Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

HOME THEATRE MASTER Docking Charger

VIEWS: 13 PAGES: 4

  • pg 1
									HOME THEATRE MASTER
Universal Touch Screen Remote Control
Docking Charger
Owner’s Manual
1 Introduction                                                                       1.2 Getting to know your Docking Charger
                                                                                          1. Docking charger       5. LED indicator
Thank you for choosing your Home Theatre Master Touch Screen
                                                                                          2. Remote holder         6. Power connector
remote and this Docking Charger. We hope you love them and take
                                                                                          3. Connection pins       7. USB jack
them as your Personal Digital Assistant for your Home Theatre system.
                                                                                          4. Release button
Before operating the Docking Charger, please read thoroughly this
manual. Then, reserve it for future reference.

1.1 Key Features
       • Fast charging device for your Home Theatre Master Universal
         Touch Screen Remote Control
       • Connecting your Home Theatre Master Universal Touch
         Screen Remote Control to home computer system for remote
         advanced editing and data back up (PC Link)
       • LED indicator for charging status display                                                                                      6
       • USB cable included for PC connection
                                                                                                                                        7
                                                                                     1
       Note:
       This equipment has been tested and found to comply with limits
       for a Class B digital device, pursuant to Part 15 of the FCC Rules.
       These limits are designed to provide reasonable protection against
       harmful interference in a residential installation. This equipment
       generates radiate radio frequency energy and, if not installed and
       used in accordance with the instruction, may cause harmful
       interference will not occur in a particular installation. If this equipment
       does cause harmful interference to radio or television reception,
       which can be determined by turning the equipment off and on, the              2
       user is encouraged to try to correct the interference by one or more
       of the following measures:
       – Reorient or relocate the receiving antenna.
       – Increase the separation between the equipment and receiver.                 3
       – Connect the equipment into an outlet on a circuit different from
          that to which the receiver is connected.
       – Consult the dealer or an experienced radio/TV technician for                4
          help.
       “Modifications not authorized by the manufacturer may void users’             5
       authority to operate this device.”




                                      1                                                                        2
1.3 Specifications                                                             3 How to perform remote advanced
        Design for Home Theatre Master Universal Touch Screen                        editing via computer
        Remote Control
        Power requirement: DC 9V, 400mA, 3.6VA                                 1.   Make sure that your computer is loaded with one of the following
        Charging time:      3-4 hours                                               operating system: Windows 98SE, Windows 2000, Windows NT
        Dimensions:         225 x 100 x 45mm                                        or Windows XP.
        Weight:             130g approx.                                       2.   Download the REMOTE ENGINE software from the suggested
        Included accessory: USB cable                                               website. Install the program and reboot your system.
        For improvement purposes, specifications and functions are subjected   3.   Make sure your Home Theatre Master Touch Screen Remote is
        to change without priority notice.                                          connected with the Docking Charger. See section “ 2 How to
                                                                                    perform quick charge function ” – step 4.
                                                                               4.   Connect the supplied USB cable to the USB jack of the Docking
                                                                                    Charger and one of the available USB connector of your computer
2 How to perform quick charge function                                         5.
                                                                                    system.
                                                                                    Activate the PC Link function on the Home Theatre Master Touch
1.   Make sure that your Home Theatre Master Touch Screen Remote                    Screen Remote by tapping “Menu” and then, select “PC Link”.
     is installed with 4 pcs AAA NiMH rechargeable batteries and               6.   Run the REMOTE ENGINE software from your computer system.
     remove the rubber protector.                                              For operating the REMOTE ENGINE software, please follow the instruction
2.   Make sure you have the DC power adaptor from the Home Theatre             manual from the software package.
     Master Touch Screen Remote package.
3.   Put the power adaptor into AC wall outlet, insert the DC jack to

4.
     the power connector of the Docking Charger.
     Now, slide your Home Theatre                                              4 Maintenance
     Master Touch Screen Remote onto                  Remove the rubber
                                                             protector
     the Docking charger until the                                             –    Do not expose your Docking Charger to dust, strong sunlight,
     connection pins are locked.                                                    humidity, high temperature, or mechanical shock.
5.   The Green LED of the Docking                                              –    Do not use corrosive or abrasive cleansers on your Docking
     Charger lights up.                                                             Charger.
6.   It takes about 3 to 4 hours to fully                                      –    Keep the unit dust free by wiping it with a soft, dry cloth.
     charge the remote.                                                        –    Do not disassemble your Docking Charger, it contains no user-
7.   When the charging process is                                                   serviceable parts.
     completed, the Green LED of the
     Docking Charger will be turned off.
8.   Press the “Release Button” of the
     Docking Charger to release the
     Home Theatre Master Touch
     Screen Remote.




                                    3                                                                            4
5 Troubleshooting
Q : My Docking Charger does not charge my remote!!!
A:   Make sure that your Docking Charger is connected properly
     with the Home Theatre Master Touch Screen Remote, see
     section “ 2 How to perform quick charge function ”.
A:   Check whether your Home Theatre Master Touch Screen
     Remote is loaded with packaged NiMH rechargeable batteries
     and are inserted properly in correct +/– marks.
A.   Make sure that you have connected the DC power supply
     with your Docking Charger and an available AC outlet.

Q : How can I connect my Home Theatre Touch Screen Remote
    with my computer system?
A:   Please refer to section “ 3. How to perform remote advanced
     editing via computer ”.
A:   After proper connection, make sure that you have activated
     the PC Link function from the Home Theatre Touch Screen
     Remote.




                               5

								
To top