NOTICE TO PURCHASERS – Sanmina – by fjwuxn

VIEWS: 598 PAGES: 28

									                By order of Sanmina-SCI Inc.
             Due to the closure of their Grenoble
              Surface Mount Assembly Facility


                    Webcast Auction Sale



        Surface Mount and Through Hole PCB Assembly
                       and Test Facility


  At: SCI France, Zone Technisud, Rue H. Chardonnet – BP 171
                F38042 Grenoble cedex 9, France

          On: Thursday 12th June 2003 at 10.00am CET

 On View: Wednesday 11th June 2003 from 9.00am to 4.00pm CET


_______________________________________________________


               Vente aux enchères en webdiffusion

      Atelier d‟assemblage et de test de cartes èlectroniques
                      CMS et traditionnelles

  À: SCI France, Zone Technisud, Rue H. Chardonnet – BP 171
               F38042 Grenoble cedex 9, France


               Le: Jeudi 12 juin 2003 à 10h00 CET

        Inspection: Mercredi 11 juin de 9h00 à 16h00 CET
                         TERMS AND CONDITIONS OF SALE &
                             PRACTICAL INFORMATION


The sale will be held in the terms and conditions below. All purchasers must agree they
have full knowledge of these terms and conditions and agree to be bound thereby.

1. AUCTIONS

Purchasers must register to clerks during the exhibition period (11th June 9 am to 4 pm) or,
failing that, ½ hour before the sale on the considered sale site and provide guarantees of
payment.
Every bidder will be assigned a number that he will have to present immediately after the
auction hammer falls.

The auctioneers are authorised to impose the order of the lots to be sold and the progress of
the sale and bidders must comply with their choice.
In the event of a tied bid effectively acknowledged by the auctioneers, the call for bids is made
once again, and all bidders present at the sale will be able to place bids in this second auction
sale.

The auctioneers reserve the right to group or subdivide lots at their sole discretion.

2. No claim may be made by the successful bidder relating to the condition of items
   purchased.

3. No warranty is given in respect of any item. Besides, the description of the machinery in the
   catalogue is mentioned for information only and shall not give rise to any claim.

4. Responsibility for each article sold belongs to the buyer immediately after the hammer falls:
   the auctioneers assume no responsibility for items damaged once title passes.

5. PAYMENT

Bids are made in € with payments being made cash:

-   by cash until 3000 € for French purchasers and without limitation for purchasers who do not
    have tax residence in France
-   by bank cheque or cheque accompanied by bank letter of credit,
-   by credit transfer for French purchasers, or swift for foreign purchasers. In the latter case,
    bank costs implied are payable by the purchaser.

Purchasers will have to pay an additional 10% Buyers Premium (Plus VAT at 19.6%) on the
hammer price. Any purchasers using the GoIndustry Webcast facility will be subject to 13.5%
Buyers Premium (Plus VAT at 19.6%)

All bids are VAT exclusive, the latter being recoverable for bidders liable to it. In case of export,
VAT will be refunded by the clerks upon presentation of documentary evidence (EX1 customs
form) within 2 months after the sale.

In the event a bidder fails to pay cash, the auctioneer reserves the right to resell the machinery
immediately without notice.
In case of payment by cheque or credit transfer or in the event the purchaser‟s credit worthiness
is questioned, the ownership transfer and the removal may be withheld until payment has been
cleared.

6. REMOVAL

Merchandise purchased must be removed within the following time limits:

Beginning 13th June 2003 - 2pm / Clearing Limit 27th June 2003 - 5pm

Purchasers of small devices shall remove them within a week after the sale.
The removal of bulky equipment needing dismantling (injection molding and stamping presses,
ovens, welding and assembling lines…) shall be made by appointment with the auction clerks
and the factory managers !

Removal must be made in accordance with safety regulations in force. For bulky devices, the
process will take place and studuying the exact way through wich they will be displaced inside
of the factory.

All lots ar removed at the expense and risk of the purchaser, who is personnaly and financially
responsible for any damage or accident caused by himself or any member of his staff.

Copies of the carrier‟s identity card shall be made prior to any removal.

The equipment will only be issued upon presentation of the purchase note.

Any merchandise not removed within the time limits shall be deemed to have been abandoned
and will be destroyed at the expense of the purchaser.

7. COMMISSION BID

Absentee bidders will be able to communicate their commission bids in writing to the
auctioneers with their bank references at the latest 48 hours before the auction SVV ARTUS
ENCHERES DTO TEL : 00 33 (1) 47 70 87 29 – FAX 00 33 (1) 42 46 71 44 – E-mail :
artus@easynet.fr

8. INFORMATION

-   for any practical information (catalogue, auctions…) concerning the sale purchasers can
    contact the offices mentioned above.
-   For any technical information, concerning the machinery, purchasers can contact :

    Duncan Ainscough
    Tel : +44 (0)7785 221919
    Email : duncan.ainscough@henrybutcher.com


N.B. Most of the devices respond to French current standards. For those which do not, it will be
French purchaser‟s responsability to bring them up to standards. Foreign purchasers will have
to comply with their own national standards.
In the event of impossible exports, no refunding or returns will be permitted.
Besides, most of the device‟s handling logs are available and will be provided on request after
the sale.
9. HAULAGE & HANDLING COMPANIES (non restrictive list)

  Import Export Services

  Tel: +44 (0) 1275 373 809
  Fax: +44 (0) 1275 375 550
  Email : simonb@ies.co.uk

  Cotte Industrie

  Tel: +33 (0) 4 76 64 93 40
  Fax: +33 (0) 4 76 64 93 39
  Email: cotte.industrie@wanadoo.fr

  E.I.E.R 2000

  Tel: +33 (0) 4 76 53 20 07
  Fax: +33 (0) 4 76 27 57 76

  Sofembal

  Tel: +33 (0) 4 76 58 21 21
  Fax: +33 (0) 4 76 58 00 00
                               CONDITIONS DE VENTE
                            & INFORMATIONS PRATIQUES


La vente aura lieu aux charges et conditions ci-après auxquelles les acquéreurs devront
obligatoirement se soumettre.

1. ENCHERES

Les acquéreurs devront lors de l’exposition du 11 juin, ou à défaut ½ heure avant la vente
aux enchères impérativement s’enregistrer auprès des organisateurs sur chacun des sites
de vente et fournir des garanties de paiement.
Il sera attribué à chaque acquéreur un numéro qu’il devra présenter dès l’adjudication.

Les commissaires priseurs sont libres de fixer l’ordre et la progression des enchères et les
acquéreurs sont tenus de s’y conformer. Le plus offrant et le dernier enchérisseur sera
l’adjudicataire.
En cas de double enchère effectivement reconnue par les commissaires priseurs, le
matériel sera remis en vente, tous les amateurs présents pouvant concourir à cette
deuxième mise en adjudication.

Certains lots pourront faire l’objet de divisions ou de faculté de réunion laissées à la seule
appréciation des commissaires priseurs.

2. LES ACQUEREURS récupéreront le matériel adjugé dans l’état où il se trouve au moment
   du prononcé de l’adjudication et sans aucune réclamation.

3. L‟ENSEMBLE DU MATERIEL EST VENDU SANS GARANTIE. D’autre part, les dimentions
   des matériels portées au catalogue sont mentionnées à titre indicatif et ne pourront faire
   l’objet d’aucune contestation.

4. LES ADJUDICATAIRES SERONT PROPRIETAIRES ET RESPONSABLES DE LEUR
   MATERIEL DES LE PRONONCE DE L‟ADJUDICATION. et se chargeront eux-mêmes de
   faire assurer leurs acquisitions : les commissaires priseurs déclinant toute
   responsabilité quant au dommage que le matériel pourrait encourir dès le prononcé de
   l’adjudication.

5. PAIEMENT

La vente aux enchères se fait en € par paiement au comptant :

-   en espèces jusqu’à 3000 € pour les acquéreurs français commerçants et sans limitation
    pour ceux n’ayant pas de résidence fiscale en France,
-   chèque de banque ou chèque avec lettre accréditive de banque
-   virement bancaire pour les acquéreurs français ou swift pour les acquéreurs étrangers.
    Dans ce dernier cas, les frais bancaires seront à la charge de l’acquéreur.

Un supplément correspondant à 10 % du prix final (plus la TVA à 19,6 %)
sera facturé aux Acheteurs. Tout les Acheteurs qui utilisent la fonctionnalité Webcast
de GoIndustry devront régler un supplément de 13,5 % (plus la TVA à 19,6 %)

Le montant des offres indiqué est hors taxe ; la TVA pouvant toutefois être récupérée, le cas
échéant. En cas d'exportation des marchandises, la TVA pourra être remboursée sur
présentation de documents justificatifs (formulaire de douane EX1) dans un délai de 2 mois
à compter de la date de la vente.

les acquéreurs devront payer en sus des enchères des frais de 11,96 % TTC.
A défaut de paiement comptant, le matériel pourra être remis aussitôt en vente sur folle enchères
ou à la première opportunité.

En cas de paiement par chèque ou par virement ou de doute sur la solvabilité de l‟acquéreur, le
transfert de propriété et l‟enlèvement pourront être différés jusqu‟à l‟encaissement du moyen du
paiement.

6. ENLEVEMENTS

Les adjudicataires seront tenus de prendre livraison des matériels qui leur auront été
adjugés aux dates qui suivent :

           Le 13.06 à partir de 14 heures / enlèvements terminés le 27.06 à 17 heures

Les adjudicataires des petits matériels seront tenus de les enlever dans la semaine de la
vente. Les enlèvements des gros matériels nécessitant un démontage devront être faits sur
rendez-vous auprès des Commissaires Priseurs organisateurs et des responsables.

Les enlèvements devront être réalisés en conformité avec les règlements de sécurité en
vigueur et avec établissement d’un plan de circulation pour les grosses machines. Ces
enlèvements seront effectués aux frais et risques des adjudicataires qui seront
personnellement et financièrement responsables des dégâts et accidents causés soit par
eux-mêmes, leurs employés ou préposés.

Il sera fait des photocopies des cartes d’identité de chaque transporteur au préalable à tout
enlèvement.
Le matériel ne sera délivré uniquement qu’après présentation du bordereau d’acquisition.

Tout matériel acquis pendant la vente et non enlevé dans les délais impartis sera considéré
comme abandonné et sera détruit aux frais de l’acquéreur.

7. ORDRE D‟ACHAT

En cas d’impossibilité d’assister aux ventes, il est loisible aux acquéreurs de confier
gracieusement leurs ordres d’achat par écrit aux commissaires priseurs accompagnés de
leurs références bancaires au plus tard 48 heures avant la vente :


SVV ARTUS ENCHERES DTO – TEL : 00 33 (1) 47 70 87 29 – FAX : 00 33 (1) 42 46 71 44 –
E-mail : artus@easynet.fr

8. RENSEIGNEMENTS

Pour tout renseignement d‟ordre pratique (catalogue, enchères,) concernant la vente les
acquéreurs sont invités à s’adresser aux études ci-dessus mentionnées

Pour tout renseignement d‟ordre techniques concernant les machines, les acquéreurs sont
invités à s’adresser :

Duncan Ainscough
Tel : +44 (0)7785 221919
Email : duncan.ainscough@henrybutcher.com

N.B. Nous indiquons aux acquéreurs que la grande majorité des machines a été remise aux
normes actuelles françaises, à charge, dans le cas contraire, pour les acquéreurs français
de les mettre en conformité. Les acquéreurs étrangers devront se conformer à leurs
normes nationales.
Aucun remboursement ou annulation de vente ne sera admis en cas d’impossibilité
d‘exportation.
9. TRANSPORTS & MANUTENTION (liste non limitative)


   Services d‟Importation et Exportation

   Tel: +44 (0) 1275 373 809
   Fax: +44 (0) 1275 375 550
   Email : simonb@ies.co.uk

   Cotte Industrie

   Tel: +33 (0) 4 76 64 93 40
   Fax: +33 (0) 4 76 64 93 39
   Email: cotte.industrie@wanadoo.fr

   E.I.E.R 2000

   Tel: +33 (0) 4 76 53 20 07
   Fax: +33 (0) 4 76 27 57 76

   Sofembal

   Tel: +33 (0) 4 76 58 21 21
   Fax: +33 (0) 4 76 58 00 00
                  NOTICE TO PURCHASERS – Sanmina–SCI, Grenoble, France
                                Thursday 12th June 2003

1. Useful Tel. No’s   Site Manager: Mr Jonathan Saville Tel. +44 (0) 7774 652404
                      Webcast Information
                      Darragh McAvinney (Auction Accounts): Tel. +49 891 255 5834
                      Payment Enquiries: Artus encheres D.T.O Tel. +33 (0)1.47.70.87.29
 2. Directions:       From Lyon (St Expury) Airport Head South on the A43 and the A48
                      towards Grenoble. Continue along the A48 to the Grenoble tollgate. After
                      the tollgate follow „TOUTES DIRECTIONS‟ take the Exit, Direction
                      „CHAMBERY‟ stay in the right hand lane and follow EXIT No 8 ZONE
                      „TECHNISUD‟, at traffic lights turn left. At next set of lights turn left again, as if
                      you are going back on to the motorway Direction „LYON‟. On the right hand side
                      take the side road with Red Tarmac into the Technisud area then follow the
                      Henry Butcher Signs to the Auction Car Park

3. Viewing:           The Lots may be viewed Wednesday 11th June between the hours of 9.00a.m.
                      to 4.00p.m CET and from 9.00am on the morning of sale.
4. Refreshments       Light refreshments will be available at the sale.
5. Terms:             ALL MONIES DUE MUST BE PAID ON OR BEFORE MONDAY 16TH JUNE
                      2003 ON SITE OR BY TELEGRAPHIC TRANSFER. LOTS MAY ONLY BE
                      COLLECTED UPON RECEIPT OF FUNDS:
                      Cash, Telegraphic Transfer - lots may only be collected upon receipt of funds:
                      Bank details for telegraphic transfer:
                      Bank: CREDIT DU NORD, PARIS BLD ITALIENS
                      Banque: 30076
                      Agence: 02021
                      No de Compte: 12565106000
                      Cle RIB: 19
                      IBAN Code: (For Foreign Payment): IBAN FR76 3007 6020 2112 5651 0600 019
                      All queries in relation to payment to Artus encheres D.T.O
                      +33 (0)1.47.70.87.29
6. Risk:              The Bidder is on risk once the hammer falls and is strongly advised to effect
                      insurance at once.
7. Buyers Choice      Where similar lots are indicated in the catalogue the Auctioneer may offer Buyers
                      Choice. This allows the successful bidder to choose which (or all) lots in a given
                      run they would like on a per lot basis taken either in or out of sequence.
8. Transfer of Lots   The Auctioneer will only accept payment from and permit removal of lots
                      purchased by the Purchaser successfully bidding at the sale or its agent acting
                      for the purchaser.
9. Recording          Please note this sale is recorded and we reserve the right to use the recordings
                      to assist with resolving disputes or legal issues as appropriate.
10. Conditions of sale The attention of Purchasers is drawn to the Conditions of Sale included in this
                       Catalogue
11. Purchase of       The Auctioneers draw to the attention of buyers contemplating purchasing goods
goods through a       through a finance company that arrangements should be made well in advance
Finance Company       of the Sale so they may make payment in accordance with the Conditions of Sale.
12. Overseas Purchasers
                     Overseas Purchasers must register showing or providing details of:
                     1) Their passport(s).
                     2) One other method confirming their identity, i.e. drivers licence, name, address,
                     Agent (if any), telephone and fax numbers.
                     3) Full details of their National Bank and their corresponding bank.
                     4) Details from their bank confirming method of payment etc.
                     Please also ensure that:
                     5) Your country, or the country to which the items are destined, holds no import
                     restrictions on the goods that you wish to purchase.
                     6) The country has no import licence restrictions or a restriction on currency
                     allocation.
                     7) The country has no prolonged inspection procedure which might cause
                     excessive delay in allowing your goods to be imported.
                     8) You receive a fully-descriptive invoice in order that you may arrange payment
                     as soon as possible.
                     9) You employ a reputable freight forwarding organisation. Please note that
                     many of the machinery removal companies in this country are not necessarily
                     freight forwarders. We will be pleased to advise accordingly.
                     10) You have read the Conditions of Sale
13. Please Note:     Henry Butcher and Artus encheres D.T.O reserve the right to refuse to
                     accept the bid of any attendee should they be unable to satisfy Henry
                     Butcher and Artus encheres D.T.O on any of the above.
                      AVIS AUX ACHETEURS – Sanmina – SCI Grenoble, France
                                    Jeudi 12 juin 2003

1. Numéros de téléphone utiles :
                   Directeur de projet : Mr Jonathan Saville - Tel. : +44 (0) 7774 652404
                   Informations relatives à Webcast : Darragh McAvinney
                      (Comptes ventes aux enchères) : Tél. : +49 891 255 5834
                      Demandes relatives au paiement : Artus encheres D.T.O –
                      Tél. : +33 (0)1.47.70.87.29

2. Comment s'y rendre :
                   Depuis l'aéroport de Lyon (St-Expury), prenez l'autoroute A43 en direction du Sud,
                   puis l'autoroute A48 en direction de Grenoble.
                   Continuez sur l'autoroute A48 jusqu'à la barrière de péage de Grenoble.
                   Après avoir passé la barrière de péage, suivez les panneaux "TOUTES
                   DIRECTIONS", prenez la sortie en direction de "CHAMBERY", restez sur la file de
                   droite et prenez la SORTIE N° 8 ZONE "TECHNISUD"
                   Au feu tricolore, prenez à gauche.
                   Allez jusqu'au feu tricolore suivant. Là, tournez à gauche à nouveau, comme si
                   vous alliez reprendre l'autoroute en direction de "LYON"
                   Sur la droite, prenez la route secondaire recouverte de bitume rouge qui s'engage
                   dans la zone Technisud, puis suivez les panneaux indiquant la direction "Henry
                   Butcher" (aire de stationnement de la maison de vente aux enchères)

3. Visite :            Les lots seront visibles au public le mercredi 11 juin entre 9h00 et 16h00 CET
                       (heure de l'Europe Centrale), et à partir de 9h00 le jour de la vente.

4. Rafraîchissements: Des boissons rafraîchissantes seront offertes sur le lieu de la vente.

5. Conditions :        TOUTES LES SOMMES DUES DEVRONT ÊTRE RÉGLÉES AU PLUS TARD
                       LE LUNDI 16 JUIN 2003, SUR PLACE OU PAR VIREMENT TÉLÉGRAPHIQUE.
                       LES LOTS NE SERONT REMIS QU'APRÈS PAIEMENT DES SOMMES DUES :
                       En cas de paiement en liquide et par virement télégraphique : les lots ne seront
                       remis qu'après paiement des sommes dues :
                       Coordonnées bancaires pour virement télégraphique :
                       Adresse de la banque : CREDIT DU NORD, PARIS BLD ITALIENS
                       Banque : 30076
                       Agence : 02021
                       Numéro de compte : 12565106000
                       Clé RIB : 19

                       IBAN Code: (pour des paiements étrangers): IBAN FR76 3007 6020 2112 5651
                       0600 019

                       Pour toute question relative au paiement, contactez Artus encheres D.T.O
                       au +33 (0)1.47.70.87.29

9. Responsabilité du Participant :
                      La responsabilité du Participant est engagée dès lors que le marteau du
                      commissaire-priseur s'est abattu. En conséquence, il est vivement conseillé au
                      Participant de contracter immédiatement une assurance.

12. Choix de l'Acheteur :
                       Lorsque des lots similaires sont présentés dans le catalogue, le commissaire-
                       priseur peut décider de laisser le choix à l'Acheteur. Le Participant ayant
                       remporté l'enchère peut alors choisir parmi les lots sélectionnés celui ou ceux
                       qu'il souhaite, et ce, dans l'ordre de son choix.

13. Transfert de lots : Le Commissaire-priseur ne saurait accepter un autre paiement des lots achetés
                        ni autoriser l'enlèvement de ceux-ci par quelqu'un d'autre que l'Acheteur ayant
                        remporté l'enchère ou par un agent agissant au nom de celui-ci.

15. Enregistrement :   Veuillez noter que cette vente a fait l'objet d'un enregistrement et que nous nous
                       réservons le droit d'utiliser les-dits enregistrements aux fins de résoudre le cas
                       échéant tout litige ou question d'ordre juridique susceptible de survenir.

16. Conditions de vente :
                       Nous attirons l'attention des Acheteurs sur le fait que les Conditions de vente
                       sont incluses au présent Catalogue

17. Achat de marchandises par le biais d'une société de financement :
                     Les Commissaires-priseurs attirent l'attention des Acheteurs souhaitant acheter
                     des marchandises par le biais d'une société de financement, sur le fait qu'un
                     accord devra avoir été conclu bien avant la survenue de la Vente afin que les
                     Acheteurs concernés puissent procéder au paiement des lots conformément aux
                     dispositions figurant dans les Conditions de vente.

19. Acheteurs étrangers :
                      Les Acheteurs étrangers doivent fournir les informations suivantes pour pouvoir
                      s'enregistrer :
                      1) Passeports respectifs.
                      2) Tout autre document confirmant leur identité : permis de conduire, noms et
                      adresse, Agent (le cas échéant), numéros de téléphone et de fax.
                      3) Coordonnées complètes de leur banque nationale et de leur correspondant
                      agence, le cas échéant.
                      4) Coordonnées bancaires confirmant le mode de paiement utilisé, etc.
                      Vérifiez également que :
                      5) Votre pays, ou celui vers lequel les biens seront acheminés, n'est soumis à
                      aucune restriction à l'importation sur les marchandises que vous souhaitez
                      acheter.
                      6) Le pays n'est soumis à aucune restriction sur les licences d'importation ou sur
                      l'octroi des devises.
                      7) Le pays ne fait l'objet d'aucune procédure d'inspection prolongée susceptible
                      d'entraîner des délais excessifs lors de l'obtention des autorisations nécessaires
                      à l'importation de vos marchandises.
                      8) Vous avez reçu une facture détaillant l'ensemble des biens achetés afin que
                      vous puissiez procéder au paiement de ceux-ci dans les meilleurs délais.
                      9) L'organisme d'expédition auquel vous faites appel est digne de confiance.
                      Notez que la plupart des sociétés spécialisées dans l'enlèvement des
                      équipements de ce pays ne sont pas des transitaires. Nous nous ferons un plaisir
                      de vous fournir des informations complémentaires, le cas échéant.
                      10) Vous avez pris connaissance des Conditions de vente

20. Remarque :         Henry Butcher et Artus encheres D.T.O se réservent le droit de refuser
                       toute offre provenant d'un Participant qui n'aurait pas satisfait à l'ensemble
                       des dispositions énoncées ci-avant par Henry Butcher et Artus encheres
                       D.T.O.
                                           WEBCAST BIDDING
REGISTRATION
1.  Go to www.goindustry.com. You will see the “Sanmina SCI, Grenoble” sale listed on the home page.
2.  Click the link for “Sanmina SCI, Grenoble” sale and you will be transferred to the auction list.
3.  Select the „„register here‟‟ option and then complete the registration form. Please ensure that you read
    and accept the Terms and Conditions of sale.
4.  As part of the approval process you are requested to fax the fully completed „‟Payment Details‟‟ form to
    Henry Butcher at the following no: +44 (0) 207 916 5442
5.  Upon approval you will receive an email confirming your participation and containing instructions for the
    bidding via the GoIndustry Webcast

PROXY BIDS/ABSENTEE BIDS
Once you have been approved you will have the opportunity to place proxy bids. To do this, please follow these
instructions:
1.     Click on the link for proxy bidding that is contained in your approval e-mail.
2.     Login using your username and password.
3.     Go through the list of lots and enter your bid in the field to the right of the lot description.
4.     Activate the „‟Save‟‟ button to save your entries before moving on to the next page of lots.
5.     When you are finished entering your proxy bids activate the „‟Submit Proxy Bids‟‟. This information will
       then be sent to GoIndustry.
6.     Please note proxy bidding will be available until 18.00pm BST on the day prior to the start of auction.

 ON THE DAY OF SALE
1.   Go to www.goindustry.com. You will see the “Sanmina SCI, Grenoble” listed on the home page.
2.   Click on the link for the “Sanmina SCI, Grenoble” sale and you will be transferred to the auction list.
3.   Select the „‟Login‟‟ option. This will take you to the login page where you should enter your username and
     password.
4.   Following from this, a small Java applet (a computer application needed to run WebCast) will be
     downloaded onto your computer.
5.   Before the Java applet begins to download, you will be asked to accept a certificate of authenticity from
     GoIndustry. This assures you that the applet has been sent directly from GoIndustry and is safe to run on
     your computer. After clicking on „‟accept”, the applet will be downloaded and started.
6.   You will now see the bidding applet on your screen.
7.   There are 2 ways to place a bid:
a.   Activate the „‟Place Bid‟‟, to place a bid in relation to the auctioneer‟s increment.
b.   Enter your bid amount in the field and then activate the „‟Place Bid‟‟ button.
8.   For more detailed bidding instructions we recommend you read the Webcast instructions that you will find
     on www.goindustry.com on the auction-listing page in the section „‟WebCast Instructions‟‟.

AFTER THE SALE
You will receive your invoice confirming your purchases by fax on the day after the sale. All items purchased
through the Webcast Facility are subject to a Buyers Premium of 13.5%. VAT will be charged at 19.6% on the
sum of Hammer Price plus Buyers Premium (excepting VAT exemptions).
For export rules please read the Notice to Webcast Purchasers found at www.goindustry.com once you enter
the related sale page.

IMPORTANT NOTE:-
The Internet is not foolproof and a number of factors such as the speed of your modem, the amount of
traffic being carried by your service provider and even the integrity of the telephone connection can
affect how you are able to view the sale.

Whilst all efforts have been made to ensure fast data transfer from the site neither Henry Butcher or
GoIndustry can accept responsibility for equipment failure or loss of connection from the site which is
beyond our control.

For all other technical enquiries relating to Internet bidding contact:
Henry Butcher IT Support:             +44 (0) 20 7692 8293
Payment Enquiries:                   +49 (0) 174 321 0103
                               SOUMISSION D'OFFRES AVEC WEBCAST
INSCRIPTION
1. Allez à l'adresse www.goindustry.com. Une vente Sanmina SCI, Grenoble est visible sur la page d'accueil.
2. Cliquez sur le lien relatif à la vente Sanmina SCI, Grenoble pour accéder aux informations sur l'enchère.
3. Sélectionnez l'option Inscription et remplissez le formulaire d'inscription. Assurez-vous d'avoir lu et accepté les
Conditions générales de vente.
4. Le processus d'acceptation implique que vous faxiez le formulaire d'informations détaillées sur le paiement dûment
complété à la société Henry Butcher au numéro suivant : +44 (0) 207 916 5442
5. Sous réserve d'acceptation, vous recevrez un e-mail confirmant votre participation et contenant des instructions
relatives à la soumission d'offres via la vente aux enchères Webcast

SURENCHÈRES AUTOMATIQUES / ENCHERES PAR CORRESPONDANCE
Une fois votre demande de participation acceptée, vous pourrez soumettre des offres par surenchère automatique.
Pour cela, procédez comme suit :
1. Cliquez sur le lien approprié accessible dans l'e-mail de notification d'acceptation pour accéder aux surenchères
automatiques.
2. Connectez-vous à l'aide de votre nom d'utilisateur et de votre mot de passe.
3. Parcourez la liste des lots et entrez le montant de votre choix dans le champ situé à droite de la description du lot
qui vous intéresse.
4. Cliquez sur le bouton Enregistrer pour enregistrer les données saisies avant de passer à la page suivante.
5. Lorsque vous avez fini d'entrer des surenchères automatiques, cliquez sur Soumettre les surenchères
automatiques (Submit Proxy Bids). Ces informations sont alors envoyées à GoIndustry.
6. Notez que la fonction de surenchère automatique est accessible jusqu'à 18h00 (heure d'été anglaise) le jour
précédent le début de la vente aux enchères.

 LE JOUR DE LA VENTE
1. Allez à l'adresse www.goindustry.com. Une vente "Sanmina SCI, Grenoble" sera visible sur la page d'accueil.
2. Cliquez sur le lien correspondant pour accéder à la liste des enchères.
3. Sélectionnez l'option Connexion (Login) pour accéder à la page de connexion et entrez votre nom d'utilisateur et
votre mot de passe.
4. Une petite applet Java (application nécessaire à l'exécution de WebCast) est alors téléchargée sur votre
ordinateur.
5. Avant le téléchargement de l'applet Java, vous devez accepter un certificat d'authenticité de GoIndustry. Ceci vous
permet d'être certain que l'applet provient directement de GoIndustry et que vous pouvez l'exécuter sur votre
ordinateur en toute sécurité. Lorsque vous cliquez sur Accepter, l'applet est téléchargée et se lance.
6. L'applet de soumission d'offres apparaît alors sur votre écran.
7. Vous pouvez soumettre des offres de deux manières différentes :
a. uez sur le bouton Placer une enchère pour soumettre une offre conforme à l'incrément d'offre fixé par le
commissaire-priseur.
b. Entrez le montant de votre offre dans le champ prévu à cet effet, puis cliquez sur le bouton Placer une enchère.
8. Pour obtenir des instructions complémentaires sur la soumission d'offres, nous vous recommandons de lire les
instructions Webcast accessibles sur le site www.goindustry.com, à la page relative aux informations sur l'enchère,
section Instructions WebCast.

A L'ISSUE DE LA VENTE
Le jour suivant la vente, vous recevrez par fax une facture de confirmation de vos achats. Un supplément acheteur
de 13,5 % est appliqué à tous les articles vendus via Webcast Facility. La TVA appliquée représente 19,6 % du
montant de la somme Prix final + Supplément acheteur (excepté pour les participants bénéficiant d'une exemption de
TVA).
Les conditions relatives à l'exportation sont définies dans l'avis aux utilisateurs de Webcast (Notice to Webcast
Purchasers) accessible à l'adresse www.goindustry.com (sélectionnez la page relative à la vente).

REMARQUE IMPORTANTE :
Internet n'étant pas un outil absolument sûr, un certain nombre de facteurs (comme le débit de votre modem,
le trafic géré par votre fournisseur de services, ainsi que l'intégrité de votre connexion téléphonique) peuvent
avoir une incidence sur la qualité de votre accès à la vente.
Bien que toutes les dispositions requises aient été prises afin d'assurer des transferts de données rapides
depuis le site, ni Henry Butcher ni GoIndustry ne sauraient être tenus pour responsables d'une éventuelle
défaillance matérielle ou perte de la connexion avec le site pour une raison indépendante de leur volonté.

Pour toute information technique relative à la soumission d'offres par Internet, contactez :
Service informatique Henry Butcher:             +44 (0) 20 7692 8293
Demandes relatives au paiement :               +49 (0) 174 321 0103
               OFFICE / WORKS               67 - 82   A Similar Lot
                 FURNITURE
                                              83      Blank Lot
  1       A Trau 1500mm x 450mm x
                                              84      A Quantity of Computer
          950mm High 2 Door
                                                      Accessories
          Stationery Cupboard
                                              85      A Similar Lot
2 - 12    A Similar Lot
                                            86 - 87   Blank Lot
  13      A Trau 1500mm Workstation
          and Mobile Pedestal                 88      A Hewlett Packard 'LaserJet
                                                      4M' Laser Printer
  14      A Trau 1400mm Workstation
          and Mobile Pedestal               89 - 90   A Similar Lot
  15      A 1200mm Dia. Meeting                         BUSINESS EQUIPMENT
          Table
                                              91      A Hewlett Packard 'LaserJet
  16      A Trau 1500mm Workstation                   2100' Laser Printer
          and Mobile Pedestal
                                            92 - 93   A Similar Lot
  17      A Similar Lot
                                              94      A Hewlett Packard 'LaserJet 4
  18      Two Multi Compartment                       Plus' Laser Printer
          Personnel Lockers
                                              95      A Similar Lot
  19      A JEC Steel Tambour Front
                                              96      A Hewlett Packard 'DesignJet
          Cabinet
                                                      650C' Printer
  20      A Trau 1500mm x 450mm x
          950mm High 2 Door                   97      A Printer 'Formspro 4503'
                                                      Printer
          Stationery Cupboard
                                              98      An Epson 'FX2180' Printer
  21      Two 1500mm x 750mm
          Tables and Pedestals                99      A Canon 'LX-250' Fax
                                                      Machine
  22      Two 4 Drawer Steel Filing
          Cabinets                         100 - 102 A Similar Lot
  23      A Grey Melamine Computer         103 - 109 Blank Lot
          Workstation
                                                         STORAGE CABINETS /
  24      A Similar Lot                                      RACKING
  25      A Quantity of Office Furniture     110      A Marcadet Mobilier Steel
          as Lotted                                   Tambour Front Cabinet
  26      A Karcher 'HD655S' Mobile          111      A Steel Storage Cabinet
          Pressure Washer
                                             112      A JEC Steel Tambour Front
  27      A Bosch 'GSB 20-2RE' Power                  Cabinet
          Drill
                                             113      A Tiro-Clas 8 Drawer Steel
  28      A Quantity of Tool Boxes                    Tool Cabinet (No Lock)
29 - 32   A Similar Lot                      114      A Paraloi 13 Drawer Steel
  33      A Trau 1500mm x 450mm x                     Tool Cabinet Including
          950mm High 2 Door                           Contents
          Stationery Cupboard                115      A Ronics 950mm x 420mm x
                                                      1950mm High Steel Cabinet
  34      A 6 Drawer Mobile Pedestal
           PERSONAL COMPUTERS                116      A Similar Lot

              (Specification of the          117      A 5 Shelf Adjustable Height
               Computers will be                      Light Duty Steel Rack
               displayed on each             118      A 1500mm x 750mm Double
                 individual lot)                      Pedestal Desk
  35      Two Various Personal               119      A Tiro-Clas 2m x 1m Double
          Computers                                   Pedestal Workbench Fitted
36 - 64   A Similar Lot                               Electrics and Overshelf

  65      Blank Lot                          120      A Similar Lot

  66      A Computer Monitor
121   A Tiro-Clas 2m x 1m Double        146     A 2m x 750mm Melamine
      Pedestal Workbench Fitted                 Table
      Electrics, Overshelf and Vice
                                        147     A 1m x 540mm x 1970mm
122   Two Overtoom Int. Steel                   High 2 Door Steel Cabinet
      Multidrawer Cabinets
                                        148     A Similar Lot
123   A Facom 'Chrono 5' 5 Drawer
                                        149     A Tiro-Clas 2 Door Steel
      Steel Mobile Tool Box
                                                Cabinet
124   A 5 Shelf Light Duty Rack
                                        150     Five Grey Steel Light Duty
125   A Tiro-Clas 1.5m x 400mm x                Racks
      2m High Steel Work Stand
                                        151     Two Single Bay Light Duty
126   A Similar Lot                             Adjustable Racks
127   A Paraloi 13 Drawer Steel         152     A Steel Adjustable Rack
      Tool Cabinet
                                        153     A Metrise Full Height Steel
128   A Paraloi 15 Drawer Steel                 Cabinet
      Tool Cabinet
                                        154     Three Single Bay Light Duty
129   A Tiro-Clas 14 Drawer Steel               Racks
      Tool Cabinet
                                        155     A Steel 2 Door Stationery
130   A Similar Lot                             Cabinet
131   A 17 Drawer Steel Tool          156 - 170 Blank Lot
      Cabinet
                                        171     A Set of Manutan 5 Tread
132   A 2 Bay Light Duty Adjustable             Warehouse Steps
      Rack
                                        172     A Similar Lot
133   A Tiro-Clas 2m x 1m Double
                                        173     A Set of GS 'EN131' 150kg 3
      Pedestal Workbench Fitted
                                                Tread Aluminium Steps
      Electrics and Overshelf
                                        174     A Set of GS 'EN132' 150kg 3
134   A Tiro-Clas 21 Drawer Steel
                                                Tread Aluminium Steps
      Tool Cabinet
                                        175     A Set of Tubeca 10 Tread
135   A Light Duty Adjustable Rack
                                                Aluminium Steps
136   A                                 176     A Set of Helwal 'Serie Pro'
                                                150kg 9 Tread Aluminium
137   A 11 Drawer Steel Tool                    Steps
      Cabinet
                                        177     A Set of 150kg 3 Tread
138   A Tiro-Clas 14 Drawer Steel               Aluminium Steps
      Tool Cabinet
                                        178     A Similar Lot
139   A Steel Storage Cabinet with
      Adjustable Shelf                  179     Blank Lot
140   A Pigeon Hole Compartment                   ESD BENCHES / CHAIRS
      Cabinet                           180     An Acial 'S3D' Adjustable
141   A Tiro-Clas 2m x 1m Double                ESD Electronic Test Bench
      Pedestal Workbench Fitted                 Fitted Electrics and Shelf
      Electrics and Overshelf           181     An Acial 'S3D' Adjustable
142   A Tiro-Clas 2m x 1m Double                ESD Electronic Test Bench
      Pedestal Workbench Fitted                 Fitted Electrics and Light
      Electrics                         182     An Acial 'S3D' Adjustable
143   Two Steel Racks                           ESD Electronic Test Bench
                                                Fitted Electrics, Light and
144   A 1.5m x 750mm Double                     Shelf
      Pedestal Desk
                                      183 - 214 A Similar Lot
145   Two Single Bay Light Duty
      Adjustable Racks                215 - 216 Blank Lot
  217     An Acial 'S3D' Adjustable                   ESD TROLLEYS / RACKS
          ESD Electronic Test Bench
                                            323     A Quantity of Sofanem ESD
          Fitted Electrics, Light and
                                                    Mobile Adjustable
          Shelf
                                                    Height/Angle Work Holders
218 - 265 A Similar Lot
                                            324     A Similar Lot
  266     Blank Lot
                                            325     A Quantity of ESD Multi
  267     An Acial 'S3D' Adjustable                 Drawer Small Parts Storage
          ESD Electronic Test Bench                 Units
          Fitted Electrics, Light and
                                            326     A Fuji 3 Tier PCB Board
          Shelf
                                                    Holder
268 - 277 A Similar Lot
                                            327     Five Innovative 'PC130E'
278 - 279 Blank Lot                                 Adjustable Multi Tier Antistatic
                                                    Board Handling Trolleys
  280     A Tiro-Clas 1800mm x
          750mm Adjustable ESD
          Electronic Test Bench           328 - 331 A Similar Lot
  281     A Tiro-Clas 1600mm x              332     A Quantity of Sameto
          750mm Adjustable ESD                      Technifil Multi Tier Anti Static
          Electronic Test Bench Fitted              Board Racks
          Electrics, Light and Shelf      333 - 335 A Similar Lot
  282     A Tiro-Clas 1600mm x              336     Three Fuji Anti Static Mobile
          630mm Adjustable ESD
                                                    Steel Operators Trolleys With
          Electronic Test Bench Fitted
                                                    Feeder Holder
          Electrics, Light and Shelf
                                          337 - 338 A Similar Lot
  283     A Tiro-Clas 1270mm x
          630mm Adjustable ESD              339     Two 3 Tier ESD Adjustable
          Electronic Test Bench Fitted              Height Trolleys
          Electrics, Light and Shelf
                                          340 - 342 A Similar Lot
284 - 285 Blank Lot
                                            343     Three ESD Test Fixture
  286     A Tiro-Clas 1270mm x                      Trolleys
          630mm Adjustable ESD
                                            344     A Quantity of Steel Low Level
          Electronic Test Bench Fitted
                                                    Tables
          Electrics, Light and Shelf
                                            345     A Similar Lot
  287     A Similar Lot
                                            346     A Quantity of Steel Tables
  288     A 2000mm x 1000mm ESD
          Electronic Test Bench With        347     A Similar Lot
          Left Hand Return and Shelf
                                            348     Five Inter Metro ESD Fully
  289     Six Acial Adjustable ESD                  Adjustable Board Handling
          Electronic Test Bench With                Trolleys
          Electrics, Lights and Shelves
                                          349 - 350 A Similar Lot
          (*nb. Dismantled)
                                            351     Seven ESD Mobile Trolleys
  290     Blank Lot
                                                    With Sliding Shelf Units
  291     Five Cazzard Blue
                                            352     Eight Sameto Multi Tier ESD
          Upholstered ESD Operators
                                                    Reel Storage Racks
          Chairs
                                            353     Six Custom Made Multi Tier
292 - 317 A Similar Lot
                                                    ESD Reel Storage Racks
  318     Blank Lot
                                            354     Three 3 Tier ESD PCB Board
  319     A Quantity of Various                     Handling Trolleys
          Upholstered ESD Operators
                                            355     A Similar Lot
          Chairs
                                            356     Five Multi Tier ESD PCB
320 - 321 A Similar Lot
                                                    Board Handling Trolleys
  322     Blank Lot
  357     A Quantity of Multi Tier ESD    387   A Quantity of Hand Tools
          Trolleys
                                          388   A Similar Lot
  358     A Similar Lot
                                          389   An Avdel Textron 'MA30124'
  359     A Quantity of Various Size            Riveting Machine S/n
          Mobile ESD Tables                     1404567 (1999)
  360     A Quantity of Anti Static Lin   390   A Quantity of Deprag
          Bins                                  Pneumatic Drivers
  361     A Similar Lot                   391   A Concoat 'DC-2000' PCB
                                                Varnish Dipping Tank
  362     A Quantity of Scotch
          Sellotape Reel Holders          392   A Bioblock '88169' Ultrasonic
                                                Cleaner
  363     A Qty of 3M Wrist Straps and
          Grounding Systems               393   A Techcon 'TS9150E'
                                                Vacuum Glue Dispenser
  364     A Delvo 'DLV7333' Electric
          Power Screw Driver,             394   Blank Lot
          Controller and Static Balance
                                          395   A Dupont '193648-01' Manual
          SCREWDRIVING / RIVETING               Bench Press
                / PRESSES
                                          396   A Mader 'TOKD31HV' Manual
  365     A Delvo 'DLV8530-PKE'                 Hand Press
          Electric Power Screw Driver
                                          397   Two Mader 'APZT1' 1.5 KN
          with Power Supply and Static
                                                Manual Punches
          Balance
                                          398   A Sartec Manual Punch
366 - 368 A Similar Lot
                                          399   A Facom '1150MT' Universal
  369     A Delvo 'DLV7530-PKE'
                                                Vice
          Electric Power Driver and
          Static Balance                  400   An FTM 'DT3.N' Heated Wire
                                                Stripper
370 - 372 A Similar Lot
                                          401   Two Fisher Bioblock Portable
  373     A Delvo 'DLV7530-PKE'
                                                Ultraviolet Lights
          Electric Power Driver and
          Static Balance (No Cable)       402   Three Heat Guns
  374     A Delvo 'DLV8130-JKF'           403   An Avdel Textron 'G1'
          Electric Power Screw Driver           Pneumatic Rivet Gun
          and Static Balance
                                          404   A Similar Lot
375 - 376 A Similar Lot
                                          405   An Avdel '7530' Fastening
  377     A Delvo 'DVL7130-PKE'                 Tool And Pump
          Electric Power Screw Driver
                                          406   A Hade Tape Dispenser
          and Static Balance
                                          407   Two Manual Punches
  378     A Similar Lot
  379     A Delvo 'DVL7130-PKE'           408   An Assembly Automation
          Electric Power Screw Driver           'SAIM' Pneumatic Assembly
                                                Line Automatic Screw Feeder
  380     A Similar Lot                         with Densei 'DLV 7333'
                                                Electric Screwdriver S/n
  381     An Eliza 'ELI15P' Electric
                                                5007254
          Power Screw Driver with
          Controller                      409   A Similar Lot
  382     An Eliza 'ELI15P' Electric
          Power Screw Driver with
          Controller and Power Supply
383 - 385 A Similar Lot
  386     Four Delvo 'ELI15P' Power
          Supplys and Assorted Screw
          Drivers and Leads
               SOLDERING /                  509     Blank Lot
           DESOLDERING / REWORK
                                            510     A Weller 'WHA700' Hot Air
                 STATIONS
                                                    Soldering Rework Station with
  410     An Air-Vac 'DRS-21' Re-                   HAP3 Head
          Work Station with Wild
                                            511     A Similar Lot
          Microscope Head,
          Panasonic 'GL110' Colour          512     A Weller 'AG701' Soldering
          Camera, JVC Colour                        Rework Station
          Monitor and Light Source
                                            513     A Similar Lot
  411     A Zevac 'DRS-21' Chip Re-
                                            514     Blank Lot
          Work Station with Wild
          Microscope Head and               515     A Weller 'EC2002' Anti Static
          Panasonic 'WVCD110AF'                     Soldering Station
          Camera with JVC Monitor
                                          516 - 549 A Similar Lot
          and Light Source
                                            550     Blank Lot
  412     Blank Lot
                                            551     A Pace 'Sensa Temp'
  413     A Davum TMC 'Scalpel Ultra-               Soldering Iron
          Sons US250' Heated Blade
                                            552     A Similar Lot
  414     A Hakko '470' De-soldering
          Tool                              553     Blank Lot
415 - 427 A Similar Lot                     554     A Metcal 'BVX100' Fume
                                                    Extraction System
  428     Blank Lot
                                          555 - 583 A Similar Lot
  429     A Metcal 'STSS-PS2V-02'
          Soldering Station                 584     A Quantity of Solder Tips
430 - 452 A Similar Lot                     585     A Quantity of Water Bottles
  453     A Metcal 'STSS-002'               586     A Quantity of Solder Reel
          Soldering Station                         Holders
454 - 472 A Similar Lot                   587 - 590 A Similar Lot
  473     Blank Lot                         591     A Quantity of Soldering Iron
                                                    Spares
  474     A Metcal 'STSS100E'
          Soldering Station                 592     A Similar Lot
  475     A Metcal 'MX500P' Soldering       593     A Quantity of Solder
          Power Supply                      594     A Quantity of Metcal ACT
476 - 479 A Similar Lot                             Solder Tip Stands
  480     Blank Lot                                  INSPECTION EQUIPMENT
  481     A Weller 'REP A' Chip Rework      595     A Waldmann 'RLL122 Series'
          Station                                   Bench Type Angle Poise
                                                    Magnifier Light
  482     A Weller 'WMD1' Multi Digital
          Soldering Re-Work Station       596 - 637 A Similar Lot
                                            638     A Waldmann 'FGL111' Bench
483 - 494 A Similar Lot                             Type Angle Poise Magnifier
                                                    Light
  495     A Weller 'WMA-1' Multi
          Analog Soldering Re-Work          639     A Similar Lot
          Station
                                            640     Blank Lot
496 - 499 A Similar Lot
                                            641     A Testut '1000' 60kg x 100g
  500     Blank Lot                                 Bench Dial Type Scale
  501     A Weller 'WSD50' Soldering        642     A Sartorius 'MAF200'
          Station                                   Universal Digital Pan Scale
502 - 508 A Similar Lot
  643     A Sartorius 'MD-AF100 '            689     A Tektronix 'THS720A'
          Analytical Balance                         100MHz Real-Time 500MS/s
                                                     Digital Oscilloscope
644 - 645 A Similar Lot
                                             690     A Hewlett Packard '1740A'
  646     A Sartorius 'Basic' Analytical
                                                     100MHz Oscilloscope
          Balance
                                             691     A Hewlett Packard '54201D'
  647     A Precia 'CM81' Digital Scale
                                                     Digitising Oscilloscope
  648     A Precia 'Quartz C' 3kg x 1g
                                           692 - 693 A Similar Lot
          Electronic Scale
                                             694     A Hewlett Packard '3325B'
  649     A Soehale '7741' 20kg x 10g
                                                     Synthesizer/Function
          Electronic Scale
                                                     Generator
  650     A Bioblock 'LB-3000' 3kg x
                                             695     A Hewlett Packard '3314A'
          0.1g Electronic Scale
                                                     Function Generator
  651     A Sony 'PVM-1143MD' Colour
                                             696     A Hewlett Packard '3478A'
          Video Monitor
                                                     Multimeter
  652     A Sony 'CCD Iris SSC-
                                             697     A Hewlett Packard '3468A '
          M350CE' Camera And
                                                     Multimeter
          Controller
                                             698     A Polar '950' Toneohm Multi
653 - 654 Blank Lot
                                                     Layer Shorts Locator
  655     A Leica 'M3C' Inspection
                                             699     A Similar Lot
          Microscope with 10X/21B Eye
          Pieces and Light Source            700     A Polar '550A' Toneohm
                                                     Shorts Locator
  656     A Similar Lot
                                             701     A Similar Lot
  657     A Motic Inspection
          Microscope with 10X/21 Eye         702     A Hewlett Packard '4952A'
          Pieces and Light Source                    Protocal Analyser
658 - 677 A Similar Lot                      703     A Hewlett Packard '5313A'
                                                     225 MHz Universal Counter
  678     Blank Lot
                                             704     Three Hewlett Packard
  679     A Quantity of Microscope
                                                     '37204' HP-IB Extenders
          Spares
                                             705     A Hunlron 'Protrack I' Tracker
  680     Blank Lot
                                                     Trouble Shooting System
               TEST EQUIPMENT
                                             706     A Merlin Gerin '34547' Test Kit
  681     A Textronix 'TDS 520A'
          500MHz Two Channel                 707     A Hy-Trak '100D' Digital Ohm
          Digitising Oscilloscope                    Meter
  682     A Tektronix 'TDS520'             708 - 713 A Similar Lot
          500MHz Two Channel
          Digitising Oscilloscope            714     Blank Lot

  683     A Tektronix 'TDS380' 400MHz        715     A Metrix 'MX553' Digital Volt
          Two Channel Digital Real                   Meter
          Time Oscilloscope                716 - 722 A Similar Lot
  684     A Lecroy '9361C' Dual              723     A Hewlett Packard '3456A'
          300MHz, 2.5 GS/s                           Digital Volt Meter
          Oscilloscope
                                             724     Blank Lot
685 - 687 A Similar Lot
                                             725     A Hewlett Packard '6038A' 0 -
  688     A Tektronix 'TDS360' 200MHz                60 V / 0 - 10A - 200W System
          Two Channel Real time                      Power Supply, Option 001
          Oscilloscope
  726     A Hewlett Packard '6038A' 0 -     759     A Schleuniger 'ES9300'
          60 V / 0 - 10A - 200W System              Component Former S/n 1279
          Power Supply                              (1999)
727 - 730 A Similar Lot                     760     An Ebsomat 'E40-1/4900'
                                                    Component Former S/n
  731     A Hewlett Packard '6038A' 0-
                                                    490133
          60 V / 0 - 10A - 200W System
          Power Supply                      761     Three O.La.me.f Pneumatic
                                                    Component Cutters
  732     A Similar Lot
                                          762 - 764 Blank Lot
  733     Five Samlex 'RPS1202P'
          Regulated D.C Power               765     A Dyamant Industrie 'VDE
          Supplies                                  800' Placement Vision
                                                    Inspection Machine S/n
  734     A Quantity of Uncalibrated
                                                    8006 (1999)
          Test Equipment
                                            766     Blank Lot
  735     Blank Lot
                                            767     A CAB 'Maestro 4M'
  736     A Zebra '140XiIII' Thermal
                                                    Depanelling Machine S/n
          Transfer Printer
                                                    0000885 103
737 - 738 A Similar Lot
                                            768     An Automation 'A400C' PCA
  739     A Zebra '140XiII' Thermal                 Water Clean Machine with
          Transfer Printer                          Wash, Rinse, Dry Process,
                                                    Belt Conveyor, IR and Air
  740     A Similar Lot                             Jets Dryer. (1997)
  741     A Zebra 'Z105' Thermal
                                            769     A Universal 'VCD-
          Transfer Printer
                                                    Sequencer 5 6241D' Axial
  742     Blank Lot                                 Lead Sequencer / Inserter
                                                    S/n 10012154 (1998) With 2
  743     A Eltron 'TLP-3742' Label                 x 20 Station Component
          Printer                                   Sequencer Modules
  744     A Eltron 'TLP-3642' Label
                                            770     A Universal 'Radial 5
          Printer
                                                    2.5/5.0/7.5 Triple Span
  745     A Similar Lot                             6369E' Radial Lead
                                                    Sequencer / Inserter S/n
  746     A TEC 'B-30-S2-FR P' Bar
                                                    10015112 (1998) With 20
          Code Printer
                                                    Station Component
  747     A UBI '501E' Easy Coder                   Sequencer Module
          Label Printer
                                            771     A Universal '6778A' Dip
  748     A Similar Lot                             Insertion Machine
749 - 751 Blank Lot                         772     A Mascot Laser Guided
  752     A J.Loupot 'MCK' Component                Insertion Machine With 2
          Cutter S/n 145 (1997)                     Robotas 50 Compartment
                                                    ESD Component
  753     Two O.La.me.f 'TP/6'                      Dispensers
          Component Formers
                                            773     Blank Lot
  754     A Similar Lot
                                                        WAVE SOLDERING
  755     Blank Lot
                                            774     A 5m Manual Assembly
  756     An Iteco '7915 026'                       Conveyor
          Component Former S/n
          95280 (1995)                      775     A Nutek PTE Ltd 'NT 410 L'
                                                    600mm Conveyor S/n 6331F
  757     An Iteco 'T915.100A'                      (1995)
          Component Former S/n
          105233 (1999)                     776     An Invicta 'W/O 2034'
                                                    Through Feed Foam Flux
  758     A Component Former                        Coating Machine S/n SS
                                                    SA102
  777     A SOLTEC 'DELTAWAVE              793     A Ffrginox 76.25.57.75
          6622CC' WAVE SOLDERING                   Stainless Steel Component
          MACHINE S/n 9712484301                   Refrigerator
          (1997) With Infeed and
                                                   (Escorted Viewing Only to
          Outfeed Cooling Conveyor
                                                   View Lot 793)
                                           794     A Memmert '1140' 220° Max.
  778     A Soldering Spray Station                Environmental Oven S/n 870
          With Extraction Hood                     073
  779     Blank Lot                        795     Blank Lot
  780     An Air-Vac 'PCBRM-10'            796     An Ultrasons Annemasse
          Solder Melting Station With              'SFRM40' Ultrasonic Cleaner
          Extraction Hood                          S/n 8892 (1983)
  781     Blank Lot                        797     A Facis Chiller
  782     A 5m Manual Assembly             798     A Flonic Schlumberger
          Conveyor                                 'UV525' Environmental
  783     AN ELECTROVERT                           Chamber S/n 83.219
          'EUROPAK-II/400F SMT'          799 - 800 Blank Lot
          WAVE SOLDERING
          MACHINE S/n                      801     A Climats 'MH300'
          M0880812010/LV089                        Environmental Chamber S/n
                                                   1041 (1984)
  784     A Fuji Transfer Conveyor
          (1992)                         802 - 803 Blank Lot
  785     A Seho Cooling Tunnel S/n                         SMT LINE 1
          204.0195-9209 (1992)             804     A FUJI 'CP-6E' TURRET
  786     A Holding Station                        CHIP SHOOTER WITH 20
                                                   PLACEMENT HEADS USING
  787     A 1500mm x 800mm                         6 NOZZLE WINDMILLS,
          Stainless Steel Extraction               MAXIMUM FEEDER
          Hood Mixing Tank                         CARTRIDGE CAPACITY OF
788 - 789 Blank Lot                                140 8W X 4P FEEDERS,
                                                   PCB SIZE WIDTH 45MM -
              INSPECTION / TEST                    350MM (1 3/4"-14"), PCB
                  MACHINES                         LENGTH MAX OF 430 MM
  790     An ICOS 'LI-2040' Manual                 (18") APPROX. NOZZLE
          Positioning Comparity                    SIZES FROM 0.7MM TO
          Checking Machine S/n                     7MM, FRONT OR BACK
          32538 With PC Control                    LIGHTING FOR
                                                   COMPONENT
  791     A Ram Optical                            RECOGNITION, GREY
          Instrumentation 'OMIS III'               SCALE FIDUCAL CAMERA,
          Optical Measurement                      COMPONENT SIZE FROM
          Inspection System S/n                    0402 CHIP TO 16MM QFP,
          651192606 (1992) With                    MAX PLACEMENTS PRE
          Optical Video Probe, 2 Light             HOUR 36000, PLACEMENT
          Sources, '3000' Digital                  ACCURACY 0.05MM RUN
          Crosshair Generator, Focus               HOURS,= 12531 S/n 614
          Bar, Sony Trinitron Monitor              (1995)
          and PC Control


  792     A Metronelec 'LD5800'
          Wetting Balance
          Meniscograph S/n 305 With
          PC Control
805   A FUJI 'IP III E' FINE PITCH      814     A Dyamant Industrie 'CT-06-B'
      PLACEMENT MACHINE                         600mm Inspection Conveyor
      WITH 2 HEADS ON FIXED                     S/n 1412 (2000)
      GANTRY, EACH HEAD HAS
                                        815     A Nutek PTE Ltd 'NT800EC'
      1 PLACEMENT HEADS, 2
                                                1.3m Edging Conveyor S/n
      REMOVABLE MULTI
                                                4160-1 (1993)
      FEEDER UNIT HOLDING A
      MAXIMUM OF 76 12W X 8P            816     A Dyamant Industrie 'CT-06-B'
      FEEDERS, CHANGEABLE                       600mm Conveyor S/n 1405
      NOZZLE SIZES FROM 1MM
      TO 20MM, FRONT AND                817     A Similar Lot
      BACK LIGHTING FOR
      COMPONENT                         818     A Fuji 600mm Conveyor
      RECOGNITION, CAMERAS              819     A Fuji 'CACE4100B' 1m
      USE GREY SCALE,                           Conveyor S/n 95FBE0073
      COMPONENT SIZES FROM                      (1995)
      0804 CHIP TO 54MM QFP
      APPROXIMATELY, MAX              820 - 821 Blank Lot
      PLACEMENTS PRE HOUR
                                                         SMT LINE 2
      4000 APPROXIMATELY,
      PLACEMENT ACCURACY                822     A THERMATECH
      0.01MM, PCB SIZE WIDTH                    'M450LCV2' 4 ZONE
      45MM - 350MM (1 3/4"-14"),                REFLOW OVEN, LEFT TO
      PCB LENGTH MAX OF 430                     RIGHT FLOW, APPROX
      MM (18") S/n 591 (1996)                   RUN HOURS = 50460 S/n
      WITH 'MTU-IVE' TRAY                       95330 (1995)
      FEEDER
                                        823     A Fuji 600mm Conveyor
                                        824     A Fuji Bare Board Loader

806   A THERMATECH 'M450                825     A Nutek 'NT510ICL' 1.5m
      LCV2' 4 ZONE REFLOW                       Inspection Conveyor S/n
      OVEN, LEFT TO RIGHT                       6142D (1995)
      FLOW, APPROX RUN                  826     A Fuji 1m Conveyor
      HOURS = 50521 S/n 95331
      (1995)                            827     A Fuji 'LGCE40110B'
                                                1650mm Lift Gate Conveyor,
807   A Dyamant Industrie 'LD-4-B'              Left to Right Flow
      Magazine Loader S/n 155
      (2000)                            828     A Dyamant Industrie 'CT-06-B'
                                                600mm Conveyor S/n 1513
808   A Fuji 500mm Flip Over Board              (2000)
      Conveyor
                                        829     A Fuji 600mm Conveyor
809   A Fuji 1m Inspection
      Conveyor S/n 94FB0249 With        830     A Fuji 'CACE4100B' 1m
      Microscope And Lightsource                Conveyor S/n 95FBE0006
                                                (1995)

810   A Dyamant Industrie 'CT-06-B'     831     A Fuji 600mm Conveyor
      600mm Conveyor S/n 1411           832     A Nutek PTE Ltd 'NT800EC'
                                                1.3m Edging Conveyor S/n
811   A Fuji 'LGCE40110B'                       4160-3 (1993)
      1650mm Lift Gate Conveyor
                                        833     A Dyamant Industrie 'UD 4 B'
      S/n 95FLE0006 (1995)
                                                Magazine Unloader, Left to
812   A Dyamant Industrie 'CT-06-B'             Right Flow S/n 317 (1996)
      600mm Conveyor S/n 1410
                                      834 - 835 Blank Lot
      (2000)
813   A Dyamant Industrie 'CI
      102VB' 1m Inspection
      Conveyor S/n 2568 (2000)
                  SMT LINE 3              853   A FUJI 'GLV-5000' GLUE
                                                DISPENSING MACHINE,
  836     A FUJI 'GSP-II 4000'
                                                0.13 SEC/DOT, MAX. 5000
          STENCIL PRINTER S/n 733
                                                SEQUENCES/PROGRAM,
          (1988) With Hitachi
                                                GLUE APPLICATION
          Coolshot 'SR-16F1' Air
                                                ACCURACY +/- 0.15mm,
          Conditioning Unit
                                                MAX PCB SIZE: 508 x
  837     AN ELECTROVERT                        457mm, MIN PCB SIZE 80 x
          'AT2000CR' CONTROLLED                 50mm. S/n 581 (1992)
          ATMOSPHERE FORCED
          CONVECTION REFLOW               854   A FUJI 'CP-6E' TURRET
          SYSTEM S/n 11872389                   CHIP SHOOTER WITH 20
          (1998)                                PLACEMENT HEADS USING
                                                6 NOZZLE WINDMILLS,
  838     A Fuji 'MNCE4050B'                    MAXIMUM FEEDER
          Magazine Loader, Left to              CARTRIDGE CAPACITY OF
          Right Flow S/n 95FNE0019              140 8W X 4P FEEDERS,
          (1995)                                PCB SIZE WIDTH 45MM -
  839     A Fuji Bare Board Loader              350MM (1 3/4"-14"), PCB
                                                LENGTH MAX OF 430 MM
  840     A Fuji 600mm Conveyor                 (18") APPROX. NOZZLE
  841     A Dyamant Industrie 'CT 12 B'         SIZES FROM 0.7MM TO
          1.2m Inspection Conveyor S/n          7MM, FRONT OR BACK
          228 (1996)                            LIGHTING FOR
                                                COMPONENT
  842     A Fuji 1m Conveyor                    RECOGNITION, GREY
  843     A Dyamant Industrie 'CT 06            SCALE FIDUCAL CAMERA,
          VA' 600mm Conveyor S/n 244            COMPONENT SIZE FROM
          (1996)                                0402 CHIP TO 16MM QFP,
                                                MAX PLACEMENTS PRE
  844     A Fuji 1m Conveyor                    HOUR 36000, PLACEMENT
  845     A Dyamant Industrie 'CT 06            ACCURACY 0.05MM RUN
          VA' 600mm Conveyor S/n 243            HOURS = 12,779 S/n 618
          (1996)                                (1995)

  846     A Fuji 'CACE4060B' 600mm
          Conveyor (1995)
  847     A Nutek PTE Ltd 'NT 510 ICL'
          1.5m Inspection Conveyor S/n
          6331-C
  848     A Fuji 600mm Conveyor
  849     A Fuji 'CACE4100B' 1m
          Edging Conveyor S/n
          95FBE0005 (1995)
850 - 851 Blank Lot
                  SMT LINE 4
  852     A FUJI 'GSP-II 4000'
          STENCIL PRINTER S/n 1077
          (1990) With Hitachi
          Coolshot 'SR-16F1' Air
          Conditioning Unit
855   A FUJI 'IP II -4000' FINE         868     A Fuji 'MUC-5040' Magazine
      PITCH PLACEMENT                           Unloader, Left to Right Flow
      MACHINE WITH 2 HEADS
                                        869     Blank Lot
      ON FIXED GANTRY, EACH
      HEAD HAS 2 PLACEMENT              870     A FUJI 'GL II 4000' HIGH
      HEADS, 1 WITH FIXED                       SPEED ADHESIVE GLUE
      NOZZLE THE OTHER                          DISPENSING MACHINE,
      CHANGEABLE, 2                             SPEED 0.2 SEC/DOT, MAX
      REMOVABLE MULTI                           PCB SIZE = 457 x 356mm
      FEEDER UNIT WITH                          AND FIDUCIAL
      MAXIMUM CAPACITY OF 76                    CORRECTION S/n 1645
      12W X 8P FEEDER, NOZZLE                   (1992) WITH HITACHI 'SR 16
      SIZES FROM 1MM TO                         F1' AIR CONDITIONING
      10MM, BACK LIGHTING                       UNIT
      FOR COMPONENT
      RECOGNITION, CAMERAS            871 - 872 Blank Lot
      USE BINARY SCALE,
      COMPONENT SIZES FROM                        BOARD HANDLING AND
      0804 CHIP TO 54MM QFP                           CONVEYORS
      APPROXIMATELY, MAX                873     A Dyamant Industrie 'CO 90
      PLACEMENTS PRE HOUR                       B' 500mm Conveyor S/n 521
      4000 APPROXIMATELY,                       (1998)
      PLACEMENT ACCURACY
      0.02MM, PCB SIZE WIDTH            874     A Fuji 1m Conveyor With
      45MM - 350MM (1 3/4"-14"),                Sony 'CCD IRIS' Colour Video
      PCB LENGTH MAX OF 430                     Camera
      MM (18") S/n 576 (1990)           875     A Nutek PTE Ltd 'NT510 ICL'
      WITH TRAY FEEDER                          1.5m Conveyor S/n 6331-B
                                                (1995)
                                        876     A Similar Lot
856   A BTU INTERNATIONAL               877     A Fuji 'MUC-5040' Conveyor
      'BTUK-129' REFLOW OVEN,                   With Air Ioniser 9000 Ioniser
      LEFT TO RIGHT FLOW S/n
      129 (1992)                        878     A Similar Lot

857   A Fuji 'MNC-5040' Magazine        879     A Dyamant Industrie 'CT-06-
      Loader, Left to Right Flow                VA' 600mm Conveyor S/n 246
                                                (1996)
858   A Fuji Bare Board Loader
                                        880     A Fuji 90° Turn Unit
859   A Dyamant Industrie 'CT-06-
      VB' 600mm Conveyor S/n          881 - 883 A Similar Lot
      1419 (2000)                       884     A Fuji 1m Conveyor
860   A Fuji 600mm Conveyor             885     A Dyamant Industrie 'LD 4 B'
861   A Dyamant Industrie 'CT 12 B'             Magazine Loader S/n 114
      1.2m Inspection Conveyor S/n              (1996)
      229 (1996)                        886     A Fuji 600mm Conveyor
862   A Fuji 1m Conveyor                887     A Dyamant Industrie 'CT-06-
863   A Fuji 600mm Conveyor                     VA' 600mm Conveyor S/n 245
                                                (1996)
864   A Similar Lot
                                        888     A Nutek PTE Ltd 'NT410L'
865   A Fuji 1.2m Inspection                    600mm Conveyor
      Conveyor
866   A Fuji 'CACE4060B' 600mm
      Conveyor S/n 95FAE0030
      (1995)
867   A Nutek PTE Ltd 'NT800 EC'
      Edging Conveyor S/n 4160-2
      (1993)
  889     A Jot Set Top Box                944     A Fuji '08XMulti Pitch TE' IP
          Assembly+G990 Line                       Feeder
          Comprising of Twin Track
                                           945     Ten Fuji '12xMulti Pitch TE' IP
          27.25m Continuous Belt
                                                   Feeders
          Conveyor (6 x 4m, 1 x
          3.25m), 2 x 2.2m Cross Feed      946     Seven Fuji '12XMulti Pitch TE'
          Conveyors, 2 Test Stations,              IP Feeders
          4 Assembly Stations and 1
          x 3 Station 12m Test Line        947     Five Fuji '12X08TE' IP
                                                   Feeders
                                           948     Eleven Fuji '16XMulti Pitch
          (Escorted Viewing Only to                TE' IP Feeders
          View Lot 889)
                                           949     Ten Fuji '16XMulti Pitch TE' IP
  890     Blank Lot                                Feeders
                      FEEDERS              950     Eleven Fuji '16X08TE' IP
                                                   Feeders
  891     Ten Fuji '08X04TDB1.0' CP6
          Feeders                          951     A Similar Lot
892 - 910 A Similar Lot                    952     Ten Fuji '16X12TE' IP
                                                   Feeders
  911     Sixteen Fuji '08X04TDB1.0'
          CP6 Feeders                      953     Nine Fuji '16X12TE' IP
                                                   Feeders
  912     Ten Fuji '08x04TD B1.3' CP6
          Feeders                          954     Three Fuji '24XMulti Pitch TE'
                                                   IP Feeders
913 - 915 A Similar Lot
                                           955     Twelve Fuji '24X08TE' IP
  916     Fourteen Fuji '08x04TD B1.3'
                                                   Feeders
          CP6 Feeders
                                           956     Eleven Fuji '24X08TE' IP
  917     Ten Fuji '08x04TEB1.0' CP6
                                                   Feeders
          Feeders
                                           957     Five Fuji '24X12TE' IP
918 - 919 A Similar Lot
                                                   Feeders
  920     Eight Fuji '08x04TEB1.0' CP6
                                         958 - 963 A Similar Lot
          Feeders
                                           964     Eleven Fuji '32X08TE' IP
  921     Ten Fuji '08X04TEB1.3' CP6
                                                   Feeders
          Feeders
                                           965     Five Fuji '32X12TE' IP
922 - 927 A Similar Lot
                                                   Feeders
  928     Twelve Fuji '08X04TEB1.3'
                                         966 - 969 A Similar Lot
          CP6 Feeders
                                           970     Seven Fuji '44X08TE' IP
  929     Ten Fuji '12X08TEB2.5' CP6
                                                   Feeders
          Feeders
                                           971     Six Fuji '44X08TE' IP Feeders
930 - 935 A Similar Lot
  936     Eight Fuji '12X08TEB2.5' CP6     972     Six Fuji '44X12TE' IP Feeders
          Feeders
  937     Ten Fuji '16X08TEB3.7' CP6       973     A Similar Lot
          Feeders                          974     Three Assorted Fuji Feeders
938 - 939 A Similar Lot                    975     Nine Hewlett Packard PGP
  940     Twelve Fuji '16X08TEB3.7'                Stick Feeders
          CP6 Feeders                      976     A Quantity of PCB Magazine
  941     Eight Fuji '16X12TEB3.7' CP6             Holders
          Feeders                          977     A Fuji Mobile Storage Rack
  942     Nine Fuji '24X12TEB5.0' CP6    978 - 981 A Similar Lot
          Feeders
  943     A Similar Lot
  982     Three Dek Screen Printer             999    A Similar Lot
          Frame Storage Racks
                                              1000    A 3M-Matic '28900' Case
  983     Blank Lot                                   Sealing System S/n 1246
                                                      With Roller Conveyor
           ENGINEERING / STORES
                 SPARES                    1001 - 1010 Blank Lot
  984     An Alcera '7S' Universal
          Milling Machine S/n 18835/12
          80 (1980) With 1200mm x                       END OF SALE
          270mm 'T' Slotted Table

          (Escorted Viewing Only to
          View Lot 984)
  985     A Quantity of Caddie '500kg'
          Warehouse Caged Trolleys
  986     Three Manutan Warehouse
          Caged Trolleys
987 - 988 Blank Lot
            INTERNAL TRANSPORT
  989     A Fenwick-Linde 'E15'
          1500kg Battery Electric
          Forklift Truck S/n
          324B03075815 (1991)
          (Lot 989 is not available for
          collection until Wednesday
          25th June 2003)

  990     An MIC Swift 'EMC 02 G-117-
          100E' 200kg Battery Electric
          Stacker Truck S/n 12814
          (2000)
  991     A Fenwick-Linde 'L10' 1000kg
          Battery Electric Stacker Truck
          S/n W4X379L02352 (2000)

  992     A Genie Lift 'PLI-19' 5.8m
          Personnel Lift Access
          Platform S/n 3195-4526F
          (1995)
          (Lot 993 is not available for
          collection until Friday 27th
          June 2003)
  993     A Manutan 'ST13-111' 700kg
          Manual Stacker Truck
  994     Blank Lot
  995     A BT 'BTL 2000/7' 2000kg
          Pallet Truck
  996     A Fenwick 'M20 54-115'
          2000kg Pallet Truck
  997     Blank Lot
  998     A Hymo 1000kg Floor Pallet
          Scale
                                  PURCHASERS BUYING ORDER
For the convenience of Buyers who may wish to make purchases, but who do not wish to attend
the sale, the Auctioneer will arrange to bid on their behalf if the orders are sent in on the subjoined
form. A prior inspection on the specified View Days is, however, advised.
The Auctioneers shall not be liable for any neglect, default or failure in executing bids nor any
liability arising thereto.

Date    .........................................

To:     Henry Butcher                                                              Tel:                 +44 (0) 20 7405 8411
        Brownlow House                                                             Fax:                 +44 (0) 20 7916 5442
        50/51 High Holborn
        London WC1V 6EG                                                            e-mail: sales@henrybutcher.com
Please bid on our behalf at the below-named sale for any undermentioned lots, at or under the limit
marked against them.

We enclose a cheque for £ ............... being 25% of the estimated amounts of the purchase money,
and in event of you buying any lots for us we undertake to pay for, and remove, the goods in
conformity with the Conditions of Sale and Notice to Purchasers.

 Location Town of Sale                                                         Date of Sale
 Grenoble, France                                                              Thursday 12th June 2003
      Lot                                                      Description                                              Limit of Price




This order is given on the understanding that a 10% Buyer's Premium plus Value Added
Tax will be levied on the "Hammer Price" and will be charged over and above the limit
placed by you on this order.

Name                .................................................................................

Address             .................................................................................

                    .................................................................................

Telephone           ........................................       Signature ...............................................

Fax                 ………………………………                                   E-mail: ……………………………......……

 A MINIMUM BID OF £25.00 PER LOT WILL ONLY BE ACCEPTED ON THE ABOVE FORM
               NOTES
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________

								
To top