
setting button on the rear panel to restore the factory
settings and reinstall it (Re. Page 5).

Q. Why can I not watch video from Network Camera after it is
authenticated?
A. There are many possible scenarios regarding this problem,
1. If you have just installed Network Camera and are unable to watch the
    video, check the video modulation on the Configuration page.
2. Check if the ActiveX plug-ins installed successfully.
3. If Network Camera is well installed and you are accessing Network
    Camera for the first time using Internet Explorer, adjust the security
    level of Internet Explorer to allow installation of plug-ins.
4. If the problem still exists after adjusting, the current users may be over
    the system allows.

Q How to set the security level of IE?
A. Please setup step by step below
1. Open IE browser.
2. Click Tool>options>security>custom level> Security setting>Disable
    ActiveX controls and plug-ins.
3. Click OK to save change.



                                 30
                                                                V1.18.00.05
Q. How fast is the video rate of Network Camera?
A. The MPEG4 codec can process 30(25) frames per second internally.
However the total performance is subject to many coefficients as follows:
1. network throughput.
2. bandwidth share.
3. number of users.
4. the complicated objects in view results in larger image file.
5. the level of your PC or notebook which is responsible for displaying
images.
In general, the transfer rate in a general local network environment can
achieve over 200kilobytes per second and approximately 10 to 20 pictures
of a normal environment per second.

Q. Why does the image not refresh regularly?
A. There are many possible scenarios, such as bandwidth, picture quality,
computer and numbers of current users.

Q. How can I keep Network Camera as private as possible?
A. Network Camera is designed for surveillance purposes and has many
flexible interfaces. The user authentication and special confirmation in
installation can keep Network Camera from unauthorized access. You may
also change the HTTP port to non-public number. You can check the
system log to examine any abnormal activities and trace the origins.

Q. How many users are allowed to watch Network Camera at the
same time?
A. Not more than 5 users to watch at the same time.




                               31
                       V1.18.00.05




Version: v1.18.00.05
Date: June, 2006

								
To top