Dell AXIM X30X50X50v wireless se

Document Sample
Dell AXIM X30X50X50v wireless se Powered By Docstoc
					Dell AXIM X30/X50/X50v wireless setup

   1. Turn on your PDA and start from the Today Screen.

   2. Go to SETTINGS to get to the DELL WLAN Utility under the CONNECTIONS
3. Enable the Odyssey Client in the CONNECTIONS tab.

4. Verify connection to “hostreg” via the Odyssey Client.
5. Register the device in Internet Explorer via the “hostreg” connection. Start from
   the Today Screen. Be sure to key in “” in the Internet Explorer
   address window to get access to the Host Registration website…
6. LOGON to “hostreg” with your distinguished network logon credentials.

7. Select the “Building” you will be using the wireless device in. Select
   “WIRELESS” as your Category. Leave “Tag #” blank (if you are Faculty/staff,
   you MUST populate this field with the 5-digit tag number attached to the device).
   “Hardware Address” should be populated by a 12-digit alpha-numeric MAC
   Address (Media Access Control address). “Operating System” should be selected
   as Windows CE.
8. “Agree and Submit” to the use of the CWU Wireless network. (It takes 5-minutes
   for the device to be registered in the Host Registration database.)

9. SOFTBOOT the device…

                                   Performing a Reset
                                        Soft Reset
         When you perform a soft reset, the device deletes any data that has not been
         saved but saves any data that has been stored in memory. Try performing a
          soft reset if the device does not respond when you tap the display or press
                                           a button.
            To perform a soft reset, use the reset stylus to press the reset button.
                                         reset stylus
                                         reset button

                                        Hard Reset
        NOTICE: When you perform a hard reset, you lose all the data stored in your
            device memory, and any programs that you installed on your device.
                                    Perform a hard reset if:
              • You want to delete all the data stored in your device memory.
                      • You forget your password and need to clear it.
          • Your device is experiencing severe operational problems and you have
                                already attempted a soft reset.
         NOTICE: It is strongly recommended that you back up your data before you
              perform a hard reset. See ActiveSync Help on your computer for
                                     more information.
                                   To perform a hard reset:
                             1 Press and hold the power button.
             2 Using the reset stylus, hold the reset button for about 2 seconds.
                          3 Follow the instructions on the screen.

10. Create wireless profile in the Odyssey Client to be able to get network connection
    to the “cwu” wireless network. Start from the Today Screen, go to SETTINGS,
    CONNECTIONS and click on Odyssey Client…
11. Go to SETTINGS and click on CONFIGURE…

12. Hit the ADD button…
13. Type in “cwu” all lowercase for the network name…hit NEXT.

14. Be sure these options are selected, then hit NEXT;
       A. Association Mode: OPEN
       B. Encryption Method: WEP
       C. “Check the box” to (Authenticate Using 802.1x)
       D. “Check the box” that (Keys Will be Generated Automatically)
15. EAP/TTLS should be selected… uncheck “Validate Server Certificate”…hit

16. Leave “anonymous” selected…hit NEXT.
17. Select PAP from the drop down box as your Inner Authentication Protocol…hit
18. Type in your “username” (NOT the whole Novell login context), select “Use
    Following Password” radio button, and type in your “password”…hit NEXT.

19. Hit “FINISH”…
20. You should see your newly created “cwu” profile in the list of networks. Hit the
    OK button in the upper-right corner…

21. Under the “Connect To:” check box is a drop-down dialogue box where you can
    select your newly created “cwu” network profile. When successful, you should
    see your status as “connected/authenticated” with a network SSID for “cwu”…hit
    OK in the upper-right corner.
22. When successful, your Today Screen should look something like this (notice the
    blue color of the Odyssey Client in the lower-right corner…if it is red, then there
    is an “authentication” problem…if it is black, then you have selected the wrong
    network to connect to).

23. From this point you are done with the setup and should be able to web browse.
    Problems or questions? x2001 or come down to Bouillon Hall room 128 in
    Computer Support Services for additional support.
(DISCLAIMER: ALL copyrights, trademarks and images are the sole ownership of their respective authors. No
guarantees or warranty, expressed or implied, including warranties of merchantability and fitness for a particular
purpose, are made as to the currency, accuracy, quality, completeness, availability or usefulness of data,
information, apparatus, product, or process disclosed, provided through this service, and no responsibility or legal
liability is assumed for any damages or inconvenience arising from its use.)