Removeinstall center console

Document Sample
Removeinstall center console Powered By Docstoc
					ar6820p2000gh                                                          Page 1 of 1                                                       Remove/install center console




AR68.20- P- 2000GH            Remove/ install center console                                                                                         4.2.97
MODEL                          1                     1
            163.113 /128 / 136 / 54 / 157 /172 / 174 / 75




                             P68.20- 0447- 01                                         P68.20- 0449- 01                                             P68.20- 0452- 01

 1    Housing                                           3   Screws                                             S21/ 15s1          Left rear power window switch
2     Screws                                           4    Screws                                            S21/ 15s2           Right rear power window switch




                        Remove, Install
1                       Remove armrest cover from center console                                                                      AR68.20-P-2370GH
2                       Remove cover on gearshift lever                          Up to 31.08.01                                       AR68.20-P-2310GH
                                                                                 As of 01.09.01                                       AR68.20-P-2310GI
3                       Unscrew screws (2) from front of housing (1)
4.1                     Disconnect electrical connector on right and left        Up to 31.08.01: Remove wiring harness
                        rear power window switches (S21/ 15s1 and S21/      from mount.
                        15s2)
4.2                     Disconnect connector from floor in center                Up to 31.08.01: Remove wiring harness
                        console                                             from mount.
5                       Unscrew screws (4) from rear of housing (1)
6                       Remove housing (1)                                       Set selector lever to position N
                                                                                  Installation: As of 01.09.01, ensure that air
                                                                            duct is installed tightly.
7                       Install in the reverse order
ar8260p7502ea                                                 Page 1 of 2                                               Remove/install radio




AR82.60- P- 7502EA           Remove/ install radio                                                                         5.5.94
MODEL 129
mit Einblockgerät, Bedienteil Zweikomponentengerät 2. Generation und MB- Radios
MODEL       163
            with CODE (257) Radio Hi- Line
            with CODE (259) Radio Premium with Bose sound system
            with CODE (352a) COMAND operating and display system
            with CODE (353) Audio 30 APS
            with CODE (357) Navigation system - additional unit
            with CODE (522) Modular control system (MCS) radio USA
            with CODE (750a) MB radio Audio 30 RDS
            with CODE (752) Radio Becker Mexico 2000 with traffic news decoder
            with CODE (753) MB radio Audio 30 RDS
            with CODE (756a) MB radio Audio 10 RDS with CD compartment
MODEL       168
            with CODE (353) Audio 30 APS
            with CODE (750b) MB Audio 30 radio with TP/ RDS
            with CODE (752a) MB Audio 30 radio without TP/ RDS
            with CODE (753a) MB Audio 10 CC radio with TP/ RDS
            with CODE (754) MB Audio 10 CC radio without TP/ RDS
            with CODE (756b) MB Audio 10 CD radio with TP/ RDS
            with CODE (758a) MB audio 5 radio
            with CODE (759a) MB audio 5 TP radio with RDS
MODEL       170
            with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker)
            with CODE (512a) Radio MB Special with traffic news decoder, with RDS
            with CODE (515a) Radio MB Classic with traffic news decoder, with RDS
            with CODE (516a) Radio MB Classic without traffic news decoder
            with CODE (755) MB Special radio with CD drawer
MODEL       202
            with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker)
            with CODE (512a) Radio MB Special with traffic news decoder, with RDS
            with CODE (515a) Radio MB Classic with traffic news decoder, with RDS
            with CODE (516a) Radio MB Classic without traffic news decoder
            with CODE (750) Radio Becker Europa 2000
            with CODE (751) Radio Becker Grand Prix 2000 with RDS
MODEL       208
            with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker)
            with CODE (512a) Radio MB Special with traffic news decoder, with RDS
            with CODE (515a) Radio MB Classic with traffic news decoder, with RDS
            with CODE (516a) Radio MB Classic without traffic news decoder
MODEL       210
            with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker)
            with CODE (512a) Radio MB Special with traffic news decoder, with RDS
            with CODE (515a) Radio MB Classic with traffic news decoder, with RDS
            with CODE (516a) Radio MB Classic without traffic news decoder
            with CODE (750a) MB radio Audio 30 RDS
            with CODE (753) MB radio Audio 30 RDS
            with CODE (756a) MB radio Audio 10 RDS with CD compartment
MODEL                          2                     2
            463.200 /204 / 206 / 07 / 208 /209 / 220 / 21 / 224 / 25 / 227 / 28 / 230 / 31 / 232 /233 / 240 / 41 / 243 / 44 / 245 /
                                                                2          2          2                     2          2
                      2               2                     3
            246 / 247 / 48 / 249/ 250 / 54 / 300 /304 / 307 / 08 / 309 / 20 / 321 / 22 / 323 / 24 / 325 /327 / 328 / 30 / 331 / 32 /
                                                                       3          3          3                     3          3
            333
            with CODE (ER5) MB "Classic" radio or standard class stereo cassette radio
            with CODE (ER6) MB "Special" radio or mid- class stereo cassette radio
ar8260p7502ea                                                     Page 2 of 2                                                        Remove/install radio




              with CODE (ER7) MB "Exquisit" radio or comfort class stereo cassette radio
MODEL         414.700
              with CODE (EF8) Sound 10 radio
              with CODE (EF9) Sound 20 radio
              with CODE (EG5) Sound 30 radio
              with CODE (EG6) Audio 10 comfort radio, D2B networked

The figure shows removal of radio in model 202



51   Removal tools
A2   Radio




                                                                                                                                             P82.60- 0001- 06




                              Remove, Install
1                            Disconnect ground cable of battery              On model 163, 210, insulate cable terminal    AR54.10-P-0003A
                                                                       for ground lead to prevent unintentional contact
                                                                       between disconnected ground lead and ground
                                                                       point W10
                                                                       Model 463 except 463.241 with code 979.             AR54.10-P-0003G
                                                                       Model 463.241 with code 979.                        AR54.10-P-0003PV
2                            Pull out radio (A2)                            First, insert the detent release tools (51).
                                                                       Press retaining springs (arrow) back on removed
                                                                       radio (A2) and pull out removal plates (51)
k                            MB radio                                  Model 202.                                          BT82.60-P-9309-01A

k                            MB radio                                  As of 02/ 97.                                       BT82.60-P-9309-01B
k                            MB radio                                  Model 129 as of 02/ 91.                             BT82.60-P-9309-01C
3                            Unplug electrical connectors.
4                            Install in the reverse order
5                            Code radio                                Code 750, 751.                                      AR82.60-P-7502-01A
                                                                       Code 510a, 512a, 515a, 516a, 755, ER5, ER6,         AR82.60-P-7502-01B
                                                                       ER7.
                                                                       Model 129.                                          AR82.60-P-7502-01C
                                                                       Models 168, 414.                                    AR82.60-P-7502-01GC
                                                                       Model 163.                                          AR82.60-P-7502-01GH
ar6810p1400gi                                                               Page 1 of 1                                            Remove/install glove compartment




AR68.10- P- 1400GI                Remove/ install glove compartment                                                                               22.4.99
MODEL 163.136 /154 / 172 #Aas of 145273,
163.136 / 154 /172 #X as of 708319,
                         1
163.113 / 128 /157 / 174 / 75

 1       Glove compartment lid
2        Screws
3        Glove compartment
4        Instrument panel
5        Spreading rivets
E13/1    Glove compartment lamp




                                                                                                                                                 P68.10- 2330- 06




                             Remove/ Install
1                            Open glove compartment lid (1)
2                            Unclip glove compartment lamp (E13/ 1) and
                             disconnect connector
3                            Unscrew bolt (2)                                         Torx bit set                                  *000589011000
4                            Remove upper spreading rivets (5) from glove             Press pressure pin approx. 4 mm upward
                             compartment (3)                                     and remove spreading rivet downward.
5                            Pull glove compartment (3) out of instrument
                             panel (4)
6                            Install in the reverse order                              Align upper edge of glove compartment lid
                                                                                 (1) in relation to instrument panel (4).




          000 589 01 10 00

            Torx bit set
ar6830p4050gh                                                                     Page 1 of 1                                         Removing and installing paneling on A-pillar




AR68.30- P- 4050GH                   Removing and installing paneling on A- pillar                                                                            12.3.97
MODELS                                      1          1
                   163.113 / 128 /136 / 154 / 57 / 172 / 74 / 175

Vehicle illustrated up to 31.8.98

1     A- pillar paneling
2     Door rubber seal
3     Cover cap
4     Bolt




                                                                                                                                                             P68.30- 0537- 06




                                Remove/ install
1                              Remove door rubber seal (2) in area of A- pillar
2.1                            Remove cap (3)                                          Up to 08/ 98.
3.1                            Unscrew screw (4)                                       Up to 08/ 98.
4                              Remove A- pillar paneling (1)                                 The paneling is fastened in the instrument
                                                                                       panel at the bottom with lugs and will be
                                                                                       fastened with a clip at top as of 09/ 98.
                                                                                       Installation: Replace clip
                                                                                            Long wedge                                         *115589035900
5                              Install in the reverse order                                  On vehicles up to 08/ 98, on which a new
                                                                                       paneling should be installed, the upper area of
                                                                                       the fixing opening at the top of the A- pillar must
                                                                                       be enlarged so that the clip retainer of the
                                                                                       paneling can be installed in the A- pillar.




           115 589 03 59 00

             Long wedge
ar6860p5480gh                                                             Page 1 of 1                                             Removing and installing sun visor




AR68.60- P- 5480GH                    Removing and installing sun visor                                                                          20.3.97
MODEL          163

 1             Sun visor mount
2              Screws
3              Roof frame grab handle
4              Roof wiring harness
5              A- pillar paneling
6              Headliner
E14/ 1     Left sun visor with illuminated mirror
E14/ 2     Right sun visor with illuminated mirror
E14/ 1x1       Left mirror illumination connector
E14/ 2x1       Right mirror illumination connector




                                                                                                                                                P68.60- 0213- 05


Operation no. of operation texts or of standard texts and flat rates

Division       Operation       Operation text
               no.
P              685501          REPLACING LEFT INTERIOR SUN VISOR
P              685502          REPLACING RIGHT INTERIOR SUN VISOR




                               Removal, installation
1                              Remove paneling on A- pillar (5)                                                                   AR68.30-P-4050GH
2                              Remove roof frame grab handles (3)                    Open cover for grab handles, press both
                                                                               clips together and push grab handles upward.
                                                                               Pull out grab handles.
3                              Unclip sun visor mount (1) on roof frame
4                              Unscrew screws (2) from sun visor hinge on
                               roof frame
5                              Disconnect connector (E14/ 1x1, E14/ 2x1) of         Pull headliner down approx. 10 cm at corner
                               sun visor from roof wiring harness (4)           next to A- pillar.
                                                                                    Do not kink headliner.
6                              Remove sun visor (E14/ 1, E14/      2)
7                              Install in opposite order
ar9112p1100gh                                                               Page 1 of 2                                   Remove and install cover on bottom of rear seat




AR91.12- P- 1100GH                 Remove and install cover on bottom of rear seat                                                                      22.2.00
MODELS        163.136 / 154 /172 as of 1.9.99,
                         1
163.113 / 128 /157 / 174 / 75




                                                                                                                                                      P91.12- 2189- 09
Arrows   Pushing directions for releasing the
         locating tabs




                             Remove
                            Risk of breakage! Carefully press covers off
                            with a short screwdriver or suitable long wedges.

1                           Remove rear cargo space floor flaps                       See Operating Instructions
2                           Remove rear cover (A)                                      Pull front outer edges of the cover upwards
                                                                                 in order to release the locating tabs (1). Press
                                                                                 outer locating tabs (2) outwards. In the center
                                                                                 of the cover, press locating tab (3) to the right
                                                                                 and locating tab (4) forwards. In order to release
                                                                                  the locating tabs (5), press the cover down and
                                                                                 remove to the rear.
3                            Remove curtain at front 40 % bench
4                           Remove outer cover (B) from 40 % bench                     Press the cover in and pull upwards at
                                                                                 locating tab (6). Pull outwards at locating tabs
                                                                                 (7, 8). Press the cover forwards in order to
                                                                                 release the locating tab (9). At locating tab (10),
                                                                                 press down with a long wedge between the
                                                                                 covers. Guide the cover past the lateral curtain.

5                           Remove inner cover (C) from 40 % bench                     Pull the outer rear corners of the cover up
                                                                                 in order to release the rear locating tabs (11). In
                                                                                 order to release the locating tabs (12), press the
                                                                                  cover forwards and remove to the front.
6                           Remove curtain at front 60 % bench
7                           Remove outer cover (D) from 60 % bench                     Push locating tab (13) up and turn cover out
                                                                                  and up at locating tab (14). Pull outwards at
                                                                                 locating tabs (15). Press the cover forwards in
                                                                                 order to release the locating tabs (16). At
                                                                                 locating tab (17) press down with a long wedge
                                                                                 between the covers. Guide the cover past the
                                                                                 lateral curtain.
8                           Remove inner cover (E) from 60 % bench                     Press locating tabs (18) in. Pull the outer
                                                                                 rear corners of the cover up in order to release
                                                                                 the rear locating tabs (19). In order to release
                                                                                 the locating tabs (20), press the cover forwards,
                                                                                  rotate counterclockwise and remove past the
                                                                                 springs towards the rear.
                             Install
9                           Install inner cover (E) at 60 % bench                     Insert cover past the springs from the rear
                                                                                 and rotate into position in a clockwise direction.
                                                                                 Insert locating tabs (19). Press the front cover
                                                                                 down and reset so that locating tabs (20)
                                                                                 engage. Press rear cover down until locating
                                                                                 tabs (18) engage.
ar9112p1100gh                                           Page 2 of 2                                    Remove and install cover on bottom of rear seat




10              Install outer cover (D) at 60 % bench              Guide the cover past the lateral curtain.
                                                             Insert locating tab (17), push front cover down
                                                             and reset so that locating tabs (16) engage.
                                                             Press the outer edge of the cover down and
                                                             insert lateral locating tabs (15). Raise rear cover
                                                              on the inside, press down until locating tab (14)
                                                             and rear locating tab (13) engage.
11              Install curtain at front 60 % bench
12              Install inner cover (C) at 40 % bench              Insert cover from the front and insert
                                                             locating tabs (11). Press the front cover down
                                                             and reset so that locating tabs (12) engage.
13              Install outer cover (B) at 40 % bench              Guide the cover past the lateral curtain.
                                                             Insert locating tab (10), push front cover down
                                                             and reset so that locating tab (9) engages.
                                                             Press the outer edge of the cover down and
                                                             insert lateral locating tabs (8). Insert locating tab
                                                              (7), push cover down at locating tab (6) and
                                                             engage.
14              Install curtain at front 40 % bench
15              Install rear cover (A)                             Insert cover from the rear and press down
                                                             and forwards so that locating tabs (5) engage.
                                                             Press front ends of the cover down, so that
                                                             locating tabs (2, 3, 4) engage. Insert locating
                                                             tabs (1) into covers (C, E).
ar9112p1010gi                                                                        Page 1 of 1                                                   Remove and install bench




AR91.12- P- 1010GI                      Remove and install bench                                                                                           21.3.00
MODELS        163.136 / 154 /172 as of 1.9.99,
                         1
163.113 / 128 /157 / 174 / 75
40 % bench seat

 1     Bolts, front of rear seat fastening
2      Bolts, rear of rear seat fastening
4      Seat frame covering




                                                                                                                                                         P91.12- 2126- 06




                                  Remove, Install
1                                Remove headrest                                               See Operating Instructions
2.1                              Remove covering (4) on bottom of rear seat                    On 40 % rear seat only.                        AR91.12-P-1100GH
3.1                              Disconnect plug to seat belt buckle cable                      Only with side airbag in the rear (left and
                                                                                          right), code 293.
4.1                              Remove electric lead attached to seat frame                    Only with side airbag in the rear (left and
                                 with adhesive tape                                       right), code 293.
                                                                                                Installation: Replace adhesive tape.
5                                Unscrew bolts (1) on front of rear seat fastening              Installation: Replace bolts and nuts with
                                                                                          locking agent applied.
                                                                                               Torx bit set                                   *000589011000
                                                                                                                                              *BA91.12-P-1005-03A
6                                Release backrest and tip forward                              See Operating Instructions
7                                Release seat bench and fold down                              See Operating Instructions
8                                Remove bolts (2) on rear of rear seat fastening                Installation: Replace bolts and nuts with
                                                                                          locking agent applied.
                                                                                               Torx bit set                                   *000589011000
                                                                                                                                              *BA91.12-P-1005-03A
9                                Remove 40 % bench
10                               Install in the reverse order



      Rear seats

 Number                           Designation                                                              Model 163
                                                                                                           as of 09/ 99



 BA91.12- P- 1005- 03A            Nuts for rear seat console on vehicle floor                       NM     40




            000 589 01 10 00

               Torx bit set

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:68
posted:5/12/2010
language:English
pages:9