Get documents about "SPRING 2006pub _Read-Only_
Document Sample
Fiberglass Services, Inc
SPRING 2006
Retail Catalog
Fiberglass Materials and Supplies
♦ Epoxy
♦ Resin
♦ Gelcoat
♦ Mat
♦ Woven Roving
♦ Biaxial
♦ Acetone
♦ Styrene
♦ Brushes
♦ Rollers
♦ Tools
We match
Gel Coat!
Phone (941) 923-8112 ● (800) 226-8112 ● Fax (941) 923-2133
5612 Lawton Dr. • Sarasota • Florida • 34233
www.fiberglassservices.com
I-75 South to exit 205 • west on Clark Rd.• turn north on Lawton Dr.
L O C A L D E L I V E R Y & N AT I O N W I D E S H I P P I N G
D o - I t - Yo u r s e l f e r s o r P r o f e s s i o n a l B o a t B u i l d e r s
MASTERCARD & VISA gladly accepted.
Due to a fluctuating market, all prices are subject to change without notice.
TABLE OF CONTENTS
Solvents, Thinners, Additives…………………………………………………………..3
Resin………………………………………………………………………………………..4,5
Fillers, Putties & Compounds……………………………………………………...6,7,8
Gelcoats………………………………………………………………………………….…..9
Buffing compounds……………………………………………………………………...10
Tooling, Mold Making……………………………………………………………….11,12
Fiberglass Materials……………………………………………………………………..13
Dynamis Products………………………………………………………………………..14
Coring Materials………………………………………………………………………….15
Paints & Paint Products…………………………………………………………...16-19
Spray Equipment………………………………………………………………………...20
Sandpaper & other supplies……………………………………………………...21,22
Accessories & Supplies…………………………………………………………….23-29
Order Form……………………………………………………………………………….30
(2)
SOLVENTS, THINNERS, AND ADDITIVES
ACETONE M.E.K. CLEANING SOLVENT
Solvent used for cleaning brushes, tools, etc. Use as a solvent or a reducer for Duratec products.
Quart $ 4.72 Gallon $ 14.67
Gallon $ 12.38
5 Gallon $ 55.97 MINERAL SPIRITS
55 Gallon $ market Use as a cleaner or a reducer.
CONTACT CEMENT CLEANER Quart $ 5.78
Whitaker Brand Gallon $ 10.02
5 Gallon $ 38.71
Gallon $ 9.33
STYRENE
Use to thin polyester resin, also use to thin gelcoat
for spraying (maximum 20%).
DENATURED ALCOHOL
Recommended as a solvent and Pint $ 5.00
cleaning agent for all epoxies. Quart $ 6.67
Gallon $ 20.00
Quart $ 5.33 5 Gallon $ 74.77
Gallon $ 9.67
5 Gallon $ 42.44
ADDITIVES
55 Gallon $ market
PATCH AID ACCELERATOR
Slow or Fast
EPOXY THINNER # 778
Whitaker Brand Pint $ 12.02
Quart $ 19.98
Gallon $10.00 Gallon $ 64.55
SANDING AID/SURFACING AGENT
Add to final coat of gelcoat for a
FIBERGLASS PAINT STRIPPER hard, tack-free finish.
Removes old paint from fiberglass without
damaging the gelcoat. 2 oz. $ 2.22
4 oz. $ 3.31
Quart $ 9.30 Pint $ 6.25
Gallon $ 28.30 Quart $ 9.50
Gallon $ 22.06
5 Gallon $ 92.96
LACQUER THINNER WEBBING SOLUTION
Use as a solvent or a reducer. Add to gelcoat to create a splatter or
Quart $ 5.43 a spider web effect.
Gallon $ 8.71 Pint $ 8.00
5 Gallon $ 36.47 Quart $ 12.60
Gallon $ 35.00
(3)
RESIN
GP-200 LO PROFILE RESIN
This resin features the best of both worlds, Top quality blended resin. High strength and
excellent low shrinkage formulations without excellent bonding. Low shrinkage. Good for
the inherent brittleness associated with straight skincoats, tooling, close-tolerance parts.
DCPD’s and custom for any fabrication needs.
Quart $ 11.89
Quart $ 9.22 Gallon $ 24.55
Gallon $ 20.58 Pail $103.95
Pail $ 89.59 Drum $ market
Drum $ market
ISOPHTHALIC RESIN VINYLESTER RESIN
Best polyester resin available. Excellent bonding and higher water resistance.
Higher strength and resists most chemicals. Eliminates most blistering.
Many times used as a tooling resin.
Gallon $ 51.86
Gallon $ 25.00
Pail $ 208.63
Pail $ 99.22
CLEAR CASTING RESIN FIBERLITE 800 RESIN
Use for solid pouring and casting. Good quality general purpose resin.
Polyester, water-clear. Good bond between layers of glass,
fast wet out, high strength.
Quart $ 17.06
Gallon $ 42.00 Drum $ market
Pail $ 179.54
METHANOL
BAR TOP KLEAR- KOTE EPOXY Mist over the bar top epoxy to
When a clear, hard finish is needed on tables or remove any air bubbles.
bar tops or decoupage. Can be used for
Pint $ 4.44
laminating, adhesive, or repairs.
Gallon $ 6.00
Easy 1-1 mix ratio. Work time 45-60 minutes.
Total cure time is 24-48 hours.
2-Pint kit $ 14.52 Ask us about our great
2-Quart kit
1-Gallon kit
$
$
22.58
38.89
new line of paint
2-Gallon kit $ 64.44 “Brilliance”
10-Gallon kit $ 282.92
from Insignia!
(4)
RESIN
PRO TECH MINI-PUMPS
Calibrated to measure just the right
amount of resin and hardener.
Gallon Set $ 14.74
5 Gallon Set $ 15.54
PRO SEAL MARINE EPOXY COATING
Provides a good chemical and moisture
resistance making it an ideal choice for interior PRO BUILD EPOXY RESIN
or exterior use. Can be applied with a brush or
roller. Available with fast or slow hardener. Convenient, easy to use 3 to 1 ratio. Use for
building, repairing, or restoring any type of
marine vessel. Low viscosity allows for better
wet-out resulting in lighter, stronger, void free
RESIN HARDENER parts without run-out on vertical surfaces.
Pint N/A $ 9.29 Hardener available in slow, medium, and fast.
Quart $ 17.03 $ 22.50
Gallon $ 50.51 $ 63.68
Pail $ 251.22 $ spec order RESIN HARDENER
Drum $ spec order $ spec order Pint N/A $ 9.29
Quart $ 17.03 $ 22.50
Gallon $ 50.56 $ 63.68
Pail $ 251.22
Drum SPEC ORDER SPEC ORDER
EA-607 ULTRA GRIP KEEL ADHESIVE
Bonds lead keels to fiberglass hulls without
the risks of cracking and separation.
Thixotropic, ideal for bonding. URETHANE MOLD MAKING MATERIAL
Easy 1-1 mix ratio. (15-20 MIN) By Adtech Plastics
LUC-4102
Quart kit $ 46.66
SUPER LOWEX-FAST, RIGID (5 min.)
Gallon kit $ 167.98
Fast, safe, and easy for same day tooling.
Quart kit $ 28.51
Gallon kit $ 88.80
ULTRA-FAIR 861
Use for filling and fairing large surface LUC-4105
imperfections in aluminum, steel, LOWEX- “SLOW” REPRODUCTION (13 min.)
wood or fiberglass. Exceptional duplication with a tough,
Easy 1-1 mix ratio. (40-55 MIN) durable surface.
2 Quart kit $ 76.51 Quart kit $ 29.60
2 Gallon kit $ 154.48 Gallon kit $ 94.97
4 Gallon kit $ 236.49
(5)
FILLERS, PUTTIES & COMPOUNDS
Cream hardener included with all of the filler products below.
#11 (TYPE II) #14 ULTRA FILLER
Fibrous filler with reinforcing strength. Smooth and creamy, excellent
Excellent bond, effective for rebuilding areas adhesion to most substrates.
with voids or breaks. (4-6 MIN.) Can be finished to a feather edge. (4-6 MIN)
Quart
Gallon
Cartridge
} Special Order
Quart
Gallon
$ 16.23
$ 56.82
#17 HIGH HEAT RESISTANT #29 AIR DRY PIT FILLER
Used in tooling, fabrication, and repair in
aerospace and automotive industries. Smooth, creamy, single component that dries
Excellent bond, will accept gel coat or paint. within minutes. Ideal for small surface
(4-6 MIN) (temp up to 446°) imperfections.
Quart $ 18.73 16 oz. $ 14.47
Gallon $ 59.39
Cartridge $ 147.36
#77 HIGH-HEAT RESIST FILLER
FAIRING COMPOUND
Used in a variety of applications, easily sanded
to a feather edge.Heat resistance to 446°,
#78 HIGH HEAT RESIST FILLER accepts any type of finish coat.
FAIRING COMPOUND (5 MIN)
Same general characteristics as #77, but much Quart $ 16.70
lower density and much longer worklife. Gallon $ 59.99
(40-50 MIN) Cartridge $ 141.06
Quart $ 16.70
Gallon $ 59.99
CREAM HARDENER
Cartridge $ 141.06
1 OZ. $ 2.50
4 OZ. $ 4.00
(6)
FILLERS, PUTTIES & COMPOUNDS
CABOSIL CHOPPED GLASS FIBERS
Add to resin to thicken or make a putty. 1/4” long glass strands.
Quart $ 3.53
Gallon $ 5.92 1 lb. $ 4.00
2 Gallon $ 8.83 2 lb. $ 7.00
5 Gallon $ 21.11 5 lb. $ 14.55
10 lb. $ 64.24 50 lb. $ 99.49
MILLED GLASS FIBERS PHENOLIC MICRO BALLOONS
Add to resin to make a strong filler or putty. A popular filler for epoxies to reduce density
and improve impact and compression strength.
1 lb. $ 4.90
2 lb. $ 7.22 Quart $ 7.93
5 lb. $ 14.90 Gallon $ 25.20
10 lb. $ 26.90 5 Gallon $ 109.41
50 lb. $ 99.99
TALC Q-CELL (MICRO BALLOONS)
Add to gelcoat to make a sandable putty.
Add to resin to make a lightweight filler.
1 lb. $ 2.22
1/2 lb. $ 5.00
5 lb. $ 6.20
1 lb. $ 8.60
10 lb. $ 11.00
2 lb. $ 15.50
50 lb. $ 20.00
5 lb. $ 31.00
10 lb. $ 54.99
DURATEC PRODUCTS
DURATEC SANDING PRIMER
Builds rapidly and provides an easily sanded,
low porosity, smooth surface.
Adheres to fiberglass, wood, brick, concrete,
properly prepared metal, polyurethane foam
and most epoxies.
DURATEC SURFACING PRIMER
Rapid coat build-up for plugs and
DURATEC HI-GLOSS CLEAR
Master Molding surfacing.
Buffs and polishes beautifully. Mix 50/50 with gelcoat for a
beautiful high-gloss finish.
Quart $ 20.91
Gallon $ 64.38 Quart $ 24.33
Gallon $ 74.58
(7)
PUTTIES AND FILLERS
AMERICA’S CUP MARINE FILLER
Use on wood, fiberglass, and metal boats.
Water resistant, tough and will not shrink.
(hardener incl.)
Quart $ 18.00
Gallon $ 42.50
CORE BOND 4001
Provides high strength bond
DURAGLASS between the laminate and the core.
Contains glass fibers, use when extra (wood, balsa, or PVC)
strength is needed. (hardener incl.)
Quart $ 16.49 5 Gal $103.49
Gallon $ 36.66
ARJAY 6011
ARJAY 2001 BONDING PUTTY POURABLE CERAMIC TRANSOM
General purpose polyester bonding Polyester.
and filling material. Successfully being used as a core material
Quart $ 10.28 in powerboats.
Gallon $ 28.33
5 Gallon $100.55 Gallon $ 28.66
5 Gallon $100.55
ARJAY FAIRING COMPOUND
FLOTATION FOAM
Available in summer weight (1301) &
2 LB. DENSITY
winter weight (1201). For use in large Use for floatation and strength under floors and
masses w/out cracking. to fill voids. A 2 Quart kit will yield 2 cubic feet
General tooling applications and filling of foam. Easy 1-1 mix.
small pinholes and scratches.
2 Quart kit $ 21.39
Quart $ 11.31
2 Gallon kit $ 60.14
Gallon $ 32.36
10 Gallon kit $ 262.98
5 Gallon $115.54
4 LB. DENSITY
BODYFILLER (BONDO) Coast Guard required for installing fuel tanks.
Lightweight, smooth and creamy. A 2 Quart kit will yield 1 cubic foot of foam.
Easy to sand. (hardener incl.) Easy 1-1 mix.
Quart $ 8.50 2 Quart kit $ 22.89
Gallon $ 14.44 2 Gallon kit $ 61.35
10 Gallon kit $ 265.97
(8)
GELCOATS
WHITE EXTERIOR GELCOAT NEUTRAL EXTERIOR GELCOAT
No wax added. No wax added.
Use in molds. Strong bond to resin and glass. Pigment to make dark rich colors.
Add surface agent to final coat for a Add surface agent for tack-free finish.
tack-free finish. Add pigment for pastel colors. Quart $ 14.60
Gallon $ 34.20
Quart $ 14.33 Pail $ 145.73
Gallon $ 33.51
Pail $138.84 BLACK EXTERIOR GELCOAT
No wax added.
CLEAR EXTERIOR GELCOAT Use in molds, add surface agent to
No wax added. final coat for a tack-free finish.
Use with pigment or metal flake.
Quart $ 15.52
Add surface agent for tack-free finish.
Gallon $ 47.53
Quart $ 17.04 5 Gallon $ 205.22
Gallon $ 42.71
Pail $ 181.98 PIGMENTS
Used to tint gelcoats to make different colors.
WHITE INTERIOR GELCOAT Available in Black, Brown, White, Yellow,
Final finish on fiberglass repairs. Mustard, Red, Blue and Green.
Contains extra fillers and surface agent for a
2 oz. $ 5.00
hard tack-free surface.
4 oz. $ 6.50
Add pigment for pastel colors.
Quart $ 15.50
Gallon $ 37.51 NON-SKID PRODUCTS
Pail $ 149.37 GLASS BEADS
Make non-skid panels in decks and floors.
Sprinkle generously onto wet gelcoat.
MEK-P (HARDENER)
Pint $ 6.67
Available in 30% or 50% - Red or Clear
Quart $ 9.17
Gallon $ 27.78
2 oz. $ 2.52
6 oz. $ 5.00
SKID X
Pint $ 7.69
Plastic particles mixed into gelcoat and rolled
Quart $ 13.89
out with a short-nap roller.
Gallon $ 31.74
Pint $ 7.22
Gallon hi-point 90 $ 31.74
Quart $ 10.55
Gallon $ 32.22
GIBCO FLEX MOLD
Use in molds or for repairs.
Available in many patterns, special order only.
Call for prices.
(9)
BUFFING COMPOUNDS
All PARKO Products : Quart $ 8.55
Gallon $ 21.18
TIGREKUT - Use to remove primer over
spray, surface stains, and medium orange peel,
Coarse buffing compound.
BLAST OFF - Use to remove 600-800 grit
scratches, and stubborn surface marks from
fiberglass and metal.
FAST CUT - Extra course compound for
removing the toughest imperfections.
PARKO 2500 - All in one glaze removes swirl
marks and light scratches. Quart 8.70
AQUABUFF 1000 - by Duratec
Use to remove scratches and polish composite
patterns, plugs, and molds.
AQUABUFF 2000 - by Duratec
Use to remove swirl marks
for the ultimate finish.
Quart $ 13.02
Gallon $ 37.24
2 Gal $ 64.47
MEGUIAR’S #1 MACHINE CLEANER
Use to remove normal mold
imperfections by machine.
BUFFING PADS
16 oz. $ 11.51
COMPOUND & POLISH
64 oz. $ 29.89
MEGUIAR’S #3 MACHINE GLAZE Single sided $ 10.70
Use to create maximum high gloss by machine. Double sided $ 17.42
16 oz. $ 12.79 Foam $ 14.50
64 oz. $ 30.86
(10)
TOOLING AND MOLD MAKING SUPPLIES
MEGUIAR’S #8 MOLD RELEASE
To obtain the maximum number of “pulls”
per coat of wax.
11 oz. Can $ 12.74
MOLD RELEASE
PART-ALL #2 GREEN WAX
Use on molds prior to application of parting REGULAR 14 oz. $ 12.39
film, or as a general purpose parting
agent,especially on molds where standard sili- HI TEMP 14 oz. $ 12.39
cone waxes hinder post-finishing operations.
1.5 lb. $ 9.78
7 lb. $ 28.50
TR-210 SELF-STRIP LIQ. MOLD RELEASE
25 lb. $ 88.51 Gallon $ 39.60
TR-214 LIQUID MOLD RELEASE
PVA PARTING FILM #10 Gallon $ 41.36
Use with #2 green wax.
Can be brushed or sprayed. Water-soluble. TR-216 HI TEMP LIQ. MOLD RELEASE
Quart $ 7.09 Gallon $ 35.06
Gallon $ 18.84
Pail $ 79.55 TR-301 SEALER GLAZE
Gallon $ 40.06
DYKEM LAYOUT FLUID
TR-305 EXTRA HEAVY DUTY CLEAN
Dries to the touch in 2-4 minutes.
Prevents glare and resists cutting fluids, Gallon spec. order
moisture, grease, gasoline,
And petroleum solvents. TR-502 WAX BUILD UP REMOVER
White & Blue Pint $ 11.55 Gallon $ 28.02
White & Blue Quart $ 19.90
White Gallon $ 52.19
ORANGE TOOLING GELCOAT
SILICONE RUBBER Quart $ 17.38
MOLD MAKING MATERIAL Gallon $ 56.21
5 Gallon $ 227.98
20 oz. $ 37.56
10 lb. $ 172.32
WEDGES - DEMOLDING
White rigid wedges or pink flexible wedges
SYN-LUBE #531
Silicone rubber release agent (aerosol) 4” $ 2.00
6” $ 2.76
14 oz. $ 19.20
10” $ 5.50
(11)
TOOLING AND MOLD MAKING SUPPLIES
SHEET WAX REXCO Formula Five Mold Release
Available in various sizes, with or without adhe- Silicon based paste wax that provides
sive. Prices vary depending on size and thick- positive multiple releases.
ness. Call for prices.
Each $ 10.11
FILLET RADIUS TOOLS - By Master
Designed for installing wax and leather fillets,
accurately sized, produce a smooth radius when CLAY - Permoplast
used properly. Hard chromed for long wear. odorless, non-toxic modeling clay.
Stick $ 1.17
1/16” - 1/8” no. 1 $ 26.60 5 lb Box $ 19.30
3/16” - 1/4” no. 2 $ 28.39 Klean Klay 1 lb Box $ 4.40
5/16” - 3/8” no. 3 $ 31.05
1/2” - 5/8” no. 4 $ 33.75
Set of all four $ 107.79
EPOXY PRODUCTS
E-BOND UNDERWATER PUTTY
Easy 1-1 mix.
2 Quart kit SPECIAL ORDER
WEST SYSTEM BRAND EPOXY
Cures to a high-strength plastic, solid at room
temperatures. By mixing specific proportions of
resin and hardener.
WEST SYSTEM MINI-PUMPS
105 205/206
RESIN HARDENER Available in
Pint N/A $ 18.34 5-1 ratio, for quart and gallon sizes.
Quart $ 35.50 $ 34.13
Gallon $ 87.96 Spec. Order $10.00
Pail Spec. Order N/A
(12)
FIBERGLASS MATERIALS
BIAXIAL– 1708 ( +/- 45 ) CHOP GUN ROVING
per yard per pound/ roll
$1.10 per pound
6” width $ 2.00 $ 3.00
Price breaks on larger quantities.
12” width $ 3.00 $ 3.00
Call for price.
50” width $ 9.50 $ 2.46
FIBERGLASS CLOTH
FABMAT
per yard
24 oz. Woven roving with a 1.5 oz backing
4 oz. X 50” $ 7.55
per yard per pound/ roll 6 oz. X 50” $ 7.67
6” wide $ 2.00 $ 2.00 7.5 oz. X 50” $ 8.13
12” wide $ 2.90 $ 2.00 10 oz. X 50” $ 8.30
50” wide $ 9.00 $ 2.00
FIBERGLASS MAT
FIBERGLASS CLOTH TAPE - 9 oz. Chopped strand mat
per yard 50 yard roll per yard per pound/ roll
1” tape $ .81 $ 13.81 3/4 oz. X 50” $ 2.90 $ 1.70
2” tape $ 1.11 $ 19.69 1.5 oz. X 50” $ 3.60 $ 1.69
3” tape $ 1.41 $ 26.20 2 oz. X 50” $ 4.00 $ 1.90
4” tape $ 1.61 $ 33.61
6” tape $ 2.01 $ 50.87
SURFACE VEIL - 50” width
FIBERGLASS MAT TAPE - all 1.5 oz. per yard per roll
$ 2.30 $ 283.57
per yard per pound/ roll
4” wide $ 1.17 $ 1.69
6” wide $ 1.28 $ 1.69 WOVEN ROVING
8” wide $ 1.39 $ 1.69
10” wide $ 1.50 $ 1.69 per yard per pound/roll
$ 5.90 $ 1.60
12” wide $ 1.61 $ 1.69
Come visit us at local
area Boat Shows
throughout the year.
Get great advice and
discount coupons!
(13)
DYNAMIS PRODUCTS
Epoxy Compounds
These epoxy marine laminating
systems are all high strength,
100% solids low viscosity systems
with excellent wetting and
anti-sag qualities. The GP Gel Systems are
extremely versatile, easy to use,
All laminating 1:1 mix, epoxy, non-sag mastic systems.
systems are formulated with
easy-to-use 2:1 mix, by volume, DYNAPOX
and provide thin film cures. GP GEL 20 18—20 minutes
GP GEL 35 30—35 minutes
DYNAPOX EPO COAT CT– 100 Qt. $ 20.30
Coal Tar Epoxy - a non-flammable 100% solids, 2 Qt. $ 28.70
easy to use, coal tar modified, corrosion Gal. $ 44.10
resistant marine coating. 2 Gal. $ 81.00
1:1 Pint $ 14.73
1:1 Qt. $ 26.75 DYNAPOX EPO COAT GP-100
1:1 2 Gal. $ 75.93
EPO Coat GP-100 is a non-flammable,
100% solids, easy to use general purpose
DYNAPOX marine coating.
LAM-10 10 -12 minutes
Available in Black, Gray, White, Tan, Blue
2:1 3 Pint $ 24.99
2:1 3 Qt. $ 41.77 2:1 1.5 Pt. $ 27.10
2:1 3 Gal. $ 140.87 2:1 3 Qt. $ 55.69
2:1 3 Gal. $ 165.63
LAM-30 30 -35 minutes
2:1 3 Pint $ 25.63
2:1 3 Qt. $ 43.00 EPO GEL 2004
2:1 3 Gal. $ 145.59
2 part component with the
LAM-60 60 -75 minutes consistency of Vaseline.
Clear color, easy 1-1 mix.
2:1 3 Pt. $ 26.00
2:1 3 Qt. $ 43.74 8 oz. kit $ 7.82
1 QT kit $ 20.60
2:1 3 Gal. $ 148.43
1 Gallon kit $ 60.05
(14)
CORING MATERIALS
COOSA BOARD
This high strength polyurethane panel is a light-
weight, glass reinforced and is typically used for
bulkheads, decking, transoms and stringers.
PLASCORE
Polypropylene honeycomb core,
15# Boards: 4X8
use instead of wood, when a
1/4” $ 132.38 lightweight and durable panel is needed.
3/8” $ 148.71 Available in a variety of thickness’.
1/2” $ 156.27 Sheets are sold with a bonding material and
3/4” $ 182.44 need to be laminated with fiberglass mat.
1” $ 261.09 Can be cut to shape with a razor knife,
prior to laminating.
24# Boards: 4X8
3/4” $ 245.80 Sheet size is 4’ X 8’.
THICKNESS PRICE 10 PLUS
1/4” $ 61.93 $ 55.74
URETHANE SHEET FOAM 3/8” $ 63.68 $ 57.31
1/2” $ 66.55 $ 58.90
This is a non-structural foam used for a 5/8” $ 76.11 $ 68.50
coring when insulation is needed such as 3/4” $ 79.85 $ 71.87
coolers and ice boxes, also used for 1” $ 98.33 $ 88.50
1 - 1/2” $115.56 $104.00
sound barrier. R values vary depending 2” $ 159.39 $ 143.45
on thickness.
SHEET SIZE THICKNESS PRICE
MICHIGAN COMPOSITES
4’ X 8’ 1” $ 33.93
4’ X 4’ 1” $ 22.95 TUFF-STUFF Marine Board is made of rigid,
2’ X 4’ 1” $ 14.98 structural polyurethane and is available in
4’ X 8’ 2” $ 71.49 selected densities to replace wood in boats.
4’ X 4’ 2” $ 41.22 TUFF-STUFF Marine Board possesses qualities
2’ X 4’ 2” $ 24.55 superior to many competitive products available
to the boat building industry today.
MATLINE COREMAT SHEETS ARE 4X8
Used as a core when sandwiched between 2
layers of mat. Lighter, stronger and quicker ITEM# DEPTH WEIGHT PRICE
build than an all glass laminate. TS48500-10 1/2” 14# $ 96.26
TS48500-14 1/2” 19# $ 109.19
per yd (39” W) per roll TS48750-10 3/4” 20# $123.13
TS48750-14 3/4” 28# $142.04
3mm $ 7.81 $ 333.50 TS48750-24 3/4” 48# $199.78
4mm $ 9.25 $ 335.64
(15)
PAINTS and PAINT PRODUCTS
Polyester and Acrylic Urethane Paints
Designed especially for the
Marine and Aircraft industries.
Available in a large variety of standard colors with custom color
matching available. Available in Primers and Topcoats.
Brilliance - Superior 2 component linear polyester urethane
technology for maximum gloss and durability.
Brilliance was developed for aerospace and marine environments
where the maximum in high performance coatings is desired.
♦ Unsurpassed dry times.
♦ Thru cure at low temperatures.
♦ Superior UV resistance.
♦ Highest initial gloss.
♦ Excellent color retention.
(16)
PAINTS and PAINT PRODUCTS
COLORS
PINT QUART GALLON
WHITES Really White, Off White $ 39.86 $ 117.00
Matterhorn White
Vestal White, Creamy White
Snow White, Bright White
Chevron White, Oyster White
Marathon White
GRAYS Whisper Gray, Nordic Gray $ 41.33 $ 122.01
Light Gray/Gamma Gray
Medium Gray, Viking Gray
Graystone, Stone Gray
Kingston Gray
BLUES Bahama Blue, Aristo Blue $ 44.96 $ 134.40
Midnight Blue
Colonial Blue, Royal Blue
Bristol Blue, Sky Blue
GREENS Jade Mist Green $ 50.54 $ 152.28
Kelly Green
YELLOWS Federal Yellow $ 49.25 $ 148.09
Chrome Yellow
Wildcat Yellow
REDS & Orange $ 58.12 $ 152.28
ORANGE Deep Red
Candy Apple Red
Vivid Red
Sunfast Red
Toreador Red
TANS Sandalwood Tan $ 43.10 $ 123.01
Moon Dust, Light Ivory
Light Beige
SPRAY CATALYST Brilliance 0024 $ 41.97 $ 127.95
BRUSH CATALYST Brilliance 0224 $ 26.50 $ 53.00 $ 127.95
(17)
PAINTS and PAINT PRODUCTS
PRIMERS
PRICE
8545 Gray Gallon $ 82.32
Quart $ 24.15
9545 White Gallon $ 88.20
Quart $ 25.62
Catalyst Gallon $ 73.50
Quart $ 21.94
High Build Gallon $ 88.20
Quart $ 25.62
HB Catalyst Gallon $ 88.20
Quart $ 25.62
Ultra High Build Gallon $ 112.89
Quart $ 31.79
Ultra HB Catalyst Gallon $ 95.25
Quart $ 27.38
REDUCERS:BRILLIANCE
PRICE
Fast 60* - 70* Gallon $ 44.10
Quart $ 16.00
Medium Fast 70* - 80* Gallon $ 44.10
Quart $ 16.00
Medium Slow 80* - 90* Gallon $ 49.00
Quart $ 18.00
Slow 90* - 100* Gallon $ 53.90
Quart $ 20.00
Primer Reducers: FORTRESS
T009 75* and lower
Fast Gallon $ 47.04
Quart $ 18.00
T003 75* and higher
Slow Gallon $ 47.04
Quart $ 18.00
Prep Cleaner Gallon $ 29.40
(18)
PAINTS and PAINT PRODUCTS
WE MATCH
GELCOAT!
AWLGRIP PRODUCTS
(Some of the following are special order items, usually available the following day.)
AWLCARE-Protective Polymer Sealer Pint $ 16.23
AWLGRIP URETHANE TOPCOAT- Available in a variety of colors, a very
durable coating system to protect against harsh marine elements.
AWLCAT #2 SPRAYING CATALYST Quart $ 59.61
AWLCAT #3 BRUSHING CATALYST Pint $ 42.63
AWLGRIP T0003-SPRAY REDUCER Quart $ 15.26
AWLGRIP T0006-STANDARD REDUCER Quart $ 13.73
AWLGRIP T0031-BRUSHING/SLOW REDUCER Quart $ 20.50
AWLGRIP 545 PRIMER BASE White Quart $ 38.54
Gray Quart $ 31.82
AWLGRIP 545 PRIMER CATALYST Quart $ 35.31
AWLWASH CONCENTRATE-Non-abrasive cleaner Quart $ 15.35
KIRKER PAINT SYSTEMS
Paint your boat, car or truck! Kit includes primer, acrylic enamel paint, reducer, and
catalyst. Available in 42 different colors, in quarts or gallons.
Prices start at $ 89.95
(19)
SPRAY EQUIPMENT AND SUPPLIES
SPRAY GUN with Dripless Cup
High production spray gun is designed for
heavy duty automotive spraying of all
refinishing materials including acrylics, enamels,
lacquers, primers, stains, urethanes and
varnishes. The one-quart cup features an
internal breather tube for dripless spraying.
$ 32.00
DETAIL GUN AND CUP
Use for small repair jobs when a quart cup is
too big. Perfect when webbing the inside of a
boat. Use 30-50 psi air pressure.
Cup size is 8 ounces.
Spray Gun Maintenance Kit
$ 23.52 $ 9.60
DUAL CARTRIDGE RESPIRATOR
Respiratory protection against
airborne contaminants.
07192/07193
MED/LARGE $ 25.50
Organic Vapor/P95 Assembly
DESCRIPTION PRICE
Air Adjusting Valve with Gauge $ 14.10
Brass Air Regulator $ 5.10
Dandi-Liners (1 qt. Spray Cup Liners)
$ .30
each
Dandi-Liners (1 qt. Spray Cup Liners) THE PROFESSIONAL
$ 7.78 PORTABLE SPRAYER PRICE
40 pk.
Disposable Moisture Filter $ 7.60 Complete Unit $ 4.50
Complete Unit/12 case $ 47.50
Internal Repair Kit $ 11.70 Power Unit only $ 3.70
Power Unit /12 case $ 38.90
Spray Gun Cleaning Kit $ 9.60 Replacement Jar $ 1.50
Spray Gun Maintenance Kit $ 11.70
(20)
SANDPAPER AND OTHER SUPPLIES
BACK UP PADS DISKIT
3” Finesse-it Pad……...$ 9.40 Yellow Flexible Stick Pad
5” yellow polymer…...$ 3.40 5” $ 15.10
7” yellow polymer…...$ 4.80 6” $ 15.52
7” black nylon…………..$ 11.50 8” $ 22.20
DRAIN PLUGS AND DRAIN PLUG SLEEVES
CHEESEGRATER-10” 1/2 round $ 1.90 Various sizes and styles available.
DRUM PUMPS
DRUM WRENCH $ 12.00 plastic $ 16.60
DUST MASKS
DESCRIPTION PRICE PRICE BOX
IVY CLASSIC # 22150 $ 2.00 (5) $ 6.50/50 box
MOLDEX 2200 N95 $ 1.80 ea. $ 25.50/20 box
3M #07048 $ 1.70 ea. $ 21.90/20 box
3M #07185 $ 2.30 ea. $ 22.60/10 box
GRINDING DISCS
16 GRIT 16 GRIT 24 GRIT 24 GRIT 36 GRIT 36 GRIT 50 GRIT 50 GRIT
DESCRIPTION EACH BOX EACH BOX EACH BOX EACH BOX
3” $ 1.40 $ 29.60 $ 1.30 $ 27.30 $ 1.20 $ 24.60
5” $ 1.60 $ 28.00 $ 1.50 $ 26.50 $ 1.40 $ 26.00
7” $ 2.00 $ 38.00 $ 1.80 $ 36.00 $1.70 $ 35.50
(21)
SANDPAPER AND SUPPLIES
ROLOC DISC PAD ASSEMBLY 3M
3” $ 21.40
SANDING BLOCKS DUAL CARTRIDGE RESPIRATOR
07192/07193
5” $ 4.10 MED/LARGE
9” $ 8.00
$ 25.50
Organic Vapor/P95 Assembly
SANDPAPER SHEETS Respiratory protection against airborne
contaminants.
Available 40 grit to 80 grit in Soft & Dry,
and 100 grit to 2000 in Wet & Dry.
Priced individually or by the sleeve.
Packs contain either 50 or 100 pieces
depending on grit.
Prices vary.
AIRFILE PAPER
HOOKIT® GOLD FILM
Self-adhesive 2 3/4” X 16 1/2” airfile sheets, 3” Sanding Discs stocked in 80-320 grit.
stocked in 40 and 80 grit. Sold individually or by the box.
Sold individually or by the box. Prices vary depending on grit.
Prices vary depending on grit.
SCOTCH-BRITE ROLOC®
Surface Conditioning Discs 3”.
SANDING DISCS
Self-adhesive sanding discs, 5” and 6” discs are Sold individually or by the box.
stocked in 40 grit thru 400 grit.
Sold individually or by the box. SANDING SPONGE
8” Discs are stocked in 40 grit and 80 grit. Available in Very Fine and Super Fine,
Prices vary depending on grit and size of discs. 4 1/2” X 5 1/2”.
Sold individually or by the box.
SURFACE FINISHING PADS
Available in Fine and Ultra Fine, 6” x 9”. # 74 SPRAY ADHESIVE
Sold individually or by the box. Can be used in many applications.
16 oz. Aerosol can $ 12.40
(22)
ACCESSORIES EQUIPMENT AND SUPPLIES
E.C. Cutter
This unique, light weight cutter has
multiple uses in a fiberglass shop.
Excellent for cutting patterns, custom shapes
for RTM, and hand laid laminate. Both re-
chargeable battery and AC power makes it a
must for every composite shop. Includes two
blade assemblies.
Blade replacement in seconds.
Cuts fiberglass mat of all ounce up to 24 oz.
Cuts Kevlar and Carbon Fiber mat.
$ 101.09
Ergonomically designed to reduce repetitive DESCRIPTION
motion injuries. Resists accidental finger E.C. Cutter AC Adapter
injuries. Cuts Marine Vinyl effortlessly!
Modern, Carbon Fiber look handle. E.C. Cutter Rechargeable Battery
E.C. Cutter Blade Set
E.C. Cutter Blade Set with Shoe
Heavy Duty Bent Trimmers E.C. Cutter Battery Charger
These rigid over built 10 & 12" shears are 110V E.C. Cutter Transformer
perfect for the fiberglass industry. The knife 220V E.C. Cutter Transformer
edge design insures clean, crisp shearing
action for all fiberglass materials. Chrome
plated, tempered blades oversized contoured
bows with black enamel. Finest quality old
world construction. Manufactured specifically
for ES Manufacturing for the use and abuse of
the composite industry.
Kevlar Heavy Duty Trimmers
PRICE DESCRIPTION These are specially designed with serrated
10" Heavy Duty Knife Edge Bent blades to cleanly cut Kevlar. They are specially
$ 28.60 treated for long life against this hard to cut
Trimmer
material. Color coded handle.
10" Heavy Duty Knife Edge Left Hand
$ 36.30
Bent Trimmer
PRICE DESCRIPTION
12" Heavy Duty Knife Edge bent
$ 35.90 $ 60.79 10" Heavy Duty Kevlar Trimmers
Trimmer
(23)
ACCESSORIES EQUIPMENT AND SUPPLIES
Quick Release Aluminum
Solid end allows no resin or glass to
enter. Strong, galvanized steel
frames. Wood handles accept
extensions. Steel ferrules on all
handles to prevent cracking.
All roller frames feature a new
compact design.
Traditional straight groove (fin)
Aluminum Economy Rollers design. Available in our most
Steel retention screws for long life, easy
popular sizes. 1/4"
disassembly and fast cleaning. Strong, diameter frame on all sizes.
galvanized steel frames. Plastic handles Machined fin corners reduce glass
textured for non-slip grip and easy cleaning. fiber shearing.
Available in aluminum.
BLUE PLASTIC HANDLE
Great for all solvents including
Aluminum roller acetone and emulsifiers.
1/4" Dia. X 1.5" ……………………………..$ 7.78
1/4" Dia. X 3" ……………………………..$ 7.88
WOOD HANDLE
3/8" Dia. X 1.5" ……………………………..$ SPECIAL ORDER Aluminum roller
3/8" Dia. X 3" ……………………………..$ SPECIAL ORDER 1/2" Dia. X 3" …………………………...….$ 9.77
3/8" Dia. X 4.5" ……………………………..$ SPECIAL ORDER 1/2" Dia. X 4.5" …………………………….$ 11.97
3/8" Dia. X 2-3" 2-Piece ………………….$ SPECIAL ORDER 1/2" Dia. X 6" ………………………………..$ 12.39
1/2" Dia. X 1.5" ……………………………..$ 7.98 3/4" Dia. X 3" ……………………………….$ 10.08
1/2" Dia. X 3" ………………………………..$ 8.19 3/4" Dia. X 4.5" ……………………………...$ 12.08
1/2" Dia. X 4.5" ……………………………….$ 8.30 3/4" Dia. X 6" ……………………………….$ 12.60
1/2" Dia. x 2-3" 2-Piece …………………..$ 8.40 1.0" Dia. X 3" ………………………………..$ 10.19
3/4" Dia. X 3" ………………………………...$ 8.30 1.0" Dia. X 4.5" ……………………………..$ 12.18
1.0" Dia. X 3" …………………………………..$ 8.29 1.0" Dia. X 6" ………………………………..$ 12.92
(24)
ACCESSORIES EQUIPMENT AND SUPPLIES
This professional grade sprayer is a must for every
G100-6 Gelcoat & Resin Spray fiberglass, composite and cultured marble shop.
Gun (Cup Gun) This gun is used for spraying not only gelcoat and
resins, but other materials such as parting films,
spray gypsum, tooling gelcoats, sand able primers,
Complete with FN6 nozzles, lid, plastic granite enhanced gelcoats, adhesives and paints.
cup, paper cup and cup liner. With our largest nozzle, it will even sand blast. The
easy to clean design means clean up times less than
five minutes. Wipe the lid and nozzle, through away
$ 139.99 the cup, and you're ready to go again. We have also
designed the gun to work with standard paper cups.
G200-6 External Mix
Gelcoat & Resin Spray Gun
$236.38
This professional grade sprayer works like our
DESCRIPTION famous Model 100 but adds the convenience of
TRIGGER VALVE ASSEMBLY external mix. Several catalyst nozzles are available
TRIGGER/NEEDLE VALVE BODY "O" RING for a wide variety of catalyzation ratios. 8.5 oz
TRIGGER VALVE UPPER BODY "O" RING plastic catalyst container for monitoring of catalyst
TRIGGER VALVE STEM "O" RING usage. Adjustable spray angle to insure proper mix
AIR NOZZLE ASSEMBLY of catalyst and resin/gelcoat. Even easier to clean
AIR NOZZLE "O" RING design means clean up times less than five minutes.
Wipe the lid and nozzle, through away the cup, and
LOCK SCREW "O" RING
your ready to go again. This gun also designed to
LOCK SCREW ASSEMBLY W/ "O" RING
work with standard paper cups.
FLUID NOZZLE "O" RING
CAST ALUMINUM CUP LID
PULL RING SPRING
Our vacuum fed (not gravity) spray gun with flow
controls on both resin and catalyst air chambers for
PULL RING SPRING ASSEMBLY
proper ratio control. Our exclusive precision
NEEDLE VALVE ASSEMBLY
machined brass nozzles come in nine different Sizes
NEEDLE VALVE STEM "O" RING
and generate a fine atomized spray pattern on both
G100-GUN "O" RING REBUILD KIT resin and catalyst sides. Aluminum catalyst nozzle
PLASTIC LINER FOR REUSABLE CUPS (100 PACK) assemblies (CNA) made of chemical resistant 6063
aircraft grade aluminum. Aluminum construction
GRADUATED HEAVY DUTY PLASTIC CUP
insures long life and is superior to its competitors in
1/32" (0.8MM) FLUID NOZZLE $10.00 every way. Built in convenient flow controls
1/16" (1.6MM) FLUID NOZZLE $10.00 (needle valve design) on both resin and catalyst
3/32" (2.4MM) FLUID NOZZLE $10.00 sides for precise metering of resin/gelcoat and
catalyst volume. Long life EP O rings are resistant to
1/8" (3.2MM) FLUID NOZZLE $10.00
solvents. Comes complete with heavy duty paper
5/32" (4.0MM) FLUID NOZZLE $10.00 and graduated plastic cups plus our exclusive cup
3/16" (4.8MM) FLUID NOZZLE $10.00 liner. (Sweetheart P4325 or Solo 320 fit our gun.)
7/32" (5.5MM) FLUID NOZZLE $10.00 Cast aluminum lid threaded to accept our precision
1/4" (6.3MM) FLUID NOZZLE $10.00 machined nozzles.
9/32" (7.1MM) FLUID NOZZLE $10.00
(25)
ACCESSORIES EQUIPMENT AND SUPPLIES
Air Powered Roving Chopper
Compact, hand held chopper is perfect for both
small and large jobs. Air powered, it has variable
speeds for controlling glass fiber output. It can chop
from 1/4" to 3" long strands, simply by adding or
subtracting blades. Safe and easy to operate, this
chopper is also an excellent tool for field repairs. All
models are now direct drive. Light weight unit for
easy glass fiber chopping, 3.5 lbs/min. output with
1" long strand. 3.5 CFM @ 80 psi. High-speed
blades for long life. Standard size anvil roller sleeve.
Our most popular chopper gun.
AIR POWERED HAND HELD CHOPPER
Complete with 12 extra blades and one extra
anvil roller sleeve.
$ 282.97
Our on site Cool Room is kept
at a constant 65° F, to ensure
DESCRIPTION the freshness of our heat
sensitive products and to
Air Motor guarantee our customers get
Anvil roller assy. the most shelf life from all our
Anvil Roller (tire) products.
Aluminum Cover
Cutter roller assy. (air)
Blade retaining ring
Cutter blades - Pack of 12
Cutter blades - Pack of 100
Feed roller assy.
Feed roller
Replacement parts available call for prices.
(26)
ACCESSORY SUPPLIES
Disposable Chip Brushes Roller covers
BRUSH SIZE PRICE/EACH PRICE/BOX ROLLER PRICE PRICE
COVERS EACH CASE
1” .60 $15.60/36CT
4” RESIN $ 2.30 $ 52.50/24CT
2” 1.00 $15.80/24CT
4” GELCOAT $ 2.30 $ 52.00/24CT
3” 1.50 $12.50/12CT
7” RESIN $ 3.20 $ 72.90/24CT
4” 3.00 $22.30/12CT
7” GELCOAT $ 3.40 $ 77.50/24CT
CAULKING PRODUCTS: 3M 5200
7” FOAM $ 1.80 $ 41.00/24CT
9” RESIN $ 3.40 $ 77.50/24CT
PERMANENTLY BONDING AND SEALING
WOOD AND FIBREGLASS 9” GELCOAT $ 4.20 $ 95.70/24CT
Bonding and sealing wood to fiberglass,
portholes, deck fittings or moldings requires a ROLLER FRAMES (case prices avail.)
product having structural strength. High 4”-$ 2.30 ea. 7”- $ 2.80 ea. 9”- $ 2.90 ea.
performance and durability are important
considerations in these types of applications; BUFFING PADS
the bond or seal must be extremely strong and
7 1/2” Diameter with 1 1/2” pile.
capable of retaining its strength above or below
single sided $ 9.20
the waterline. Flexibility is also important to
double sided $17.42
allow for dissipation of stress caused by shock,
final finish $ 9.20
vibration, swelling or shrinking. For best results
use 3M Marine Adhesive Sealant 5200 FC, 3” Diameter Roloc 3M. $ 6.50
a one-part moisture-curing polyurethane used Use with Finesse-It velcro back up pad.
for structural integrity.
CAULKING GUNS $ 5.50
CAULKING TUBES $ 2.20
Empty tubes, fit into caulk gun.
CAULKING REMOVER ANTI-BOND
The only product available to dissolve and
remove 5200. 10 oz. Tube $ 12.30
4 oz. $ 14.63 DECK PLATES
11.5 oz. $ 22.33 Pop out Style
4” - $ 7.70
CONTAINERS
6” - $ 10.00
Available in a variety of sizes and styles, metal
8” - $ 19.15
or plastic-sold with or without lids.
10”- $ 29.04
(27)
ACCESSORY SUPPLIES
GLOVES MIXER
Latex rubber gloves 5” Fan Blade $ 14.90
S-M-L-XL-White/100 box…….…$ 11.20 5” Speed Mixer $ 9.90
Green heavy duty latex gloves
L-XL/50 box………………………...$ 15.50 LINOLEUM KNIFE $ 4.10
HOLE SAW KIT - 5 piece $ 8.90 MASKING TAPE
A wide range of sizes and types.
TAN, GREEN, BLUE.
MIXING BOARDS Available individually or by the sleeve.
clean sheets CALL FOR PRICES.
#100……...$ 14.95 #200……...$ 21.95
M.E.K.-P DISPENSER
Graduations from 2.5 to 35 cc.
Instantly repeatable Tapered cup MASKING PAPER
for greater accuracy. 12” - $ 9.19
Covered cup. 16 oz bottle. 18” - $ 12.55
36” - $ 24.65
$ 5.28
MILL GUAGE
M.E.K.-P (CC) MEASURING CUPS Measure the thickness of wet gelcoat.
.10 each $ 3.40/sleeve 100 $ 1.11
PAPER BUCKETS
PAPER DISPOSABLE COVERALLS
Protective covering when grinding fiberglass. Half-gallon size 1.06 ea.
Gallon-size 1.26ea.
L-XL $ 5.10
25/Case $ 121.10
PAPER CUPS
XXL $ 5.40
XXL/25 Case $ 128.30 8 oz. ea. $ .32
XXXL $ 5.70 Sleeve (25 ct.) $ 5.06
XXXL/25 Case $ 135.40 16 oz. ea. $ .42
Sleeve (25 ct.) $ 5.89
COMPLETE WITH HOOD AND BOOT 32 oz. ea. $ .53
L $ 5.80 Sleeve (25 ct.) $ 8.40
L/25 Case $ 137.79
XL $ 6.30
XL/25 Case $ 149.60 PAINT CAN RIM-IT
XXL $ 6.60 Quart $ 1.70
XXL/25 Case $ 156.80 Gallon $ 2.00
(28)
ACCESSORY SUPPLIES
PAINT TRAY PAINT STRAINER
High grade polypropylene $ 3.60 each .11 $ 11.80/sleeve (250 ct.)
PLASTIC PAILS
Graduated cups with measurements on outside. SAFETY GLASSES
Available in Sleek $ 6.70
16 oz./ 1 Quart/ 2.5 Quart/ 5 Quart Large wrap-around $ 5.60
With or without lids.
Price varies depending on size and quantity.
SAFETY GOGGLES $ 1.80
PLASTIC SHEETING
Polypropylene sheet SPIGOT
10’ X 10” $ 3.50 Heavy duty plastic for drums.
10’ X 100’ $ 19.90 3/4” - $ 2.00 2” - $ 17.70
RAGS SPRAY SOCKS
Packaged in bags. Protect your head while sanding and grinding.
1 lb./ 5 lb./ 10 lb./ 25 lb. $ 1.80 ea $ 19.20/12 box
Prices vary depending on size.
SPREADERS
RAZOR BLADE SCRAPER
Polypropylene
Single edge razor blade holder
2” - .40 each $ 18.00/box
with 5 pack of blades. $ 1.80
4” - .60 each $ 21.60/box
Replacement 5 pack of blades 1.00
6” -.70 each $ 41.40/box
Set of 4 metal spreaders
RAZOR BLADE KNIFE $ 5.85 set
Snap-off blades
large $ 2.10
replacement blades $ 1.70 SQUEEGEE
Thalco rubber squeegee
small $ 1.20 6”- $ 5.60
replacement blades $ 1.00 12”- $9.50
18”- $14.50
24”- $16.70
TACK CLOTHS
36”- $22.40
$ 1.00 each
$ 9.60/12 per box
UTILITY KNIFE
SYRINGES each $ 3.20
Small 1.70 each 5 pack replacement blades $ 1.06
Medium (35 cc) $ 2.15 each 100 replacement blades $ 12.00
Large (60 cc ) $ 2.90 each
12 pack small $ 15.00 TAPE MEASURES
Wide variety of sizes, competitively priced.
WIRE BRUSH each $ 1.80
(29)
ORDER FORM
TO ORDER BY FAX: Copy this form, fill out the billing, shipping and item information below and fax this page to (941) 923-2133.
TO ORDER BY PHONE: Call (941) 923-8112 and talk to our sales department. Monday through Friday 8:30 am - 5:30 pm.
TO ORDER BY MAIL: Fill out this form and mail to : FIBERGLASS SERVICES, INC.
5612 LAWTON DRIVE
SARASOTA, FL 34233
CHECK US OUT ON THE WEB AT: www.fiberglassservices.com
Billing Address DATE:__________________ S h ip To A dd r es s ATTENTION:__________________
PO#_______________________________________________ PO#_______________________________________________
Company Name______________________________________ Company Name______________________________________
Address____________________________________________ Address____________________________________________
City______________________ State______ Zip____________ City______________________ State______ Zip____________
Phone# (___)_______________ Fax# (___)________________ Phone# (___)_______________ Fax# (___)________________
Your name__________________________________________ Your name__________________________________________
Out of state shipping is exempt from Florida Sales Tax. If we are shipping in Florida and you hold a current year Resale Tax
Exempt Certificate, please provide a photo copy with your order. All others must pay Florida State Sales Tax @ 7%
QTY PAGE # DESCRIPTION EACH AMOUNT
CALL FOR SHIPPING COSTS SHIPPING &
HANDLING
CALL FOR HAZARD CHARGES HAZARD CHARGES
TAX EXEMPT MUST SUPPLY RESALE CERTIFICATE FL State sales tax 7%
TOTAL
PAYMENT METHOD Shipping & Handling Charges: Call for cost of shipping.
Shipping is via best way, and is based on weight and destination.
□ Master Card □ Visa Expiration____/____/____ Hazard Charges: Call for Hazard charges. Charges vary.
Actual Carrier Hazard charges pertain.
Card# _ _ _ _ - _ _ _ _ - _ _ _ _ - _ _ _ _ - _ _ _ _
Returns:
Card holder’s Signature___________________________ Call for authorization and instructions for ALL returns.
□ Net 30 - Prior Credit Approval Required Customer is responsible for all inbound and outbound shipping
charges resulting from items ordered in error. Items can be
□ Check enclosed # ____________ $ _____________ returned only in an unopened and re-saleable condition.
Driver’s License # & State of issue is required on ALL CHECKS
(30)
